After firmware update "charger not supported"

Hi. On Saturday I updated the firmware on my 5310 XpressMusic, to v10.17 I think.
Since then it has been unable to recognise my battery charger. I get the message
"charger not supported". This is with the charger that came with my phone (AC-3E),
which worked fine before the update. I also borrowed a friend's charger, same
problem. Is there anything I can do to fix this? Right now the battery is run down,
and I'm in Spain, so having a working mobile would be nice...

Either I miss the point, or... what exactly do you believe will you "achieve" after doing the firmware upgrade?
I don't see any reason for you to upgrade your firmware as you didn't have any issues with the old firmware.
Firmware upgrades are there, to make the devices more compatible to computer, that HAVE problems with the current Firmware-version. This is not your case. Ask the (hopefully still) friendly Toshiba service to replace you the drive one more time, and keep it the way it is given to you without rendering it useless again.
Maybe there is a wrong link on the website which is making you download a wrong firmware (different model-version Firmware). Although you believe to download the correct firmware, you finally download a wrong one.
Usually Firmware upgrades, that make your drive useless are not covered by ANY warranty. You were lucky to have it replaced the first time,... hope you will continue having this luck.
Regards,
electrochain

Similar Messages

IPhone 5 unlocked for months, after firmware restore "SIM not supported error"

I purchased a 16GB iPhone 5 a month after initial release from an authorized retialer in Austria, it was factory unlocked (at least I thought so) and has been working wonderful since purchase. I have used it in multiple countries and used many different SIMs. I tried doing a full restore on 6.1.4 and now I receive the "SIM not supported" errror. I tried many SIMs that have previously worked, but no luck. I did a search and according to IMEI.info, it is locked to the Austrian A1 carrier. It seems it went from being unlocked to locked during the restore and now it is pretty much bricked, as I can't get past the activation screen. Help please?

There should be no original carrier as it was factory unlocked. If IMEI.info says its locked to A1, would that certainly be correct? The phone was never even used with them.

Charging not supported by this accessory after updating to 2.2.1

I have two iPod Touches and after updating one of them to software 2.2.1 it will no longer support charging from my JBL Onstage. Can this be fixed? I don't really want to go back to version 2.2 because that doesn't support some games that I have downloaded such as StarWars FX.
The iPod Touches are 1st generation I believe, not positive as I just bought them from a friend.

Hi CJ-
There are some chargers designed for thr original iPhone that are not compatible with the 3G and later models. Are you using the USB cable that came with the 3G? That cable, when plugged into a computer USB port, or, when plugged into the power cube / wall outlet, should charge the 3G just fine.
Due to the nature of Lithium Ion batteries, there are safeguards in place to prevent the wrong type of charger from supllying charge voltage to the batteries, and if the proper pins and resistance is not detected by the phone, the circuitry will block charging and give that message.
Therefore: If you are using a 3G compatible (oem, or otherwise valid charger), and you're seeing that "not supported" message, it could be the cable you're using, or it's the phone/circuitry detection in the phone that detects the cable / charger type.
And, if you are getting some charge, but it's not holding very long, it could be that it's a 3G, and the lifespan of the battery is near end of life. The fact that you're getting a charging not supported message is probably of more importance as to why the battery is not fully being charged.

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

HT1476 when i charged my iphone on y pc after some time showing charger not supported with this accessory what have to do to solve it

when i charged my iphone on y pc after some time showing charger not supported with this accessory what have to do to solve it

If you did not do a reset of your iPod please try that (you will not lose any data)
Reset iPod touch: Press and hold the On/Off button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If this does not work inspect the opening in your iPod where the cable connects. Look for any debris and clean it (a magnifying glass may be required).

Lock Code request after firmware update on E71

After I updated successful (message was displayed by software updater) my phone, it makes a restart.
And asked for the "Lock Code". I never used the lock code function and I never changed it before.
The default Lock Code "12345" mentioned within the documentation is not working.
Re-installation of the firmware is not working as I am unable to reinstall "PC Suite Support" due to the fact that I am not able to confirm the installation on my phone. I went to the Nokia shop and they told me they have to sent the cell phone in for repair and this can takes up to four weeks. This is totally unacceptable. Until today I was I fan of Nokia phones but this has changed dramatically.

Hi
I also experienced the same problem. Phone was working perfectly prior to Firmware Update.
I had never used or changed the lock code. Initially I thought everything was fine because the
Firmware Update was reported to have been a success.
I then went through the process of selecting language (English) and setting date and time.
However, after doing all this I was then asked for a Lock Code.
I was a little bemused but tried the default '12345'. This did not work.
I tried all the other usual defaults; '0000', '1111', '1234' etc, still no joy.
After a little swearing I decided to ring the Nokia help line. After explaining the problem I was advised to go to my nearest Care Centre. I was also told that if the cause of my problem was as a result of the 'faulty' firmware update then they should do it free of charge.
Off to the Care Centre then (30 mile round trip)!!!! They rigged it up to their 'kit' and confirmed that
the Lock Code had not been changed and was still set to '12345'. They could not access the phone
either. They now have my phone and are going to try and sort it and if they cannot sort it will be
sending off to Nokia. This should then be sorted under warranty (although I would argue the cause
of the problem is a glitch in the Firmware Update and not a fault with the phone).
Let's hope that when I get the phone back it will all be hunky dory!!!
It's also worth noting that even though I could not access the phone directly by using its own keys
I could use all the functions when rigged up to my computer through Nokia PC Suite. I could access
all contacts, messages, calendar etc. I was also able to send and receive SMS. If the phone was
locked then surely I shouldn't have been able to do this????
Hope the above sheds some light on your problem. Just be sure that you are not fobbed off by
either the help line or the 'techies' in the shop. At the end of the day if you have not messed about
with the lock code before the firmware update you should be able to get it sorted free of charge if
the phone is still under warranty. GOOD LUCK!!!!

"Charging not supported with this accessory"

I am a long-time Apple user, and feel like I know my way around the basics. I'm afraid I have a confusing/frustrating issue and don't seem to be alone. I have a third generation iPod touch. It's about 18 months old, and does not see heavy use. It used to connect, and charge, without any problem to a Logitech Pure-Fi Elite speaker system, an FM transmitter/charger I use in my car, and a couple of portable chargers with USB ports that I use for traveling in addition to my laptop. I recently acquired a new MacBook Pro running 10.6.8. To stop the constant iTunes upgrade requests, I went ahead and ran the update. Since then, I get the "Charging not supported..." sign, with every device, though I finally got it to connect to my laptop yesterday. It will no longer accept a charge through the Logitech system, and in fact stops sending music signals after half a song when docked, and will not play through the auxiliary output at all, though it will still play through headphones, at least the scrap that I did try in my attempt to troubleshoot it. It will not charge through the car system any longer. Either there is a terrible coincidence of software upgrade and hardware failure, or somehow the software is screwing up the processes that worked fine before. I have to say, Apple upgrades often seem like more trouble than they are worth. There is always something lost when these 'improvements' are made. I am not happy.

I almost have exactly the same problem with the same iTouch generation/age. But charging with normal Apple charging cables. Would love an answer to this! Thanks!

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Charger not support

charger not support and after updated ios7 its shows."this accessory may not be supported" i have 3 usb cables and different 2 adapters. i tried each with and i reset my phone also. but the same things happening

Clean iPhone charging port with clean dry toothbrush. If still problem, iPhone 5S has Warranty, make Genius reservation or set up service and take or send iPhone, Lightning Cable, Wall Adapter to Apple for resolution.

Phone not working after OS update, phone not working after OS update

phone not working after OS update, phone not working after OS update

I do have a questiion. I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen. It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!! I have tried holding down the home key and power button several times and the same message continues to appear.

HT1386 I have IPod touch running iOS 5.1.1 and Windows 7 with iTunes 11.0.4.4. When I connect the IPod to my PC, iTunes recognizes it but before synching can get very far, it is interrupted by "charging not supported on this acc." Now what to do?

I'm having trouble with the wi-fi synch for iTunes and would be happy if I could just synch by the USB cable. With the new iOS, the connection to iTunes seems to get broken every time the dreaded "charging not supported with this accessory" appears, which is only a few seconds into the synch. Since my PC is obviously not an Apple brand charger, IPod won't stop producing this message. Using the Dismiss button doesn't resolve the issue because synch has already stopped. It looks like the hardwire to PC option is now dead.

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

No longer able to access Web Management after Firmware Update [SF200]

Hello!
Today I was attempting to set up SNMP on our SF200-48 switch. I realized we were running old firmware which does not support SNMP and that the most current version (1.4.0.88) does support it. I attempted to upgrade the firmware but it failed, so I decided to install the 1.1.2.0 firmware because I read that the firmware flash process has changed before 1.4
Unfortunately, after rebooting I was no longer able to access web management on the switch. Unfortunately SF200 switches do not support CLI.
The switch is functional and responds to ping, but I cannot get into management to do anything, is there any steps we can try or will I need to reset the switch? After resetting the switch, will I lose any configuration but still not be able to access management? We do not have any other switches to drop in place of this one, and I'd like to minimize downtime as much as possible.
thanks,
Graham Rounds

Hi Graham,
if you are sure that the ping response is coming from the switch then I guess the only thing you could try is the factory reset but you will loose all the configuration. You might call also Small Business Team and open a ticket so they will proceed with RMA if necessary:
http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Regards,
Aleksandra

HT4060 ' charging not supported with this accessory' and Not Charging at all

Help and advice please.
I am having problems getting the new IPad to charge at all and sometime it displays this message.
' charging not supported with this accessory'. This message is appearing occasionally on my 5 week old new iPad (3) within a few minutes of plugging it in. :( It is also not charging after this message appears. I am using the supplied wall socket and cable. I am also having problems getting the iPad to charge at all even if the message does not show. This is frustrating me no end. I expected a reliable device given the amount I paid.
I am so disappointed, frustrated and feeling some what angry.
I rang Apple support today (twice) and it made a liar of me working just fine for few minutes the first time then again failed, then for hour or so after the second call seemed to work just fine. Now it is not charging, and won't charge despite repeatedly unplugging and repluging, Switching off the iPad and turning it back on etc etc.
I am not happy at all!

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Charger Not Supported, Subsequent Death

I started re-using an old 2323c I had in the house after losing a previous phone. It's only temporary. Anyway, it was working fine, but it ran out of battery and when I plugged in a charger I got the 'Charger Not Supported' message. I tried another charger, same thing. However, I turned it off and plugged it in again, and it started charging while the phone was off. After about 45 minutes of charging, the battery symbol disappeared and the screen went blank. Now, the phone won't turn on full stop. It will randomly charge for a minute or two when I plug it in now.
Is this a hardware issue? The phone has never been used, it was a backup phone sitting in a drawer for a year or so. Is there anything I can do? I know it probably needs repair or something, but I'm planning to get another phone at the end of the month so I don't want to bother with that. Any other solutions besides throwing it a wall? Thanks.

Remove the Battery for a couple of minutes, insert and see if the phone switches ON ..Only other thing you can try is try another Battery to confirm its not related to a dead battery (though it showed charging...) as the phone was idle for such a long time ...

MiniDP to VGA Adapter - screen flickering, even after Firmware Update

Hello,
concerning the MiniDP to VGA Adapter, I'm experiencing the same issue many other users are complaining about: When hooked up to my 22" external LCD, the screen goes black from time to time. After 1-2 seconds it's back to normal; still enervating though.
Model:
LG L227 WTP-PF (@1680x1050 + max. colors; only available refresh rate: 59,9 Hz)
MiniDP-VGA Adapter Firmware: 1.03 (current)
Mac OSX 10.5.6
MacBook Pro 15" Unibody (Late '08)
Apple Software Update says I'm up-to-date on the software side. I've read that the low refresh rate could be responsible for this. Only problem: I can't change it in System Preferences/Monitor settings. Other options than 59,9Hz are greyed out.
Any solution to this?
Thanks in advance,
Tobi
Message was edited by: GSOY

I've got almost exactly the same set up, only with a Samsung display, and I too have found that the recent adapter firmware update has not done the trick.
However, since you have a PRO, you are (maybe) in luck. The PRO has two graphics options, the 9400M (which is the same as in the MB) and the 9600M GT. You switch between these by selecting "Higher Performance" or "Better Battery Life" in the Energy Saver System Preferences.
I have found that by selecting "Higher Performance" I do not get the screen blanking at all. It is slightly annoying that when taking my Mac on the move, I have to switch back to "Better Battery Life" (and hence log out) if I want to get the most out of my battery, but it is the only way I have found of ensuring a screen-blanking free experience when sat at my desk using the external display.
Hope this helps.
Ade
P.S. I have a LG LCD HD TV too, and don't find I have the problem with either graphics card when using this. I only connect at "something x 768" to the TV, whereas the 22" monitor is "something x 1050", so maybe there is a problem with the 9400M driving higher resolution displays? I presume it can drive Apple's own HD displays ok though....?

After firmware update "charger not supported"

Similar Messages

Maybe you are looking for