AFAB restart and repeat

Hi Forum,
I would like to seek advice.
What is the difference of AFAB restart and repeat run?
Thanks

Hi,
Repeat Run: If the regular run was executed and transactions were posted to the assets, for the depreciation to be effected we use repeat run. In this only those assets for which transactions were posted will be selected and depreciation will be posted.
Restart: If the regular posting run was terminated and changes were effected at the backend we use restart option to complete the process.
Thanks,
Giridhar

Similar Messages

Computer wont start up, goes to BSOD for split second, restarts and repeats cycle

Had an HP laptop for a few months, everything was working fine until today when I was using my laptop in the car using spotify, then spotify froze and my comp froze so I restarted and to my dismay my computer would not boot. After pressing the on button, my computer would display the starting windows text and logo for an abnormal amount of time and then show the blue screen of death for a split second. Then it would repeat the cycle again and again
I tried to system restore using the f11 button on startup, it would say loading files and then starting windows and then I end up at a grey screen with only the cursor and nothing else. Can move the cursor but theres nothing to click on
Help!! How to fix or do a system restore to factory settings

Hi robertwtf,
What is your product number?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Boots to windows startup screen, flashes blue screen, restarts and repeats

HP ENVY H8-1414 Product #H3Z00AAR
Windows 7 Ultimate 64-bit
Alright, so here is my issue. I turn on my pc and it gets as far as the windows startup screen, flashes a blue screen error for about half of a second and then restarts it self. My HDD is recognized in the bios. Tried a memory test in diagnostics and it passes. Tried a hard disc check and it passes the SMART check but fails the Long DST with a failure ID of 0GF21L-0006LR-WPVX0K-61C703 (no idea if those a zeros or O's)
I've also tried the startup repair but it did nothing. So I removed the hard drive and tried to use it in a different PC but had the same issue so I figured the hard drive went bad. Then I tried formatting a spare hard drive and installed a fresh copy of windows 7 on it, tried it on a different PC and it works just fine. However, when I try to use that hard drive on the HP ENVY I get the exact same problem even though it worked just fine on a differenct pc.
I purchased this PC refurbished about 3 months ago, the warrenty just ended a week ago. There have been no hardware or software changes on it at all. This thing worked flawlessly last night... I locked the computer before bad and I woke up to this. No power outages over night or anything. It just doesn't make any sense.

Here are the specs for your HP ENVY h8-1414 Desktop Computer. According to the specs, this model came from the factory with Windows 8 installed. The "blue screen" and restart are normal for Windows 7, when it encounters an error, unless you have altered the default settings.
The LONG DST failure is indicative that the hard drive has failed or is about to fail. Unless the hard drive is moved to an identical or very similar computer, Windows will encounter a "blue screen. This is true with the original hard drive moving from the h8 computer to the other computer and the test hard drive from the other other computer moving to the h8 computer.
Try placing the "test" hard drive in the h8 computer and installing Windows 7 from a DVD or USB stick. If you have any problems, please post back with full error messages and screen shots. Also indicate what stage of the install Windows 7 was doing tat the time.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Iphone 4s freezing at start up then shuts off and keeps restarting then repeating that process over and over. I have tried to reset the phone two different ways and still this problem occurs after I update it or turn off the phone.

yes the title says most of what is going on.
I recently reset my phone, losing all contacts and pictures. It was working fine, then after I updated it, it will not turn on completely.
It starts up with the apple logo
-goes to the ios 6 (please slide to open) screen
-then shuts off
-and repeats the process unless I shut the phone off manually
I have tried to hold the lock and the home button down to manually reset the phone
I have also tried reseting the phone completely previously, and I still have this problem.
Any ideas?
Thank you!!

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited. In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items. I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible. I simply deleted that item and now I don't have the situation you described and my wireless is connected. Hope this helps!

Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd. Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows u

Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd.
Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows up on the desktop where I can then eject it.
I have checked and double checked the finder prefs and all looks normal showing a check mark on CDs,DVDs etc. (the ones I want to show up on the desktop)
I have reset the PEAM, repaired permissions with both the disk utility on the computer and the disk utility when I start up in the Recovery Disk. I did notice that sometimes the permission repeat the same correction several times before it moves on, and sometimes it doesn’t. I have Windows installed on a partition but I keep it unmounted until it is needed for my wife’s work. The dock seems to be just fine and all the apps seems to run just fine. When I insert a photo CD iPhoto does not open but when I insert a music CD iTunes does open.
Also, most every time I open iPhoto it takes a long time(sometimes as long as 2 minutes) for it to load.
Sometimes my Mail (Mail 5.3) does not post new mail but most of the time it does.
Once and a while it seems like the computer slows way down but then it seems ok ten minutes later.
All of these ‘things’ seemed to have happen suddenly and I have not downloaded anything from the internet in some time.
Of course the warranty and extended warranty are both no longer in effect having had this computer for more than three years.
I am running Java and Adobe Player because some of the sites I go to a lot require both.

I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
http://www.crucial.com/store/drammemory.aspx
I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
I hope you'll post here with your results!

In place upgrade to 2012 R2 fails, Setup can't continue. Your computer will now restart, and your previous version of windows will be restored.

I have multiple Windows Server 2008 R2 machines in which I am attempting to do an in place upgrade to 2012 R2, and it is repeatedly failing.
Setup gets all the way through, and it says Getting ready, followed immediately by an error saying: Setup can't continue. Your computer will now restart, and your previous version of Windows will be restored.
I am attempting to install:
Windows Server 2012 R2 Datacenter (Server with GUI)
x64 Date modified 3/18/2014
I have found several posts, many discussing how disk space can be an issue, I have increased disk space so it shouldn't be an issue. I have also made sure the only only partition on disk 0 is C: and system reserved.
I have disabled all unessential services and went through and removed all unessential applications, and extras. Still getting the error.
Here is the update log
2014-11-24 08:20:20:715
888 ed8
AU AU initiates service shutdown
2014-11-24 08:20:20:715
888 ed8
AU ########### AU: Uninitializing Automatic Updates ###########
2014-11-24 08:20:20:840
888 ed8
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:20:20:840
888 ed8
Service *********
2014-11-24 08:20:20:840
888 ed8
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-11-24 08:20:20:840
888 ed8
Service *************
2014-11-24 08:23:27:265
892 9a0
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0500) ===========
2014-11-24 08:23:27:281
892 9a0
Misc = Process: C:\Windows\system32\svchost.exe
2014-11-24 08:23:27:281
892 9a0
Misc = Module: c:\windows\system32\wuaueng.dll
2014-11-24 08:23:27:265
892 9a0
Service *************
2014-11-24 08:23:27:281
892 9a0
Service ** START ** Service: Service startup
2014-11-24 08:23:27:281
892 9a0
Service *********
2014-11-24 08:23:27:635
892 9a0
Agent * WU client version 7.6.7600.320
2014-11-24 08:23:27:635
892 9a0
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-11-24 08:23:27:635
892 9a0
Agent * Access type: No proxy
2014-11-24 08:23:27:635
892 9a0
Agent * Network state: Connected
2014-11-24 08:24:14:827
892 9a0
Report CWERReporter::Init succeeded
2014-11-24 08:24:14:827
892 9a0
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-11-24 08:24:14:827
892 9a0
Agent * Prerequisite roots succeeded.
2014-11-24 08:24:14:827
892 9a0
Agent *********** Agent: Initializing global settings cache ***********
2014-11-24 08:24:14:827
892 9a0
Agent * WSUS server: <NULL>
2014-11-24 08:24:14:827
892 9a0
Agent * WSUS status server: <NULL>
2014-11-24 08:24:14:827
892 9a0
Agent * Target group: (Unassigned Computers)
2014-11-24 08:24:14:827
892 9a0
Agent * Windows Update access disabled: No
2014-11-24 08:24:14:951
892 9a0
DnldMgr Download manager restoring 0 downloads
2014-11-24 08:24:14:981
892 9a0
AU ########### AU: Initializing Automatic Updates ###########
2014-11-24 08:24:14:997
892 9a0
AU # AU disabled through Policy
2014-11-24 08:24:14:997
892 9a0
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-11-24 08:24:15:043
892 9a0
AU Initializing featured updates
2014-11-24 08:24:15:043
892 9a0
AU Found 0 cached featured updates
2014-11-24 08:24:15:397
892 9a0
Report *********** Report: Initializing static reporting data ***********
2014-11-24 08:24:15:397
892 9a0
Report * OS Version = 6.1.7601.1.0.196880
2014-11-24 08:24:15:397
892 9a0
Report * OS Product Type = 0x00000007
2014-11-24 08:24:15:428
892 9a0
Report * Computer Brand = VMware, Inc.
2014-11-24 08:24:15:428
892 9a0
Report * Computer Model = VMware Virtual Platform
2014-11-24 08:24:15:428
892 9a0
Report * Bios Revision = 6.00
2014-11-24 08:24:15:428
892 9a0
Report * Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-11-24 08:24:15:428
892 9a0
Report * Bios Release Date = 2013-07-30T00:00:00
2014-11-24 08:24:15:428
892 9a0
Report * Locale ID = 1033
2014-11-24 08:24:15:582
892 9a0
AU Successfully wrote event for AU health state:0
2014-11-24 08:24:15:582
892 9a0
AU Successfully wrote event for AU health state:0
2014-11-24 08:24:15:582
892 9a0
AU AU finished delayed initialization
2014-11-24 08:24:20:865
892 6a0
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:55:38:187
892 9a0
AU AU initiates service shutdown
2014-11-24 08:55:38:187
892 9a0
AU ########### AU: Uninitializing Automatic Updates ###########
2014-11-24 08:55:38:250
892 9a0
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:55:38:297
892 9a0
Service *********
2014-11-24 08:55:38:297
892 9a0
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-11-24 08:55:38:297
892 9a0
Service *************
Any ideas on how I can resolve this, or further troubleshoot?

I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
The problem was the separated System Reserved Partition. After I removed using this instructions:
http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
The upgrade ran ok, and now have my DC as Windows 2012 R2.
Hope that helps!.

My iPhone4 keeps restarting and now I can't even restore it. HELP!

My 2 month old iPhone4 keeps restarting and after trying to restore it its absolutely useless becauseit wont stay on long enough to restore. My entire business is on this phone and I would really prefer to not have to send it back to Apple.

I have a similar issue with my iPhone 4. Tell me: Have you been able to solve your problem yet?
If yes, then please share! I have a short term solution and a long-term one for you if not, and I am at the point of going to my long-term solution. So I, too, am all ears. If you haven't resolved the problem yet, then here is...
The short term solution: Force your iPhone into Recovery Mode (also known as DFU mode) by following Apple's instructions here, in the case that you are "unable to update or restore the iPhone's iOS". Following the instructions on that page may fix your problem right then and there. However, if you continue to have problems (like getting it out of DFU mode, as I have had with this fast-auto-restart problem), then it may not fix the problem. In which case, here's what to do: Download a free program called RecBoot for Windows or Mac. Once installed, follow the directions for its use on that page. If the phone is in Recovery Mode (DFU mode), Recboot will tell you, and pressing one of RecBoot's two buttons will take it out of DFU mode. If the phone is NOT in DFU Mode, RecBoot will likewise tell you -- and the other button will place it IN DFU mode. I recall bouncing it between in and out of DFU mode (as a last resort) when I tried a complete factory restore and the phone kept restarting itself mid-restore. RecBoot was the one thing that finally got the phone's attention, and enabled the thing to accept a restore. I've needed RecBoot ever since -- upgrading to iOS 5, then 5.0.1, then 5.0.2...
A few things I've noticed about my issue: I still have the auto-restart problem, but for a while it started following a rule: It would only auto-restart repeatedly (and relentlessly) when the phone was charging and turned off (i.e. asleep -- not powered completely down). After a few months, the problem has evolved: The phone behaves itself when it is turned on, charging or not -- but turned off, the phone manically enters the restarting-every-few-minutes loop. Whether it's on a charging cable or not: If it's off, it puts itself back in the loop. Then, the other day, the problem showed signs of morphing again: restarting in the middle of listening to a podcast -- not every 3-5 minutes, but sporadically -- and the phone was turned on. That was indeed the last straw for me. Which leads me to...
The long-term solution: I am led to believe that the problem may involve a faulty battery, or an element on the Logic Board. I recently had a battery replaced in my phone, and I am questioning the replacement. However, I am taking my phone in to an Apple Store. Last time I took my iPhone in (with a warranty issue under the AppleCare Plan I ALWAYS get), they replaced the phone on the spot. So if you can make your way to an Apple Store, the chances are good that at least you shouldn't have to wait for days to get a replacement.

Why the step-and-repeat function (command+d) isn't working in Illustrator CS5?

Why the step-and-repeat function (command+d) isn't working in Illustrator CS5?
I am trying this. Take an object, move it some inches on the right while holding the option key, so I duplicate it.
Usually, I pressed on command+d to duplicate this action on and on (duplicate the object and moving it some inches away), but now it is not working.
any idea?

kwakoo,
It may be time for the list:
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Multiple Colourful barcodes not restarting and repeted 3 beeps

Im having multiple Colourful barcodes appearing across screen, i shut down my macbook pro 13" late 2012, once shutdown it will not restart and is beeping 3 times repetadly please help if you have any ideas, I wasnt touching it at the time and only had pages running

Mac computers can produce several sounds when starting up. Your Mac should produce the familiar single tone on start up. If you hear another tone it can indicate problems with your computer.
• 3 successive tones, a 5 second pause (repeating): This indicates RAM does not pass a data integrity check
http://support.apple.com/kb/HT5860?viewlocale=en_US

Intermittent System Hang at Restart and Shutdown

Hi Everyone,
I finally got around to upgrading my old iMac G4 to Leopard yesterday, and almost immediately found a problem that's driving me nuts...
It started right after I installed Leopard from the DVD using Erase and Install, and updated to 10.5.7 using the combo updater. After the combo install completed successfully, I clicked "Restart," and was immediately left with a blank desktop (just the wallpaper, no icons, no menubar and no spinning pinwheel/spokes on the desktop as some others have seen) and the cursor (which is responsive). It looks like the Finder and Dock quit, and the restart or shutdown procedure then came to a halt. Some keyboard shortcuts still work, such as the ones to open the shut down dialog box, and the force quit box--but clicking any of the buttons does nothing. The keys for brightness, volume and eject also still work. The HD was quiet, and after about 5 mins I held in the power button to shut down. After restarting, I opened Console and found no log entries at the exact time I clicked Restart--in fact, nothing logged until the next power up.
I restarted and shut down a few times after that, some while using Software Update. About half of those times, the hang occurred, and if there were any other open apps, they did quit along with the Finder and Dock. I decided to reinstall 10.5, using Disk Utility on the DVD to write zeroes to the disk before reinstalling. From there, I applied the 10.5.7 combo update--and from there the problem started again, and still apparently without any log entries. It's worth mentioning that I tried Leopard on an external FW LaCie HD connected to this Mac a few months ago (ver. 10.5.4 then), and the problem existed then as it does now.
Other tidbits: The internal HD I'm using is less than a month old, and worked well with Tiger. The Mac passed the Apple Hardware Test on the original install CD. Disk Utility on the Leopard DVD found no problems and no permissions errors. I've used the Spotlight prefpane to stop it from indexing the HD, and I have Time Machine turned off. I've reset the PRAM. There are no peripherals attached other than the keyboard and mouse. There is no third party software installed (yet). I've tried looking at the forums on MacFixIt, and using google, but haven't found an answer. Any ideas?
Thanks for helping,
Eric

Update... After trying to find the source of the problem for a three weeks, including trying another Erase and Install using Kappy's suggestions, only to have the hang continue to occur repeatedly, I gave up and decided that Leopard has an unresolved bug that causes these symptoms on my old G4 iMac.. With the iMac going to Vintage status this month, I decided to reinstall Tiger on it, and it's future is now going to be life as a wireless print server.
I bought a new Mac Mini with 10.5.6 preinstalled. Since the new Mac has a lot of software installed that I won't use (print drivers, languages, Garageband, iWeb...), I did an Erase and Install on the first day, and used the Combo updater to go to 10.5.7. Within a few hours of use, with no 3rd party software installed, the hang I described happened again--the Mini showed the exact same symptoms as the old iMac. Thinking it may be something with the Combo updater, I did another Erase and Install, and this time used the Delta update to go to 10.5.7. Since then--about two weeks now--the hang has not returned.
As a side note to this, my parents own an Early 2008 iMac which shipped with 10.5.4 and was updated in March to 10.5.6 using the Combo updater. While helping them with it recently, it hung at restart--showing the same symptoms as my two Macs. This happened after they used it for about two months with no problems. I did an Erase and Install, and used Software Update to go to 10.5.7 (meaning the Combo updater was used). The hang hasn't happened again in the past two weeks.
With 3 different Macs now showing these symptoms, I'm convinced it's a Leopard problem, maybe something in the Combo updaters. I'm going to be updating my wife's Powerbook G4 to Leopard using a retail Leopard disc, and will have to use a Combo updater to bring it to 10.5.7. If the hang occurs with her Mac, I'll post a followup.

Restarted and nearly everything is gone

After force closing a non-responsive program, I restarted my macbook pro and it prompted a user login, then opened as though this was the first time I had booted up this machine. It started the setup video and then asked to register it. At this time, all folders are still there but no files in any of them.. all applications are "there" but not able to open any of them, their icons all show as the TextEdit icon. Not even preinstalled apps are there.. My hard drive still shows 70gb in use and after some searching realized all if my music files are still in my itunes folder which accounts for about 30gb. I have no idea what to try to fix this or what went wrong? Anyone have any solutions?

Welcome to Apple Discussions!
Try booting from your install disc. Select your language, and then go to "Utilities" on the menu bar and select Disk Utility. When it opens, select your hard drive in the left column and go to the First Aid Tab. Click on "Repair Disk" and repeat until there is nothing left to repair.
If you get any messages in red letters that say that Disk Utility can't repair the drive, you can try a stronger utility such as Disk Warrior.
When you have to do a forced shutdown like you describe, it is always prudent to repair the drive afterwards. The repair is to the complex software on the drive, which can get messed up with a forced shutdown.
Good luck!

HELP: I sync my iphone ios 4 to another iphone ios5, sync was completed but after a few mins, iphone will auto restart and freezes at the home screen which I can't unlock. I have to hold the "home" "off" button to restart the phone.

Dear all, please hel!!
I sync my iphone ios 4 to another iphone ios5, sync was completed but after a few secs, the iphone with the IOS 5 firmware will auto restart and freezes at the home screen which I can't unlock. It will then freeze for a few secs before repeating the restart phase again and again and again.
To solve this issue, I have to hold the "home" + "off" button to restart the phone. Afterwhich, it will restart the phone. However, although my stuff are still on the phone, all my sms are gone.
Can someone please assist urgently.
My data was transferred from another iphone 3GS which is running an IOS 4.0.1 to another 3GS running ios 5.0.1
Is there a serious compatibility issue with both firmware?
Please help.
Thanks!

Can't I just set up Exchange as one of my calendars in ical?
Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
What is the best work around for this?
None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

Hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on.

hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on. I Can`t press any button.My Mouse still works. Battery is charged. Alt-cmd-escape doesn`t work It even after a forced shutting off, the problem is the same.   what should i do? Thank you for your help.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
     a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. The battery is distinct from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Continuous Restart and Optimizing Apps

Officially updated to Android Lollipop 5.1.1 last week.Been in good condition until I restarted the phone today.Now, whenever it's powered up, it optimizes apps, and restarts after optimizing is finished, without reaching lockscreen. I leave it like that for 3 hours hoping it will solve itself, but it just keeps on restarting and optimizing repeatedly.Have to switch off by the button beside the sim card slot.Tried to fix it with SonyPC Companion but it's not detected when connected to laptop.Your help is truly appreciated.

Performing a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 80% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).

AFAB restart and repeat

Similar Messages

Maybe you are looking for