On my screen the image is clear and the colors are right, However when I print to either my epson of HP the image color is off.
On my Mac screen my photo image is clear and the color are right, however when I print to either my epson 2200 or my HP printer bother the colors are off and the image is not as clear as on the screen.
Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Similar Messages
-
I’m giving my ipad to my sister and I had the icloud account changed. I have added new ID and deleted the old one. However when updating and downloading apps, it still asks for password to the previous account. Does anyone know how to fix this? Thanks very much!
Maybe you should set it up as new device again:
How to back up your data and set up as a new device
Apps are tied to the Apple ID they were bought with and can not be shared with other devices that have a different Apple ID. -
When I send an imessage on my ipad to someone, my husband also gets the message, even though he was not selected as a receipient. This just started when I got my ipad and sent a message for the first time. As a side note, my daughter received an itouch and both my husband and i were getting all messages she sent, no matter which one of us they were sent to. I turned her imessage off. We have all of our devices under the same itunes account so that we can share all music and apps. How can we get around this? I do not want him receiving all imessages that I send, this will get very annoying to him.
You can have a separate AppleID only for iMessage and keep using the other one for iTunes.
Just change the AppleID used for iMessage in Settings > Messages > Receive At -
The colors are not true when i print and my sd card will not fit printer
The printer is hp7515 and the color of trees are blue and the water is purple,
i can not get my SD card to fit into printerHi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
how do i get itunes to recognize the phone so I can restore it to original settings?
Put it in Recovery Mode. See http://support.apple.com/kb/HT1808
-
While updating my MacBook Pro to the newest software, it froze with a grayish screen with a Apple logo and a frozen pinwheel right below it. What can I do to finish updating or to fix this problem?
We can't help you if you don't even know what you are installing. Never install anything if you do not know what it is. Installings through Software Update always have explanations which you should be reading to see if you actually need and/or want them.
That being said, it appears you attempted to upgrade to Mavarick. Although I am not positive.
Sorry, I am going to back out of this because I nor you know what it was you installed. Hopefully, someone else will chime in here.
GOOD LUCK! -
my iphone wont turn on. the screen is just barely lit and has a greyish appearance; plus when i plug in my iphone to my macbook pro it doesnt show up in my itunes. what do i do?
http://support.apple.com/kb/ht1808
-
I had all photos on a Windows desktop. Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive. When I go to import them into LR on the mac, they are all locked. Help, please!
"I plugged the external into the Mac and moved a folder of images onto the desktop. It looks like it went from read only to not locked. Is this possible?"
Yes, that's exactly what happened. If you buy another drive, you could copy from your existing drive to the new and your files will be read/write. The new drive will have to be formatted as an HFS drive (that's the Mac's format). If you need to format it, you use Disk Utility which is in the Utilities folder on your Mac. Be careful with that -- it wipes out whatever is currently on the drive. Make sure you format the right drive.
I keep all my images on an external drive, too. In fact, I have two matching drives and sync them so I always have a backup. -
Ipod Touch home screen has shifted up. Cannot see the top row of apps. The music, mail, safari and videos icons are transparent with black bar underneath them. Anyone know how to fix this. The lock screen and apps are normal size.
Click you home button, your are in multitasking mode.
-
I previously uploaded images onto my desktop to work on in Lightroom 5.2. I worked on a few of the images days ago and just now getting back to them. My problem is I can only access the images I previously worked on and all the rest it says images not available but all the images are still right on my desktop.
... and all the rest it says images not available
Normally this happens because you moved, renamed or deleted these photos (or the folders that contain them) outside of Lightroom. This is how to fix the problem: Adobe Lightroom - Find moved or missing files and folders -
Sometimes when I open a link in a new tab and then switch to the tab, the address bar clears and I'll have to re open the tab and hope that doesn't happen again. Sometimes this happens again and again. Most of the times if I just open the link in a new tab and don't switch to it, this won't happen. But as I switch too the tab, the text would disappear and the link wouldn't open.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows) -
My 27" iMAC is less than 3 month old. Many times regardless of what application I am in the screen will start shifting back and forth left to right. Then I can't do anything until the screen stabilizes. This takes anywhere from 5 to 25 secs. Any ideas?
why don't you take advantage of the free 90 days of AppleCare and utilize the free, professional telephone support from Apple instead of asking in the forums?
-
I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
Community,
I have a problem with my iphone 4. Every few months my battery starts draining within a few hours. I have tried all kinds of battery saving tips, but they don't help. When i go to the settings/general/usage is can see that the time for Usage and Stand-by are the same, so my phone is fully on all the time this explains the draining. But in reallity i turn my phone to stand-by most of the time, i mean the screen is black and all???
The first and second time a had this problem, both a few months a part, i restored my phone and it was solved. This time i restored my phone but this did not help!! And restoring my phone every two months is not my preferd way of solving this problem.
Does anybody have an idea on how to solve this problem? can anybody help me?
best regards,
MerijnRestoring is the answer. It sounds as if there is a rogue process constantly draining your battery.
The issue you face is that, if you restore your backup thereafter, you risk the problem coming straight back with your files.
Store your files individually and it is time to start fresh. -
I used Match, and now there are artists missing when I search by artist, yet they are in my library when I search by song. If they are in many song list, why aren't they in my artist list? Also I can't sort my songs list by artist on iPhone, so their music is basically lost in space....help
It's not clear from your post, but you do realise
that if you import a cd as a compilation, it will not
appear under artists? This is done to save the iPod
being cluttered up with single artists entries who
might have only one song listed.
I wasn't aware of that. It's true that I haven't been using the "compilation" tag for a long time. I've only started using it with iTunes 7 as otherwise with Coverflow I would have one album cover for each artist in a compilation. Before that my compilations weren't tagged as such as that is quite probably why each artist from compilations showed up when browsing by artists.
Message was edited by: Didou
Maybe you are looking for
-
Links in Pages document to open other files in same folder
Hi, In Microsoft Word on my PC I can put links in a Word doc to photos, PDFs and other files that sit in the same folder as the Word doc. Can I do the same in Pages on my Mac, and if so how please? I'm using Pages 5.2 in Mavericks. Thanks, Neil
-
The people at FiOS say my h.264 QT file needs to be 6 MB Bit Rate, but I can't seem to get higher than 3 MB. They have to sample it up which makes my graphics slightly soft. Can I get a higher rate using Compressor and h.264? I'm past deadline and do
-
Reducing the amount of code in htm pages :-)
Hi, I recently had to reduce the amount of abap business logic in a view. The view was in a large multifunctional bsp that someone else had written, and to which I needed to add some code. That view consisted of many htm includes, each include having
-
Premiere & Media Encoder only using all cores of only 1 CPU
After following the recommendation of the Adobe White Paper on Premiere and Media Encoder I purchased a dual Xeon machine. It has dual 2699 v3 processors each with 18 physical cores. Both Premiere and Media encoder will max out 36 cores (18 physical
-
Can anyone tell me why I cant see my table, images and forms in design view but i can in code view? I cant give you a link to the page though as I am between hosts at the moment.