After IOS upgrade I get this FIPS error
FIPS: Flash Key Check : End, Not Found,FIPS Mode Not Enabled
I used this code: cat3k_caa-universalk9.SPA.03.03.01.SE.150-1.EZ1.bin
What am Idoing wrong here? will this effect the switch? I havent seen this error before and a google search isnt very helpfull.
Here is my sh ver before upgradeing IOS
Switch#sh ver
Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIV
ERSALK9-M), Version 03.02.02.SE RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 14-Jun-13 19:24 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2013 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.
(http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 1.2, RELEASE SOFTWARE
(P)
Hi,
Looks like this is not supported on that IOS XE version. See the release notes below:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3se/release_notes/OL_30562_01.html#wp57462
Hope this helps.
Similar Messages
-
I had an iMac with Snow Leopard 10.6.8, I downloaded and installed Lion, did not make me any questions. After the reboot I get this fatal error: Panic(cpu 0 ......) Kernel trap ......
Please post the Kernel Panic report. You will find it at /Library/Logs/DiagnosticReports per
http://support.apple.com/kb/ht2546
When we look at the KP report we may find some clues why it is occuring. -
BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.
All resolved at last
Deleted the SMTP setting
Recreated the SMTP using the same settings
Able to send emails now
No logic - as usual - just a bug! -
On my Mac, after the installation i get this error when i start - "Premiere Elements 13.0 has encountered an error. [/Adobe/pre/main/MediaCore/ASL/Foundation/Make/Mac/../../Src/DirectoryRegistry.cpp-283]"
any ideas how to fix this, i don't know or haven't faound out how to contact Adobe supporet....Here's the contact link for Adobe support. It's just three clicks from the site's home page.
Contact Customer Care -
After installing CF10, I get this error msg,"This page can't be displayed"
After installing CF10, I get this error msg when I try to access the Administrator page,"This page can't be displayed"
I'm running Window Server 2003, 64 bit version with IIS 6.0.
Before I installed CF10, I uninstalled CF8.@Len said, “ BTW, there is no 64 Bit entry under Application Pools.”.
I suspect @Anit was assuming you were using IIS 7, in which case you could check the IIS app pool (advanced settings, for the app pool used by the site you are browsing) to see if it was set to “enable 32-bit applications: false”, assuming CF is configured as 64-bit, or if CF is configured 32-bit, then you would want that to be set to “enable 32 bit applications: true”.
It seems you’re using IIS 6, and there is no GUI means in the IIS 6 control panel to change the bitness of the app pool. There are various means discussing how to do that on the web, as well as a blog entry from Ben Forta, from back when people were deploying CF 7 (which was 32-bit only) 64-bit Windows and IIS:
http://www.forta.com/blog/index.cfm/2006/2/6/connecting-coldfusion-mx-7-to-64bit-iis-6
For those on IIS 7, here is at least one page showing how to configure it in IIS 7 (has no reference to CF, but I had a hard time finding any existing blog entry that showed screenshots of configuring this feature):
https://help.webcontrolcenter.com/KB/a1114/how-to-enable-32-bit-application-pool-iis-7-ded icatedvps.aspx
But back to your error, @Len, if setting the bitness of the IIS app pool is not the solution, I’ll note that there can be many other reasons that you get that error. What are you seeing in the Windows Event log (using “event viewer”), or the IIS logs (especially httperr.log), or the CF logs (\coldfusion10\cfusion\logs)?
/charlie -
I can't buy elements 13 upgrade. I get this message "Error in Your order"
I can't buy elements 13 upgrade. I get this message "Error in Your order"
Hi Attila74,
Please chat with our Customer Service to receive the upgrade. http://bit.ly/E12_PAU
Ragards,
Sandeep -
After instaliling lion I get this error on Facetime "The server encountered an error processing registration. Please try again later."
what can I do?YES!! It worked for me too. I tried another suggestion from a different thread and my computer already had the correct host info. So for some reason, Facetime needs the date/time set to automatic.
-
I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?
I'm sure the pros will be along to ask what your settings are. Although this may not be exactly helpful, I did find compressor to be much more robust for burning DVDs. This could partially be because it includes a template to convert you movie into correct DVD format. I was quite pleased with the outcome after multiple failed attempts using FCPX alone.
-
My intunes stopped leting me connect my ipod or nconnect to the itunes store. So I uninstalled itunes and all apple software an tried reinstalling several times. After each instal I get the following error message.
"iTunes was not installed correctly. Please reinstall iTunes."
error 7 (windows error 126)iTunes for Windows: "Error 7" message when opening iTunes
For error 126: http://support.microsoft.com/kb/959077 -
PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!Place the device in DFU mode and let iTunes restore the device to factory condition.
-
3G icon in the status bar got disappear after ios upgrade 8.1
3G icon in the status bar got disappear after ios upgrade 8.1
Nginear48 wrote:
Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
And don't get me started on iBooks.
For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying. -
I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?
I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
DRM audio is not effected as this is handled by the native iOS music app.
As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view. -
HI. I just got a new macbook pro 15".
every time i launch garageband i get this message
"Error code 28773 was returned by the Audio driver."
when i hit record, the shaded area in GB starts to advance, but it doesn't record any sound, and when i hit the space bar, the recorded area disappears.
anyone know how to fix this?
I have installed BOOM, but i think that's the only extra sound software i have.]
PLEASE HELP!
thanks,
mojoman22Please read this whole message carefully, especially the warnings, before doing anything.
1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
3. You should either remove or update the following system modification(s), if an update is available from the developer:
Parallels
and definitely remove at least the following:
Boom
† MacKeeper
† VirusBarrier
4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
Remove the "MacKeeper" crapware as follows.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions, nor do I intend to repeat the test.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select Go ▹ Applications from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. A dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall button. All the functional components of the software will be deleted. That's the only useful feature of "MacKeeper:" it deletes itself. Reboot.
Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it. -
After ios upgrade to 7.0.4 i got power botton and no sim problem need help help
after ios upgrade to 7.0.4 i got power botton and no sim problem anyone having this problem?
Installing an iOS update does not add a physical button.
As for the "No SIM" message, try removing and reinserting the SIM or replacing the SIM. -
I am trying to install Elements, I get this constant error message. This installation is not supported by this processor type. Contact your product vendor.
I am using Windows 8.Hi,
Which version of Photoshop Elements are you trying to install?
Are you installing from DVD or a download?
If DVD, make sure you are using the Windows one, not the MAC one.
What device are you trying to install on?
Does your system meet the required spec?
Are you on Windows 8 or Windows 8.1?
Brian
Maybe you are looking for
-
I installed 5.7, ran ok for a while. Then it gave the error message that the preview cache was bad. A few times I have gotten this message and it restarts and repairs it. But now it couldn't. Renamed the Lightroom 5 catalog with the name "Lightroom 5
-
Mail is marking my "Sent" messages as Junk
Hi-- I've been noticing strange behavior by my junk mail system lately. First it was junking almost everything that came in without telling me. Now it has taken to marking all my sent messages as junk. Anybody have a clue? Thanks, Tim Mini Mac OS X
-
Disable the Advanced tab at user level while scheduling concurrent requests
How can I disable the Advanced option at user level while scheduling concurrent requests ? In the Schedule Form you have: Run the Job... - AS soon as Possible - Once - Periodically - On Specific Days - Advanced Thank you. Edited by: user635184 on Jan
-
Want to fetch Material Data from R/3 to cFolders...
<b>Hellow All, I want to fetch material data from R/3 to cfolders..Actually I need to use the skeliton of the material,I don't need to create actual material over here..How can I do that? Secondly,when we create a material inside cfiolder,where is
-
Installation WLS 6.0 on Solaris 8 Intel
Will it be possible to install suceesfully WLS6.0 on solaris 8 Intel based machines? If so, which particular file has to be downloaded for evaluation? Is it the file meant for WLS for sparc?