After inserting into one field using LOV,  how to populate other fields ?

Hi,
I have a BLOCK based on a table (ex:EMP)
And I have a LOV on the field(item): EMPNO.
When I select one EMPNO from the LOV (when the field:EMPNO is populated with an emp number), the other fields should be populated
Can some body let me know, which trigger I need to use and .......
Thanks

while creating LOV at empno you can this query
select empno,ename,deptno from emp
and define return item for each column.
You can populate LOV manually at New_instance_item or Key_next_item
of item empno.

Similar Messages

  • How do I scan multiple pages into one document using the CanoScan LiDE 200?

    How do I scan multiple pages into one document using the CanoScan LiDE 200?
    I can't seem to find a way to get them to scan continuously, or a way to stitch them together afterwards.

    Hi dagda24,
    You can scan multiple pages into a single document with the scan to PDF option.  Use the following steps to do so:
    1.  Open MP Navigator.
    2.  Click One Clcik.
    3.  Click Save to PC.
    4.  Change the File Type from PDF to PDF (multiple pages).
    5.  Make any other changes as needed, then click scan.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HOW TO READ DATA FROM A FILE AND INSERT INTO A TABLE USING UTL_FILE

    Hi..
    I have a file.I want to read the data from file and load it into a table using utl_file.
    how can I do it?
    Any reply apreciated...

    Hi,
    This is not your requirment but u can try this :
    CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
    GRANT READ ON DIRECTORY text_file TO fah;
    GRANT WRITE ON DIRECTORY text_file TO fah;
    DROP TABLE load_a;
    CREATE TABLE load_a
    (a1 varchar2(20),
    a2 varchar2(200))
    ORGANIZATION EXTERNAL
    (TYPE ORACLE_LOADER
    DEFAULT DIRECTORY text_file
    ACCESS PARAMETERS
    (FIELDS TERMINATED BY ','
    LOCATION ('data.txt')
    select * from load_a;
    CREATE TABLE A AS select * from load_a;
    SELECT * FROM A
    Regards
    Faheem Latif

  • Two separate iPhones got merged into one iTunes account. How to separate them. We are sharing all of each other's contacts at this time. Thanks for your help.

    Two separate iPhones got merged into one iTunes account. How can I separate them in iTunes???????. We are sharing all of each other's contacts at this time. Thanks for your help.

    The reason you are receiving each other's text messages is because you are both using the same Apple ID for iMessage.  To prevent this you need to use different IDs.  (Note: you can still share the same ID for iTunes.)  On one of the phones, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a separate ID.
    To migrate your 3GS to a new iCloud account, start by saving any photo stream photos that you want to keep on the phone to your camera roll.  To do this, open the my photo stream album, tap Edit, tap the photos, tap Share, tap Save to Camera Roll.  Next, if you have any notes that you are syncing with iCloud that you want to keep, you'll need to email these to yourself so they can be recreated after moving to the new account.
    Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The phone that will be keeping the account will not be effected by this.)  When prompted about what to do with the iCloud data, choose Keep On My iPhone.  Next, sign back in with a different Apple ID to create the new account, turn iCloud data syncing preferences and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.
    Finally, if you have merged data in the two accounts that you want to separate you will have to go to icloud.com from your computer, sign into each iCloud account separately and manually delete the data you don't want from each account.

  • Fetch data from two tables and insert into one table

    I have similar to the following data in two tables (@Plant, @PlantDirector) and need to consolidate into one table (@PlantNew) as follows.
    DECLARE @Plant TABLE (PlantID INT, PlantName VARCHAR(100))
    INSERT INTO @Plant (PlantID, PlantName) VALUES (1, 'Name One'),(2, 'Name Two'),(3, 'Name Three'),(4, 'Name Four'),(5, 'Name Five'),(6, 'Name Six')
    Director data for the Plants exist in the following table. Assistant value 1 means Assistant Director and 0 means Director. 
    Data exists only for subset of plants and a Plant may have one or both roles.
    DECLARE @PlantDirector TABLE (PlantID INT, PlantDirectorID INT, Assistant bit)
    INSERT INTO @PlantDirector (PlantID, PlantDirectorID, Assistant) VALUES (2, 111, 1),(2, 222, 0),(4, 333, 0),(6,444,1)
    The above data needs to be inserted into one table (@PlantNew) as follows: 
    PlantID in @Plant table is IDENTITY value and needs to be inserted as-is into this table.
    PlantDirExists will get a value of 1 if at least one record exists in @PlantDirector table for a PlantID. PlantAssistantDirID and PlantDirID should be set to the corresponding PlantDirID or NULL appropriately depending on the data.
    DECLARE @PlantNew TABLE (PlantID INT, PlantName VARCHAR(100), PlantDirExists bit, PlantAssistantDirID INT, PlantDirID INT)
    INSERT INTO @PlantNew (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID)
    VALUES (1, 'Name One', 0, NULL, NULL),(2, 'Name Two', 1, 111, 222),(3, 'Name Three', 0, NULL, NULL),(4, 'Name Four', 1, NULL, 333),(5, 'Name Five', 0, NULL, NULL),(6, 'Name Six',1, 444, NULL)
    How do I achieve the above using SQL ? Thanks.

    like this
    INSERT @PlantNew  (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID) 
    SELECT p.PlantID,
    p.PlantName,
    CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
    PlantAssistantDirID,
    PlantDirID
    FROM @Plant p
    LEFT JOIN (SELECT PlantID,
    MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
    MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
    @PlantDirector
    GROUP BY PlantID)pd
    ON pd.PlantID = p.PlantID
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
    You're missing a FROM
    insert into @PlantNew
    SELECT p.PlantID,
    p.PlantName,
    CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
    PlantAssistantDirID,
    PlantDirID
    FROM @Plant p
    LEFT JOIN (SELECT PlantID,
    MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
    MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
    from @PlantDirector
    GROUP BY PlantID)pd
    ON pd.PlantID = p.PlantID

  • Can select, but cannot insert into oracle tables using php.

    I am having trouble inserting data into a tables in oracle using PHP. I can insert into the tables using baninst1, but nothing else. I can't even insert using the tables' owner. Every time I try I get the ORA-00492 error of table or view does not exist. However, I can run a select statement just fine. So far, baninst1 is the only user that can actually do inserts. I've triple checked all the table grants and everything is fine. Also, I can copy/paste the exact insert statement into SQL*Plus and it works with the correct user. It doesn't have to be baninst1. I've tried everything I can think of. I've tried putting the table name in quotes, adding the schema name to the table, checking public synonyms, but everything appears to be ok. I would greatly appreciate any suggestions others may have.
    I'm using PHP 5.2.3 with an oracle 9i DB.

    Here is the code that doesn't work. It works only with baninst1, no other username will work and all I do is change the my_username/my_password to something different. This is one example function where I try to do an insert, but it doesn't work on any of the tables I try.
    Thanks for looking.
    class Oracle {
         private $oracleUser = "my_username";
         private $oraclePassword = "my_password";
         private $oracleDB = "MY_DB";
         private $c = null;
         function Connect() {
              if ( !($this->c = ocilogon( $this->oracleUser, $this->oraclePassword, $this->oracleDB ) ) )
                   return false;
              return true;
         function AddNewTest($testName, $course, $section, $term, $maxAttempts, $length, $startDate, $startTime, $endDate, $endTime)
              $result = "";
              if( $this->c == null )
                   $this->Connect();     
              $splitIndex = strpos($course, " ");
              $subjectCode = substr($course, 0, $splitIndex);
              $courseNumber = substr($course, $splitIndex + 1);
              $insertStatment = "insert into szbtestinfo(szbtestinfo_test_name,
                                                                szbtestinfo_course_numb,
                                                           szbtestinfo_section,
                                                                szbtestinfo_max_attempts,
                                                                szbtestinfo_length_minutes,
                                                                szbtestinfo_start,
                                                                szbtestinfo_end,
                                                                szbtestinfo_id,
                                                                szbtestinfo_subj_code,
                                                                szbtestinfo_eff_term)
                                                                values( '" . $testName .
                   "', '" . $courseNumber .
                   "', '" . $section .
                   "', " . $maxAttempts .
                   ", " . $length .
                   ", to_date('" . $startDate . " " . $startTime . "', 'MM/DD/YYYY HH24:MI')" .
                   ", to_date('" . $endDate . " " . $endTime . "', 'MM/DD/YYYY HH24:MI')" .
                   ", szsnexttest.nextval" .
                   ", '" . $subjectCode .
                   "', '" . $term . "')";
              //return $insertStatment;
              $s = OCIParse($this->c, $insertStatment);
              try
                   $result = OCIExecute($s);
              catch(exception $e)
              return $result;
         }

  • I need to make a copy of an entire email, including the header w/the sender's info and time, etc. to insert into a letter, etc. How can I do this w/out cutting and paste and doing the header separately from the text.

    I need to make a copy of an entire email, including the header w/the sender's info and time, etc. to insert into a letter, etc. How can I do this w/out cutting and pasting   the header separately from the text. I know there is a way besides a screen shot but I've spend hours trying to find it.

    Smurfslayer wrote:
    For the particularly persnickety types you might want to expose the full headers in the email message as well.  It's easy enough to do, from mail's 'menu' select "view"; then "message"; then all headers.
    Another option you could use is a screen capture using Grab.
    Activate Grab, then shift + command + w (for a window screen shot).  Then confirm the window selection and click the mail message. 
    Dave
    Why are you addressing this to me...?
    I am not the OP...

  • Selection breaks after inserting into dataProvider

    I have been battling this issue for a couple of days now. I
    have a HorizontalList that is using an itemRenderer component that
    I created. When I insert an item into the dataProvider using
    addItemAt....
    1) the item is inserted
    2) i see the item rendered correctly in the HorizontalList
    However, the selection breaks. What I mean by this is the
    newly added items does NOT highlight when I roll over it and if I
    click on it, it does not select. This only happens for the newly
    added item, all the others that were already in the list work fine
    (highlight and can be selected).
    I've tried calling validateNow() on the HorizontalList after
    inserting into the dataprovider but it doesn't help at all.
    Please help.

    I can't believe this, but after 2 days of trying to figure
    this out I figured it out just moments after posting to the forum!
    Here is what fixed it and I am not sure exactly why. At this
    point I don't care...
    The dataProvider I was using contained a list of custom
    objects. I had a property on the class called uid. When I commented
    out this property, everything worked. I don't know what made me
    think to try this. I guess my uid property on the class was
    conflicting with the uid property on the itemRenderer component or
    something.
    Finally.

  • I want to create a cd on my mac that autolaunches an .html-page after inserting into a pc or a mac. Is that possible?l

    I want to create a cd on my mac that autolaunches an .html-page after inserting into a pc or a mac. Is that possible?

    Solving this requirement on a modern Windows system is going to be problematic too, as the autorun mechanisms are increasingly being locked down over there, if not by the end-user or the system installer, then by the usual anti-malware tools that are installed.
    Given this is one of the most vulnerable populations here in terms of operational security, you'll probably want to target online distribution, or to distribute a signed application that can be installed on the target (akin to a managed system) and that then accesses your data on external storage.  All that app might do is access the disk, verify that the contents of the device are trusted and valid, and launch the browser.
    I'd likely target online distribution or pre-loaded distributions and iOS, as that's where all of the older folks I'm dealing with are headed, too.  If not a native app, then maybe a web-app here, and download the contents into the HTML5 local storage.

  • How to populate the field Discount Percent (DIS) in the outbound S1ORDEXC?

    Hello all,
    I am working with the Spec2000 to send out the IDOC S1ORDEXC.
    Does anyone know how to populate the field Discount Percent (DIS)?
    This field length of Discount Percent is 2 characters, but our customer discount in the Princing Conditions (Sales Order) is longer than 2 characters (ex:  7.500-%)
    Thank you

    Hello Thuan
    I guess you are working with IS- ADEC and SPEC 2000. I am not an expert on this but leave you some hints from OSS notes I came across.
    It appears like Discount Percent - DIS and Procurement Discount Percent -PDP are complementary and mutually exclusive. If one exists, the other need not.
    Looks like DIS is computed as (100-PDP)/100 and it is just a 2- integer data (as in 20 Percent). It is a kind of multiplier (Factor), example if  PDP discount is 10 percent, then DIS (Factor) is 0.9 and so  final (net) price after discount = Price*0.9.
    " If the discount comes in the S1BOOKED inbound into SD in the field DIS, then the discount has to be sent back in the DIS field .. if it came in the PDP field then it has to be sent back in the PDP field. If there was no discount in the incoming IDoc, then the discount has to be filled in the PDP if there was a change in the discount".
    KDATE in SPEC 2000 file maps to DIS and KPERC to PDP.
    PDP has 4 characters and per OSS note 440380, the point is ignored meaning you can work with 1225 instead of 12.25.
    So may be you can work with PDP?
    OSS notes: Apply to older releases but may still be applicable conceptually speaking.
    456153 - S1ORDEXC does not send out Discount
    440380 - PDP has only 4 characters in the SPEC IDoc instead of 5
    596042 - Discount percent DIS not considered e processing S1ORDEXC
    698668 - Incorrect calculation of unit price for PO item by S1ORDEXC
    Let me know you final findings.

  • How to populate this fields in ce_bank_accounts?

    Hey there, first, i want to apologize for my bad english.
    i'm working with Cash management and i'm using this API ce_bank_pub because the bank are internals. i have the load from banks and branch, and kinda the bank accounts, but i can´t find how to populate this fields, that are mandatory for my requeriment:
    AUTORECON_AP_MATCHING_ORDER
    AUTORECON_AR_MATCHING_ORDER  
    RECON_ENABLE_OI_FLAG
    RECON_OI_FLOAT_STATUS
    RECON_OI_CLEARED_STATUS
    RECON_OI_MATCHING_CODE
    AUTORECON_AP_MATCHING_ORDER2
    this is my "flow of work", first, i load the data with SQL*Loader in a custom/personal table, after this, i have a cursor that select all the records of this table and do some validations, after this (and if all the records are ok) i use the API ce_bank_pub.
    i don't know if that API support those fields, I've read the documentation but can not find what I require.
    any help will be appreciate.
    thanks a lot.
    [SPANISH]
    Estoy trabajando con una carga de bancos, sucursales, cuentas bancarias y usos de cuentas, hasta ahorita todo bien, solo tengo problemas al poblar los campos que se muestran en la parte de arriba en la tabla ce_bank_accounts, estoy utilizando el API ce_bank_pub ya que los bancos son internos.
    mi procedimiento, o la manera que lo hago es ésta:
    cargo los datos con SQL*Loader a una tabla intermedia/temporal por decirlo así, posteriormente un cursor selecciona los datos para realizar las validaciones y las reglas de negocio y si los datos son correctos utilizo el API, eso es en general para las 4 cosas, pero los campos de arriba no se como cargarlo, modificarlos o si hay alguna otra manera para agregarselos.
    cualquier ayuda es apreciada.
    Muchas gracias.

    Hi Miguel,
    hope this helps ...
    AUTORECON_AP_MATCHING_ORDER - Order of matching statement lines to AP transactions, by transactions first or by batch first, lookup type BATCH_OR_TRX
    AUTORECON_AR_MATCHING_ORDER - Order of matching statement lines to AR transactions, by transactions first or by batch first, lookup type BATCH_OR_TRX
    AUTORECON_AP_MATCHING_ORDER2 - Order of matching statement lines to AP transactions, by transactions first or by batch first, lookup type BATCH_OR_TRX_OR_GROUP
    For all the above three fields, navigate to Lookups from Cash Management responsibility and find the lookup type BATCH_OR_TRX, this will have 3 values, B for Batch, G for Group and T for Transaction ..... pass any one of the three value as per your requirement ..
    RECON_OI_MATCHING_CODE - Open interface transactions matching code, T for matching by transaction number, D for matching by date and amount. Lookup type: OI_MATCHING_CRITERIA
    For the above field, navigate to Lookups from Cash Management responsibility and find the lookup type OI_MATCHING_CRITERIA, this will have 2 values D for Date and Amount, T for Transaction Number .... Pass any one of the two values as per your requirement ...
    RECON_ENABLE_OI_FLAG -  Flag to indicate whether to allow reconciliation of statement lines to open interface transactions, Y or N
    As per your requirement indicate Y or N ....
    RECON_OI_FLOAT_STATUS - Code to specify the float status for open interface transactions
    RECON_OI_CLEARED_STATUS  - Code to specify cleared status for open interface transactions
    I am not sure about the above two ...i.e. the values that needs to be passed ...
    Regards,
    Ivruksha

  • How to populate extended fields of VENDOR MASTER IDOC (CREMAS05)

    Hi,
    I have appended a new field to table LFA1 and the same has been placed on the screen. I have extended the basic IDOC type CREMAS05 to accommodate the newly added custom fields. Now when the vendor is created using IDOC how to populate these custom fileds. As the standard IDOC FM is using BDC to create the vendor. Please help.
    Thanks,
    Satish

    SAP uses function module ADDRESS_INTO_PRINTFORM
    this has usually 10 lines for the complete  address, so that it fits into the window in an envelope
    If you address has more than 10 lines, then SAP reduces this lines to 10, by skipping some of them.
    Read details in docu:
    http://help.sap.com/saphelp_nw04/helpdata/en/18/c042e1da4811d3b571006094192fe3/frameset.htm
    (open the menu on the left to navigate to the fomatting of the street.

  • How do i expand a field in a line with 3 other fields when forms design will not allow

    how do i expand a field in a line with 3 other fields when forms design will not allow it? I also want to shrink one of the fields and cannot do so.

    It is possible that all there is not enough room on your line to grow the field. You can try a few things :
    - Make the form width wider by dragging the right edge of the form or via the Form Setup dialog (File > Form Setup... and change the Form Width)
    - You can make other field on the row narrower (if they are not already at their minimum width).
    Each field type has a minimum width. What field type are you trying to make smaller?
    For example : Text and Multiline can go down to a width of 30. Dropdown min width depends on the length of the long item in the dropdown list.
    Hope this helps
    Gen

  • Automatically populate fields in jsp documents based on other fields

    hello guys. I have a jsp document
    that has the following
    <af:inputText value="#{bindings.SourceDocumentId.inputValue}"
    label="#{bindings.SourceDocumentId.label}"
    required="#{bindings.SourceDocumentId.mandatory}"
    columns="#{bindings.SourceDocumentId.displayWidth}"
    binding="#{backing_transactions_editTransactions.docId}"
    id="docId">
    <af:validator binding="#{bindings.SourceDocumentId.validator}"/>
    <f:convertNumber groupingUsed="false"
    pattern="#{bindings.SourceDocumentId.format}"/>
    </af:inputText>
    <af:inputText value="#{bindings.DocumentName.inputValue}"
    label="#{bindings.DocumentName.label}"
    required="#{bindings.DocumentName.mandatory}"
    columns="#{bindings.DocumentName.displayWidth}"
    binding="#{backing_transactions_editTransactions.docName}"
    id="docName">
    <af:validator binding="#{bindings.DocumentName.validator}"/>
    </af:inputText>
    And I have created the generated the backing beans automatically.
    public class EditTransactions {
    private CoreInputText docId;
    private CoreInputText docName;
    public CoreInputText getDocId() {
    return docId;
    public void setDocName(CoreInputText inputText7) {
    this.docName = inputText7;
    public CoreInputText getDocName() {
    return docName;
    I have a method in appmodule that has this
    public String getDocName(Number docId)
    {String docName;
    return docName
    on the document Id field I have to input a certain docId after I input the docId I have to populate automatically the docName based on the doc Id being given.
    question
    1. how can I set the document name automatically w/out submitting the page ?
    2. how can I use my backing bean to set the docName using the method in my AppModule.?
    Can anyone help me regarding this one.
    Thank in advance
    alvin.

A: automatically populate fields in jsp documents based on other fields

here is what you need to do:
1. Change the definitions for your fields as following
<af:inputText value="#{bindings.SourceDocumentId.inputValue}"
                        label="#{bindings.SourceDocumentId.label}"
                        required="#{bindings.SourceDocumentId.mandatory}"
                        columns="#{bindings.SourceDocumentId.displayWidth}"
                        binding="#{backing_transactions_editTransactions.docId}"
                        id="docId" valueChangeListener="#{backing_transactions_editTransactions.docIdChange}"
autoSubmit="true">
            <af:validator binding="#{bindings.SourceDocumentId.validator}"/>
            <f:convertNumber groupingUsed="false"
                             pattern="#{bindings.SourceDocumentId.format}"/>
          </af:inputText>
          <af:inputText value="#{bindings.DocumentName.inputValue}"
                        label="#{bindings.DocumentName.label}"
                        required="#{bindings.DocumentName.mandatory}"
                        columns="#{bindings.DocumentName.displayWidth}"
                        binding="#{backing_transactions_editTransactions.docName}"
                        id="docName"
partialTriggers="docId">
            <af:validator binding="#{bindings.DocumentName.validator}"/>
          </af:inputText>2. add the followig method to your backing bean:
  public void docIdChange(ValueChangeEvent valueChangeEvent) {
    getDocName().setValue((String)getDocId().getValue() + "suffix");
  }Run your form and enter the value into docId field, then press tab to go to the next field - docName will be populated

here is what you need to do:
1. Change the definitions for your fields as following
<af:inputText value="#{bindings.SourceDocumentId.inputValue}"
                        label="#{bindings.SourceDocumentId.label}"
                        required="#{bindings.SourceDocumentId.mandatory}"
                        columns="#{bindings.SourceDocumentId.displayWidth}"
                        binding="#{backing_transactions_editTransactions.docId}"
                        id="docId" valueChangeListener="#{backing_transactions_editTransactions.docIdChange}"
autoSubmit="true">
            <af:validator binding="#{bindings.SourceDocumentId.validator}"/>
            <f:convertNumber groupingUsed="false"
                             pattern="#{bindings.SourceDocumentId.format}"/>
          </af:inputText>
          <af:inputText value="#{bindings.DocumentName.inputValue}"
                        label="#{bindings.DocumentName.label}"
                        required="#{bindings.DocumentName.mandatory}"
                        columns="#{bindings.DocumentName.displayWidth}"
                        binding="#{backing_transactions_editTransactions.docName}"
                        id="docName"
partialTriggers="docId">
            <af:validator binding="#{bindings.DocumentName.validator}"/>
          </af:inputText>2. add the followig method to your backing bean:
  public void docIdChange(ValueChangeEvent valueChangeEvent) {
    getDocName().setValue((String)getDocId().getValue() + "suffix");
  }Run your form and enter the value into docId field, then press tab to go to the next field - docName will be populated

  • How to insert into two tables using a Single ADF creation form?

    Hi,
    I need to make a ADF Creation Form that will insert the data at same time in two tables... Like i have two tables Track (Track_id,Track_Name)
    and Module ( Module_id, Track_id, Module_name, Module_Short_name) and i have to insert the data in both the tables using Same Creation Form.
    can anybody help me out and gave me the solution,how to do that?
    Thanks

    if you want to insert different data into two different tables then you can drag the two data objects into creation form..
    If you want to duplicate the data inserted in the one table to another then you can follow two approach
    1. Drag and drop one table, When Save button is invoked then insert data into another table using callable statement.
    or
    2. Create on-insert trigger in Table1 where you can insert data into table2.
    --Prasanna                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    • Maybe you are looking for