Af:query + reset not working

Hi,
I am using jdev 11g(Version 11.1.1.3.0) .
I created a view object for a table with query which has a where clause( the clause expects a date from the user).
then i dragged the All queriable attributes on the jspx page as query with table option.
it renders a search region with iinputext(case id) and input as date(calendar) and a table below it which is rendered as per the input.
Everything works normal, but when i click on the Reset button rendered in the search section, it does not clear the date field.
if i write soemthing in case id field, that is cleared on the reset but the value entered by clicking the calendar is not resetted.
Besides on reset, it does not clear the table as well. Well from what i have been reading i assume i will have to reset the table programmatically.
But i am not so sure how to approach this situation.
Will highly appreciate if i can get any suggestions or point me to appropriate links.
Thanks in advance
ash

Hi,
When i try to programmatically reset the table, it does reset it but the problem is after resetting if enter a search criteria and click on search again, nothing shows up.
If i do a search before clicking on reset, it works fine, but afer reset the search stops working??
Any idea why this could be happening?
Following is teh reset code which i am refereing
    if(QueryOperationEvent.Operation.RESET.equals(queryOperationEvent.getOperation())){
      AppModuleImpl am = this.getAm();
      ViewObject submittalVO = am.findViewObject("AcrSubmittallogView1");
       submittalVO.setNamedWhereClauseParam("bind_date", "");
       submittalVO.executeQuery();
       AdfFacesContext.getCurrentInstance().addPartialTarget(resId1);
    queryOperationEvent.getComponent().processUpdates(FacesContext.getCurrentInstance());
on the jspx page, have added the following code in af:query component
<af:query id="qryId1" headerText="Search" disclosed="true"
                              value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
                              model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
                              queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
                              *queryOperationListener="#{backingBeanScope.backing_SubmittalLog.resetListener}"*
                              binding="#{backingBeanScope.backing_SubmittalLog.q1}"
                              resultComponentId="::resId1"
                              saveQueryMode="hidden" />Thanks
ashvini

Similar Messages

Bex Query is not working in portal

Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENU

Hi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank

Temporary Table In SAP Query - Does not Work?

DECLARE @date DATE
DECLARE @delrows INT
DECLARE @delquan INT
DECLARE @a INT
DECLARE @recrows INT
DECLARE @recquan INT
SET @a=0
IF OBJECT_ID('tempdb..##tab) IS NOT NULL DROP TABLE ##tab
CREATE TABLE ##tab
[Date] date,
[Delivery Rows] varchar(40),
[Delivery Total Units] varchar(40),
[Receipts Rows] varchar(40),
[Receipts Total Units] varchar(40),
WHILE @a!=7
     BEGIN
     SET @date=DATEADD(day,-@a, getdate())
     SELECT @delrows=ISNULL(COUNT(DLN1.[LineNum]),0), @delquan=ISNULL(SUM(DLN1.[Quantity]),0)
     FROM ODLN
     INNER JOIN DLN1 ON ODLN.[DocEntry]=DLN1.[DocEntry]
     WHERE ODLN.[CreateDate] = @date
     SELECT @recrows=ISNULL(COUNT(PCH1.[LineNum]),0) , @recquan=ISNULL(SUM(PCH1.[Quantity]),0)
     FROM OPCH
     INNER JOIN PCH1 ON OPCH.[DocEntry]=PCH1.[DocEntry]
     WHERE OPCH.[DocDate]=@date
     SET @a=@a+1
          INSERT INTO ##tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
END
SELECT * FROM ##tab
{/code}
Can anyone explain why this query does not work in SAP? It works fine on SQL but gives me this message in SAP:
1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near ')'.
2). [Microsoft][SQL Server Native Client 10.0][SQL Server]Statement 'Service Contracts' (OCTR) (s) could not be prepared.
Edited by: Chris Candido on Feb 2, 2011 8:38 PM

Chris,
There are several areas in your code which needed changes.
1. On the field name for your temp table you had spaces.
2. The SAP table name ODLN, OPCH, PCH1 had to be fully referenced like
[dbo].[ODLN]
3. You really need not have ## in front of your temp table, it could just be #
The select at the end is actually what causes the most problem as for some reason from within SAP it does not produce the result. I would suggest you put the whole code into a Stored Procedure and call the SP from SAP. Corrected SQL below. If you remove the Select line at the end the query would work with in SAP, but keep it give give you an error. SP is the best option for this.
DECLARE @date DATE
DECLARE @delrows INT
DECLARE @delquan INT
DECLARE @a INT
DECLARE @recrows INT
DECLARE @recquan INT
SET @a=0
IF object_id('tempdb..#tab') IS NOT NULL
BEGIN
   DROP TABLE #tab
END
CREATE TABLE #tab
[Date] date,
DeliveryRows varchar(40),
DeliveryTotalUnits varchar(40),
ReceiptsRows varchar(40),
ReceiptsTotalUnits varchar(40),
WHILE @a!=7
BEGIN
SET @date=DATEADD(day,-@a, getdate())
SELECT @delrows=ISNULL(COUNT(DLN1.LineNum),0), @delquan=ISNULL(SUM(DLN1.Quantity),0)
FROM [dbo].[ODLN]
INNER JOIN DLN1 ON [dbo].[ODLN].DocEntry=DLN1.DocEntry
WHERE [dbo].[ODLN].CreateDate = @date
SELECT @recrows=ISNULL(COUNT([dbo].[PCH1].LineNum),0) , @recquan=ISNULL(SUM([dbo].[PCH1].Quantity),0)
FROM [dbo].[OPCH]
INNER JOIN [dbo].[PCH1] ON [dbo].[OPCH].DocEntry=[dbo].[PCH1].DocEntry
WHERE [dbo].[OPCH].DocDate=@date
SET @a=@a+1
INSERT INTO #tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
END
SELECT * FROM #tab
Suda Sampath

Query is not working correctly

Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5

user9522927 wrote:
Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5I couldn't see through the internet what happend when you ran said query. How about helping us out by showing us the evidence that it "is not working correctly".
"Here's a picture of my car sitting in the driveway. Why won't it start?"

Select query is not working in BDC Program

Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........

If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
    where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
    where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
    FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond

Why select query is not working?

CREATE OR REPLACE TYPE prod_type AS OBJECT (
pid INT,
pprice NUMBER,
MEMBER PROCEDURE display(pid IN NUMBER));
create table prod of prod_type (pid primary key);
CREATE OR REPLACE TYPE deal_type UNDER prod_type (
ctr NUMBER,
OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
insert into prod values(deal_type(101, 4, 1));
insert into prod values(deal_type(102, 5, 0));
------below given select query is NOT WORKING ---------
select ctr from prod p where p.pid=101;
Thanks,
-Nid

------below given select query is NOT WORKINGWondering how you inserted data ...
SQL> CREATE OR REPLACE TYPE prod_type AS OBJECT (
2 pid INT,
3 pprice NUMBER,
4 MEMBER PROCEDURE display(pid IN NUMBER));
5 /
Type created.
SQL>
SQL> create table prod of prod_type (pid primary key);
Table created.
SQL>
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
4 );
5 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
4/1      PLS-00103: Encountered the symbol ")" when expecting one of the
         following:
         , not pragma <an identifier>
         <a double-quoted delimited-identifier> final instantiable
         current order overriding static member constructor map
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER));
4 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
1/1      PLS-00590: attempting to create a subtype UNDER a FINAL type
SQL>You made an attempt to create a subtype UNDER a FINAL type - that the reason why can not work ...
Avoid deriving a subtype from this FINAL type.
HTH

Excel 2010 MS Query is not working

Hi, I am in the process of upgrading all my Excel 2003 spreadsheets to Excel 2010. I am running into problem with the MS Query. Spreadsheets have MS Query linking to MS database. However, when I open some of the spreadsheets, the MS Query
is not working ie. the blue circle keeps turning and then not responding. It is very weird that this MS Query is working fine with some spreadsheets but not couple and they are all linking to the same database except a small different in criteria. I
tried to re-create the Query in the spreadsheet in Excel 2010 by going to Data>From Other Sources>From Microsoft Query and select the database. Once I set up the criteria and click Return data, the Query gets stuck.
Please help! Any comments/suggestions will be appreciated.
Thanks

Hi,
There are many possible causes that can crash MSQuery in Excel 2010.
First, please make sure we have installed the latest Office 2010 and Windows patches.
Second, Please read the Blog, it explains one typical crash scenario.
=====
AppName: msqry32.exe AppVer: 14.0.4750.1000 ModName: msvcr90.dll
There are several possible resolution you can try to resolve the above crash:
1. When you launch MS Query, just disable the option "Validate queries before saving or returning data", this is the fifth box in the options menu.
The only problem is that if you have made any mistake in your query, you'll only be noticed when receiving the data in excel.
2. Repair all the keys into registry at the following place:
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
For example:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
"TraceFile"="C:\\DOCUME~1\\...USERNAME...\\IMPOST~1\\Temp\\SQL.LOG"
"TraceDll"="C:\\WINDOWS\\system32\\odbctrac.dll"
http://blogs.technet.com/b/asiasupp/archive/2011/11/07/msquery-randomly-crashed.aspx
=====
Third, start the Excel 2010 with
safe mode, it helps us confirm if some add-ins cause this issue.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
Office programs.

OBIEE 10g RPD Paswword Reset not working

I have gotten 2 10g RPDs, the password of which I do not know. I ma trying to change/ reset the password by making use of the technique wherein "AUTHENTICATION_TYPE = BYPASS_NQS;" is uncommented within the NQSConfig.ini file. It does not seem to be working. I have also changed the Default RPD name within the config file to the new RPD alongside ensuring there are no gaps/ spaces in the RPD name which are the common pitfalls.
The strange part is that it did work with another 10g RPD couple of weeks back but is not working with the two RPDs I got yesterday. I have just the client 10.1.3.4.2 installed so eliminates the possibility of the BI server being up and running.
Is there anything else that could be preventing/ hindering this?

Nope. Did not work. Message returned back is that the existing password does not match the RPD password.
I have pasted the NQSConfig.ini file from "OracleBI\server\Config" below, just in case I am overlooking something that you happen to spot that might be preventing the overwrite:
# NQSConfig.INI
# Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
# INI file parser rules are:
# If values are in literals, digits or _, they can be
# given as such. If values contain characters other than
# literals, digits or _, values must be given in quotes.
# Repository Section
# Repositories are defined as logical repository name - file name
# pairs. ODBC drivers use logical repository name defined in this
# section.
# All repositories must reside in OracleBI\server\Repository
# directory, where OracleBI is the directory in which the Oracle BI
# Server software is installed.
[ REPOSITORY ]
Star     =     tsbrit03_VisualBI.rpd, DEFAULT;
# Query Result Cache Section
[ CACHE ]
ENABLE     =     YES;
// A comma separated list of <directory maxSize> pair(s)
// e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
DATA_STORAGE_PATHS     =     "C:\OracleBIData\cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;
// Cluster-aware cache
// GLOBAL_CACHE_STORAGE_PATH = "<directory name>" SIZE;
// MAX_GLOBAL_CACHE_ENTRIES = 1000;
// CACHE_POLL_SECONDS = 300;
// CLUSTER_AWARE_CACHE_LOGGING = NO;
# General Section
# Contains general server default parameters, including localization
# and internationalization, temporary space and memory allocation,
# and other default parameters used to determine how data is returned
# from the server to a client.
[ GENERAL ]
// Localization/Internationalization parameters.
LOCALE     =     "English-usa";
SORT_ORDER_LOCALE     =     "English-usa";
SORT_TYPE = "binary";
// Case sensitivity should be set to match the remote
// target database.
CASE_SENSITIVE_CHARACTER_COMPARISON = OFF ;
// SQLServer65 sorts nulls first, whereas Oracle sorts
// nulls last. This ini file property should conform to
// that of the remote target database, if there is a
// single remote database. Otherwise, choose the order
// that matches the predominant database (i.e. on the
// basis of data volume, frequency of access, sort
// performance, network bandwidth).
NULL_VALUES_SORT_FIRST = OFF;
DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh:mi:ss" ;
DATE_DISPLAY_FORMAT = "yyyy/mm/dd" ;
TIME_DISPLAY_FORMAT = "hh:mi:ss" ;
// Temporary space, memory, and resource allocation
// parameters.
// You may use KB, MB for memory size.
WORK_DIRECTORY_PATHS     =     "C:\OracleBIData\tmp";
SORT_MEMORY_SIZE = 4 MB ;
SORT_BUFFER_INCREMENT_SIZE = 256 KB ;
VIRTUAL_TABLE_PAGE_SIZE = 128 KB ;
// Analytics Server will return all month and day names as three
// letter abbreviations (e.g., "Jan", "Feb", "Sat", "Sun").
// To use complete names, set the following values to YES.
USE_LONG_MONTH_NAMES = NO;
USE_LONG_DAY_NAMES = NO;
UPPERCASE_USERNAME_FOR_INITBLOCK = NO ; // default is no
// Aggregate Persistence defaults
// The prefix must be between 1 and 8 characters long
// and should not have any special characters ('_' is allowed).
AGGREGATE_PREFIX = "SA_" ;
# Security Section
# Legal value for DEFAULT_PRIVILEGES are:
# NONE READ
[ SECURITY ]
DEFAULT_PRIVILEGES = READ;
PROJECT_INACCESSIBLE_COLUMN_AS_NULL     =     NO;
MINIMUM_PASSWORD_LENGTH     =     0;
#IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; // default is no.
#SSL=NO;
#SSL_CERTIFICATE_FILE="servercert.pem";
#SSL_PRIVATE_KEY_FILE="serverkey.pem";
#SSL_PK_PASSPHRASE_FILE="serverpwd.txt";
#SSL_PK_PASSPHRASE_PROGRAM="sitepwd.exe";
#SSL_VERIFY_PEER=NO;
#SSL_CA_CERTIFICATE_DIR="CACertDIR";
#SSL_CA_CERTIFICATE_FILE="CACertFile";
#SSL_TRUSTED_PEER_DNS="";
#SSL_CERT_VERIFICATION_DEPTH=9;
#SSL_CIPHER_LIST="";
# There are 3 types of authentication. The default is NQS
# You can select only one of them
#----- 1 -----
#AUTHENTICATION_TYPE = NQS; // optional and default
#----- 2 -----
#AUTHENTICATION_TYPE = DATABASE;
# [ DATABASE ]
# DATABASE = "some_data_base";
#----- 3 -----
AUTHENTICATION_TYPE = BYPASS_NQS;
# Server Section
[ SERVER ]
SERVER_NAME = Oracle_BI_Server ;
READ_ONLY_MODE = NO;     // default is "NO". That is, repositories can be edited online.
MAX_SESSION_LIMIT = 2000 ;
MAX_REQUEST_PER_SESSION_LIMIT = 500 ;
SERVER_THREAD_RANGE = 40-100;
SERVER_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
DB_GATEWAY_THREAD_RANGE = 40-200;
DB_GATEWAY_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; // default is 8192
MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; // default is 1024
INIT_BLOCK_CACHE_ENTRIES = 20; // default is 20
CLIENT_MGMT_THREADS_MAX = 5; // default is 5
# The port number specified with RPC_SERVICE_OR_PORT will NOT be considered if
# a port number is specified in SERVER_HOSTNAME_OR_IP_ADDRESSES.
RPC_SERVICE_OR_PORT = 9703; // default is 9703
# If port is not specified with a host name or IP in the following option, the port
# number specified at RPC_SERVICE_OR_PORT will be considered.
# When port number is specified, it will override the one specified with
# RPC_SERVICE_OR_PORT.
SERVER_HOSTNAME_OR_IP_ADDRESSES = "ALLNICS"; # Example: "hostname" or "hostname":port
# or "IP1","IP2":port or
# "hostname":port,"IP":port2.
# Note: When this option is active,
# CLUSTER_PARTICIPANT should be set to NO.
ENABLE_DB_HINTS = YES; // default is yes
PREVENT_DIVIDE_BY_ZERO = YES;
CLUSTER_PARTICIPANT = NO; # If this is set to "YES", comment out
# SERVER_HOSTNAME_OR_IP_ADDRESSES. No specific NIC support
# for the cluster participant yet.
// Following required if CLUSTER_PARTICIPANT = YES
#REPOSITORY_PUBLISHING_DIRECTORY = "<dirname>";
#REQUIRE_PUBLISHING_DIRECTORY = YES; // Don't join cluster if directory not accessible
DISCONNECTED = NO;
AUTOMATIC_RESTART = YES;
# EVALUATE_SUPPORT_LEVEL:
# 1: evaluate is supported for users with manageRepositories permssion
# 2: evaluate is supported for any user.
# other: evaluate is not supported if the value is anything else.
EVALUATE_SUPPORT_LEVEL = 0;
# Dynamic Library Section
# The dynamic libraries specified in this section
# are categorized by the CLI they support.
[ DB_DYNAMIC_LIBRARY ]
ODBC200 = nqsdbgatewayodbc;
ODBC350 = nqsdbgatewayodbc35;
OCI7 = nqsdbgatewayoci7;
OCI8 = nqsdbgatewayoci8;
OCI8i = nqsdbgatewayoci8i;
OCI10g = nqsdbgatewayoci10g;
DB2CLI = nqsdbgatewaydb2cli;
DB2CLI35 = nqsdbgatewaydb2cli35;
NQSXML = nqsdbgatewayxml;
XMLA = nqsdbgatewayxmla;
ESSBASE = nqsdbgatewayessbasecapi;
# User Log Section
# The user log NQQuery.log is kept in the server\log directory. It logs
# activity about queries when enabled for a user. Entries can be
# viewed using a text editor or the nQLogViewer executable.
[ USER_LOG ]
USER_LOG_FILE_SIZE = 10 MB; // default size
CODE_PAGE = "UTF8"; // ANSI, UTF8, 1252, etc.
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = NO;
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "<Database>"."<Connection Pool>" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
# Query Optimization Flags
[ OPTIMIZATION_FLAGS ]
STRONG_DATETIME_TYPE_CHECKING = ON ;
# CubeViews Section
[ CUBE_VIEWS ]
DISTINCT_COUNT_SUPPORTED = NO ;
STATISTICAL_FUNCTIONS_SUPPORTED = NO ;
USE_SCHEMA_NAME = YES ;
USE_SCHEMA_NAME_FROM_RPD = YES ;
DEFAULT_SCHEMA_NAME = "ORACLE";
CUBE_VIEWS_SCHEMA_NAME = "ORACLE";
LOG_FAILURES = YES ;
LOG_SUCCESS = NO ;
LOG_FILE_NAME     =     "C:\OracleBI\server\Log\CubeViews.Log";
# MDX Member Name Cache Section
# Cache subsystem for mapping between unique name and caption of
# members for all SAP/BW cubes in the repository.
[ MDX_MEMBER_CACHE ]
// The entry to indicate if the feature is enabled or not, by default it is NO since this only applies to SAP/BW cubes
ENABLE = NO ;
// The path to the location where cache will be persisted, only applied to a single location,
// the number at the end indicates the capacity of the storage. When the feature is enabled,
// administrator needs to replace the "<full directory path>" with a valid path,
// e.g. DATA_STORAGE_PATH = "C:\OracleBI\server\Data\Temp\Cache" 500 MB ;
DATA_STORAGE_PATH     =     "C:\OracleBIData\cache" 500 MB;
// Maximum disk space allowed for each user;
MAX_SIZE_PER_USER = 100 MB ;
// Maximum number of members in a level will be able to be persisted to disk
MAX_MEMBER_PER_LEVEL = 1000 ;
// Maximum size for each individual cache entry size
MAX_CACHE_SIZE = 100 MB ;
# Oracle Dimension Export Section
[ ORA_DIM_EXPORT ]
USE_SCHEMA_NAME_FROM_RPD = YES ; # NO
DEFAULT_SCHEMA_NAME = "ORACLE";
ORA_DIM_SCHEMA_NAME = "ORACLE";
LOGGING = ON ; # OFF, DEBUG
LOG_FILE_NAME     =     "C:\OracleBI\server\Log\OraDimExp.Log";

Web Query (.iqy) not working in Excel after upgrade to 11.1.1.6

After upgrade 11.1.1.5 to 11.1.1.6, the Web Query (.iqy) does not work. After open the .iqy file in Excel, entered the user and password, it only pulls in "PK" in one cell, instead of the expected analysis report. This was working in 11.1.1.5 before upgrade.
Does anyone know how to correct this issue? Is this a bug in 11.1.1.6, or required some new configuration settings?
Thanks in advance.
DX

A bug has been registered.
Bug 14040587 - OBIEE 11.1.1.6: OPENING WEB QUERY (.IQY) FILE IN EXCEL SHOWS JUNK CHARACTERS.

Screen is frozen on apple logo and standard reset not working

All of a sudden the apple logo appeared on the screen of my 6th generation ipod classic and the standard process to reset will not work although I've attempted it numerous times. I also noticed that my ipod is not being recognized by either My Computer in Windows 7 or ITunes. I need help desperately!

So you can't the iPod to boot past the Apple logo? What happens if you try to manually force it into Disk Mode? Does that work? If so, you can try connecting it to your PC and iTunes in that mode to see if that will iTunes or your PC recognize it long enough for you to perform a restore operation.
Putting iPod into Disk Mode
B-rock

Using parameters in a select query sometimes not working

I use parameters throughout my code - usually without problem, but for some reason in one case it does not return a result. When I modify the querystring to contain the value instead of using parameters it works. Is it because I'm secting a clob? or is it because I'm using a 9i ODP.net dll against a 10g database? this is c# 2.0
here's the source code that does not work for me - REQUEST_DATA is a clob:
    public String loadRequest(String PSRNumber)
        String returnVal = null;
        ConnectionStringSettings connectionInfo = System.Configuration.ConfigurationManager.ConnectionStrings["Scribe"];
        OracleConnection myConnection = new OracleConnection();
        String strSQL = "select PSR, REQUEST_DATA from stats.request where PSR = :PSR";
        try
            myConnection.ConnectionString = connectionInfo.ConnectionString;
            OracleCommand cmd = new OracleCommand(strSQL, myConnection);
            cmd.CommandType = CommandType.Text;
            cmd.Parameters.Add("PSR", OracleDbType.Varchar2).Value = PSRNumber;
            myConnection.Open();
            OracleDataReader dr = cmd.ExecuteReader();
            if (dr.Read())
                returnVal = dr.GetOracleString(dr.GetOrdinal("REQUEST_DATA")).ToString();
            else
                returnVal = null;
            dr.Dispose();
            cmd.Dispose();
        catch (OracleException ex)
            printError(ex.Message);
        finally
            myConnection.Close();
            myConnection.Dispose();
        return returnVal;
    }when I replace the line generating the sql, and remove the lines pertaining to parameters it works:
String strSQL = String.Format("select PSR, REQUEST_DATA from stats.request where PSR = {0}", PSRNumber);
I'm fine just using this as a workaround, but I need an explanation why the other does not work - I prefer to use parameters.
Message was edited by:
user633546

I figured it out. thank you for your help in pointing me in the right direction.
the problem was there was a trailing space in the data.
when the data for that table is numeric for every record, the query allows me to leave out the single quotes. Trailing spaces do not seem to cause the database to see it as non-numeric - leaving out the quote still finds the record even if there is a trailing space.
but when I put in the quote, it is not an exact string match, so it could not find the record. sometimes this flexibility gets me into trouble :\

My select query in not working

hi
this my select query
select * from J_1IEXCHDR where werks = 'DT*'
this is not working
i want result where werks like DT01, DT09 and many statting with DT
so plz tel me how to write for like .
thank

Hi,
>
Guptaprashant wrote:
> hi
>
> this my select query
>
> select * from J_1IEXCHDR where werks = 'DT*'
>
>
> this is not working
>
> i want result where werks like DT01, DT09 and many statting with DT
> so plz tel me how to write for like .
>
> thank
Use:-
select * from J_1IEXCHDR where werks like 'DT%'.
Regards,
Tarun

Query Viewer not working

New install of CFB 2 on Win 7 32bit with CF901.
When right clicking on a database table in RDS Dataview I get an error , I get the error "/MyProject/.rdsTempFiles/RDS Query Viewer does not exist". The same is happening when trying to open the RDS Query Viewer.
This works correctly in CFB 1.
Any suggestions what is going on? Is it a permissions issue or something similar? The .rdsTempFiles directory is created in the /MyProject folder and shows up in the Navigator.
Thanks
Doug

Hi Kiran,
I cannot login to the Forums (the login is apparently down) so will answer what I have found.
Running CFB2 on Win 7 32bit. CFB 1 is also installed.
Tried the following: ( CFB 2 ALWAYS started with -clean option )
1. started with no projects at all in Nav. View.
     Added New Project called "test List" that was pointed to "C:\inetpub\wwwroot\testlist" folder - Query Viewer did not work
2. deleted project from Nav View, deleted .project, .settings., settings.xml, .rdsTempFiles from testlist folder.
     Added New Project called "test List2" that points to same testlist folder. Query Viewer did not work.
     Renamed "test List2" to "testlist". Query Viewer did not work.
3. Deleted project from Nav View, deleted .project, .settings, settings.xml, .rdsTempFIles from testlist folder.
     Restartd CFB2. Added New project called "testlist" that points to same testlist folder. QUERY Viewer worked successfully.)))
     Renamed testlist project to "Test List". Query Viewer worked.
Restarted CFB2 and repeated 1 and 2. Even re-started CFB2 after adding a new project before trying Query Viewer. Did not work.
Uninstalled CFB2. Reinstalled CFB2. Same results as 1,2,3.
Other interesting info.
In the Error Log when I start CFB2, I always get the following.
     Unable to create a template transfer. Com.adobe.rds.core
     Three more entries with No message except "No stack trace" - com.adobe.ide.coldfusion.server
This happens even after my reinstall.
Hope this helps.
Doug Smith
[email protected]

Characteristic "Master Data" setting in Query definition not working?

Hi,
I am having a problem with a query definition. (BI 7.0)
The query comprises the following definition which relate to displaying Milestone dates for respective projects in a time series so the dates are populated in the correct column in a time series:
Filter
Project Definition = Fixed Single Project Definition
Fiscal Year Variant = K4
Project Profit Centre = Hierarchy Node
Project Plant = Fixed Single Value
Free Chars
Network
Network Activity
Activity Element
Rows
Project Plant
Project Profit Centre (With hierarchy)
Project Definition
Milestone Type (Setting in characteristic to pick up Master Data)
CSR Relevant    (Setting in characteristic to pick up Master Data)
      Structure
           Actual
           Scheduled
    (Actual: Value type = Actual, Origin = Manual ,Event = Start)
    (Scheduled: Value type = Actual, Origin = Scheduled ,Event = Start)
Columns
Key Figure structure of 12 key figures in a time series
Selection
Key Figure = Date
Fiscal Year/Period = Current Fiscal Year / Period (SAP EXIT) (With Offset 1 to 12)
FYI
When I run the above it comes back correctly. However when I add "MILESTONE" (Characteristic setting (Posted Values) to the Query Definition immediately after the "Milestone Type" and before CSR it does not work it just is hanging for a considerable time.
I am not using "Master Data" for the "Access Type for Result Vales" for the additional characteristic "MILESTONE" just "Posted Values".
I was expecting that it would just show all Milestone types as per Master Data but just the Milestones that are posted for this result.
I would appreciate a solution to this issue and an explanation to why it hangs when I add the "MILESTONE" characteristic to the definition as explained above.
Thanks in advance..
Stevo

Hello there,
Putting Milestone in the rows in the query definition is not being hang there (i.e., while creating and saving the query) right?
It is stucked while executing the query isn't it so?
That's because you have too many records to be desaggregated by milestone characteristic, and this is indepently of posted values in the characteristic settings.
Putting milestone characteristic in the free characteristics will allow you to run the query, but desaggregate it (add it to the rows) will be to much information to read from your dataprovider (this is just a guess).
If it is being stucked in query execution whike milestone is in the rows. Try this for example:
Add milestone to the free chars. Execute the query. Filter milestone characteristic while still in the free rows and choose a value that you are pretty sure has the smallest records in the Dataprovider (could be for example value #). Than drill down milestone to the rows. You'll see that it can be executed without any problem.
Diogo.

Update Query is not working

Hi all,
Below update query throws error.
update S_ISS_OBJ_ATTR set DEFAULT_VAL in (
SELECT
T5.name
FROM
S_VOD_VER T1
INNER JOIN S_VOD T2 ON T1.VOD_ID = T2.ROW_ID
LEFT OUTER JOIN S_ISS_OBJ_DEF T3 ON T1.VOD_ID = T3.VOD_ID
LEFT OUTER JOIN S_VOD T4 ON T3.PAR_VOD_ID = T4.OBJECT_NUM
LEFT OUTER JOIN S_PROD_INT T5 ON T2.OBJECT_NUM = T5.CFG_MODEL_ID
LEFT OUTER JOIN S_ISS_OBJ_ATTR T6 ON T2.row_id = T6.vod_id
WHERE
(T5.name='3EH03253AA-[My Teamwork Office Edition'
or
T5.name ='3EH03255AA-[My Teamwork Office Edition'
or
T5.name='3EH03257AA-[My Teamwork Office Edition'
Error like "The use of the reserved word "IN" following "" is not valid. Expected tokens may include: "= ."."
Please help me to resolve above error.
Give me idea to update those records.
Edited by: user9522927 on Jul 20, 2010 2:41 AM

update S_ISS_OBJ_ATTR set DEFAULT_VAL in (
SELECT
T5.name
FROM
S_VOD_VER T1
INNER JOIN S_VOD T2 ON T1.VOD_ID = T2.ROW_ID
LEFT OUTER JOIN S_ISS_OBJ_DEF T3 ON T1.VOD_ID = T3.VOD_ID
LEFT OUTER JOIN S_VOD T4 ON T3.PAR_VOD_ID = T4.OBJECT_NUM
LEFT OUTER JOIN S_PROD_INT T5 ON T2.OBJECT_NUM = T5.CFG_MODEL_ID
LEFT OUTER JOIN S_ISS_OBJ_ATTR T6 ON T2.row_id = T6.vod_id
WHERE
(T5.name='3EH03253AA-[My Teamwork Office Edition'
or
T5.name ='3EH03255AA-[My Teamwork Office Edition'
or
T5.name='3EH03257AA-[My Teamwork Office Edition'
Error like "The use of the reserved word "IN" following "" is not valid. Expected tokens may include: "= ."."
Please help me to resolve above error.
The syntax is wrong.It should be: > update S_ISS_OBJ_ATTR set DEFAULT_VAL = (....)This will however set all values ( all rows) of that column to the same value. I don't know if that is your intention.Edit: Regaring the JOIN and the OR's the query will probably still not work, because the SELECt will most probably return more than one value HTH,FJFrankenMy Blog: http://managingoracle.blogspot.comEdited by: fjfranken on 20-jul-2010 2:42

Af:query + reset not working

Similar Messages

Maybe you are looking for