After HDD exchange Satellite A200-1YW began to turn off

Hi!
I have a problem with Toshiba Satellite A200-1YW.
After changing the hard drive (company) I got my notebook repaired, but a day later he began to turn off the notebook Connected to the power.A When the battery is not off, or When it is plugged in the bios ...
someone help ??...
ps. I know not Whether it's a good rating so sorry
ps. sorry for mistakes but I am Polish and I do not know English well: (

Hmmm... the whole think is pretty strange.
Fact is that HDD exchange should not have any negative influence and not be reason for these shut downs. I have done this numerous times on different models and Ive never noticed something like this.
In my opinion there must be some other reason.
What I am missing in your first posting is exact explanation when this happen exactly .
When the OS will be loaded or later?

Similar Messages

Satellite A200-1YW - Need storage card driver for Windows 7

Hello.
I have problem with installation storage card driver on Windows 7. I can't find the appropriate driver for this model. Pls give me link to this driver.

Hi
I assume you mean the Flash Card reader on your notebook?
The Satellite A200-1YW belongs to the PSAE3 series I think and therefore you can get all drivers here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
I have founded driver for Vista 32bit. If you use Windows 7 32bit you should try this driver. Normally it should work.

I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off,

good afternoon, I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off, probably warming, but this rare, is suddenly going slow parapadear and image.
also sounds like when damaged ballasts for lamps,
ANYONE know what could be the cuasa and / or what is causing this.
greetings and thanks in advance

Hi,
Please write your TouchSmart model number, which system are you using and country of purchase.
Resource:
How Do I Find My Model Number?
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Help to find the driver of controller HDD on Satellite A200 (PSAE6)

Greetings. This text has been written through a translation program, try to understand :)
Problem:
My friend has bought couple of days back to itself TOSHIBA Satellite A200 (PSAE6) where it has been established OS Windows Vista Home. It has asked me to change OS on Windows XP Pro. With the first problem I have consulted - have removed Vista, but to establish XP it is not possible because of absence of the driver of controller HDD in distribution kit OS. Windows Installer cannot find HDD. I read that it is necessary to load this driver during installation, pressing of key F6. But a problem that I cannot find the driver in that.
We do not have disk with drivers which should go complete with a computer and consequently it is necessary to search independently on the Internet. On site Toshiba to find the driver it was not possible. Then I have come on site Intel and download "RAID/AHCI - Intel® Matrix Storage Manager ". Having unpacked I have received archive only "infinst_autol.exe".
Question:
Where I can download such driver (not a format "EXE") which can be used at installation WinXP?
PS: a chipset - Intel PM965 Express
Thanks

Intel matrix storage manager from Intel download web.
Find your chipset, download and run. It will install in some dir. drivers.
Must remember that you will must made your own XP installation with drivers.
enjoy

Satellite L555-10N display wont turn off after 10min on non-usage

Hi,
I've recently acquired a Satellite L555-10N notebook, which until now turned out to be a good choice.
I have a little problem, though:
In my Energy preferences, I set the time at which the display should turn off to 10 minutes, if the notebook is not in use.
Although this worked fine for the last days and weeks, the display now won't shut down at all.
I have not made any changes to drivers or BIOS or whatsoever.
I remember changing some preferences at the ecoUtility-Setup to enable it.
At that point, I got a message that some preferences would have to be changed in order to enable the feature and I agreed.
I could not notice any changes that were made, but from that point on, the display wont turn off any more.
I would very much appreciate your help!
Thanks!

Hi
Which OS you are using?
For Vista and Windows 7 I have founded a good article about the settings in Windows Power Management:
http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm
Furthermore you can change the settings for every profile. That means you have to choose the Turn off the display function for this power profile that you use or every profile if I use all of them.
Check this!!!

Satellite P200-1BY - Wi-Fi turns off after reboot

Hello,
On Satellite P200-1BY, on reboot, the wi-fi turns off on reboot. The switch then is useless.
I don't know where does this come from, and another reboot set the thing right.

Can you enable it again with FN+F8?

Satellite L600: How can I turn off the main Wireless Communication Switch?

Hello! Would be very grateful for any help....after struggling for 3 months I finally signed up here hoping to get some help.
I have a new Satellite L600/ Win7 Home Premium.
My questions is that I can not find where the MAIN wireless switch is in order to turn wireless off COMPLETELY.
Everytime I start up, the wireless (orange) light switches on automatically.
I have to wait till start up finish and manually turn it off by Fn-F8.
When I open ConfigFree, (or Connectivity doctor), the diagnosis on the bottom left says [STATUS" Wireless Communication Switch: ON]
This tells me the main switch is somehow still ON.
I called Toshiba twice and they couldn't find it either.
They said the new versions of BIOS doesn't allow it...? And for this model there is no physical switch built on the PC itself.
I have looked everywhere and did the following:
(1) Disable the adapter from Device manager.
(2) In HWSetup, where there used to be an option to click the wireless switch off, it is not there anymore.
(3) I went into BIOS setup and could find nothing remotely related to wireless/bluetooth to switch.
I'm just wondering why there is a laptop with wireless switch ON permanently? But if it's ON, there must be a way to switch it off. Press Fn-F8 every time on start-up is not a long term solution as risk is I'll forget one day).
As my last laptop was hacked before it is top priority that I know how to turn off ALL wireless function. So even if I have to do it via Commands, I will try it. Also, I'm not sure if anyone else experience the same with this model, or is this a defect in my particular PC?
Any help or same experience will be much appreciated, thank you.
I disabled the adapter in the device manager.
When I open ConfigFree, the Connectivity doctor tells me the Wireless Communication Switch: ON

Hi thanks for your replies! Sorry if I'm slow on the forum, at first I couldn't find where my thread went! Apparently it's moved to under Wireless. Is there alert message to let us know when my question is being moved?
Thanks Paolo30, I am glad to know that Fn-F8 is enough. when I check Network Connections, the Atheros adapter is 'disabled'. Sorry may I ask if WLan card you are talking about in device manager = Atheros adapter? (Despite reading furiously on books to patch up my ignorance on the wireless last few weeks, still not sure the difference between 'adapter' and 'card'... :) Are they the same thing?
Thanks Xardas. I checked the status in device manager and Atheros adapter is 'disabled'. I'm glad to know everything is ok if I see that! :) As my laptop was tampered wirelessly (and I don't know how they did it), I bought a new one and it's important for me to know it's 100% safe. Still, I want to tell Toshiba engineers it would be great to find out where this mysterious Switch is. It's not good to feel there is some sort of wireless capacity always ON and my PC may be emitting some wireless signals for serious baddies?

GT70 BSOD or Stuck after Windows puts it to sleep mode of turns off monitor

Hi Everyone!
i have an issue (or 2) with my laptop.
both happens when:
1) whenever i put the laptop into sleep mode or either windows does so automatically (inactive period), - the laptop will go to sleep just fine.
2) windows turns off monitor after a period of inactivity. (sleep mode due to inactivity was disabled in this case)
in both the cases i mentions above, if i wake the computer within lets say 5 minutes, it'll turn on just fine.
but after a certain period of time passes it wont.
with the sleep mode, the computer will wake and will then produce a BSOD STOP error 0x4 and restart.
with monitor turned off it'll simply wont turn on, not responding to neither keyboard, mouse or power button. - i have to do a hard reboot
any ideas?
anything i can check?
note the laptop just came back from a warranty repair, so all parts have been tested and been found ok!
system specs:
MSI GT70-0ND
CPU: Intel Core i7-3630QM 2.4GHz (Intel GPU HD 4000 included)
Memory: 16GB DDR3
Storage: 750GB HDD 7200rpm
128GB SSD (Patriot Pyro SE) - OS installed on this.
GPU: 4GB NVIDIA Geforce GTX 675MX
OS: Windows 7 64bit
Thanks in Advance!!

i dont think i have the same problem as in the other thread.
my bios:
my laptop doesnt restart when my screen is turned off and i try to wake it. it would simply wont wake up.
and my BSOD happens only after i wake the laptop from sleep mode and only if it been in sleep mode for a while. meaning i if i wake it up within a few mins of going to sleep it'll boot justfine.

HT1688 What should I do after my iphone 4s' LED light won't turn off and the camera shutter won't open after it was dropped in salt seawater?

How can I TURN OFF the LED light and TURN ON my camera shutter on my iphone 4s after it was accidentally submerged in seawater?

Welcome to Apple Communities
Water damaged the device, and you can't solve it. Take it to an Apple Store

Satellite A50 - After HDD exchange I have the same capacity

Hello, I just changed the old 40GB HDD in A50 to a new 60GB HDD.
Before I changed it I used True Image to make a backup file of the old HDD so that I can recover everything to the new HDD. However, when I did this the HDD got everything on the old HDD but the capacityis changed to 40GB..! I then use the recovery CD on the new HDD and hoping the capacity can be changed back to 60GB, but it can't...
However, when I went to disk management I can see there is another parition (black in colour) with the remaining space, but it is not shown in my computer..
Does anyone know how can I get the remaining space back?
Many thanks.

Hello
Normally if you clone a HDD you can also change the partition sizes. I also use Acronis True Image and if I clone a HDD I will be asked for every partition size.
Check this again!!
However, now you should delete all existing partitions and then create a new one with the full 60GB capacity. For this you can use a Microsoft XP disk for example.
After this you can start to install the Windows using Toshiba recovery disk. Then you should have the full 60GB capacity.
Greets

Battery is exhausted after few hours, even when the phone is turned off

I am a Movistar - Colombia ZTE firefox open user, I have a battery problem after November 8, in the night the battery was exhausted totally, I think the phone have a virus or some trick of the operator, they try to manipulate the customers in many ways.
I charged my phone many times in the week end and the phone is getting a low battery message too quickly, I suspect the phone is making some task on background that I not request, because all the functions of the phone works fine, even I tried to uninstall the last installed apps without success, and the phone never get any hit or was dropped.
The provider, Movistar, is very tricky I don't have too much confidence of them, I installed the last update from them yesterday but not fix the problem. some days ago I installed other updates I think from movistar probably the problem starts since I made it.

Hello Jorge,
it is very unlikely that there is a virus running on the ZTE Open. Firefox OS doesn't let for any native application to run on the phone, unless it is a certified application.
As to why the battery consumption is bad, it will really help if you can give us some information about the version of the Firefox OS the phone is running on. You can find this by going to Settings -> Device Information and provide us the details.
Also, it is likely that there could be a battery issue with your phone and it might also help if you can check with the vendor to see if there is an issue with the battery.
Thank you

After loading the 1.1 update my nano turns off after 60 seconds. is there a fix for this?

After loading the 1.1 update for my nano ipod my nano shuts down after playing the music for 60 seconds. Is anyone else having this problem and is there a fix for it? Very frustrating to have to keep hitting the sleep/wake button and then play to make the music start again during my workout.

You have probably fixed the problem by now, but I also just bought a Nano and it was very frustrating with the music shutting off before the first half a dozen bars of the song. I rang Apple and they sent me this page.... (if anyone else needs help)
http://support.apple.com/kb/TS3700?viewlocale=en_US
All it was that I hadn't pushed the headphones in until they were flush up against the Nano.
Thanks Apple!

Satellite A660 How can i turn off the lighting of the power button?

Hello, I recently bought a new Toshiba A660-1FL.
However bothers me is the lighting of the multimedia keys, if I work in the dark.
In Bios I could turn off the led illumination, but the power on/off button is still lighting,that distracts me when i am working.
This notebook has two power LED, so the power on lighting is in my opinion, unnecessary.
My question is: How can i turn off the lighting of the power button?

Here you can see the LED with the same function in front of you: http://s3.imgimg.de/uploads/t009aae62jpg.jpg
Yes in fact, the difference is color, design, but also location and brightness of the LED.
For me, this LED is too bright and it is distracting in the dark, as you can see here: http://s3.imgimg.de/uploads/leddf570760jpg.jpg
I was today at a local electronics store, and saw that Toshiba has the brightest Power LED on A660, but why it must be placed under the LCD and not in the front as in my old notebook Toshiba A210.
I also had the idea with a tape, but it would look ugly, and it must be removable without residue.
P.S. Also the fingerprints on the glossy keyboard do not look nice.

Why does my iphone 4s not display the correct battery percentage? it can get really annoying if it turns off unexpectedly and after that another problem occurs with the phone turning off and on repeadtly

My iphone 4s recently started shutting off and on unexpectedly when updating a whole load of snapchat story's on my feed. However i also have a problem with the battery percentage, i've tried everything with it experimenting all most everything. i even changed my battery twice and i still don't know what to do
someone please help me

Hi 3Kadzo,
Welcome to the Apple Support Communities!
I understand you are having some concerns about the battery usage and percentage displayed on your iPhone 4s. I would suggest the troubleshooting steps in the following article to help isolate and resolve these issues.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
I hope this helps,
-Joe

After updating to 6.1.2 my iPhone turns off seemingly randomly

I don't think this has to do with the battery life as it does while its plugged in to. Anyone else have similar problems or tips?

Having the same problem. ever since i've updated 6.1.2
its a pain in the ***! any help apple? its really not ideal!!!

After HDD exchange Satellite A200-1YW began to turn off

Similar Messages

Maybe you are looking for