After adjusting photo there is still a white border around the photo wo i cant teel is i fixed it.This works in cs6 and not in cc ?

Adobe Creative Cloud

Since you have not yet responded to the request for more specific information, I will make a few assumptions: I guess you made a selection of an object on a white background and when you put that selected object on a separate layer (Cmd+J) it had an undesired fringe of white. If that is indeed the problem, three possible solutions are:
1. Go to the layer, do not make a selection. Choose Layer > Matting > Defringe
2. Go to the layer, select the object and choose to Select > Refine Edge > Shift Edge or other tools there
3. Go to the layer, select the object and choose Select > Modify > Contract to create a tighter selection. Then inverse and delete the fringe
There are other options, as well.
The choice of which of the above three might produce the most desired effect depends on the particular object and selection.
Good luck.

Similar Messages

White Border around the screen? 1/2 inch...

I have a white border around the screen, very noticable with any dark background...
Whats the deal with this?
Could this cause the display brightness to have to be turned up all the way just to get a good solid picture...?
This is not acceptable?

The lack of information, feedback, confirmation, etc that apple is famous for is exactly why I am deathly afraid of ordering the new 17" mbp. I have been stealing my girlfriends' peecee to catch up on emails and websites since I sold my old 15" mbp a couple months ago.
I was just about to pull the trigger and buy the new 17" mbp until the "delay", again no specific information given out by apple. Some people were charged secondary charges and had ship dates of the day of the announcement of the delay - which would logically dictate that there were plenty of machines that had to be un-packed, cracked open and "updated". So with all the unibody related issues, all the 9600 related issues, and all the screen issues of the 15" led, I am not sure i'll be able to play guinea pig for apple... yet again...
Weejun wrote:
If this problem is fixed at all, I'll bet it won't be until a new lot of displays is made, either by a new >manufacturer or (more likely) under more stringent standards by the same manufacturer(s). I've >heard that display sources have become very limited, and suspect that Apple has had to settle for >lower quality than they would prefer. Maybe Apple can only handle complaints as they arise >because there aren't enough decent replacements. But a barrage of complaints might force it to >demand better quality from its contractors next time.
Bottom line, I'm hoping for a C86 or C87 to show up. Maybe that's hoping for too much.

Removing a white border around the Extension I'm building

Hi,
I have a CS Extension that I'm building, and while working on the UI I have noticed that there is a white line all around the extension, which I cannot get rid of. I've attached a screenshot showing an example of this white border.
See under the PUBLISH button is this white border. I have set the height and width in the Application tag of my app to 100%, but this does not remove the border. Does anyone know what the problem could be and how to get rid of it?
Stephen

Yes. There's a couple of pixels arounf the swf that you can't do much about.
Make the background color of your extension match the color of the panel, and noone will notice...
Harbs

White border around the picture when it prints

How do i get the white border off of my picture when i print my picture?

As mentioned above by hatstead tat all printers does not support border less printing so first of all check whether your printer is able to print border less. If yes then there are few steps to follow for MAC and WIN machines.
For WIN :-
Click on ‘Change settings…’ button and then by clicking on ‘Advance Settings…’ you will get your printer preferences dialog.
From printer preferences dialog you can check/select the checkbox/radio button for border less printing. This option is generally present under different tab for different printers like “Page setup tab for Canon Printers” or “Paper/Quality tab for HP printers” or “Main tab for EPSON printers”.
Once done and from PSE print dialog select appropriate paper and print size and click ‘Print’ button to get the border less print.
For MAC:-
f your printer supports borderless printing then you can find the entry for paper size with border less from ‘Select Paper Size’ drop down on print dialog.
Now select your print size from ‘Select Print Size’ drop down and click Print button to get the border less print.
Hope it would help you.
Cheers !!!

I just got a 64 bit new coomputer and use FirFox always. My home page Yahoo an dYahoo email work fine and fill the page but all other websites there is a 3-4' border around the words. What can cause that the 64 bit instead of 32 bit?

I have tried everything I know in Windows 7 and your suggestions but nothing changes the look of each page. Only about half the page is being used for words and the rest is empty space. As I said my Yahoo and Yahoo email fill the page but nothing else does. Looks like words in a wide picture frame. This is Windows 7....64 bit...4GB memory and 1TB hard drive and Intel 3 chip

Let me also copy and repeat -- since the developers' club apparently has chosen to not give it any weight or credibility -- a comment by a completely different user, in a different thread:
"I am using the 64-bit nightly, and it is FAR faster than any release in 32-bit, and I have 2GB of ram. Usually the addon compatibility thing takes minutes, when with the nightly 64-bit, I was done in a matter of seconds. also, I notice that it is faster, pages load faster, there is less lag, and it all around seems better than 32-bit in every aspect, even though it is just automatically compiled and not tweaked."
So, the developer's club position remains, "there really isn't much need for a 64-bit version", despite comments like that. Hmmm . . .
Are you SURE you want to stand directly behind that answer, while people shoot at it?

Can't get rid of white border around image

http://www.gunnar.ca/laminatepage2.htm
I created a rounded corner in photoshop for my table. I
created a cell in the bottom left corner of the table and placed
the gif. There is a thin whit border around the outer edge of the
gif, so it doesn't look genuinely rounded. Can anyone tell me how
to get rid of that so it looks like the table is actually rounded?
Thank you!

Because the table containing the GIF has a border. In your
styleA.css
stylesheet, the rule:
.border {
border: 1px solid #E5E5E5;
adds a border to the table. Delete the rule. Of course - that
may affect
other things that use the .border class. Or - delete the
class from the
table tag.
Several problems with the page:
styles.css cannot be found
sideNavStyles.css cannot be found
34 vaildation errors:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.gunnar.ca%2Flaminatepage2.htm
Alec
Adobe Community Expert

White border around screen after iOS update

Hi all
I just updated my ipad 3 to the latest version of ios and now i have a faded white border around the whole edge of the screen with the corners being rounded?! I have turned the device on and off and its still there?!? Has anyone else had this problem?!?

I agree with Nickshred. There just appears to be a small blank area all the way around the border now. I would say maybe 1mm area where the screen is no longer stretched all the way to the edges. I am positive it wasn't there before I updated, I would have definately have noticed it. It is really noticable when you are viewing the phone in direct light. When the sun is reflecting off the of phone, you can actually see the main screen is a black background with the icons on top of the black background. Then there is this small one millimeter edge all the way around that basically looks like the color of my LCD monitor when it is powered off. It is now just an unused portion of the screen. I keep wanting to stretch it or adjust it back to the edge.

Problem with white border around images

Hey guys,
I'm new to the creative suite and have just finished running through all of the video tutorials, etc. I'm having a small problem which can be seen in the sample site I'm fooling around with here:
http://www.andrewedunn.com/gsd/
I'd like to get rid of the small white border around the "GS" logo. It is an illustrator document.
Basically I put the letters in place, converted them to paths (so I can resize it) and dropped it in my GoLive document as a smart object.
A google such suggested rasterizing, but I couldn't get it to work after fooling with it a little bit.
Further, if I wanted to add a drop shadow to it, how can I do it so that it is transparent on top of the background images in golive? The one time I tried it, the drop shadow was placed on top of a white background.
Any suggestions would be appreciated!

Are your background images always going to be displayed left-aligned on a black background and always the same size, so that the left half of the logo will always be over the photo and the right half will always be over the black? Or will the size or placement of the photos vary?
Are all of the photographs in approximately the same moderate tonal range, or will some be bright and some dark?
If the background will be consistently as you show it, you should be able to anti-alias your logo against a medium gray on the left and black on the right for acceptable results. If the background is more varied, you are not going to get good results with either GIF or JPG format.
See this related thread:
http://www.adobeforums.com/cgi-bin/webx/.3bc38b6e/3
> Further, if I wanted to add a drop shadow to it, how can I do it so that it is transparent on top of the background images in golive?
Only by exporting as a transparent PNG, but then older browers won't display it properly.
If you are really needing to have a logo that casts transparent drop shadows on top of a wide variety of images, you might consider going the Flash route, even though you aren't planning animation. Flash has very good transparency handling, and there are Flash player plugins that are compatible with browsers that won't display PNG images.

White Border Around Template Images

I recently created a "page layout" document from a template. This is my first attempt to use a template and it was all going well. Until I hit "print." When I print the document, the images that were already part of the template are printing with a white border around them. It looks fine in Pages and when I go to Print Preview, but it comes off the printer looking funny. What's the deal?

Thanks for the clarification. I had a hard time selecting that white border around the photos. I couldn't even figure out what it was for awhile. I think the printing problem is related to that white border which is an image, photoBG_triple.png, that is behind the photos & their masks & on top of the lined paper image, notepaper.png. I think all that layering looks nice on screen or PDF, but could be a printing nightmare. How does it look funny? And what kind of printer are you using?

I have an iPhone 5 and just recently when I get the camera button and it opens there is a black border around the screen and the screen is small and I don't know what I did to cause it or what to do to make it go away anyone help

I have an iPhone 5 and just recently when I opened the camera there is a big black border around the screen causing the picture itself frame to be smaller I don't know what I did to cause this or what I can do to make it go away can anyone help/

First off, try a reset of the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, see if the problem persists.

How can I create a white border around figures that are in an image? (CS 6; examples+image included)

Hi,
I have CS6 and am wondering how to create a white ("comic style"?) border around figures in an image, as in the examples below. I don't wish to include the black shadow of the border, just the white part.
Examples:
Here's the image I'd like to alter, making a white border around the outline of all five figures:
I researched for quite a while but could find no instructions. It would be very much appreciated if someone knows and would be kind enough to share the technique! Thank you.

If you make the image a layer (opposed to Background)...
You could Select the blue with the Magic Wand as Semaphoric says, then fill with white. Then choose Select - Modify Selection - Contract, and mask or delete the remaining pixels. The Contract operation will give you a nice border the size you choose.
For extra credit, you could use Refine Edge to make the selection more accurate.
Click to see the image against a dark background.
-Noel

In pages/Pixelmator how do you put a white border around a piece of font, to make it stand out more. Please Help

The Benchwarmers logo, I would like to have a white border around the font to make it stand out. Help please

You would be better served to take a closer look at BeLight's free Art Text 2 Lite, or on YouTube, search for "Pixelmator text effects," or review the several Pixelmator tutorials on their site. Pages does not support the layered text effects necessary to create the Benchwarmers logo, but certainly can incorporate this image once completed through external means. Is the following image the one you have in mind:

White Border Around Flash in Dreamweaver

When I insert my Flash file (.swf) into my Dreamweaver page,
Dreamweaver inserts a thin white border around the flash video. I
have tried several potential solutions I have seen but none of them
seem to solve the problem. Looking for suggestions!

Which browser ?
"CreateGood" <[email protected]> wrote in
message
news:fvn8uh$mj2$[email protected]..
> When I insert my Flash file (.swf) into my Dreamweaver
page, Dreamweaver
> inserts a thin white border around the flash video. I
have tried several
> potential solutions I have seen but none of them seem to
solve the
> problem.
> Looking for suggestions!
>

Have placed video-when previewed there are sometimes heavy black lines around the image. If I place white rectangles in front, the black is hidden in Author, but when I preview the black lines are still there..How to use white rectangles to mask edges?

I have placed video - when previewed there are sometimes heavy black lines around the image.
If I place white rectangles in front, the black is hidden in Author, but when I preview the black lines are still there..
How to use white rectangles to mask edges?

Here's view in IBA you can see bounding boxes of white rectangles that
form frame to block out black setions..
Here's iBook preview image of same page, NO WHITE FRAME!
WHY?
BOB SPRAGUE

Getting rid of white border around photos when using iphoto to iweb

Hi there,
Am creating web pages in iweb and importing photos from iphoto. Can anyone tell me how to get rid of the white border around my photos (image frame)? Hoping to enhance some of the templates with my own images. I also have photoshop elements and have been having the same problem there. Sure appreciate. Kim Strouble

Welcome to the Apple Discussions. The link to the site is broken. There is a fix for some of the strange goings on since the MobileMe conversion. See Wyodor's post in this thread: http://discussions.apple.com/thread.jspa?threadID=1605665&tstart=0. After applying the fix to iWeb I found I might have to republish a second time, occasionally a third and make sure I cleared my browser's cache.
If you're using Firefox 3 that's a different solution that can be found here: http://discussions.apple.com/message.jspa?messageID=7486799#7486799
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

After adjusting photo there is still a white border around the photo wo i cant teel is i fixed it.This works in cs6 and not in cc ?

Similar Messages

Maybe you are looking for