AET fields not created due to database limit
Hi Experts,
I am trying to create AET fields for BUT000 transaction table. But when i click on the 'Save and Generate' button for the AET field, i get a message 'Field enhancement for place INCL_EEW_BUT000 is not possible due to database limit'. Please help me understand how can i create the AET fields. Are any settings required to increase the database limit.
Ay pointers would be highly appreciated.
Regards,
Radhika
Hi Radhika,
Its a normal scenario when you have exceeded the no. of fields allowed to be added for a business transaction. The initial settings for AET settings is such that *a prefix 'ZA' is attached to each AET extension which gets created when create a field through AET*. Now since you have exceeded this limit, go to SPRO->CRM->UI Frame Work-> UI Frame Work Definition->AET->Define System Settings.
Here you can change the generation prefix from A to B. Now the system will allow you to add as many extra fields as you did for prefix 'ZA'. The only change you'll see is that the AET extension prefix will now be 'ZB' instead of 'ZA'.
When you have exceeded number of fields even for 'ZB' extension, you can change the prefix to 'C' to add further more fields.
Hope this helps.
Thanks
Vishal
Similar Messages
-
What's wrong with this MySQL connection? "Could not create connection to database server"
I'm able to connect to other MySQL databases but this one particular remote MySQL connection isn't working and I cannot figure it out. It probably has something to do with the remote server, not CF, but I thought I'd post it here if anyone had an idea. The MySQL account has full priviledges.
Here is the message when I try to validate the data source:
Connection verification failed for data source: test
com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server. Attempted reconnect 3 times. Giving up.
The root cause was that: com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server. Attempted reconnect 3 times. Giving up.This happened on two servers. One one, the cause was that skip-networking was turned on. In the other situation, it appears that the database name was case sensitive, so TEST was not the same as test. Even though I edited the data source in the CF administrator, it still didn't work (very misleading). When a coworker entered a new data source with the same information (uppercase database name this time from the start), it worked.
Has anyone else seen this problem with the case sensitive database names? And with the data source in CF not updating the case correctly? Seems like a bug in CF. -
Glom – Could not create the new database
I would like to try Glom, but always get the this error
"Glom could not create the new database. Maybe you do not have the necessary access rights. Please contact your system administrator."
This happens with both local and extern server configuration. Any ideas on how to fix this?
Regards,
RenkeIt would also help, if you install the application and just tell me, if you get the same error, when trying to create a database. Maybe it's just a problem on my side.
Regards,
Renke -
Database Initialiser does not create azure sql database
I have a WPF application In the OnStartup in the app.cs I set the Database initializer and forced the context the initialise my database:
Debug.WriteLine("Setting Initializer");
Database.SetInitializer<MyContext>(new MyDatabaseInitializer());
Debug.WriteLine("Declaring new context");
using (MyContext c = new MyContext("MyContext"))
Debug.WriteLine("Force the initialization");
c.Database.Initialize(true);
Debug.WriteLine("Done!");
I created a sql database in the management portal of the azure.
Copied the connectionstring it provided for ADO.net.
But my database is not created.
I also added a firewall rule but nothing happens. I Have no clue what to do.
Can anybody please help me with this?
If you need more information please ask i really have to get this sorted out.
Thanks in advance!Hi Turkstra,
I have tried to use EF to create Azure SQL database, it works as expect, the database 'jambordbcreate' appear in my SQL Azure, below is the detailed codes.
using System;
using System.Collections.Generic;
using System.Data.Entity;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace CodeFirst
class Program
static void Main(string[] args)
Database.SetInitializer(
new CreateDatabaseIfNotExists<SchContext>());
using (var db = new SchContext("Server=tcp:****.database.windows.net,1433;Database=jambordbcreate;User ID=vote@***;Password=***;Trusted_Connection=False;Encrypt=True;Connection Timeout=30"))
string name = "jambor";
var student=new Student(){Name=name, ID="1a"};
db.Students.Add(student);
db.SaveChanges();
db.Database.Initialize(true);
public class Student
public string ID { get; set; }
public string Name { get; set; }
public string age { get; set; }
public string sex { get; set; }
public class School
public string ID { get; set; }
public string Name { get; set; }
public virtual List<Student> Students { get; set; }
public class SchContext : DbContext
public SchContext(string connection):base(connection)
public DbSet<Student> Students { get; set; }
public DbSet<School> Schools { get; set; }
I suggest you check your SQL connection, after run your code, please refresh azure portal to see whether your database is exist. Hope this give you some help.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Could not create the TimesTen database and load it into memory for the first time
Hi all,
I am making tutorial from http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/timesten/tt1121/1_creating_imdbcache_win/1_creating_imdbcache_win.htm
I've got problem on step "Create the TimesTen Database and Configure It to be an In-Memory Cache Database" - step two.
after command:
ttisql myDatabaseDSN
I've got only:
connect "DSN=inmemoryDB";
The connection should be successful but it's not. What could be the problem of it ? I want to run it on my laptop with proccesor Intel 5 on Windows 7.
onPer your paste, this is the error:
9:28:30.65 Info: : 4412: 7208 0000000001EBFAD0: No such data store
19:28:30.65 Info: : 4412: daDbConnect failed
19:28:30.65 Info: : 4412: return 1 833 'no such data store!' arg1='c:\timesten\database\my_ttdb'
So it's trying to find or create a TimesTen checkpoint file with the prefix "my_ttdb" in the directory path c:\timesten\database. Does this directory path exist? Or alternatively have you unticked AutoCreate under the First Connection tab in the TimesTen ODBC Setup for this database? If you have unticked this, then TimesTen won't try to automatically create the database if it does not find any already existing checkpoint files, and will return an 833 error. -
Admin Tool can not create any new database or model [nqserror 46131]
Hi everyone!
I can not create anything new in each layer on the admin tool. It marks unknown error.
When I try to import metadata it send the message: [nqserror 46131] unresolved hostname, everything in online mode. I can modify everything offline, then replace the rpd and I can create reports in Answers. But I need to do all of these online mode.
Everything else works well (Answers, Dashboards, Publisher). The server name is correctly put in the instanceconfig.xml.
OBIEE Version: 11.1.1.6.0 (upgrade recently from 11.1.1.5). The scheduler does not start since migration.
Server OS: Red hat enterprise edition
Regards,
Edgar Tercero
Edited by: 958457 on 11-sep-2012 12:04
Edited by: 958457 on 11-sep-2012 14:13Thanks but it not solve my problem.
I detect no problem in my enviroment variables in the bi-init.sh
This is what my admin tool log says:
[OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 690] [nQSError: 43113] Message returned from OBIS. [[
[nQSError: 46131] Unresolved host name: vrnmobiee. Could not get details about the specified host]] -
BAPI_PO_CREATE1 - PO not created due to wrong account assignment
Hello,
I'm trying to use this BAPI for a PO that I can create with ME21n, so I'm asking you what can be wrong with my input data. Here are the facts:
A - Message returned: KI / 265: Cost Center 1000 / 1000 does not exist;
B - Account Assignment Category = 'K' (Cost Center);
C - G/L account exists and is valid for the PO date;
D - Cost center exists and is valid for the PO date;
Here's how I'm filling the POACCOUNT table (one item only)
PO_ITEM = 00010
SERIAL_NO = 01
CREAT_DATE = 20.10.2009
GL_ACCOUNT = 614000
COSTCENTER = 1000
CO_AREA = 1000
In the POACCOUNTX table I filled the appropriate fields
Please remind that the PO enters fine with ME21n.
Any clues?
Regards,
JoãHi,
do you get the same error Ki265 also in the online transaction ME21N?
Maybe you need to specify POACCOUNT-COSTCENTER with leading zeros; like
"0000001000".
Please check In your test data POHEADER-COMP_CODE and POHEADERX-COMP_CODE, these should be filled as well.
If you still have a problem with the BAPI creation, please create a SAP ticket and use the notes 375886 and 539978
to prive us with a test data to check in SE37.
Regards,
Edit -
MANDT field not getting considered in database view.
Hi,
I have created a database view with tables MARA, MAKT and MVKE. The joi conditions are as below:
MARA-MANDT = MVKE-MANDT
MARA-MATNR = MVKE-MATNR
MARA-MANDT = MAKT-MANDT
MARA-MATNR = MAKT-MATNR
However, the MANDT of the logon client is not considered and when I execute the view, same Material code M0001 appears twice as it exists in clients 110 and 120.
Where am I going wrong?
Kindly assist.
Thanks in advance.If you don't specify CLIENT SPECIFIED and if the table or view is client-dependent the current client should be used by the SQL interface
- Are you giving the full key of a single record : MATNR, VKORG, VTWEG, SPRAS ?
- Is MANDT in the view in first position ?
Regards,
Raymond -
Hello,
I'm working on a MM-SUS, later a PO confirmation we create an ASN and it is transferred to R/3. A shipping notification is created but without tansport id, weight, volume and so on data.
On we05 i can see DESADV-DELVRY01 idoc with the data on segment E1EDL24 so the problem is not in SUS.
Had someone the same problem???
Regards,Hello,
I'm working on a MM-SUS, later a PO confirmation we create an ASN and it is transferred to R/3. A shipping notification is created but without tansport id, weight, volume and so on data.
On we05 i can see DESADV-DELVRY01 idoc with the data on segment E1EDL24 so the problem is not in SUS.
Had someone the same problem???
Regards, -
Multiply fields not created yet
Hi,
in my attached example...I have a quantity and unit cost that need multiplied together to = the cost.
That cost should then be totaled for all the subrows and listed in the cost field of the header row.
I'm confused on how/where to add the multiplication script for the quantity and unit cost fields.
Any help is greatly appreciated!I have an updated file now where the first row added under header 1 multiplies quantity x unit cost, but it doesn't multiply it if you add a second row.
Any ideas...? -
Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created
Hi There,
As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
DCRServer is down or may not be completely up. Check if the DCRServer process is running.
And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
Thanks,Also Here is more info output:
C:\Program Files (x86)\CSCOpx>pdshow -brief
Process State Pid
Tomcat Program started - No mgt msgs received 1572
TomcatMonitor Running normally 2236
Apache Program started - No mgt msgs received 2436
DataPurge Administrator has shut down this server 0
DCRServer Failed to run 0
CMFOGSServer Administrator has shut down this server 0
EssentialsDM Administrator has shut down this server 0
ConfigMgmtServer Never started 0
ConfigUtilityService Never started 0
CTMJrmServer Administrator has shut down this server 0
ChangeAudit Never started 0
SyslogAnalyzer Program started - No mgt msgs received 2976
ICServer Running normally 5096
EnergyWise Never started 0
PMCOGSServer Administrator has shut down this server 0
IPMOGSServer Administrator has shut down this server 0
IPMProcess Never started 0
TISServer Program started - No mgt msgs received 2544
DFMOGSServer Program started - No mgt msgs received 876
InventoryCollector Running normally 3052
Interactor Program started - No mgt msgs received 5136
InventoryCollector1 Program started - No mgt msgs received 5144
Interactor1 Program started - No mgt msgs received 5308
PTMServer Program started - No mgt msgs received 5320
UPMProcess Never started 0
TISDiscoveryJobCreate Administrator has shut down this server 0
SyslogCollector Running normally 5340
Proxy Program started - No mgt msgs received 5348
PMServer Running normally 5360
NameServer Program started - No mgt msgs received 5680
NameServiceMonitor Running normally 5876
LicenseServer Program started - No mgt msgs received 5884
FHPurgeTask Never started 0
EventFramework Program started - No mgt msgs received 5892
EPMServer Program started - No mgt msgs received 5904
FHServer Administrator has shut down this server 0
NOSServer Program started - No mgt msgs received 5580
diskWatcher Running normally 5640
DFMMultiProcLogger Program started - No mgt msgs received 5864
DFMLogServer Program started - No mgt msgs received 4896
DFMCTMStartup Administrator has shut down this server 0
DfmBroker Running normally 6104
DfmServer Running normally 6416
DfmServer1 Running normally 6424
DCRDevicePoll Never started 0
CSRegistryServer Running normally 6432
CSDiscovery Never started 0
AdapterServer1 Program started - No mgt msgs received 6440
AdapterServer Program started - No mgt msgs received 6448
C:\Program Files (x86)\CSCOpx>pdshow DCRServer
Process= DCRServer
State = Failed to run
Pid = 0
RC = -3
Signo = 1073741821
Start = N/A
Stop = 07/02/2012 17:39:06
Core = Not applicable
Info = Application failed or was registered incorrectly.
C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
The Cisco Prime Daemon Manager service is stopping..........................................
The Cisco Prime Daemon Manager service was stopped successfully.
C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
ERROR: [StandardDbUpgrade] : Database cmf is not installed.
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
ERROR: There is no database available to change password.
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
'cmf' is not a valid data source for the product. -
When trying to create a new user profile service application on a new SharePoint install I get the following error:
"The specified database is not a valid synchronization database"
The installation then fails and does not create the third database.
I found some threads with similar problems but it involved upgrading an existing db. In this case we want to create a new one. Here is the relevant ULS log info:
Starting schema provisioning of SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
Provisioning the SP15_TEST_ENT_SyncDB database with the script at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\Template\SQL\SPS\drop_procs.sql.
Provisioning the SP15_TEST_ENT_SyncDB database with a script stream.
Ensuring that the SP15_TEST_ENT_SyncDB database exists . . .
The SP15_TEST_ENT_SyncDB database does not exist.
It will now be created.
Setting the AutoClose option to False on the database SP15_TEST_ENT_SyncDB.
Setting the ArithAbort option to True on the database SP15_TEST_ENT_SyncDB.
Setting the TruncLogOnChkpt option to True on the database SP15_TEST_ENT_SyncDB.
Starting schema evaluation of existing SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
Validate Database: validating sync database
Validate Database: validation failed: Error code -2
Application error when access /_admin/NewProfileServiceApplicationSettings.aspx, Error=The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Microsoft.SharePoint.Administration.SPDatabaseException: The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.Administration.SPDatabaseException:
The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
I Tried to create another one under a different name (databases also) and I get the same error.
The SharePoint instance has the march mandatory update installed. The sql instance we are using is an existing SQL cluster for other SharePoint poc's.
Has anybody seen this issue before?I had the same problem and could not figure out what was wrong for the longest time. I then had the idea to check in the model system database to see if there were any extra custom tables in that database. Any tables that are in the model database
are put into any new database when it is created. I had some custom tables in the model database so I deleted the custom tables in the model database and deleted the failed user profile service application and its databases and then tried to recreate
the user profile service application again and it worked with no errors -
SE14 Status-UPGRADE-Table does not exist in the database
Folks,
I have created a ztable with SPRAS and few Char fields and generated a table maintenance generator.In the Dev it is working fine but when I moved the TR to Q TR ended up with errrors "Generation of Programs and Screens".When I check in Q in SE11 I am able to see the table but with an error message "Table doesn't exist in the database".
SE14 Status for this table is getting shown as UPGRADE in Q.
Can anyone here throw some light on what exactly this status UPGRADE means and how it gets set in SE14.
In DEV,I had checked the DATABASE OBJECT>>CHECK>DISPLAY and RUNTIME OBJECT>>CHECK>>DISPLAY and it is showing Database object is consistent but where as the same in Q is showing "Table is not created in the Database".
K.Kiran.Hi.
Is Q system is newly copied? Also please check the transport order of the table creation request. Also check whether pwd of the DB user is locked?
Regards,
Vimal -
Database do not start due to error 445
Hi,
We have three databases on one HP-UX 11.31 server, the DB version is 10.2.0.4, we started facing slowness in all the databases, when I tried to connect to the server it was very slow, even the sqlplus was taking very long time, when checked the alert logs of all the databases, found the below error in each alert log file;
ksvcreate: Process(m000) creation failed
Sun Apr 10 12:56:56 2011
ksvcreate: Process(m000) creation failed
Sun Apr 10 12:59:00 2011The server resource utilization was fine with almost 15%CPU utilization, 55% Memory utilization.
I aborted the databases then tried to start them, the startup failed with the below error for all databases;
ORA-00445: background process "PMON" did not start after 120 seconds
The following is the alert log content for one database;
ksvcreate: Process(m000) creation failed
Sun Apr 10 13:09:17 2011
ksvcreate: Process(m000) creation failed
Sun Apr 10 13:24:29 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
WARNING: Could not create SMR
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =242
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Sun Apr 10 13:27:10 2011
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 2000
sga_max_size = 3221225472
__shared_pool_size = 1828716544
__large_pool_size = 16777216
__java_pool_size = 16777216
__streams_pool_size = 16777216
nls_date_format = dd-mm-yyyy
nls_calendar = Arabic Hijrah
filesystemio_options = NONE
disk_asynch_io = FALSE
sga_target = 3221225472
control_files = /oradb/oradata/centl/control01.ctl, /oradb/oradat
a/cent/control02.ctl, /oradb/oradata/cent/control03.ctl
db_block_size = 8192
__db_cache_size = 1325400064
db_writer_processes = 4
compatible = 10.2.0.3.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = /arch
db_recovery_file_dest_size= 32212254720
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=centlXDB)
smtp_out_server = 10.241.16.118:25
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/admin/cent/bdump
user_dump_dest = /u01/app/oracle/admin/centl/udump
max_dump_file_size = 1024
core_dump_dest = /u01/app/oracle/admin/cent/cdump
audit_file_dest = /u01/app/oracle/admin/cent/adump
db_name = cent
open_cursors = 2000
pga_aggregate_target = 1699741696
Sun Apr 10 13:31:50 2011
USER: terminating instance due to error 445
Instance terminated by USER, pid = 2089Content for the Trace file for one of the databases;
ORACLE_HOME = /u01/app/oracle/db
System name: HP-UX
Node name: db01
Release: B.11.31
Version: U
Machine: ia64
Instance name: cent
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 4667, image: oracle@db01
*** 2011-04-10 15:44:19.475
Dynamic strand is set to TRUE
Running with 2 shared and 242 private strand(s). Zero-copy redo is FALSE
*** 2011-04-10 15:50:40.280
Waited for process PMON to initialize for 60 seconds
*** 2011-04-10 15:50:40.280
Dumping diagnostic information for PMON:
OS pid = 4701
loadavg : 1.36 1.35 1.29
Swapinfo :
Avail = 15520.08Mb Used = 2490.52Mb
Swap free = 13029.57Mb Kernel rsvd = 1018.08Mb
Free Mem = 10161.05Mb
F S UID PID PPID C PRI NI ADDR SZ WCHAN S
TIME TTY TIME COMD
1401 S oracle 4701 1 0 154 20 e000000413447080 53772 e00000017cefa140 15
:49:39 ? 0:00 ora_pmon_cent
/bin/sh[2]: /opt/langtools/bin/gdb: not found.
*** 2011-04-10 15:50:40.372
*** 2011-04-10 15:50:50.470
Waited for process PMON to initialize for 111 seconds
*** 2011-04-10 15:51:31.180
Dumping diagnostic information for PMON:
OS pid = 4701
loadavg : 1.36 1.35 1.30
Swapinfo :
Avail = 15520.08Mb Used = 2490.52Mb
Swap free = 13029.57Mb Kernel rsvd = 1018.08Mb
Free Mem = 10160.98Mb
F S UID PID PPID C PRI NI ADDR SZ WCHAN S
TIME TTY TIME COMD
1401 S oracle 4701 1 0 154 20 e000000413447080 53772 e00000017cefa140 15
:49:39 ? 0:00 ora_pmon_cent
/bin/sh[2]: /opt/langtools/bin/gdb: not found.
*** 2011-04-10 15:51:31.250
Killing process (ospid 4701): (reason=x4 error=0)
... and the process is still alive after kill!
*** 2011-04-10 15:51:40.190
KSTDUMP: In-memory trace dump
TIME(usecs):SEQ# ORAPID SID EVENT OP DATA
========================================================================
kground PMON
2C463A42:000000F8 1999 0 10254 42 KSBS1P: timed out while waiting
2C463A48:000000F9 1999 0 10254 51 KSBS1P: out of loop: process did not sta
rt
KSTDUMP: End of in-memory trace dump
*** 2011-04-10 15:51:40.190All the databases has similar trace files, I rebooted the server and still none of the database is starting.
The Server resources utilization seems to be fine;
oracle$ iostat 3 3
device bps sps msps
disk3 93 6.9 1.0
disk5 17 2.4 1.0
disk17 0 0.1 1.0
disk3 21 4.3 1.0
disk5 20 4.0 1.0
disk17 0 0.3 1.0
disk3 0 0.0 1.0
disk5 0 0.0 1.0
disk17 0 0.0 1.0
oracle$ swapinfo -tan
Kb Kb Kb PCT START/ Kb
TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME
dev 24576000 0 24576000 0% 0 - 1 /dev/vg00/lvol2
reserve - 918204 -918204
memory 15892564 2550292 13342272 16%
total 40468564 3468496 37000068 9% - 0 -
System: hrdbdr01 Sun Apr 10 16:25:28 2011
Load averages: 1.61, 1.60, 1.55
237 processes: 182 sleeping, 55 running
Cpu states:
CPU LOAD USER NICE SYS IDLE BLOCK SWAIT INTR SSYS
0 1.61 27.7% 0.0% 71.3% 1.0% 0.0% 0.0% 0.0% 0.0%
1 1.59 32.0% 0.0% 67.0% 1.0% 0.0% 0.0% 0.0% 0.0%
2 1.61 13.0% 14.0% 71.0% 2.0% 0.0% 0.0% 0.0% 0.0%
3 1.60 10.0% 20.0% 69.0% 1.0% 0.0% 0.0% 0.0% 0.0%
avg 1.61 20.8% 8.9% 69.3% 1.0% 0.0% 0.0% 0.0% 0.0%
System Page Size: 4Kbytes
Memory: 974032K (512772K) real, 1317016K (704304K) virtual, 12491712K free Page
# 1/24
CPU TTY PID USERNAME PRI NI SIZE RES STATE TIME %WCPU %CPU COMMAND
3 ? 4249 root 255 39 20140K 1612K run 42:41 49.96 49.88 stm
2 ? 3360 root 255 39 20140K 1612K run 55:11 49.65 49.56 stm
0 ? 3040 root 240 20 20140K 1612K run 72:27 49.08 48.99 stm
1 ? 2419 root 241 20 20140K 1616K run 77:20 48.81 48.73 stm
1 ? 4850 root 168 20 20140K 1612K sleep 4:15 23.99 23.95 stm
2 ? 4583 root 168 20 20140K 1612K sleep 12:21 22.93 22.89 stmThanks for a quick reply!
No changes on the server side, but recently we changed the Windows DNS servers and this unix machine is connected to the domain.
the resolv.conf file contents are
oracle:/etc$ more resolv.conf
domain mc.ed
nameserver 10.141.11.1
nameserver 10.141.11.2But, we have two new DNS servers with 10.141.11.3 and 10.141.11.4.
I think changing the old DNS IPs with the new DNS IPs will resolve the issue. -
DBCA can not use ASM for database storage due to following reason: Could no
Hi
I've a recently installed RAC11gR2(11.2.0.3) on HP-UX
I installed Grid Infrastructure with grid user:
Node1: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
Node2: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
I installed the Oracle Server with oracle user:
Node1: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
Node2: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
All related Grid Infrastructure is functioning well in both nodes:
$ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE node03
ora.FRA.dg ora....up.type ONLINE ONLINE node03
ora....ER.lsnr ora....er.type ONLINE ONLINE node03
ora....N1.lsnr ora....er.type ONLINE ONLINE node04
ora.asm ora.asm.type ONLINE ONLINE node03
ora.cvu ora.cvu.type ONLINE ONLINE node04
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE node03
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE node03
ora.scan1.vip ora....ip.type ONLINE ONLINE node04
ora....SM1.asm application ONLINE ONLINE node03
ora....03.lsnr application ONLINE ONLINE node03
ora....d03.gsd application OFFLINE OFFLINE
ora....d03.ons application ONLINE ONLINE node03
ora....d03.vip ora....t1.type ONLINE ONLINE node03
ora....SM2.asm application ONLINE ONLINE node04
ora....04.lsnr application ONLINE ONLINE node04
ora....d04.gsd application OFFLINE OFFLINE
ora....d04.ons application ONLINE ONLINE node04
ora....d04.vip ora....t1.type ONLINE ONLINE node04
$
The ASM instance are running well in both nodes
Connected with oracle user, the listener has registered perfectly the ASM instance in each node:
$
$ lsnrctl status
LSNRCTL for HPUX: Version 11.2.0.3.0 - Production on 16-MAY-2012 15:41:06
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for HPUX: Version 11.2.0.3.0 - Production
Start Date 16-MAY-2012 15:24:19
Uptime 0 days 0 hr. 16 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/node03/listener/alert/log .xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.133)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.136)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
The command completed successfully
$
$
DATA & FRA disk group are created:
$
$ echo $ORACLE_SID
+ASM1
$
$ asmcmd
ASMCMD>
ASMCMD> ls -lt
State Type Rebal Name
MOUNTED EXTERN N DATA/
MOUNTED EXTERN N FRA/
ASMCMD>
ASMCMD>
The big issue is... that the DBCA can not see the diskgroups. When I choose ASM Storage it can not see them. It shows the chart in blank and if i try to write the disk group, so the following message appears: can not use ASM for database storage due to following reason: Could not connect to ASM due to following error: ORA-01034 ORACLE not available
What can be passing in this case... ?
Thanks in advanceThanks both
Really the problem initially was because of this:
[INS-06006] Passwordless SSH connectivity not set up between the following node(s): [node1, node2]. CVU may reports "PRVF-4007 : User equivalence check failed for user "user"" for same error
and I had to install node1 first and after node2 manually and perhaps for this the product was not well linked.
I resolved the problem establishing the keys with the wizard and after copying the following files from node1 to node2
/home/grid/.ssh -------> /home/grid/.ssh
authorized_keys
known_hosts
This is the procedure if you run the wizard at the node1.
The problem is that the wizard creates the keys incompletely...
Thanks
Maybe you are looking for
-
XML Publisher Report getting errored out
Hi, I have created a basci XML Publisher report. When I run the report I am getting the following error in concurrent program log. XDO Data Engine ver 1.0 Resp: 51553 Org ID : 996 Request ID: 5040983 All Parameters: p_po_number=11 Data Template Code:
-
How do I set up a hotmail e-mail account on my iphone?
How do I set up a hotmail e-mail account on my iphone?
-
HP 6910p laptop with Matshita ujda775 dvd drive and SIM Card slot
Hello everyone , I have an HP Compaq 6910p with Windows 7 ultimate 32bit installed, the laptop has Matshita ujda775 DVD Drive, After a search about its specifications I found on ehow - Matshita UJDA775 Specifications that it can write to CDs but whe
-
Can't play a track that I downloaded from iTunes.
I just downloaded an audiobook from iTunes. For some reason I'm not able to play the third track. It won't sync to my iPod either. The error that I get when I try to add it to my iPod is: "Track Name" was not copied to the iPod "Jack's iPod" because
-
I have been working on this for 6 hours over 2 days and have gotten nowhere so I am hoping someone here can point me in the right direction. I have a HPdv2000. My DVD stopped working. I replaced the DVD with a new one and still not working. The li