After CC packager created installer for Lightroom, Installer does not install

I created an installer for Lightroom (windows) using the CC packager. When I tested it it did not install Lightroom. I tried the 32bit version and the 64bit version and they both did the samething. Is there a problem with creating the Lightroom installer?

Far out, I have been suffering from the same issue! I have tried on multiple machines to install Lightroom CCP pacakge! When running the setup.exe for other packages it will actually install the application and display a desktop icon / program files entry. I have wasted hours trying to figure out why Lightroom wasn't installing even tho event logs said successful! How is there no official documentation from Adobe that this is the expected behaviour for Lightroom manual installs?
Sure the documentation says run setup.exe then exceptions installer, my thoughts were why bother with exception installer if the main package has not installed correctly! It should mention the program won't appear until exceptions have been installed?
Thanks for creating this thread DeltaCollege! And thanks for the resolution Romsinha!

Similar Messages

Javascript to create bookmark for page that does not exist yet

Hello all,
Is there a way to write js for a bookmark that goes to a page that does not currently exist?
For example, I have a 20 page pdf document. We have FileMaker Pro that can 'append' to a PDF additional pages. So when FileMaker pro appends two new pages (bringing us up to 22 pages), I'd like to have 2 'existing' bookmarks in the original 20 page pdf document that will, when clicked, go to page 21 and 22 respectfully.
Is this possible and would anyone have the JS I would put into that bookmark?
Thank you in advance!!

Here's what I posted in the other forum you posted this to, in case it might help someone here:
The JavaScript would be:
// Go to page 21
pageNum = 20;
If there are fewer than 21 pages, it will go to the last page. If you want to avoid this, you could do something like:
// Go to page 21 if there are at least 21 pages
if (numPages > 20) pageNum = 20;

Create wsdl for service tht does not have prefedined named resultsets

I am trying to create a wsdl for the GET_SCHEMA_VIEW_FRAGMENT service. I am not sure how to create the complex type for the response parameters. The name of the result set that comes back depends on the name of the view that is passed into the service. Below is an example of the response I get back. I resultset named "statesview" will change when I call the service for a different view. Any help would be greatly appreciated.
- <idc:resultset name="statesview" TotalRows="3">
- <idc:row>
<idc:field name="StateId">1</idc:field>
<idc:field name="State">Massachusetts</idc:field>
<idc:field name="Country">USA</idc:field>
<idc:field name="Display.default">Massachusetts</idc:field>
<idc:field name="Display.English-US">Massachusetts</idc:field>
</idc:row>
+ <idc:row>
<idc:field name="StateId">2</idc:field>
<idc:field name="State">Rhode Island</idc:field>
<idc:field name="Country">USA</idc:field>
<idc:field name="Display.default">Rhode Island</idc:field>
<idc:field name="Display.English-US">Rhode Island</idc:field>
</idc:row>
- <idc:row>
<idc:field name="StateId">3</idc:field>
<idc:field name="State">Texas</idc:field>
<idc:field name="Country">USA</idc:field>
<idc:field name="Display.default">Texas</idc:field>
<idc:field name="Display.English-US">Texas</idc:field>
</idc:row>
</idc:resultset>

it depends on the selection algorithm you have on the proxyservce
on the fourth tab you can dispatch based on soapaction/body/header/etc
you could dispatch on the soapaction and skip the body

Adobe Acrobat installer does not install...

downloaded the install file, ran it, the install screen (fuel gauge) never shows install progress, what's up with that?

[discussion moved to Acrobat Installation & Update Issues forum]

How to suspend the installation after downloading packages via ota for lollipop 5.0.1. on my Note 4. always asks me to install it on notification bar. thank you :)

How to suspend the installation after downloading packages via ota for lollipop 5.0.1. on my Note 4. always asks me to install it on notification bar. thank you

If you factory reset, it wont make the update go away, but you should back up and reset before you install the update.

J2EE ADDIn INSTALLATION DOES NOT MOVE AFTER ABAP UME STAGE

Hi,
I am installing java add-in for ABAP system for NW2004s SR2 system. I am able to complete SCS and DB instances. But during installation of CI at step u201CSAP system > ABAP UME u201Cafter
pressing u201CNext u201Cbutton the installation does not continue without any
warning or error message, It asks for SDM password and J2EE_ADMIN password, even after I give the password, the installation does not go forward. After pressing next it still comes to the same step.
I had done a proper un-install through SAPinst, cleaned up all the j2ee and SDM folders manually, changed the jdk version, etc and tried, but still the same issue.
I had created j2ee_admin, sapjsf, j2ee_guest users manually, cleared j2ee and SDM folders manually and tried to re-install but the same issue.
There are no error messages or logs given, but just the issue. Any help at the earliest would be appreciable.
The only error message I can read is as below:
INFO 2008-05-28 17:06:38
Creating file
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.jlaunch.
INFO 2008-05-28 17:06:38
Creating file
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
INFO 2008-05-28 17:06:39
Output of
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch
UserCheck.jlaunch com.sap.security.tools.UserCheck
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install
-c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a
checkBeforeCreate -u J2EE_ADMIN -r SAP_J2EE_ADMIN -message_file
UserCheck.message is written to the logfile
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
WARNING 2008-05-28 17:06:42
Execution of the command
"/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch
UserCheck.jlaunch com.sap.security.tools.UserCheck
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install
-c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a
checkBeforeCreate -u J2EE_ADMIN -r SAP_J2EE_ADMIN -message_file
UserCheck.message" finished with return code 254. Output:
INFO 2008-05-28 17:06:42
Removing file
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/dev_UserCheck.
System details
Kernel release: 95 64bit
Unicode: - NO
Operating system: SunOS 5.9 Generic_122300-08 sun4u sparc SUNW,Sun-Fire-15000
Thanks,
PK

Hi markus,
May be this additional information would help.
the sapinst_dev.log shows the following:
INFO       2008-05-30 13:37:38 [syuxcpath.cpp:351]
           CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.jlaunch.
INFO       2008-05-30 13:37:38 [syuxcpath.cpp:351]
           CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
TRACE      [syuxctask.cpp:1355]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 22550
INFO       2008-05-30 13:37:39
           CJSlibModule::writeInfo_impl()
Output of /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install -c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a checkBeforeCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message is written to the logfile /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
WARNING    2008-05-30 13:37:44
           CJSlibModule::writeWarning_impl()
Execution of the command "/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install -c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a checkBeforeCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message" finished with return code 254. Output:
INFO       2008-05-30 13:37:44 [syuxcfile.cpp:280]
           CSyFileImpl::remove()
Removing file /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/dev_UserCheck.
TRACE      [iaxxejsexp.cpp:199]
           EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.ume.generalError:
. For more details see output of logfile:
TRACE      [iaxxdlghnd.cpp:150]
           CDialogHandler::doHandleDoc()
Dialog validator of dialog : d_nw_ume_doublestack_passwords
called by :|NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Doublestack|ind|ind|ind|ind|1|0|askPasswords
returns false without any additional information.
Please inform the installation development.
TRACE      [iaxxgenimp.cpp:1155]
           showDialog()
waiting for an answer from gui
nzlsfn23:bd2adm 93%
Regards,
P. Kumaravel.

"Installer could not install some files in "/". Contact the software manufacturer for assistance."

What does THAT mean!!! Appears when trying to download the new Itunes!!!
Any ideas??
"Installer could not install some files in "/". Contact the software manufacturer for assistance." ?????????????????????

can someone please help!!! I can't install anything on my mac!!! And my iphone isnt even showing up in itunes when i plug it in!

AirPort Utility 5.6 for Mac OS X Lion The installer will not install because it states the OS is not supported. I have the latest

AirPort Utility 5.6 for Mac OS X Lion The installer will not install because it states the OS is not supported. I have the latest

Part of your message was not included. Can you re-post with details again please?

Lightroom 5 stopped working. Told to remove the program and re-installed. Creative cloud installation does not proceed to 0%. What is wrong? Using a PC.

Lightroom 5 stopped working. Told to remove the program and re-installed. Creative cloud installation does not proceed to 0%. What is wrong? Using a PC.

I installed the Creative Cloud again. Now it works.

When attempting to install "Software Update" from Apple, the process talls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.

When attempting to install "Software Update" from Apple, the process stalls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.

Thanks for the straightforward tip. I had restarted once already, but the second time was a charm. The install button now works. Don't know if it mattered, but I also repaired disk permissions and then restarted in safe mode this time.
The printer driver is apparently a different issue in itself. It turns out that the my printer, the HP Deskjet F380, has some fluke that makes it incompatible in 10.6. A new driver is coming out from HP according to Rickmeister in this thread: http://discussions.apple.com/thread.jspa?messageID=10076690&#10076690
In case anyone else has the same problem with the F380: Like the user in the aforementioned thread, I downloaded and installed the old HP drivers for 10.5, and now at least I can print in the meantime.

I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Photoshop Elements installation failed: Installer does not support install on a 64-bit operating system

Purchased Photoshop Elements 13 from Adobe through Amazon as a download. It said one of the requirements was a 64-bit operating system. Okay. Downloaded fine. I have a Dell Inspiron 15 with a 64-bit processor. Initialized Adobe installer, put in serial #, pressed install. Installation failed: error msg - Installer does not support installation on a 64-bit operating system. Please download the 64-bit version of Photoshop Elements. Help.

download the 64 bit installer
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Safari 3.1 The installer could not install some files in"/"

I attempted to download and install the latest Safari 3.1 and Security update on march 18, 2008.
After validation and subsequent re-start of the machine the following error message was displayed.
I attempted to download and install the latest Safari 3.1 and Security update on march 18, 2008.
After validation and subsequent re-start of the machine the following error message was displayed.
*_None of the checked updates could be installed. The installer could not install some files in"/"._*
*_Contact Software Manufacturer for assistance._*
After the iMac hung on the message and a "OFF button push reboot", I attempted to run Safari and the icon bounced once and the app did not run. "Safari Broken" couldn't surf the net.
I replaced the safari app file with an original 3.04 from a memory stick and rebooted and it ran the next time around.
Other attempts days later produced the same results. Safari Broken
Any method of correction? .

See discussion from Clearlake regarding Safari 3.1 failed installation...

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analy

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."

Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium

How to creat commitment for PO PR but not creat statistical cost for GR

Hi,
Quantities and Values in Valuated Project Stock: Example - Material - SAP Library
Planning
Material FIN-M is assigned to network activity V10 and is managed in the project stock for WBS element P/4711.1.
The network type is flagged as appended and apportioned to the WBS.
Before the first MRP planning run or before the planned orders are converted into purchase requisitions or production orders, the following amounts appear in WBS element P/4711.1:
Planned costs of $500,00
Remaining order plan value of $300,00
The MRP controller begins by converting the planned orders. First, the planned order for the material RAW-M is converted into a purchase requisition and the planned order for the material SEMI-M is converted into production order A2.The order type is flagged as not appended and apportioned to the WBS.The remaining order plan value in the WBS element changes by the amount of the internal activities portion of production order A2 to $400,00 (300,00 + 100,00).After the purchase requisition is converted into a purchase order, a cost commitment of $50,00 also appears in WBS element P/4711.1.
External Procurement
Valuated goods are received for the purchase order, but the price is $10 different at $60. Assuming that material RAW-M is price-controlled, this gives rise to a debit posting of $60,00 in the stock account and credit posting of $60 in the GR/IR clearing account (Financial Accounting).If the inventory accounts was created as a cost element in CO, the following appear in WBS element P/4711.1:
Statistical actual costs of $60,00 in the stock cost element
A cost commitment of $0,00
If material RAW-M is price-controlled the standard price is $50,00, the postings in Financial Accounting are: $50,00 debit to a stock account $10,00 debit to a price difference $60,00 credit to the GR/IR clearing account
In this case, the only figure in the WBS element would be statistical actual costs of $50,00.
Above excerpt from SAP help, may I know how to do configuration to creat commitment for PO PR but not creat statistical cost for GR?
Thanks and regards,
Ray

Hello Jie,
if i right assuming your query then PR->PO= Commitment should be created.
but GRN by MIGO=Statistical cost should not create once MIGO if right then actual cost would be 0.
you can activate commitment by OKKP transaction.
And you want to cost should not be statistical after MIGO right?
here solution is cost never statistical type until account assignment object not statistical type this is my assumption.
if this is the issue then check G/L account from the PO. then check that G/L account, whether it is a B/S account or P&L account? I think you have wrongly assigned P&L account.
Regards,
Sanjeev

After CC packager created installer for Lightroom, Installer does not install

Similar Messages

Maybe you are looking for