HP LaserJet 1300 not connected for more than 1 day

Since Apple came out with the Yosemite printing system, I cannot print wirelessly for more than one day. I have reset my modem, changed the location of my network, unplugged and repowered Airport Extreme, started in Safe Mode, and more.
No matter what I do: I either get: a printer name with a number in parenthese or a long Bonjour number when deleting and adding a printer on my laptop.
Whatever I do, it only works from about 24 to 36 hours. Then when i go to print it says Printer is Not Connected. I can delete and add again, usually it will find the printer, add it, print, and then a day or two later, the printer is not connected again.
But I have to keep redoing this both to my laptop and my wife's, and we have not had reliable printing since Yosemite cane out about October 18, 2014.
Equipment
iMac:
Operating Sysem: 10.10.1
Printer: HP LaserJet 1300
Network: Comcast
Router: Airport Extreme
The only thing I have not done I can think of is reset Airport Extreme. I can do that, but don't know if I will then have additional problems.
This all started with the YIosemite update but at this point I don't know if it is an HP-related problem or a general Yosemite-related problem.
I appreciate any help I can get. Have wasted probably 40 hours over two-plus months trying to get this fixed. When Apple could not fix it back in October, the person referred me to HP. The person at HP Business did not know my printer was supported for Yosemite although his own web site said it was. So that was not much help And after resetting printers, deleting and adding printers, etc., I don't know what else to do.
Thanks for listening.

Did it start not syncing after the iOS 4.2 update?

Similar Messages

Bought a ipod nano 6th and is not playing for more than 2 min?

bought a ipod nano 6th and is not playing for more than 2 min?

The most likely problem is that the headset is not inserted fully. When you insert the headset, you should feel and hear a "Click" to let you know it is inserted all the way.
The problem is that if it is not inserted all the way, the nano does not detect it. If it is not detected, it will pause playback when the screen goes dark. This is to keep your battery from draining when there is nothing connected to listen to the music.
i

After installing the 8.1 update the Internet Sharing won't allow any devices to stay connected for more than a few hours.

Internet sharing is turned "on" and appears to be working, but really isn't. Locking the screen, restarting, or a hard reboot helps, but it is extremely aggravating not to be able to maintain a connection for more than a few hours at a time!

Thank you so much for the info! I apologize for having asked for your device model as that is the forum you posted to. Also, I know that we've set the expectation that the device will remain connected as long as a demand for signal flows through it, but that may not be entirely the case. After a period of constant use, any device (including the Lumia 822) may require or force itself to stop.
You've mentioned that the device will freeze after a few hours usage. Is the device also connected to the charger while being used as a hotspot? If so, do you notice the device getting warmer than it normally would be?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

LSMW For Converting Open Sales Orders (not working for more than 1 item)

Hi,
I am using following standard object for Open sales orders .
Object               0090   Sales documents
Method               0000
Program Name         RVINVB10
Program Type         D   Direct Input
Its not working for more than 1 line item.
For more than 1 line item its giving Error saying that
'102122                         V1                   845
Print parameter SAPML2 1 is not defined
Can anybody help me out in this regard.
Thanks in advance.
Nitin.

hello, friend.
i will still research the subject. but the first thing that comes into my mind is t-code VA05. with this, you have the option to change the Plant en masse. so a possible workaround is for you to list a number of sales orders using VA05. you then sort the line items by Plant. choose all items with the same plant, change the plant via mass change... then change back to the original plant. hopefully, the new settings should apply.
do test a few sales orders by doing this for a larger scope.
regards.

Songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?

I have Imatch and songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?

By "hard reset" you mean hold down the Home and power buttons until the iOS device restarts, correct?

PSE8 Backup/Synchronization not working for more than a month

1. Reconnecting files shows that a file is not connected; however, no file is listed. How do I find missing file's properties.
2. Backup/synchronization preferences works fine.
3. I can select one or more or the whole catalog.
4. The twirly icons show next to the album(s) for a second or show but then the synced icon remains in album/albums.
5. I click OK and after the hour glass shows a while, it finishes.
6. I click on icon and see that sychronization is on.
7. If I check (unsynced items, synced items, or items marked for sync) it shows nothing and says that none of those choices matches.
8. I have repaired and reindexed countless times (never has there been a "repair" problem.
9. I click on optimize and that works.
10. After that I notice "generating thumb nails" and the twirly thing moving. I've let it generate thumbnails for more than 24 hours and it's still going.
I have spent countles hours during day and night, and I can't get it to work.
I noticed that someone wrote that he had a similar problem that began with his using the IPAD. And I started using the IPAD also, but I couldn't sync my files with photoshop.com before that.
Customer service and Help provides me with no answers. What should I do?

Hi clairenanak:
Sorry to hear about the troubles.
On your #1, you may have disconnected files of media types that are not visible. To ensure that all media types are visible, go to View > Media Types, and check any items that are not currently checked. Then try the Reconnect.
As far as backup/sync not working, disconnected files can stop sync from working.
After resolving the disconnected files issue, let us know if sync is not working. We may need to look at the sync log to determine why.
As for the Organizer constantly generating thumbnails, this could indicated that you have many files, for example 10,000, in your catalog.
If you have many files in your catalog, then you may need to just wait for the process to finish.
It may also indicate a problem with the thumbnail cache that can't be repaired by the Optimize command.
You can manually reset this file by doing the following:
Determine the name of your Elements Organizer catalog.
The name of the catalog appears in the lower-left of the Organizer.
    Alternatively, you can open the Organizer and then click File > Catalog. The name of the catalog will show in the list at the bottom with " [current]" after it.
Close the Elements Organizer.
Navigate in Windows Explorer to the folder that contains your catalog. Here are the default locations:
   Windows 7 or Vista: C:\ProgramData\Adobe\Elements Organizer\Catalogs\<CATALOG NAME>
Click Start, type "%ProgramData%" (including the quotation marks) into the Start Search, and then press Enter.
Open each folder in the above structure until you have opened the catalog folder.
   Windows XP: C:\Documents and Settings\All Users\Application Data\Adobe\Elements Organizer\Catalogs\<CATALOG NAME>
Choose Start > Run, type "%AllUsersProfile%\Application Data" (including the quotation marks) in the Open text box, then press Enter or click OK.
Open each folder in the above structure until you have opened the catalog folder.
   NOTE: Replace <CATALOG NAME> with the name of the catalog that you determined in Step 1 above.
There should be a file called thumb.5.cache, which is the thumbnail cache. Delete this file.
The next time you open the Elements Organizer, the thumbnail cache will begin to rebuild. This may take some time, depending on the number of files you have in the catalog.
HTH

Connecting to the update has been connecting for more than 6 hourand is still trying to connect when will it finish downloading the suggested update?s, why? This update has slowed me down way too much.

A window opened when I started that said " We strongly suggest that you update......" I did not want to but each time I turned my computer on the same window pops up with the "strongly suggest" and my computer began to run slower and stop lot. So I finally pressed the bar for more information..But never got any. My computer continued to keep "stop script" and run slow. So after several days of this I clicked on "Next" to download the update and it has been" Connecting to the update server" for over 6 hours now and still running little green boxes in a frame over and over and over. Why is this happening?

Join the club Robert.
My huge annoyance is how Preview converts ai, .eps and .ps files to .pdf files.
It has progressively deteriorated from Tiger to Leopard to Snow Leopard.
In Leopard it defaulted to saving the .pdfs to the Documents folder not the place of origin and would regularly crash if more than a few (sometimes just 2) files were opened simultaneously.
In Snow Leopard nothing was fixed and now the names are stripped off the converted files so that they are all called Untitled.
Apple must have received hundreds of bug reports (I diligently sent one every time Preview crashed) and several feedbacks detailing the problem, to the point I believe persecuting Designers and ruining their work has become a NEXT programmers secret objective.
Except for a couple of minor bug fixes to do with drag & drop in Preview, I am puzzled where the so-called improvements in Snow Leopard really benefit user.
Peter

WRT54GX4 Router Will Not Connect to More Than One Computer at a Time Wireless

I have a WRT54GX4 and cannot connect wirelessly with more than one laptop at a time. Each laptop I have will connect if I disconnect the other one. I have upgraded to 1.00.20 firmware and tried to find a setting for the router to address the problem without success.

double check on the mac addresses that you have saved so that your wireless computers can connect properly to your netwok, or you could just disable the mac filtering so that all of your computers can easily connect, just secure your wireless network

E3200 - USB port does NOT work for more than one device

We needed a new router that had the dual band connectivity as our previous router stopped working properly when we started using a baby monitor operating on the same 2.4 GHz. The choice was between E3200 and E2500. We chose the E3200 mainly because it also offered a USB port. We were hoping to use that to connect our printer and two external drives (thus bypassing our old desktop that's been working as a server). However, it turns out that the USB port on E3200 does NOT support USB hubs! So, you can ONLY use ONE device - either a printer or one external storage drive. That wasn't really clear at all from the description. I feel like we wasted the extra $50 hoping to get functionality that just isn't there. Can't believe that in this day and age, Cisco thinks we all have only ONE USB device we might want to connect to the network! The router itself is fast enough, but the extra $50 for a USB port that doesn't do much and some speedboost phantom ability is just not worth it.

Just to save time to you all, after numerous attempts to install a USB hub to my E3200,
I wrote to Cisco Customer Service (live chat) and I specifically requested how to set up the usb hub or the virtual USB port and they said that they do not have a software to install a USB hub.
Hope this help
Massimo
(Mod note: Edited for guideline compliance.)

Macbook Pro Airport won't connect for more than a few seconds on battery

My Macbook Pro will not stay connected to my work Wifi lan running on cisco AP1213G. It connects for a few seconds then drops the connecion whenever it's on battery power. On mains power it connects after saying there was an error but will occasionally not pass any trafic
SSID is hidden, network uses WPA.
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x168C, 0x86)
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: 0.1.24
Current Wireless Network: lonschap01-lan
Wireless Channel: 5
Any ideas?
Rob
Macbook Pro Mac OS X (10.4.7) 2Gb Ram, 100Mb HD 2Gz Core Duo.

Certain settings, e.g. printer sharing, can prevent sleep. There are other possibilities as well. See this kbase article:
http://support.apple.com/kb/HT1776

Daily lot size not working for more than 5 days grouping

Dear All,
I want to create the procurement proposal for 6 days once. So I have created new lot size ZB by copying TB and maintained no of periods as 6.
Assigned the lot size in Material master. After MRP run, the procurement proposal created for every two weeks on Monday. It is not created as expected (6 days once). Is there any other settings needs to be maintained to achieve the requirement?. The same problem happening for the no of periods 7,8,9 also with daily lot size.
I don't want to use the planning calendar for this. Daily lot size is working only upto no of periods as 5.
Could you please someone explain the standard functionality of daily lot size with combination of no of periods?
Thanks in advance.
Regards,
Ganesh

Ganesh,
Check if your lot size is something similar to screenshot below. It is important that you have lot sizing procedure as 'Period lot size' and period as 'Daily lot size'
With the above lot size (number of period as 8 days) I can see expected results.
Regards,
Himanshu

CustomDatumExample.java does not work for more than 2 attributes

The CustomDatumExample.java only works
if the Employee object has 2 attributes -
(EmpName and EmpNo). If I try to add
another attribute to the Employee object I get java.lang.ArrayIndexOutOfBoundsException: 2 on the getAttr3 method.
Anyone know why?
Employee object
CREATE TYPE employee AS OBJECT
empname VARCHAR2(50),
empno INTEGER,
attr3 VARCHAR2(50)
Custom object class
public class Employee implements CustomDatum, CustomDatumFactory
public static final String SQLNAME = "EMPLOYEE";
public static final int SQLTYPECODE = OracleTypes.STRUCT;
MutableStruct _struct;
static int[] _sqlType =
12, 4
static CustomDatumFactory[] _factory = new CustomDatumFactory[3];
static final Employee _EmployeeFactory = new Employee();
public static CustomDatumFactory getFactory()
return _EmployeeFactory;
/* constructor */
public Employee()
struct = new MutableStruct(new Object[3], sqlType, _factory);
/* CustomDatum interface */
public Datum toDatum(OracleConnection c) throws SQLException
return struct.toDatum(c, SQL_NAME);
/* CustomDatumFactory interface */
public CustomDatum create(Datum d, int sqlType) throws SQLException
if (d == null) return null;
Employee o = new Employee();
o._struct = new MutableStruct((STRUCT) d, sqlType, factory);
return o;
/* accessor methods */
public String getEmpname() throws SQLException
{ return (String) _struct.getAttribute(0); }
public void setEmpname(String empname) throws SQLException
{ _struct.setAttribute(0, empname); }
public Integer getEmpno() throws SQLException
{ return (Integer) _struct.getAttribute(1); }
public void setEmpno(Integer empno) throws SQLException
{ _struct.setAttribute(1, empno); }
public String getAttr3() throws SQLException
{ return (String) _struct.getAttribute(2); }
public void setAttr3(String attr3) throws SQLException
{ _struct.setAttribute(2, attr3); }
null

Just to save time to you all, after numerous attempts to install a USB hub to my E3200,
I wrote to Cisco Customer Service (live chat) and I specifically requested how to set up the usb hub or the virtual USB port and they said that they do not have a software to install a USB hub.
Hope this help
Massimo
(Mod note: Edited for guideline compliance.)

Router won't stay connected for more than 45 minutes

I have a BEFW11S4 v. 4 (firmware 1.52.02) wireless router that I've been using for years. Recently (i.e., within the past week), it has been dropping its internet connection about every 45 minutes. The network set-up is: an XP desktop connecting via an access point (Linksys WUSB11 v. 2) and a Vista laptop connecting via its internal wireless card. I also have a Vonage-supplied Linksys router running VoIP (RT31P2) that's connected to the wireless router. The cable modem is a Scientific Atlanta DPC2100 series.
The routers/modem are on a bookshelf in the middle of a wall all by themselves. There is a DECT 6.0 cordless phone across the room (as far away as possible from the router).
When the router is connected, everything works with no problems whatsoever. Then, after about 45 minutes, the connection drops from everything. After unplugging the wireless router for about 30 seconds then plugging it back in, it's good to go for another 45 minutes. I've tried changing the wireless channel with no luck. I've also cycled the entire system (*several* times. ugh!) The SSID is not "linksys." My internet provider did recently change to Comcast, but the problems I've been having don't align with the change in providers.
Some quirks that I've noticed is that the Vista laptop can see the network, but can't connect, saying it received no response from the router when I run the "Diagnose the problem" function. The XP machine responds in a similar manner; it has my network on the list, but just hangs when it tries to connect. Also, sometimes the VoIP router is affected (i.e., the phone line disconnects), but other times it's not.
I'm extremely frustrated at this point, and ready to chuck everything out the window. Does anyone have any idea what could be causing this type of problem?

Well if you are able to go online directly with the modem...connect modem>>>>route>>>>pc....if its a cable modem then reset the router for 30 secs in such a way that power light is blinking on the router.Now, power cycle the complete power cycle...ie., unplug the power cable from the modem & from the router...now plug in the power cable to the modem once all the lights are solid green you could plug in the power cable to the router....& you would be online

SNAPSHOT : clause IN not working for more than 1 entry

Greetings,
I'm trying to use snapshots templates to confine a snapshot to a
particular set of data. My 'where' clause of my snapshot is
something like this:
(...) where attribute IN (:VALUES)
-When I define my template variable VALUES as "'value1'", it
returns ok only the records which attribute has the
value 'value1'. [OK]
-When I define my template variable VALUES
as "'value1','value2'", it doesn't return any record!! [WRONG!]
Is this a bug (or a not implemented feature) of oracle lite? Or
am I doing anything wrong?
If it is a bug, anyone has an idea of how can I turn around this
problem if I don't know what are the filter values that I'm
going to use (defined by each user) and how many they are?
thanks,
psalazar.

In our application we tend to use views to return appropriate values for a particular user.
For example (we do building inspections) the publication item sql is like
select * from inspection_sites where id in (select site_id from v_pda_bi_sites where bi_id=:bi_id)
The view acts like a dynamic parameter table (in this cases looks at experience level, status of sites, and responsibility allocations). Once the driving views are tuned this works quite efficiently, and as the dependant tables for the publication item automatically includes all of the tables in the driving view, the object gets refreshed if there is any change to any of them, even if the site details themselves have not changed

AEBS can't keep an internet connection for more than 1 day...why?

I continually have to reset my Ethernet cable on my cable modem to get connected to the internet.This is very frustrating. I had Apple send me a new unit and that still hasn't fixed the problem. The only thing that works is printer sharing.
Is anyone else experiencing the same problems?

According to Adobe...
http://www.adobe.com/products/creativecloud/faq.html
Do I need ongoing Internet access to use my Creative Cloud desktop applications?
No. Your Creative Cloud desktop applications (such as Photoshop and Illustrator) are installed directly on your computer, so you won't need an ongoing Internet connection to use them on a daily basis.
An Internet connection is required the first time you install and license your desktop apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
For annual members, you can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.
Seems like you would be ok, but I understand what you're saying, hopefully a Staff member will confirm.

HP LaserJet 1300 not connected for more than 1 day

Similar Messages

Maybe you are looking for