After a page loads the colors are right, then it suddenly turns light blue and the text fades to gray

When I open google, the page immediate comes up right with a white background, and black text. Before the page finishes though, the background turns to light blue, and the text turn gray. The logos show up right framed in the white background but the rest of the page is light blue. It happens in other websites as well. There backgrounds are right, but where the text is located is like in forums the text is grayed out, and there background colors are faded too.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Similar Messages

  • On my screen the image is clear and the colors are right, However when I print to either my epson of HP the image color is off.

    On my Mac screen my photo image is clear and the color are right, however when I print to either my epson 2200 or my HP printer bother the colors are off and the image is not as clear as on the screen.

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HT201412 my phone was charging and then it wouldnt turn back on and the lock button is jammed so i cant really do anything. please help me, i havent had it for very long.

    My phone was charging and then it wouldnt turn back on and the lock button is jammed so i cant really do anything. Please help me, i havent had it for very long.

    i put that i held down the home button and all that... sorry, should of made my message a little clearer hun.. but i did try that, ive been searching video's on the net trying to figure out how to fix the problem, but nothing seems to be working... ive just tried pluging the usb lead into my phone while holding the home button then connecting it to my computer to see if itunes fires up, but even that didnt work... i dont know what else to try.

  • My ipad says it can't connect to the server although other in the house are able to.  Sometimes turning it on and off seems to help.  Other times you just have to keep trying.

    My ipad says it can't connect to the server although other computers in the house  one the same wifi are working fine.  Sometimes turning it on and off will help.

    KKbrummund, thank you for sharing your concerns about your Kin device. I understand that it can be frustrating having these issues with a new device. At this point, since the phone is able to access internet, but just can't connect to Windows Live, there may be a problem in the phone itself. We can submit a trouble ticket to our network team to see if there are any network issues causing this. Also, if you are within your 14 day worry free guarantee (this may be different for some indirect agent locations) you may want to try exchanging your device.
    Please let me know what option you decide to take. If you are past the worry free guarantee or have had the phone exchanged already, I can submit the trouble ticket for you.
      MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • When I select a menu item, the highlight is light blue and the item font color goes white. It is very difficult to read? Any solution?

    When I select Bookmarks, the menu item (Bookmarks) is highlighted in light gray color; and the letters of the work itself (Bookmarks) turns white. This same thing happens when you go into individual bookmark selections. It is very difficult to read. Are there any alternatives that can be set by the user?

    Are you using a standard Windows theme?
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Quick selection tool doesn't snap to to the nearest area. Working more like a lasso tool and the add layer button doesn't seem to creat the cutout that it should.

    Quick selection tool in elements 13 doesn't snap to the nearest border area of the photo. Works more like a lasso. Also the add layer button when clicked on only brings up a black layer, not a black mask with a hole where I just cut.

    Which OS are you working on?
    Please try resetting your tools from Photo Bin flyout menu.
    1. Open Photo bin.
    2. Click on Fly Out menu
    3. Click on option Reset all Tools
    4. Relaunch Editor13
    and see if it helps.
    Thanks,
    Anwesha

  • Watermark added to photos - but the colors are faded now!

    Hi!
    Hope somebody can help me, cause I couldn't find this problem in the forum yet.
    I'm using Automator mostly for resizing my photos and to add a watermark. But after the workflow is finished the colors are always quite a bit faded.
    I did the workflow manually with photoshop, but then the photos look normal!
    I list the workflow as follows:
    1. get selected finder items
    2. open
    3. add graphic watermark
    4. scale image (750 px, 72ppi)
    5. render (save as jpeg)
    Hope somebody can help me.
    Thanks.
    lj

    Hi!
    Hope somebody can help me, cause I couldn't find this problem in the forum yet.
    I'm using Automator mostly for resizing my photos and to add a watermark. But after the workflow is finished the colors are always quite a bit faded.
    I did the workflow manually with photoshop, but then the photos look normal!
    I list the workflow as follows:
    1. get selected finder items
    2. open
    3. add graphic watermark
    4. scale image (750 px, 72ppi)
    5. render (save as jpeg)
    Hope somebody can help me.
    Thanks.
    lj

  • My RGB colors are turning to cmyk while bringing image from illustrator or photoshop. Why?  Removing the image from that page bright RGB colors are back.. hmm

    My RGB colors are turning to cmyk while bringing image from illustrator or photoshop. Why? 
    Removing the image from that page bright RGB colors are back.. hmm

    Edit > Transparency Blend Space > Document RGB

  • When i print out a color photo the colors are not accurate

    I have a new envy110 series CQ811A. I have a windows 7 64-bit laptop. There are no error messages and the Envy works great but when i print a picture off of a web site the colors are not accurate and i mean none of them. i have returned one printer already but this one is doing the same thing. i really like this printer but if it won't print the colors correctly  i don't know what i will do. I also have a HP C4280 All In One Photo Smart and whatever is printed off the colors are great it just is not wireless. I have tried everything and nothing helps. Is there a solution

    Hi easyneez5!
       Sorry to hear it's not printing web pages so well.
     I do have a suggestion, that may or may not align with the way your are used to printing web pages; HP has a new and improved application for printing web page content; HP Smart Print.
       It's supported on IE (most versions) and can do some neat tricks: http://www8.hp.com/us/en/partner/microsoft/bing-bar-for-hp/smart-print.html
      There are also other potential 'tweaks' you can try in the [Printing Preferences] / [Advanced]: Image Color Managment; You might try setting it from 'ICM Handled by Host System' (default) to 'ICM Handled by Printer' or even 'ICM Disabled'.
       Again, this is merely a potential way to check to see if this helps get those colors right; and remember your settings before you change them.
      Hope this helps
    Regards,
    HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
    How to Give Kudos | How to mark as Solved

  • Problem setting variables after initial page load

    So, I'm pretty new to ColdFusion and hoping this is an easy fix.  I have a .cfm page that opens from several different points in a website.  Depen
    ding on which point it opens from, the variables room and activebutton are assigned different values via an onclick event.  Based on these values, the room variable sets a background image for a div and the activebutton sets the textcolor for a different div via a stylesheet in the head of the document.  Now, this part works fine with the following code in the stylesheet in the documents head:
    #fp_r1_c2 {
    background-image:url('images/<cfoutput>#room#</cfoutput>');
    width:599px;
    height:577px;
    float:left;
    #<cfoutput>#activebutton#</cfoutput>
    color:#FFF;
    Heres where things get hairy.  After I have those initial variables set there are 6 divs (the ones that activebutton changes the color attribute of) that the user can click on.  When any div is clicked its color should set to #FFF and whatever div was previously selected should change back to the default color for the page.  In addition, the background-image attribute of the other div that was set by the room variable must change to a new image that corresponds to each button.
    I've tried several methods, most of which I probably messed up anyhow.  But I'm completely stumped how to accomplish this.  Researching online has shown me that I can't include the new values in any kind of onclick command...so how exactly should I go about accomplishing what I need done?
    Tthanks in advance for any assistance!

    You need to understand the underlying premise that ColdFusion is a "server-side" language. Once the page is generated and sent to the client as HTML, everything is in the hands of the client until the next request back to the server. So, if you want to do much in between server calls, a client-side tool such as JavaScript is the answer.

  • When printing photos at my hp 1514n the colors are odd + not suitable. using win7 64bit +lat. driver

    Hi, I' using a hp 1514n for printing photos. It's attached to my Win7 64bit computer. But the colors are not suitable. Printing is in high quality but the coloras are wrong (i.e. instead of a bule sky I get it  turquois).
    all patches installaed and also the lastest drivers. What else can I do?
    The files are ok, because I get the right colors when printign the files at another hp color laser jet with win7 (32 bit)
    Where can I get a suitable icc file?

    I'd use the GutenPrint drivers. They're usually better than the drivers that HP ships, anyway, and the latest version of GutenPrint will work with Leopard while the HP drivers for a printer that old will not. The drivers at <http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs> also explicitly support the DJ960C. Those drivers are usually written by HP employees, are often superior to the drivers HP uses, and, like the GutenPrint drivers, are free.

  • Any Searches at any Search site if I dont CLICK a site within (2) seconds all these pages load up that has nothing to do whith my friggin search in the 1st place how do I fix this ?

    Any Searches at any Search site if I dont CLICK a site within (2) seconds all these pages load up that has nothing to do whith my friggin search in the 1st place how do I fix this ?

    Thanks for the quick advice!
    Unfortunately, I am still unable to open my core productivity apps, namely Skype and Evernote. Twitter, as well, could not start. But interesting quick fix though, I never knew you could do that.
    Here's the error log after the restart:
    What else should I try?

  • Color space-creating a book in My publisher-.when I look at the share book pre print the colors are all dulled out. I work in pro photo rgb in LR and PS -.My Pub is sRGB-.where is the problem?

    Color space…creating a book in My publisher….when I look at the share book pre print the colors are all dulled out. I work in pro photo rgb in LR and PS ….My Pub is sRGB….where is the problem?

    I finally got to my references. This had to do with "soft proofing" on screen in Photoshop.
    So this may not help you at all. Re: Strange sRGB soft-proofing behavior  So go ahead and leave that setting at Basic.
    However there is a Color Management forum that you also go to and see if anyone has answers for your particular problem.
    Here is the link: Color management
    I hope they can help you out.
    Gene

  • The colors are not true when i print and my sd card will not fit printer

    The printer is hp7515 and the color of trees are blue and the water is purple,
    i can not get my SD card to fit into printer

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My ipads screen is shakey and the colors are messed up

    my ipads screen is shakey and the colors are messed up

    If the device screen looks inverted, try triple tapping your home button.  OR, you could tap settings, general, accessibility, and make sure invert colors is off.  Not sure what you mean about the screen being shaky, unless you tapped too long on the screen, and the icons are wiggling.  In which case tapping the home button will resolve that as well.

Maybe you are looking for