AFAB program strange performance in TEST mode

Hi colleagues,
We are experiencing a strange performance in AFAB program.
We have uploaded several assets in a particular company code. When executing AFAB transaction in TEST mode, the new assets are not considered, whereas, when performing a REAL execution yes they are.
We think that when reconciliating assets at the end of the year, this issue which is not harmful (but strange indeed) may be solved, but we are not sure at all.
Can anybody provide a clue on what is happening.
Thanks and my best regards

Hi When you run this report online in test it will only show +/- the first 1.000 assets and the new asset are later in the data base and you don't see them.
You have to run it in test mode in back ground and look in the spool to the result (default the spool shows arround 20 page's but this you can change or go to the next 20 pages)

Similar Messages

  • 1661 shows Test Mode on a dark screen?

    My 1661 got wet and now when I power it on the screen remains dark but with a barely visible "Test Mode" showing on it.
    Pressing keys does nothing.
    If I remove the battery and then replace it and press the power button, the Test Mode message reappears.
    Is there anything I can do or is this phone trashed?
    Thanks...

    Visit a Nokia Care center. Really strange that the test mode appeared there :/
    Normally test mode can be removed by removing the battery and re-inserting, but as you've tried it already. There seems to be something else wrong with the phone.
    Dry the phone completely under a light bulb or dump it into rice for a while. And try turning it on after it has fully dried.

  • AFAB program performance different if TEST switch activated

    Hi colleagues,
    We are experiencing a strange performance in AFAB program.
    We have uploaded several assets in a particular company code. When executing AFAB transaction in TEST mode, the new assets are not considered, whereas, when performing a REAL execution yes they are.
    We think that when reconciliating assets at the end of the year, this issue which is not harmful (but strange indeed) may be solved, but we are not sure at all.
    Can anybody provide a clue on what is happening.
    Thanks and my best regards
    Edited by: Patxi Albisu on Oct 28, 2008 11:10 AM
    Edited by: Patxi Albisu on Oct 28, 2008 11:11 AM

    michael483 wrote:
    Clearly I've touched a nerve.Not the one you think. I'm sure you're assuming we're a bunch of Java fanboys because we didn't jump on your bitch session band wagon. On the contrary, we see Java for what it is--a decent general purpose language that has is strengths and weaknesses and is suited for some jobs and not others. The temper tantrum tone of your post is annoying, regardless of the topic.
    HotSpot's optimizer is all-around crap and you all know it,No, I don't know that. What I do know is that I've seen Java code run much faster and more smoothly since the introduction of hotspot, and that it is sufficient for the tasks we've set it on the various projects where I've used it.
    and the best answer you can give is "don't use Java".Well, duh. If a tool doesn't suit the needs of the job at hand, you don't use it, and if you have no choice, then you do what you can to work around it the best you can. This is what professionals do.
    What did you expect as a response to your little hissy rant? Did you really think your post was a good way to try to solve whatever technical or business problem you're encountering?
    Fine, I won't.Wise choice. If nothing else, your blood pressure might come back down.

  • Performance issue: Calling a BAPI PO create in test mode to get error msgs

    Hi,
    We have an ALV report in which we display purchase orders that got created in SAP, but either got blocked due to not meeting PO Release strategy tolerances or have failed output messages. we are displaying the failed messages even.
    We are looping the internal table of eban(PR) & calling bapi po create in test mode to get failed messages.
    Now we are facing performance issue in production. What can be the alternate efficient way to get the error msgs with efficiency
    Regards,
    Ayub H.
    Moderator message: duplicate post (different ID, same company...), see below:
    Performance issue calling bapi po create in test mode to get error messages
    Edited by: Thomas Zloch on Mar 9, 2012

    Hi Suvarna,
    so you need to reduce the number of PO-simulations.
    - Likely you checked already, that all EBAN-entries should already be converted into POs. If there would be a large number of "new" EBAN-entries, they don't need to be simulated.
    - If it's a temporary problem: give aid to correct the problems (maintain prices or whatever the error-reasons are) Then the amount of not-converted purchase requisitions (PR) should drop, too
    - If it's likely, that your volume of open PR will stay high: create a Z-Table with key of EBAN and a counter, simulate (once a day) PO conversions and store the results in the Z-table. In your report you can use the results... if they are "new enough". From time to time new simulations should be done, missing master data might be available.
    Maybe users should be allowed to start this 2nd report manually (in background), too -> then they can update the messages after some data corrections themself, without waiting for the result (just check later in online report and do something different in between).
    And you might need to explain, PO simulation takes as long as PO creation... there is no easy or fast way around this.
    Best regards,
    Christian

  • Performance issue calling bapi po create in test mode to get error messages

    Hi,
    We have  a report which displays in alv the purchase orders that got created in SAP, but either got blocked due to not meeting PO Release Strategy tolerances or have failed output messages .We are displaying the failed messages too.
    We are looping the internal table of eban(purchase requisition) and calling bapi po create in test mode to get failed messages.
    Now we are facing performance issue in production.What can be the other effecient way to get the error messages without effecting performance.
    Regards,
    Suvarna

    Hi Suvarna,
    so you need to reduce the number of PO-simulations.
    - Likely you checked already, that all EBAN-entries should already be converted into POs. If there would be a large number of "new" EBAN-entries, they don't need to be simulated.
    - If it's a temporary problem: give aid to correct the problems (maintain prices or whatever the error-reasons are) Then the amount of not-converted purchase requisitions (PR) should drop, too
    - If it's likely, that your volume of open PR will stay high: create a Z-Table with key of EBAN and a counter, simulate (once a day) PO conversions and store the results in the Z-table. In your report you can use the results... if they are "new enough". From time to time new simulations should be done, missing master data might be available.
    Maybe users should be allowed to start this 2nd report manually (in background), too -> then they can update the messages after some data corrections themself, without waiting for the result (just check later in online report and do something different in between).
    And you might need to explain, PO simulation takes as long as PO creation... there is no easy or fast way around this.
    Best regards,
    Christian

  • Running a file in test mode

    hi iam doing a bdc recording in which there is an option to runthe file in test mode i.e if that button is checked then only will the validations will be done and the program should stop executingand save the succesful records at the end of it and should not post even if it doesnot contain ny error.and for the validations display a log file containing the no. of records and details.
    some of the validations are like komg-hland and country of origin of article komg-herkl has to be checked from T005 TABLE.
    The rate unit(currency or percentage)konp-konwa has to be checked from TCURC TABLE.THE CONDITION UNIT KONP-KMEIN HAS TO BE CHECKED FROM T006 TABLE.

    Hi Sushant,
    Just add a Check box in your program and check it by default.
    Perform all the validations expect inserting to the table if the chk param is checked. else insert the value.
    parameter : ip_tstrn as checkbox default 'X'.
      if ip_tstrn ne 'X'.
        perform create_data.
      endif.
    Guess i hav answerd ur q.Is this you have asked ?
    Rgds,
    Jothi.P
    *let me know the outcome.

  • Very strange performance issue

    Hi!
    I've got a very very strange performance problem and I have no more ideas what it might be:
    The following code fragment contains the useless line int count=0;
    However, deleting the line reduces(!) the execution speed of the program by ~30%. This is not only weird because the line is absolutely useless, but also because the whole function only takes <1% total execution time in the program.
        public void simuliere_bis_soll_erreicht()
            int count=0;  //????
            while(welt.soll_simulationszeit>welt.ist_simulationszeit && simu_active)
                simuliere_einen_schritt();
        }The problem occurs both under Java 1.5 and 1.4.2, using the HotSpot-Client.
    Cleaning and rebuilding the project does not help.
    It occurs on different computers in the same way, too.
    Thank you very much in advance! :-)
    Mirko Seithe

    well, this is what you get:
    1.) run totally interpreted since compilation threshhold is reached (1500 (client jvm) - 10000 (server-jvm)
    2.) start background compilation, run further in interpreted mode till compilation finishes (depends on code, but about 1000-10000)
    3.) run compiled code
    so this is what you get:
    ~20.000 invokations interpreted (about 70-90%n of total time)
    ~80.000 invokations compiled (30-10% of total time)
    maybe your int takes much longer to optimize, so the loop executes much longer in interpreted code.
    I would not bet on such microbenchmarks, since they do not tell you real stories under real circumstances. Believe me, I am the programmer working on performance optimizations in the company I am employed.
    lg Clemens

  • Field test mode signal display

    Hi all,
    Back in March I posted that I was having garbled and dropped calls. I still have them but my cell extender has helped some. I'm still waiting on the femtocell for a final fix in this area...
    Anyway a person here suggested that I make the field test call, tap on the bars to change it to the dBm display then quit using a soft reset to leave it in that mode.
    Did that and monitored signal in lots of places. I'd like to go back to the bars because in general, even though I understand dBm a picture is easier to quickly digest.
    So I did field test mode, tapped to get bars then quit again using soft reset. It seems though to go back to bars then at some point it switches back over to dBm again... A soft reset will take it back to bars but then at some point dBm will appear again...
    How do I get back to bar display permanently?

    I am sorry but, we do no have the steps to enable the Field Test Mode on your Iphone, which relates to the technical details and signal strength on the mobile phone and network. 
    To ensure you have the best signal on your phone and in your area, you may benefit from a free update of your wireless phone's roaming software once a month. As Verizon Wireless continues to expand our network, it is important to update your software to receive optimal coverage when traveling.
    To update your phone, please follow the simple instructions below while on the Verizon Wireless network and receiving a digital signal:
    1. Power on your Verizon Wireless phone.
    2. Dial *228 followed by the "Send" key.
    3. When prompted, press option "2" to update your roaming capabilities.
    Within two minutes, a voice recording will advise you that programming is complete. Remain on the line, as the call will disconnect automatically. I recommend you perform this update monthly or before leaving for a trip, as this will give you the ability to pick up newly acquired service areas while roaming.
    If you experience any difficulty with the free software upgrade, please call us at 800-922-0204 from a landline phone, and have your wireless phone charged and available when calling. 
    KinquanaH_VZW

  • Client copy error in test mode

    Dear all,
    I am doing a client copy in test mode. Following log is generated. Please tell me solution for it.
        Log File:               
    devdemo\sapmnt\trans\log\CC000007.RBD                                   
    Client copy from 25.08.2008 15:43:29
    System ID............................ RBD
    Target client........................ 120
    R/3 Release.......................... 700
    Basis Support Package...............SAPKB70012
    Host................................. devdemo
    Start in background............. .....
    User................................. SAP*
    Parameter
    Source destination......................PRD_300
    Source system.........................PRD
    Client in source system..............300
    Users in source system..............RBASIS
    Basis Support Package...............SAPKB70012
    Copier profile:.......................SAP_ALL
    Table selection
    Customizing data .....................X
    With application data................ X
    Initialize and recreate......... X
             / |   Change documents are not copied                                                                                |
    Test mode (without database update).. X
        3S3T  |   Start analysis of system 15:43:29                                                                                |
    /GC1/CC_EXIT_CLIENT_DELETION executed         0(        0) entries copied
    Exit program /GC1/CC_EXIT_CLIENT_DELETION successfully executed 15:43:44
    Table /SAPCND/CONDINDX is deleted, not copied
    Table /SAPCND/CONDREF is deleted, not copied
    Table /SAPCND/CONDRECS is deleted, not copied
    /SAPCND/CC_EXCLUDE_TABLES executed         3(        0) entries copied
    Exit program /SAPCND/CC_EXCLUDE_TABLES successfully executed 15:43:44
    Unknown message with
    /SAPCND/CC_GROUP_WS_AA executed         0(        0) entries copied
    Runtime              0 seconds
    Exit program /SAPCND/CC_GROUP_WS_AA successfully executed 15:43:45
    ADDR_CLIENTCOPY_SELECT_TABLES executed        26(        0) entries copied
    Runtime              1 seconds
    Exit program ADDR_CLIENTCOPY_SELECT_TABLES successfully executed 15:43:47
    EFG_FORM_CC_EXIT_BEFORE executed         0(        0) entries copied
    Runtime              0 seconds
    Exit program EFG_FORM_CC_EXIT_BEFORE successfully executed 15:43:48
    Start of deletion methods for client 120
    Start the deletion method for object FINB-TR-DERIVATION
    End of deletion method of object FINB-TR-DERIVATION
    Start the deletion method for object UCM003
    End of deletion method of object UCM003
    Start the deletion method for object /EACC/ARCHIVING
    End of deletion method of object /EACC/ARCHIVING
    Start the deletion method for object /EACC/JOURNALCC
    End of deletion method of object /EACC/JOURNALCC
    Start the deletion method for object /EACC/DERIVATION-1
    End of deletion method of object /EACC/DERIVATION-1
    Start the deletion method for object FINB-PERSIST
    End of deletion method of object FINB-PERSIST
    Start the deletion method for object FINB_GENERATOR
    Deletion log for client 120, application 10
    0 objects registered for deletion
    No errors found in simulation mode
    Deletion log for client 120, application EA
    0 objects registered for deletion
    No errors found in simulation mode
    Deletion log for client 120, application UG
    0 objects registered for deletion
    No errors found in simulation mode
    End of deletion method of object FINB_GENERATOR
    Start the deletion method for object FINB_SBU_DUMMY
    Buffer FINB_S_SBU_BUFFER_HASH_KEY, area AS deleted on server devdemo
    Buffer FINB_S_SBU_BUFFER_HASH_KEY, area AS deleted on server devdemo_RBD_00
    Buffer FINB_S_SBU_BUFFER_HASH_KEY, area XP deleted on server devdemo
    Buffer FINB_S_SBU_BUFFER_HASH_KEY, area XP deleted on server devdemo_RBD_00
    Buffer FINB_S_KF_CHARS_BUFFER_KEY, area HA deleted on server devdemo
    Buffer FINB_S_KF_CHARS_BUFFER_KEY, area HA deleted on server devdemo_RBD_00
    Buffer FINB_S_SBU_BUFFER_HASH_KEY, area GN deleted on server devdemo
    Buffer FINB_S_SBU_BUFFER_HASH_KEY, area GN deleted on server devdemo_RBD_00
    End of deletion method of object FINB_SBU_DUMMY
    FINB_TR_CC_EXIT executed         0(        0) entries copied
    Runtime              1 seconds
    Exit program FINB_TR_CC_EXIT successfully executed 15:43:50
    TPM_TRG_CCEXIT_REMOTE executed         0(        0) entries copied
    Runtime              0 seconds
    Exit program TPM_TRG_CCEXIT_REMOTE successfully executed 15:43:56
    CLIENTCOPY_SELECT_TEXTTAB executed         3(        0) entries copied
    Runtime              0 seconds
    Exit program CLIENTCOPY_SELECT_TEXTTAB successfully executed 15:43:56
    Table KX9RABA0000108 is deleted, not copied
    Table TABADRH is deleted, not copied
    Table TABADRS is deleted, not copied
    Table TABADRSF is deleted, not copied
    Table TABADRST is deleted, not copied
    Table UCF001C is deleted, not copied
    Table UCF001G is deleted, not copied
    Table UCF001T is deleted, not copied
    Table UCF0020 is deleted, not copied
    Table UCF0021 is deleted, not copied
    Table UCF0022 is deleted, not copied
    Table UCF0023 is deleted, not copied
    Table UCF002C is deleted, not copied
    Table UCF002T is deleted, not copied
    Table UCF0032 is deleted, not copied
    Table UCF003C is deleted, not copied
    Table UCF003G is deleted, not copied
    Table UCF003T is deleted, not copied
    Table UCF0040 is deleted, not copied
    Table UCF0041 is deleted, not copied
    Table UCF0042 is deleted, not copied
    Table UCF0043 is deleted, not copied
    Table UCF004C is deleted, not copied
    Table UCF004T is deleted, not copied
    Table UCF1000 is deleted, not copied
    Table UCF1001 is deleted, not copied
    Table UCF1002 is deleted, not copied
    Table UCF2300 is deleted, not copied
    Table UCF2301 is deleted, not copied
    Table UCF2310 is deleted, not copied
    Table UCF2311 is deleted, not copied
    Table UCF3000 is deleted, not copied
    Table UCF3001 is deleted, not copied
    Table UCF3010 is deleted, not copied
    Table UCF4000 is deleted, not copied
    Table UCF4001 is deleted, not copied
    Table UCF4002 is deleted, not copied
    Table UCF5000 is deleted, not copied
    Table UCF5001 is deleted, not copied
    Table UCF5002 is deleted, not copied
    Table UCF5010 is deleted, not copied
    Table UCF600C is deleted, not copied
    Table UCF6010 is deleted, not copied
    Table UCF6020 is deleted, not copied
    Table UCF6030 is deleted, not copied
    Table UCF6050 is deleted, not copied
    Table UCF6100 is deleted, not copied
    Table UCF6110 is deleted, not copied
    Table UCF6120 is deleted, not copied
    Table UCF6130 is deleted, not copied
    Table UCF6140 is deleted, not copied
    Table UCF6150 is deleted, not copied
    Table UCF6160 is deleted, not copied
    Table UCF6170 is deleted, not copied
    Table UCF6180 is deleted, not copied
    Table UCF6200 is deleted, not copied
    Table UCF620C is deleted, not copied
    Table UCF620T is deleted, not copied
    Table UCF6210 is deleted, not copied
    Table UCF6300 is deleted, not copied
    Table UCF6310 is deleted, not copied
    Table UCF7100 is deleted, not copied
    Table UCF7101 is deleted, not copied
    Table UCF7102 is deleted, not copied
    Table UCF7110 is deleted, not copied
    Table UCF7300 is deleted, not copied
    Table UCF7400 is deleted, not copied
    Table UCF7410 is deleted, not copied
    Table UCF7500 is deleted, not copied
    Table UCF900C is deleted, not copied
    Table UCF9010 is deleted, not copied
    Table UCFE01T is deleted, not copied
    Table UCFE020 is deleted, not copied
    Table UCFE02T is deleted, not copied
    Table UCFE03G is deleted, not copied
    Table UCFE03T is deleted, not copied
    Table UCFE04G is deleted, not copied
    Table UCFE04T is deleted, not copied
    Table UCFE050 is deleted, not copied
    Table UCFE05G is deleted, not copied
    Table UCFE05T is deleted, not copied
    Table UCFE060 is deleted, not copied
    Table UCFE06G is deleted, not copied
    Table UCFE06T is deleted, not copied
    Table UCFE070 is deleted, not copied
    Table UCFE080 is deleted, not copied
    Table UCFE081 is deleted, not copied
    Table UCFI00C is deleted, not copied
    Table UCFI10T is deleted, not copied
    Table UCFI200 is deleted, not copied
    Table UCFI210 is deleted, not copied
    Table UCFT000 is deleted, not copied
    Table UCFT001 is deleted, not copied
    Table UCFT002 is deleted, not copied
    Table UCFV000 is deleted, not copied
    Table UCFV200 is deleted, not copied
    Table UCFV201 is deleted, not copied
    Table UCFV202 is deleted, not copied
    Table UCFV20G is deleted, not copied
    Table UCFV21G is deleted, not copied
    Table UCFV21T is deleted, not copied
    Table UCFV220 is deleted, not copied
    Table UCFV22T is deleted, not copied
    Table UCI1101 is deleted, not copied
    Table UCI1201 is deleted, not copied
    Table UCI2100 is deleted, not copied
    Table UCL2011 is deleted, not copied
    Table UCL201G is deleted, not copied
    Table UCL201T is deleted, not copied
    Table UCM0010 is deleted, not copied
    Table UCM0011 is deleted, not copied
    Table UCM0012 is deleted, not copied
    Table UCM0013 is deleted, not copied
    Table UCM0014 is deleted, not copied
    Table UCM0015 is deleted, not copied
    Table UCM0016 is deleted, not copied
    Table UCM001T is deleted, not copied
    Table UCM002C is deleted, not copied
    Table UCM002T is deleted, not copied
    Table UCM0030 is deleted, not copied
    Table UCM0031 is deleted, not copied
    Table UCM0032 is deleted, not copied
    Table UCM0033 is deleted, not copied
    Table UCM003C is deleted, not copied
    Table UCM003T is deleted, not copied
    Table UCM1000 is deleted, not copied
    Table UCM1001 is deleted, not copied
    Table UCM100G is deleted, not copied
    Table UCM100T is deleted, not copied
    Table UCM600C is deleted, not copied
    Table UCM600T is deleted, not copied
    Table UCMA100 is deleted, not copied
    Table UCMA101 is deleted, not copied
    Table UCMA10C is deleted, not copied
    Table UCMA10T is deleted, not copied
    Table UCMI100 is deleted, not copied
    Table UCMI10C is deleted, not copied
    Table UCMI10T is deleted, not copied
    Table UCMI200 is deleted, not copied
    Table UCMI210 is deleted, not copied
    Table UCMI220 is deleted, not copied
    Table UCMT010 is deleted, not copied
    Table UCMT01C is deleted, not copied
    Table UCMT01T is deleted, not copied
    Table UCMT100 is deleted, not copied
    Table UCMT10C is deleted, not copied
    Table UCMT10T is deleted, not copied
    Table UCMV01T is deleted, not copied
    Table UCRX01C is deleted, not copied
    Table UCRX02G is deleted, not copied
    Table UCS0100 is deleted, not copied
    Table UCS0102 is deleted, not copied
    Table UCS0103 is deleted, not copied
    Table UCS0104 is deleted, not copied
    Table UCS0105 is deleted, not copied
    Table UCS0106 is deleted, not copied
    Table UCS0107 is deleted, not copied
    Table UCS0108 is deleted, not copied
    Table UCS010T is deleted, not copied
    Table UCS0110 is deleted, not copied
    Table UCS01A0 is deleted, not copied
    Table UCS01A1 is deleted, not copied
    Table UCS01A2 is deleted, not copied
    Table UCS01A3 is deleted, not copied
    Table UCS020T is deleted, not copied
    Table UCT100G is deleted, not copied
    Table UCT100T is deleted, not copied
    Table UCT101C is deleted, not copied
    Table UCT101T is deleted, not copied
    Table UCT2001 is deleted, not copied
    Table UCT200G is deleted, not copied
    Table UCT200T is deleted, not copied
    Table UCT2010 is deleted, not copied
    Table UCT2011 is deleted, not copied
    Table UCT2012 is deleted, not copied
    Table UCT2013 is deleted, not copied
    Table UCT2014 is deleted, not copied
    Table UCT2015 is deleted, not copied
    Table UCT2016 is deleted, not copied
    Table UCT3000 is deleted, not copied
    Table UCT300G is deleted, not copied
    Table UCT4000 is deleted, not copied
    Table UCT400G is deleted, not copied
    Table UCT8000 is deleted, not copied
    Table UCT800G is deleted, not copied
    Table UCT8010 is deleted, not copied
    Table UCT8011 is deleted, not copied
    Table UCT8012 is deleted, not copied
    Table UCT8013 is deleted, not copied
    Table UCT8014 is deleted, not copied
    Table UCT8015 is deleted, not copied
    Table UCT8016 is deleted, not copied
    Table UCT801G is deleted, not copied
    Table UCT801T is deleted, not copied
    Table /ISDFPS/CS_EXLST is convertible to the RFC system, field missing locally
    Table /ISDFPS/CS_EXLST is deleted, not copied
    Table AD01DLI is convertible to the RFC system, field missing locally
    Table AD01DLI is deleted, not copied
    Table ADRC is convertible to the RFC system, field missing locally
    Table ADRC is deleted, not copied
    Table AFFW is convertible to the RFC system, field missing locally
    Table AFFW is deleted, not copied
    Table AFIH is convertible to the RFC system, field missing locally
    Table AFIH is deleted, not copied
    Table AFKO is convertible to the RFC system, field missing locally
    Table AFKO is deleted, not copied
    Table AFPO is convertible to the RFC system, field missing locally
    Table AFPO is deleted, not copied
    Table AFRU is convertible to the RFC system, field missing locally
    Table AFRU is deleted, not copied
    Table AFRV is convertible to the RFC system, field missing locally
    Table AFRV is deleted, not copied
    Table AFVC is convertible to the RFC system, field missing locally
    Table AFVC is deleted, not copied
    Table ASMD is convertible to the RFC system, field missing locally
    Table ASMD is deleted, not copied
    Table AUFK is convertible to the RFC system, field missing locally
    Table AUFK is deleted, not copied
    Table AUFM is convertible to the RFC system, field missing locally
    Table AUFM is deleted, not copied
    Table CEZP is convertible to the RFC system, field missing locally
    Table CEZP is deleted, not copied
    Table CHVW is convertible to the RFC system, field missing locally
    Table CHVW is deleted, not copied
    Table CHVW_INC is convertible to the RFC system, field missing locally
    Table CHVW_INC is deleted, not copied
    Table CKIS is convertible to the RFC system, field missing locally
    Table CKIS is deleted, not copied
    Table CPZP is convertible to the RFC system, field missing locally
    Table CPZP is deleted, not copied
    Table CRFH is convertible to the RFC system, field missing locally
    Table CRFH is deleted, not copied
    Table EBAN is convertible to the RFC system, field missing locally
    Table EBAN is deleted, not copied
    Table EKBE is convertible to the RFC system, field missing locally
    Table EKBE is deleted, not copied
    Table EKBEH is convertible to the RFC system, field missing locally
    Table EKBEH is deleted, not copied
    Table EKEK is convertible to the RFC system, field missing locally
    Table EKEK is deleted, not copied
    Table EKES is convertible to the RFC system, field missing locally
    Table EKES is deleted, not copied
    Table EKET is convertible to the RFC system, field missing locally
    Table EKET is deleted, not copied
    Table EKKO is convertible to the RFC system, field missing locally
    Table EKKO is deleted, not copied
    Table EKPO is convertible to the RFC system, field missing locally
    Table EKPO is deleted, not copied
    Table EKRS is convertible to the RFC system, field missing locally
    Table EKRS is deleted, not copied
    Table EQBS is convertible to the RFC system, field missing locally
    Table EQBS is deleted, not copied
    Table EQUI is convertible to the RFC system, field missing locally
    Table EQUI is deleted, not copied
    Table EQUZ is convertible to the RFC system, field m

    Well.. those don't look like errors to me... depending on what copy profile you use SAP chooses what tables to copy and what tables to delete... so basically is just letting you know which tables are not to be copied across...
    Read
    http://help.sap.com/saphelp_nw04s/helpdata/en/99/0a2a8e7e2511d2a6250000e82deaaa/content.htm
    Regards
    Juan

  • St03 identify a transaction performed in debug mode

    Dear All,  on a SAP ECC 6.0 would it be possible to identify in the statistical data using transaction st03 if any transaction was performed in debug mode? for example using the  "/ h" mode.
    thanks for all
    Edited by: massimo perrella on Jan 21, 2010 2:54 PM
    Edited by: massimo perrella on Jan 21, 2010 2:59 PM

    Hi,
    Whenever you execute any activity in the process tree, you will find that activity log (protocol log) will be generated in front of the activity.
    Click on the logs , on the subsequent screen you will find the name of the program (in the header) related to that particular activity.
    Thanks
    Isha

  • Run in test mode call transaction

    I have written a bdc program using call transaction method. I am giving the option in the
    selection screen like run in test mode.so i want to display the error mess
    without actually updating the tables,
    if there is a way to do this
    please tell me how to run in test mode.
    thank you so much for all the replies.

    have written a bdc program using call transaction method. I am giving the option in the
    selection screen like run in test mode.so i want to display the error mess
    without actually updating the tables,
    if there is a way to do this
    please tell me how to run in test mode.
    thank you so much for all the replies.
    Hi
    it is not possible, once u run call tranation the data is updated in table.
    for ur requirement, put the option in test mode in selection screen, in this mode flat file data check with master data (flat file validations
    ) , if any errors it disaly errors in a report.
    i provide some code, this is for fb60 check this code
          FORM validate                                                 *
    FORM validate.
      delete t_record index 1.
      loop at t_record.
        delete t_record where accnt = ' '.
        translate t_record-bukrs to upper case.
        translate t_record-accnt to upper case.
        translate t_record-waers to upper case.
        translate t_record-xblnr to upper case.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
                  INPUT  = t_record-accnt
             IMPORTING
                  OUTPUT = t_record-accnt.
        move-corresponding t_record to n_record.
        append n_record.
        clear n_record.
      endloop.
      loop at t_record.
        clear flag.
        delete t_record where accnt = ' '.
    vendor  and company code checking.
        translate t_record-accnt to upper case.
        translate t_record-bukrs to upper case.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
                  INPUT  = t_record-accnt
             IMPORTING
                  OUTPUT = t_record-accnt.
        select single * from lfb1 where bukrs = t_record-bukrs
                                      and  lifnr = t_record-accnt.
        if sy-subrc <> 0.
          flag = 'X'.
          error_record-rowno = sy-tabix + 1.
          move-corresponding t_record to error_record.
          error_record-text1 = 'The Vendor not Under this company Code'.
        endif.
    With holding liability.
        select single * from lfbw where bukrs = t_record-bukrs
                                        and  lifnr = t_record-accnt
                                      and  WT_SUBJCT = 'X'.
        if sy-subrc <> 0.
          flag = 'X'.
          error_record-rowno = sy-tabix + 1.
          move-corresponding t_record to error_record.
    error_record-text2 = 'The Vendor doesnt have Withholding Tax Liability'.
        endif.
    G/L account check with company code*
        select single * from skb1 where bukrs = t_record-bukrs
                                      and saknr = t_record-hkont.
        if sy-subrc <> 0.
          flag = 'X'.
          error_record-rowno = sy-tabix + 1.
          move-corresponding t_record to error_record.
        error_record-text3 = 'The G/L acc not under the given company code'.
        endif.
    *cost centre checking
    this FM for leading zeros
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
                  INPUT  = t_record-kostl
             IMPORTING
                  OUTPUT = v_kostl.
    select single kostl from csks into v_kostl where bukrs = t_record-bukrs
                                             and kostl = v_kostl.
        if sy-subrc <> 0.
          flag = 'X'.
          error_record-rowno = sy-tabix + 1.
          move-corresponding t_record to error_record.
    error_record-text4 = 'The costcentre not under the given company code'.
        endif.
    it check the invioce alredy posted or not.
        translate t_record-waers to upper case.
        translate t_record-xblnr to upper case.
    select single belnr into v_belnr1 from bsip where bukrs = t_record-bukrs
                                              and   lifnr  = t_record-accnt
                                              and   waers  = t_record-waers
                                                  and   bldat  = p_invdat
                                              and   xblnr  = t_record-xblnr.
        if sy-subrc = 0.
          day   =  p_invdat+6(2).
          month =  p_invdat+4(2).
          year  =  p_invdat+0(4).
          concatenate day month year into date1 SEPARATED BY '.'.
          error_record-rowno = sy-tabix + 1.
          move-corresponding t_record to error_record.
    concatenate 'This document under number' v_belnr1 'already posted on '
          date1 into fld2  separated by space.
          error_record-text5 = fld2.
          flag = 'X'.
        endif.
    *zero balance
        on change of t_record-accnt or t_record-xblnr.
          amount = 0.
          totalamount = 0.
          amount = t_record-wrbtr1.
          loop at n_record where bukrs = t_record-bukrs
                               and  accnt = t_record-accnt
                               and xblnr = t_record-xblnr
                               and wrbtr1 = t_record-wrbtr1
                               and waers = t_record-waers.
            totalamount = totalamount  + n_record-wrbtr2.
          endloop.
        endon.
        if amount ne totalamount.
          error_record-rowno = sy-tabix + 1.
          move-corresponding t_record to error_record.
          error_record-text6 = 'Posting only possible with zero balance'.
          flag = 'X'.
        endif.
        if flag = 'X'.
          error_record-flag = 'X'.
          append error_record.
        endif.
        if flag <> 'X'.
          move-corresponding t_record to f_record.
          append f_record.
        endif.
        clear f_record.
        clear error_record.
      endloop.
    endform.
    *&  Form  Table Control
    FORM head_item .
      clear t_record.
      LOOP AT t_record.
        delete t_record where accnt = ' '.
        translate t_record-bukrs to upper case.
        translate t_record-accnt to upper case.
        translate t_record-waers to upper case.
        translate t_record-xblnr to upper case.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
                  INPUT  = t_record-accnt
             IMPORTING
                  OUTPUT = t_record-accnt.
        on change of t_record-accnt or t_record-xblnr or t_record-wrbtr1.
          MOVE-CORRESPONDING t_record TO t_head.
          APPEND t_head.
        endon.
        MOVE-CORRESPONDING t_record TO t_item.
        APPEND t_item.
        clear : t_item,t_head.
      ENDLOOP.
    ENDFORM.
    form disperrortestrun.
      loop at error_record.
        format color 2 intensified on.
        set left scroll-boundary column 70.
        write :   /'|',
                 (6) error_record-rowno,         '|' no-gap,
                 (14) error_record-bukrs,        '|' no-gap,
                 (12) error_record-accnt,        '|' no-gap,
                 (16) error_record-xblnr,        '|' no-gap,
                 (16) error_record-wrbtr1,       '|' no-gap,
                 (8)  error_record-waers,        '|' no-gap,
                 (13) error_record-secco,        '|' no-gap,
                 (20) error_record-sgtxt,        '|' no-gap,
                 (14) error_record-hkont,        '|' no-gap,
                 (15) error_record-wrbtr2,       '|' no-gap,
                 (10) error_record-mwskz,        '|' no-gap,
                 (20) error_record-gsber,        '|' no-gap,
                 (12) error_record-kostl,        '|' no-gap,
                 (5)  error_record-flag,         '|' no-gap,
                 (50) error_record-text1,        '|' no-gap,
                 (53) error_record-text2,        '|' no-gap,
                 (50) error_record-text3,        '|' no-gap,
                 (50) error_record-text4,        '|' no-gap,
                 (67) error_record-text5,        '|' no-gap,
                 (45) error_record-text6,        '|'  .
      endloop.
      uline at /1(538).
      format color off.
    endform.
    Report Header for Test Run                                          *
    form header.
      set left scroll-boundary column 70.
      format color 5 .
      write: 'REPORT :', sy-repid,
    38 'ERROR RECORDS DETAILS OF TEST RUN OF FB60(VENDOR INVIOCE POSTING)'
      ,123 'DATE :', sy-datum .
      format color off.
      skip 3.
      format color 1 intensified on.
      uline at 1(538).
      write : /'|',
              (6) 'Row No',                             '|' no-gap,
             (14) 'Company Code',                       '|' no-gap,
             (12) 'Vendor No',                          '|' no-gap,
             (16) 'Reference',                          '|' no-gap,
             (16) 'Invioce Amount',                     '|' no-gap,
             (8) 'Currency',                            '|' no-gap,
             (13) 'Section Code',                       '|' no-gap,
             (20) 'text',                               '|' no-gap,
             (14) 'G/L Account',                        '|' no-gap,
             (15) 'Item Amount',                        '|' no-gap,
             (10) 'Tax Code',                           '|' no-gap,
             (20) 'Business Area',                      '|' no-gap,
             (12) 'Cost Centre',                        '|' no-gap,
             (5)  'Error record Status',                '|' no-gap,
             (50) 'Company Code/Vendor',                '|' no-gap,
             (53) 'Vendor/With holding tax Liability',  '|' no-gap,
             (50) 'Company Code/ G/L Account',          '|' no-gap,
             (50) 'Company Code / Cost Centre',         '|' no-gap,
             (67) 'Invioce Status',                     '|' no-gap,
             (45) 'Invalid Balance',
            '|'.
      uline at /1(538).
      format color off.
    endform.
    thanks
    sitaram.

  • IDOC in Test Mode

    Hi,
    I am  using CREMAS
    I am submiting program  rbdapp01 to post the IDCOS
    Now I want to run in TEST MODE (simulation run) , not to create any vendors , but it should give success and error messages as usual
    I had found one TEST Flag on selection screen of  rbdapp01 , i tried using that but it is giving message "No Data Selected"
    Any inputs on this
    thanks
    chandra
    Edited by: Chandrasekhar Jagarlamudi on May 3, 2008 12:44 AM

    Hello Chandrasekhar, While I have not worked on this specifically here is what I think.
    The test flag indicator is not what you think. You cannot take just any IDOC and set the test indicator on RBDAPP01 and "simulate" it.
    in WE20 check the entry for any partner having CREMAS in the inbound profile. There you will find a field "Test flag". If that is checked for a particular partner that means any thing from that is in test mode and IDOCs from that Partner will be in TEST mode.
    So RBDAPP01 will pick IDOC in status "64" and if you have idocs from this partner and test flag field set , only then they will be posted as TEST and not commited.
    I hope you got my point. if in WE20 the TEST flag is not set then no matter what the rbdapp01 test flag does not do anything.
    AGAIN i have not used this , but this is my best guess, as no one had replied , I posted this.
    Regards

  • Run BAPI_MATERIAL_SAVEDATA in Test Mode

    Hi ABAPers,
    I am trying to run BAPI_MATERIAL_SAVEDATA. When I run, the details are being changed without using 'COMMIT WORK'.
    However, if I use ROLLBACK WORK before the end of the program, the database table does not get updated.
    Is there any other way I can run BAPI_MATERIAL_SAVEDATA in test mode without updating the Database table?
    Help is highly appreciated.
    Thanks!

    Do not call bapi commit function module in test moode, instead call bapi rollback FM, after u call the material save data bapi
    *(or)     *
    I understand that you are using the BAPI, but if you were to use LSMW direct input program instead, you would be able to run in TST mode, and make sure that all of the errors are taken care of before you actually update the system.
    *******************Reward points,if found useful

  • Visual Studio 2015 strange failure in debug mode

    Hi,
    I installed the latest vs 2015 on windows 7 (vmware) to test it compiling and running a set of applications (desktop) I have.
    The compilation is ok but when I try to run one of those apps, I get this error (running the debug version):
    Please note that if I run in release mode, there is no error at all!?
    Following the call stack, it seems that it fails somewhere in the STL releasing a temporary string or something like that. Unfortunately, I cannot create just a small example showing the failure.
    Any ideas of why will this failure be in debug mode only? Note that the call stack shows that this code:
        ~_String_alloc() _NOEXCEPT
            {    // destroy the object
            _Free_proxy();
    is run from xstring and it fails calling "_Free_proxy();". Also note that this is called ONLY when _ITERATOR_DEBUG_LEVEL is defined. No such code is run in release mode.
    Thanks,
    G.

    Hi,
    I think I found the issue and here are some details, hopping that it will help others running in the same problem(s).
    First, I did not have just the issue starting this thread, there was another issue related.
    I have created a C++ DLL exporting common functions I used in various applications. Most of the time I used this DLL from console programs (servers). However I had two GUI programs where I also used this DLL, one based on MFC and the other on WTL.
    These two programs have the issues as follows:
       When the MFC program is run in debug mode under the IDE, at exist the IDE will show a memory leak. This happened with both vs 2013 and vs 2015. This is a debug mode only issue.
       When the WTL program was run in debug mode under the IDE, it showed no problems at all when using vs 2013 but had the issue described at the starting of this thread under vs 2015. This is also a debug mode only issue.
    It turned out that mfc issue was caused by a known bug in MFC where the termination code of the mfc app, is run BEFORE the termination of code of the DLL. This way the IDE give a false memory leak!! There were actually no memory leaks, just the false alarm!
    I am not sure exactly what is going on in the WTL but the issue seems somehow similar in the sense that something not loaded in time from the DLL caused the problem.
    The solution: For both projects in fact it was very easy to fix this issue by setting the option to delay load the DLL. That in turn will force the MFC to wait to first unload the DLL and then
    there is no false leakage info! This also as I said fixed the WTL issue but I am not sure why? Anyway the WTL is no longer maintained (too bad!!) so who know?!
    Bottom line: if you use DLLs from WTL or from MFC, delay load your DLLs! Otherwise you may get this nasty false flags in debug mode and the assert issue.
    G.

  • IPhone Field Test Mode & PCS Readings

    Greetings,
    We are a subcontractor for AT&T Wireless, installing cellualar/PCS repeaters and DAS in Wisconsin. I've found the iPhone field test mode very useful in performing the site surveys.
    I've got two questions, mostly related:
    1) How does the FIELD TEST -> CELL INFORMATION section determine which channels to display?
    2) Is there a way to force it to display the strongest PCS signal?
    Many times, inside structures and in rural areas, the cellular (850MHz) signals will be much stronger than any PCS channels. It appears the iPhone displays the strongest 7 signals, regardless of frequency.
    We really need a way to force the iPhone to display the strongest PCS (1950MHz) signal, instead of bumping it for 7 stronger cellular (850MHz) signals.
    Any help would be greatly appreciated.
    Thanks,
    --Joe

    It can't be done.

Maybe you are looking for

  • Data transfer from iPhone 3GS to iPhone 4S

    I've just switched from an iPhone3GS to an iPhone4S, how do I transfer videos I took with the 3GS camera to the 4S....? The synching for these elements does not seem to work. Also my iTunes store says the Viber app needs to be "authorized" through th

  • If I accidently open an app and immediately close it down, it keeps reopening. Why?

    If I accidentally open an application, and I go to shut it down immediately, it automatically re-opens itself. It repeats and repeats until I let it complete the opening process. Does anybody have this problem? And if yes, have you resolved it? Thank

  • Multiple files need to be uploaded

    hi guys, I have a jsp form on which i accept from user the data ,images file and one or more audio-video file. Can anyone tell me how to upload multiple files at a time.I was able to upload only one file at a time.How to upload more than one file on

  • MIRO payment method

    Hi Gurus When we do a MIRO transaction with a PO reference, the payment terms are defaulted in the MIRO doc , but not the peyment method. I have the Payment method maintained in Vendor master. Its till not defaulting in MIRO. Any advise on how to get

  • Installing Oracle Web Services Manager 10.1.3.1 - ZipFileException

    I was attempting to install Oracle Web Services Manager in a cluster and place both the Gateway OC4J and the WSM OC4J in the same oracle home. When Adding New Component for Gateway, received a ZipFileException.