Afte Installing Upgrade some Fonts doesn't show right anymore

I've install the 10.6.3 and everything work fine until I try to use Pages and one of my oldest font ITC Franklin Gothic does shown badly strange character and so on , It works well in text edit. I will post the same post on Pages support Forum
Thanks
Danilo

I think I figured it out (atsutil databases -removeUser) but that didn't work.
Basically I am able to load fonts (onto a freshly installed (not upgraded) Snow Leopard build) in font book and activate them. They are available in Text Edit, but do not show in any of the Adobe CS4 apps, MS Office 2008 or Quark.
Any help that anyone could provide would be greatly appreciated.

Similar Messages

I have some apps on my ipad and I want to install more ,but it doesn't show the apps on the home and when I try to open them from the AppStore it doesn't work , what should I do?

I have some apps on my ipad and I want to install more ,but it doesn't show the apps on the home and when I try to open them from the AppStore it doesn't work , what should I do?

Are you not seeing the icon of the app you just downloaded (it happens sometimes, and the quick fix is to reset your iPad)? Or are you running out of space on your iPad?

I Installed InDesign and it doesn't show up in my tools menu in Bridge

I Installed InDesign and it doesn't show up in my tools menu in Bridge. I tried reinstalling the application as well as ran updatez for all my adobe products. Does anyone have any idea why it isn't there?

I was wondering the same thing. Does it have something to do with not have the full CS3 Suite installed?

Western digital hard drive doesn't show up anymore

I bought a Macbook Pro a few months ago and I've been using my Western Digital external USB hard drive with up until now with no problems. Then today for some reason, I turn my computer on and the drive doesn't show up anymore. It doesn't show up in disk utility either. I've rebooted a few times but no luck. I inserted a flash drive and it mounts ok so it's not the USB port. I even switched usb cables just in case the cable was bad. Any suggestions?

Hi there
Sorry to hear you are having trouble with your Mac.
Is the ext HD a powered drive (needs AC power to run) or portable? (smaller, doesn't need to be plugged in to AC)
If its AC powered, check that all the usual lights are lit up on it (flashing activity light, power light etc), if not, then you would need to contact WD.
You can also try resetting the SMC & PRAM, as I have seen this cause a HD to not mount before.
Cheers

Font installed on Windows but doesn't show in Photoshop

I have Arial Narrow Bold etc. installed in the Windows fonts folder but it still doesn't show in Photoshop CS6. Arial Narrow shows but not the bold version. It shows up in InDesign, however.

Font doesn't show up for Flash

I have a font located in my System/Library/Fonts folder that shows up in my Font Book. I can also see the font in my font list while in Adobe PhotoShop and Illustrator...but not in Flash. I am using CS3. Does anyone have an idea why this may be happening?
I wasn't sure if this would be an Apple issue or Flash.

Try the Adobe forums.

Some font families don't work anymore with Firefox 4 - why?

Since upgrading to Firefox 4 some font families (like for example "Script") don't work anymore though they were working with Firefox 3.6. How can one solve this?

You can see it for example here in [http://en.wikipedia.org/wiki/Font_family_%28HTML%29 Wikipedia] where (at least on my screen) most font-families look the same now. I have also attached a screenshot of the table in the article so you can see.
I don't actually know which font I have installed as I didn't install any in addition. It was propably some system font (is suppose Lucida Handwritig oder Lucida Calligraphy from the looking).
If there are any special installments required please tell me because I have absolutely no idea about such things.

"Add image to iPhoto Library" in safari doesn't show up anymore!

Hey, I got a problem with my computer. Normally, When i right click an image, a tab window shows up with an option to "add image to iphoto". Now it doesn't come up anymore. Please tell me how to fix this!

Well given that we don't know what version of OS X you're on, what version of Safari you're using and it's the iPhoto forum and not the Safari one, the best I can suggest is that you try repair permissions with Disk Utility

Music app doesn't show audiobooks anymore

I used to listen to podcasts, audiobooks, and other recordings on my iPhone, but starting yesterday, the categories in the Music app changed so that I can't access these files anymore.
I tried to open them with other apps (Podcasts, Audible) and it didn't work either.
(to be clear: I can listen to audobooks from Audible in the Audible app; I can also listen to podcasts that I subscribed to in the Podcasts app; but if I download single episodes of podcasts straight from the websites or have other audio files that I declare as audiobooks in iTunes on my Mac and that show up there under audiobooks, there are the ones that don't show up anymore -- though when I connect my phone to the Mac and check from there it shows that the files are on the phone (though they are inaccessible via Spotlight too)).
Here a screen of what my Music app looks like now, the category "Audiobooks" just disappeared:

Which model phone do you have?
I have a 32 GB 4S and the alphate is visible on, Artist, Songs, Albums, Composers and Genres, not visible on compilations and playlists.
Sounds like you might need to take it to apple since you alreade did a restore.
I would hate to suggest this, but you might need to restore as new and see what happens before you restore from a backup.

Fonts do not show right in Pages after upgrading to 10.6.3

I've install the 10.6.3 and everything work fine until I try to use Pages and one of my oldest font ITC Franklin Gothic does shown badly strange character and so on , It works well in text edit. I will post the same post on OSX Leopard support Forum
Thanks
Danilo

I'm also having loads of problems since installing the latest 10.6.3 update ... with all of iWork 09.
Pages: I can't see what I type or paste in the normal view (so can't add or edit anything). I see the content for about a second when I go to full screen mode but then it goes all black. When I hit ESC I see it again for about a minute before I get back to the plain white normal view.
Keynote: I can't see the slide content in the normal view (so can't add or edit anything). I see the content when in slideshow and also in the slide navigator on the left. When viewing in slideshow I see the content in bottom left only (it doesn't fill the screen like it used to before I ran the update)*
Pages: I don't see any cells in normal view.
I'm thinking that it is something to do with screen resolution or some other viewing setting because of my comment marked *
I'm going to try running disk permission repair but it's a problem getting someone from IT dept to enter admin password every time I do anything ;-o
I would love to roll back to 10.6.2 but I don't believe it can be done easily.

Some systems doesn't show up in the all systems. why?

Hi
We had a SCCM 2007 sp2 environment before. then we changed the server and installed a fresh SCCM2012.
We use active directory client deployment method. even i tried installing the client from the exe file of ccmsetup.exe
until now 120 systems client has installed successfully but we faced two issues:
1- on some systems ccmsetup process exits after 10-20 seconds!!
2- on some systems even after a successful installation, the system wont show up in the config manager console.
any advise or help?
thanks

Yes, those are client side logs. If the client cannot communicate with the server, there is no way for the server to have information about the client in its logs.
Jason | http://blog.configmgrftw.com | @jasonsandys
Thanks a lot, but I couldn't find any errors. Just in ClientStartupManager.log there is an error :
[----- STARTUP -----] ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
Machine: OA-NEW ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
OS Version: 6.1 Service Pack 1 ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
SCCM Client Version: 5.00.7958.1000 ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
'RDV' Identity store does not support backup.
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
CCM Identity is in sync with Identity stores
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
Unable to backup CCM Identity in any Identity stores. (0x8000ffff).
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
Deleted Certificate ID from registry successfully
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
Client is set to use HTTPS when available. The current state is 224.
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
[RegTask] - Executing registration task synchronously.
ClientIDManagerStartup 12/31/2014 11:01:48 AM
5420 (0x152C)
[RegTask] - Client is already registered. Exiting.
ClientIDManagerStartup 12/31/2014 11:01:48 AM
5420 (0x152C)
Read SMBIOS (encoded): 530079007300740065006D002000530065007200690061006C0020004E0075006D00620065007200
ClientIDManagerStartup 12/31/2014 11:01:49 AM
5420 (0x152C)
Evaluated SMBIOS (encoded): 530079007300740065006D002000530065007200690061006C0020004E0075006D00620065007200
ClientIDManagerStartup 12/31/2014 11:01:49 AM
5420 (0x152C)
No SMBIOS Changed ClientIDManagerStartup
12/31/2014 11:01:49 AM 5420 (0x152C)
SMBIOS unchanged ClientIDManagerStartup
12/31/2014 11:01:49 AM 5420 (0x152C)
SID unchanged ClientIDManagerStartup
12/31/2014 11:01:49 AM 5420 (0x152C)
HWID unchanged ClientIDManagerStartup
12/31/2014 11:01:50 AM 5420 (0x152C)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE
ClientIDManagerStartup 12/31/2014 11:01:50 AM
5420 (0x152C)
Windows To Go requires a minimum operating system of Windows 8
ClientIDManagerStartup 12/31/2014 11:01:50 AM
5420 (0x152C)
Computed HardwareID=2:FA22FFF79BAA23AC5E743AF0CD168E733CDAA368
Win32_SystemEnclosure.SerialNumber=Chassis Serial Number
Win32_SystemEnclosure.SMBIOSAssetTag=Asset-1234567890
Win32_BaseBoard.SerialNumber=131118928908938
Win32_BIOS.SerialNumber=System Serial Number
Win32_NetworkAdapterConfiguration.MACAddress=BC:EE:7B:9C:BE:8B
ClientIDManagerStartup 12/31/2014 11:01:51 AM
5420 (0x152C)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:FA22FFF79BAA23AC5E743AF0CD168E733CDAA368
HardwareID2=6DE60500010000FE
ClientIDManagerStartup 12/31/2014 11:01:51 AM
5420 (0x152C)
Mahdi. Ghorbanpour http://yektagostarhezare.ir

DVD burn has SATURATED reds, yellow font doesn't show well as iMovie file

hello all. I am burning a DVD for a film festival submission and I am running across a color problem. I am on a PowerMac G5 last version running 10.4.11 using Toast to burn a DV or MOV file of the movie. the result is a DVD where all the reds come out in the picture. The actors faces have visibly more red in them. Yellow fonts for the credits do not show well. The iMovie project and DV and QT files all look great. Can anyone help on something I may be doing wrong? This is for a film festival submission, the film has a great chance to make it, and this burn makes it look terrible. HELP!

Hi
Strange - only thing that comes to my mind is when I added some photos to a movie
they where .bmp from a PC
Very red !
What kind of material did You use to make Your movie ?
• .avi, .wmv, .wma, .mp3, .mp4, .m4p, .jpg, .tif, .aiff, streamingDV from miniDV tape
Camera, miniDVD or else ?
What DVD did You use ?
• Brand
• Type - DVD-/+RW ?
• Single Layer or DL
Free space on boot hard disk - How much ?
Version of QuickTime ?
Yours Bengt W
Yours Bengt W

Afte installing mountain lion, preview doesn't work anymore

I intalled mountain lion (actually, it was done at the apple store) and after that, I no longer can use Preview. I'm tryng to scan a doc from my working printer to my mac.

Image Capture is one of the applications that comes with the OS and there doesn't appear to be a separate download for it. You would have to reinstall the OS to get in back if it isn't there.
Depending on the printer you have, you may have an option to scan from System Preferences/Print & Scan.
try deleting the .plist - com.apple.Preview.LSSharedFileList.plist
You need to look in your user Library/Preferences for the .plist. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Preferences/com.apple.Preview.LSSharedFileList.plist
. Move the .plist to your desktop.
Open the application and test. If it works okay, delete the plist(s) from the desktop.
If the application is the same, return the .plist(s) to where you got them from, overwriting the newer ones.
If you prefer to make your user library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

GDM doesn't show up anymore after installing catalyst, Xorg works fine

Hi,
I just installed catalyst-hook from Vi0L0 and my situation is this: when I boot my computer the output on the tty1 gets stucked after the checking the filesystem with systemd-fsck and nothing appears after that, no blinking cursor, no prompt that asks me for a login, no nothing, nothing progress in both textual and graphic modes ; however, if I switch to the 2nd terminal with ALT + F2 I can login and start Xorg via the usual
startx
and apparently no session is ever being initiated before that so whatever is happening on tty1 must prevent xorg from even starting a new session.
What I tried
The main problem is that I have absolutely no idea what this is about, It could be anything ranging from modprobe to gdm, but since I have an audio card that only works properly when the appropriate configuration in
/etc/modprobe.d/modprobe.conf
gets loaded and I can even start a desktop session, I'm assuming that the core stuff on my system ( kernel modules and Xorg ) is working properly .
[ Test 1 ]
aticonfig --acpi-services=off
doesn't fix anything and doesn't make a difference at all
[ Test 2 ]
/etc/gdm/custom.conf
# GDM configuration storage
[daemon]
AlwaysRestartServer=true
[security]
[xdmcp]
[greeter]
[chooser]
[debug]
Apparently this should fix the same problem experienced by KDM users; as far as I can tell this changes nothing .
Bottom line
I can't get to the GDM login anymore after installing catalyst-hook, I can use the fglrx without any major issue, I can start a desktop session with startx from tty2 and tty1 gets stuck before anything "graphical" can actually appear on the screen and probably non even Xorg gets any chance of running on tty1 .
What kind of problem is this ?

arkur wrote:
clfarron4 wrote:
Have you seen the catalyst-fix-gdm or the AUR package?
What happens with another different DM?
Also I can't find that package with pacman, I also would like to fix this by myself, not because I don't trust the author of the package, but I just don't want to install too many packages and for the core things I would like full access to the essential configuration .
Anyway it looks like that GDM is the problem this round.
You won't find it with pacman, because it is in the AUR and you will to compile it to install it.

DVD burn has SATURATED reds, yellow font doesn't show well

hello all. I am burning a DVD for a film festival submission and I am running across a color problem. I am on a PowerMac G5 last version running 10.4.11 using Toast to burn a DV or MOV file of the movie. the result is a DVD where all the reds come out in the picture. The actors faces have visibly more red in them. Yellow fonts for the credits do not show well. The iMovie project and DV and QT files all look great. Can anyone help on something I may be doing wrong? This is for a film festival submission, the film has a great chance to make it, and this burn makes it look terrible. HELP!

Typically this forum supports the color grade application "COLOR", part of the Final Cut Studio suite.
What you have appears to be a compression problem.
Try exporting your Quicktime as an explicit m2v file for use with either Toast or DVD Studio Pro.
jPo

Afte Installing Upgrade some Fonts doesn't show right anymore

Similar Messages

Maybe you are looking for