After bundle can I release the request?

1)I have more than 2000 transport requests.Can I bundle the requests and release after.Is it possible to release after bundle the request?
2)I am going to upgrade my system from ECC5 to ECC6.for that I should release all the request or no need?

Hello TJK,
You can merge all the requests in one single request and release that single request. For this create a workbench request in SE01. Select the request and then do CTRL+F11. A pop up will come. Use option obhect list from mutiple requests.
In the next screen give the transport numbers. Select all check boxes in request status. Also for request type select all the options.
Now execute this in background.
However if you do it through standard background option in SE01 the release may still fail.
In that case you need to check OSS note 89466. You may have to create a custom report for that.
With regards to your second question I will say yes please release transports. In case you have made changes to any standard SAP object like report or table definition and the object is locked in a transport the upgrade will stop.
So make sure there are no locked standard SAP objects in transports at the time of upgrade.
Please award points accordingly.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu
Message was edited by:
Ruchit Khushu

Similar Messages

Can we delete the request after the Compression?

Hi All,
Can any body tell me, Can we Delete the Request after Compression?
Thanks In Advance
Regards,
Kiran Telkar

Hi
You can delete data by request id even after compression.
Steps:
1. Goto Monitor screen and select the particular request.
2. Click on the icon request reverse posting.
It will make the values of the key figure as "0" of that particular request. This is the way you can delete the contents by request id.
You can also do selective deletion and you will find this option in the manage screen of the data target under the tab contents.
Hope it works.
Assign points if it is usefull.
Regards
Saddy

How can we delete the request after compression? is it possible ?if so how?

how can we delete the request after compression? is it possible ?if so how?

Hi,
You basically have 3 options:
1. Use selective deletion and delete the error records.
2. Do reverse posting and negate the error records.
3. This is my preference. Delete all the data from the cube. RSA1 -> cube -> right click -> delete data -> choose "fact and dim" from pop-up. Now reconstruct all the requests that you need i.e ignore the error request. But before all this make sure you have the PSAs for all the request.
Bye
Dinesh

Problem while releasing the request

I created a customized Z report from the existing standard SAP report and also created a new tcode into the development server, and released the request via se09 into quality server. Now when I try to execute this tcode in the quality server, its giving me a error message 'status STANDARD of the user interface ZRM06ENDR_ALV missing'. Due to which its not displaying various push buttons like 'print preview' 'messages' etc. However its working fine in the dev server

You should creat GUI status. You can copy it from another report by clicking right on the gui status from which you copy. Then specify the target report. Then in your Z report activate the gui status. Also write the code below:
form alv_menu using rt_extab type slis_t_extab.
set pf-status 'STANDARD_FULLSCREEN'. " Write here your gui status' name .
endform.
In call function reuse_alv_grid_display set i_callback_pf_status_set parameter as 'ALV_MENU'.

Can we release the requisition twice in E-recruitment?

Hi,
The Restricted Recruiter has released the requisition and waiting for the approval.
From the below status history...
Date            |    Time    |   Name                                             |    Status        |     Status Reason
13.08.2009   |   09.03   |   David                                             |    Draft          |
18.08.2009   |   16:31   |   Workflow Performance Manager |   Released    |      New Position
18.08.2009   |   16:34   |   David                                             |    Draft          |
We can see that the first time 13.08.2009 09:03 the Requisition was in Draft and then it was released and sent to the approver;
Then the approver has approved the requisition on 18.08.2009 16.31 and again the recruiter has changed some details and
we can see it in draft status as on 18.08.2009 16:34 after this he has released the requisition
Which is yet to be approved.
Now it is not allowing to edit the requisition status? why does this happen?
There is one more thing complicating the approval process - the approval goes only to the Lead Recruiter who is a Lead recruiter at the moment when the requisition is being released. If we add another lead recruiter/update the current lead recruiter in the requisition, the new person will not see the requisition for approval.
It might be due to the workflow being triggered once and not again when the support team is updated.
Please let me know if there is any way how to trigger the workflow again (even from the backend) to avoid these two situations.
Thanks and Regards,
Rashmi
Edited by: Rashmi G P on Aug 28, 2009 2:35 PM

Hi Rashmi,
the first íssue is a question of process design. Some customers say that every change has to be approved others say that if the requisition was approved once it should be done even if someone makes minor changes afterwards. Of you do not want to run the approval process again and again you can build a workflow which auto approves the requisition if it has been in status released at least once. I have done this for a customer and it worked fine.
The issue for who sees a workitem for approval is due to the general princible of direct person assignment of tasks in e-recruitng. So the approval is only send to one user. A dialog workitem has always a group of peaple who are allowed to process the task, a group which is assigned to process the task, a number of people who are responsible for the task (all people who are allowed and assigned) and in the end one who is actuall processing it.In standard the assigned user should be the lead recruiter while you need all lead recruiters. this should be developable for a wf developer.
Kind regards
Roman

Is it possible to release the request from production to quality

is it possible to release the request from production to quality

It's not allowed..
You can move request from original server ( where a request is created ) to target server.
Since in production server you are not allowed development work.. so u can not create req there... and u can not move req of dev server ( which were moved to prod ) from prod to quality.
Reward if helpful
Regards
Pradeep

How can i change the request description?

how can i change the request description? in BI 7
Regards
Kiran

hi Kiran,
If u mean transport request; u can change it if u have not released the request.
go to se10.Double click on ur request. u will get the change icon in that page-> click on that. goto properties tab- there u will be able to change the short description.
hope it helps.
Regards,
Rathy

Reg releasing the request

Hi All,
cud anybody tel me regarding how to release a request?? and how can we know that for a particular object request is released or not?? how??
regards
abc xyz

Hi
Go to SE09 or SE10 tcode
select the request to be released
First release the Tasks under that request
then release the request
then use the STMS or take the help of a basis person to Import he same in the required client
check the tables E071 and E070 for further details regarding the request
Reward points for useful Answers
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Problem in Releasing the Request

Hello,
I am trying to release the request which is targetting to one of the available system (say QAS)
When clicking the release button, I am getting the error message as below :
=========
Test call of transport control program (tp) ended with return code 0232
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK EBDK900238 pf=
ECCECB\sapmnt\trans\bin\TP_DOMAIN_EBD.PFL -Dtransdir=
EC"
which checks the export requirements, returned the following information:
Return code from tp: 0232
Error text from tp: ERROR: Connect to EBD failed (20081202235756, prob
System Response
Further processing is terminated.
==============
Any idea how do we overcome this?
Thanks

hi,
I have the same issue long back.
It is purely Basis issue just tell them the problem and they will solve it.

Can we release the standard price for a material whose Price control is "V"

Hi experts,
Could you please clarify my doubt that can we release the standard cost of a material whose price control is "V".
Our user is trying to release the std price. But its not getting released. If the material is of ML relevant I could have checked in CKM3 for any actual data existancy. I am aware that if any actual data existing the price could not be released.
But here this material belongs to a Non Material ledger relevant plant. So I cheked the stock overview and for any material documents if any. But this material has no stock.
I m confused how to check the material's transactions with FI entries.
Please help in this regard.
Thanks,
Sarat.

HI Sarat
1. You can release a std cost for material with V, but that wont serve any purpose.. The inventory valuation will happen at V alone
Either the material should have a BOM or Routing to release the std cost and MRP view shall have Proc Type as E / X
OR
You can have special proc in costing view as 20 and then execute CK11N for the material....
Some price must be there in material master which will get released as std cost (based on your valuation variant)
2. You can check material transaction using MB51
Regards
Ajay M

How can we release the locked objects..

Hi,
I have created some objects such as pages and iviews in the portal. If i edited any of the object, then when next time when i access the object, I am hgetting a message as object is locked by admin, you canot edit it. Infact, I have logged in as admin.
How can we release the lock of objects?
Your help and suggestins solicited...
Best regards,
Sudhesh...

Login as the Portal Administrator.
Go to System Administration > Monitoring ->Detailed navigation -> Object Locking
Here you can find all the objects that are in locked state.
Now to unlock, tick mark the object that you want to work with & click on the "Unlock" Button.

When I try to open my project, where can I find the requested file 00000.mts2?

When I try to open my project, I am asked where to find file 00000.mts2?
I see almost all scenes in my project in color red with the text 'media off-line'. But it is impossible to find this requested file 00000.mts2 on my computer. What can I do to solve this problem?
Thank you for your answer.
Hans

Thank you. I have done what you told me. It was a long search, but at the end I was succesful. Again: thank you for your useful answer.
Greetings,
Hans
Verstuurd vanaf mijn iPad
Op 26 feb. 2015 om 00:29 heeft Peru Bob <[email protected]> het volgende geschreven:
When I try to open my project, where can I find the requested file 00000.mts2?
created by Peru Bob in Photoshop Elements - View the full discussion
This is the Photoshop Elements forum. Are you using Premiere Elements? If so, ask here:
Premiere Elements
By the way, if you moved your media files or they are on an external drive, you will have to relink them.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7230757#7230757 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7230757#7230757
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can I know the request is come from the link in header in the filter?

I am using the tile for layout management and each page has a header, menu, and content body. I want to do something at the filter If the request is come from the commandlinks in the header and menu.
How can I know the request is come from the link in header in the filter?

Basically all you have to go on is the request data. Examine the encode/decode requirements for commandLink; you may be able to determine from the request attributes which commandLink has been invoked.

Upgraded to lion, can not release the mouse/the icon is following

upgraded to lion,but can not release the mouse/tablet/touchpad when click and drag(the icon turns translucent and following the arrow,doesn't want to release)
I can do nothing with this laptop. the support from Apple has no idea on this in China
have to reinstall all the system from 10.5.
so sad!
Who can help?

SOLVED:
I was reading a post about a similar problem and discovered a free program called TinkerTool. I downloaded it and under the Finder tab was able to check a feature called show all hidden files or something. Once I did this all files on my backup drive were visible but some were greyed out.
I unchecked this feature and closed TinkerTools then restarted OS X Lion. Everything is back to normal and I can again see and manipulate the files on my backup drive. I'm all set, maybe reading this will help someone else.

Can I change the request params in my backing bean?

I want to change the request params in the backing bean method.
For example:
<h:commandLink value="test" action"myBean.test">
<f:param name="a" value="1" />
</h:commandLink>
When user click the link, myBean.test() will be invoked.
Can I change the request param values in myBean.test()?
I mean, if I can change the value of "a" to "2" or add a new param?
Thanks!

I'm not sure if You can change any request parameters...
You can set e.g. a request attribute in the case that You get the request object from the faces context and set the attribute.
something like this...
FacesContext fc = FacesContext.getCurrentInstance();
HttpServletRequest req = HttpServletRequest)fc.getExternalContext().getRequest();
req.getParameter("id");
req.setAttribute("id", new Integer(2));

After bundle can I release the request?

Similar Messages

Maybe you are looking for