After loading data to data targer
wen fetching the query,at wat sequence data will come from tables(like fact table,dim table,sid table,master data table)which one is first?
Hi,
First your query go to local cache and from there OLAP cache else Aggregates, else Infocube.
Assign points if it helps
Regards
Srinivas
Similar Messages
-
Partition a table after loading data
Hi there,
Is it possible to partition a table after loading the data in OWB?
ThanksYes, it is. You would add a partition information (type, key, storage) in OWB Configuration menu of your table. More on this in User's Guide, Chapter 5 "Creating Indexes and Partitions". Next, when you deploy your changed table, Warehouse Builder detects that the table was previously deployed and offers the default action called 'Upgrade'. That action performs all the necessary steps for you without any manual work: RENAME existing table, CREATE new table with partitions, INSERT data from old to new table, DROP old table. Throughout this operation you have an added benefit of automatic recovery if anything goes wrong.
Nikolai -
Hello,
After successfully loading data into a cube, if i go to manage, i get the following
message
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
Procedure
Choose Refresh to remove the inconsistency.
If i choose refresh, i can report on the cube. But if i load data again, i get the same error.
Can you pls help?
Regards,
SurajHi Suraj,
This is an message you get when you are in the manage screen at a certain time of the load process.
If you wait a little longer before you go into manage, you will not see it.
Udo -
Missing some records after Loading Data in Oracle 11g Release 1
Hi All,
I wrote a script to load one million records into the database using all insert commands.
I know there is a faster way using SQL Loader- but i am in the process of learning but ran out of time.
Anyhow, 1 million data was injected into the database but only 999998 records are there....does anyone know why?
Is there a way I can find out which data was rejected?
thanksHello,
It could be nice that your script spool a log.
By that way, you could more easily catch the error and the detail of the rows rejected.
Best regards,
Jean-Valentin -
Why these key figures roll up but others do not after the data load
Experts,
I have 7 key figures on target cube, which all are direct mapping from source cube. After loading data from source cube to target cube, 4 of the KFs got auto rolled up by themself, but the rest do not. For example, on source cube, one student record, id is 1002345, has the following KF values to represent the 7 KFs: 3.417, 3.411, 7.346, 3.00, 131.00, 383.00, 90.00. When loading to target cube, there is update rule to get other more information for target record as well. After the load finish, each student has 5 records now. The first 4 KFs has been changed to 3.417xN, 3.411xN, 7.346xN, 3.00xN on the target cube, in some of the 5 records, which are not true for the requirement.
Here are my questions:
1) Since all KFs are direct mapping from soure, why they got changed?
2) Why only some of them change, and some of them do not?
Thanks,
LindaThanks by pointing out the way to check. Yes, I checked under RSD1 and foundout the difference between the first 4 and last 3.
The first 4 KFs aggregation is SUM, which needs to change to MAX. But even under edit mode, I can't change the aggregation(disable). So how can I change these 4 KF's aggregation?
Thanks,
Linda -
Data error while loading data using SQLLDR
Hi Gurus,
Kindly let em know the possible reasons for getting the below error returned by SQLLDR after loading data:
x no of rows not loaded due to data errors in SQLLDR
Could it be due to issues in control file?you'll find it well explained here :
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/part_ldr.htm#i436326
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/ldr_concepts.htm#i1004846 -
Can any one tell me How to load data in matrix from user table
Hi,
we need to load data to matrix when page loads. After loading data we should add row to that matrix and update the values in database without effecting previous data. It should have functionality like UDO Default Form. Can any help me out in this issue.
Regards,Hi Souji,
try this,
SAPbouiCOM.Form oForm;
SAPbouiCOM.DataTable DBTable;
SAPbouiCOM.DBDataSource dbDatasource;
string strqry;
oForm = SBO_Application.Forms.Item("FormUID");
int i;
SAPbouiCOM.Item oitem;
oitem = oForm.Items.Item("ItemUID");
objMatrix = (SAPbouiCOM.Matrix)oitem.Specific;
objMatrix.AddRow(1, objMatrix.RowCount + 1);
dbDatasource = (SAPbouiCOM.DBDataSourceoForm.DataSources.DBDataSources.Item("TableName");
DBTable= oForm.DataSources.DataTables.Add("UniqueName");
strqry = "paste Query that you want to fetch";
DBTableActivity.ExecuteQuery(strqry);
for (i = 0; i <= DBTable.Rows.Count - 1; i++)
objMatrix.FlushToDataSource();
dbDatasource.SetValue("column1(name)", i, System.Convert.ToString(DBTable.GetValue(0, i)));
dbDatasource.SetValue("column2(name)", i, System.Convert.ToString(DBTable.GetValue(1, i)));
dbDatasource.SetValue("column3(name)", i, System.Convert.ToString(DBTable.GetValue(2, i)));
dbDatasource.InsertRecord(i + 1);
objMatrix.LoadFromDataSource();
If it helps you, give me the reward points.
Thanks
Sravan Kumar Pothu -
How to load data thru flat file in demantra?
Hi,
I am using seeded data model for loading data for DM module in demantra.
As per data model there is 3 staging tables for item, location and sales_data i.e. t_src_item_tmpl,t_src_loc_tmpl,t_src_sales_tmpl respectively.
I have seen the final table for sales data i.e. sales_data table. ther is only one item_id and location_id column against which sales_date and quantity is loaded.
I have same sales_data and quantity to be loaded for different location hierarchy and item hierarchy .
How the data file is created ? if you have any sample data files , can you please share with me ? If any changes needs to be done in data model for loading datardsa in custom hierarchies ?
RegardsWelcome user10979220 to the wonderful forum.
"How many rows will be there in item flat file ?
How many rows will be there in location flat file ?
How many rows will be there in sales data flat file ?"
Answer to these questions are based on the number of sales that has occured as well as the item hierarchy and the product hierarchy.
From the example
Item_name | organization | ship to site | Sales date | quantity
item 1 org1 site1 19-Jan-2008 80
item1 org1 site2 20-Jan-2008 100
I can say that the number of rows in sales data is 2 while that in item file is 1 and location file is 2.
The answer to how the flat file will look is
Item file can have
Item_Id|Item_Name
01 Item1
Location file can have
Org_Id|Org_Name|Site_Id|Site_name
O_01 Organization 1 S_01 Site 1
O_01 Organization 1 S_02 Site 2
Sales file can have
Item_Id|Item_Name|Org_Id|Org_Name|Site_Id|Site_name|sales_date|Quantity
01 Item1 O_01 Organization 1 S_01 Site 1 19-Jan-2008 80
01 Item1 O_01 Organization 1 S_02 Site 2 20-Jan-2008 100
Once you define the data model and load the data it is advisable not to change the data model since the next time when you load the incremental data it will error out due to the mismatching columns. So its better that you define the data model first and then create the files accordingly.
Hence after loading data if you want to view sales data at the product_category1 level then you should already have the product_category1 level defined in the data model.Else You have to create the product_category1 level and associate it in the item hierarchy.Also the sales file should have columns for product_category1.
Then the item file will look like
Item_Id|Item_Name|Product_category1_Id|Product_category1_desc
01 Item1 PC_01 Product_category 1
and the sales file will look like
Item_Id|Item_Name|Org_Id|Org_Name|Site_Id|Site_name|sales_date|Quantity
01 Item1 O_01 Organization 1 S_01 Site 1 19-Jan-2008 80
01 Item1 O_01 Organization 1 S_02 Site 2 20-Jan-2008 100
This is just a basic overview about loading the data into the staging tables.In short the item table should have the item hierarchy in it, the location file should have the location hierarchy in it and the sales file must contain the details about the sales at the lowest item-location level.
Hope I answered your query.
Thanks and Regards,
Shekhar -
SAP BPC 10 NW loading data from Infoprovider (data value issue in BPC)
Hi Experts,
We are on SAP BPC 10 - 801 NW - SP05
We are having an error when loading data from infoprovider, we tested in DEV and QA and have similar behaviour: data values which are stored in infoprovider are loaded into BPC model with no differences.
However after make a transport procedure into PROD environment and then loading data into BPC Model something happens: suppose that 100,00 is a data value stored in a BW infoprovider, after loading data into BPC from this infoprovider, different data value is loaded into BPC. E.G 100,0 is in BW , but 10000,0 is store in BPC
Is there any idea to fix it or check it?
Thanks for your answerHi Giovanni,
This case occurs with colombian currency and others.
Compare the table TCURX in DEV, QA and PRD.
There must be an entry for currency COP only in PRD.
Like
CURRKEY CURRDEC
COP 0
Note 1240163 explain this behavior.
If you need the value to be stored in 100,00 format in BPC, you can create a routine to convert this value. -
"Unable to load data" error after Windows update
Hi all,
I've been maintaining a LightSwitch desktop app for a couple of years now. The app runs on a server and several client machines access it. Sometime in the last few months, any client that has Windows Update enabled has failed to load data. Instead
it shows red crosses where the data should be and the tooltip, "Unable to load data. Please check your connection and try loading again."
Other clients that don't have updates enabled are fine. Has anyone else run into this issue? Does anyone know how to resolve it?
Thanks,
LiamHi Angie,
Thanks for your reply. I've enabled diagnostics as described. Here's what I find.
When I load my LightSwitch screen, I get the following entry highlighted red in Fiddler:
GET http://127.0.0.1:6853/callback.json?_=1377245349573
502 Fiddler - Connection Failed (text/html)
GET http://127.0.0.1:6853/callback.json?_=1377245349573 HTTP/1.1
Host: 127.0.0.1:6853
Proxy-Connection: keep-alive
Accept: application/json, text/javascript, */*; q=0.01
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/29.0.1547.57 Safari/537.36
Accept-Encoding: gzip,deflate,sdch
Accept-Language: en-GB,en;q=0.8
HTTP/1.1 502 Fiddler - Connection Failed
Date: Fri, 23 Aug 2013 08:09:10 GMT
Content-Type: text/html; charset=UTF-8
Connection: close
Timestamp: 09:09:10.584
[Fiddler] The socket connection to 127.0.0.1 failed. <br />ErrorCode: 10061. <br />No connection could be made because the target machine actively refused it 127.0.0.1:6853
After that, I see a long list of each of the queries LightSwitch is calling for all the elements on the screen. Each one contains the following error:
HTTP/1.1 200 OK
Cache-Control: no-cache
Pragma: no-cache
Content-Length: 747
Content-Type: application/msbin1
Expires: -1
Server: Microsoft-IIS/7.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Date: Fri, 23 Aug 2013 08:10:38 GMT
@Fault5http://schemas.microsoft.com/ws/2005/05/envelope/none@Code@Value�Sender@Reason@Textxmllang�en-GB��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@Detail@DomainServiceFaultDomainServices i)http://www.w3.org/2001/XMLSchema-instance@ ErrorCode�@ErrorMessage��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@IsDomainException�
Can you help in interpreting these?
Thanks,
Liam -
When connected to my new Ford Mondeo, my ipod nano can be controlled through user interface in car. This worksd most of the time, but after a while if I try to change the music or search, it comes up with message 'Loading Data'. I then have to pull out USB and reinseert, at which point it works again. Has anyone esle expereinced this/have a solution?
Does not matter if anyone else has this issue. You need to contact the Ford dealership. It's their product you are having problems with.
If you really want to know if anyone else has this issue, post on Ford's Mondeo message boards. It's where the Ford car owners hang out. -
When I attmpt to synch my Iphone I get the following error message. "Itunes was unable to load data class informationfrom synch services. Reconnect or try again later. This started after I uddated to the latest version of Itunes. What should I do?
My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade.
Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down. Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
Still: Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?! Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake).
**banging head on table** -
Change language after load initial data (ME 5.2)
Hello,
we have an ME system installed with german language settings in the Netweaver config tool. We would like to change this english. I found in the installation guide the following remark:
The u2013Duser.country and u2013Duser.language values must be set to the single, supported language
for the SAP ME installation and cannot be modified after initial data has been loaded in SAP ME in
the Loading Initial Data section below. For more information, see your SAP ME consultant.
Can you tell the tables which need to be changed?
Regards,
KaiHi,
You can change language in netwear level SAP Basis people can do that this setting.
Thanks,
Ramesh -
Cannot Load data to ODS after Upgrade
We recently upgraded from BW 3.1 to BW 3.5. After upgarde we are not able to load data from cube to an ODS. As soon as teh package is executed , teh load is complete not finding any records .These are full loads, and there is data in the cube.
But strangely , we have another datamart situation loading data from cube to cube and that works just fine.
Any help is greatly appreciated.HI shai,
Go thru this links it may help u
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6110e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6110e07211d2acb80000e829fbfe/frameset.htm
Hope this helps
Thanks
Sreeni -
Authorisation problem when trying to see the data after loading
HI Everyone,
I loaded data in quality. when i am trying to see the data, i am getting the following messages
1.Your user master record is not sufficiently maintained for object Authorization Object for Plant
2.System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED ZCOPC_C21 ZCOPC_C21
3.System error: RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET ERROR IN RSDRC_BASIC_QUERY_DATA_GET ZCOPC_C21 64
4.System error: RSDRC / FORM DATA_GET ERROR IN RSDRC_BASIC_CUBE_DATA_GET ZCOPC_C21 64
Can any one of you tell whether it is a transport issue or some authorisation problem. Guide me how to solve this.
Thanks in advance for your help.Hi,
After you get this error goto Tcode SU53 and then you'll get the object and activity for that auth object.
You can then go and check if this is enabled in your auth profile using SUIM tcode and going to users.
If its enabled then you need to check for values if you have authorization to display data for that particular plant.
This is an auth issue and you should get approval from the appropriate person in order for you to look at the Master data and then have the Security or Basis team grant you access to the same.
Cheers,
Kedar
Maybe you are looking for
-
SOAP web service: null parameter if namespace not declared in envelope
Hi guys, We are exposing a SOAP web service on WebLogic Portal 10.0. The service has one method which takes a single parameter. The service works correctly if the namespace is declared in the envelope element, but it is unable to map the request corr
-
I have windows XP. It has always automatically become a hyperlink when I hit the space bar after typing it out. I know about the icon in the toolbar that lets me make one, but I don't want to have to do this since I never had to before. I want to mak
-
Can anyone help about updating error-Acrobat 9 Pro
Hi all, I am running Windows Vista Home Premium, SP2. In the past, I have had issues with error 1601 - Windows installer could not be accessed - when trying to update Acrobat 9 Pro. I then uninstalled SP2, and everything updated in Acrobat just fin
-
Can't get the Camera Raw update to 8.3
OK, this happens every time there is an update. I see that Adobe has an update for Photoshop CC, but the Creative Clod Desktop application says it is up to date, which it isn't. Have contacted Adobe support many times Twice today, the Chat people cut
-
External Application without portal ?
Hi all I have several applications built in JSP + BC4J , deployed in Oracle Application Server 10G (9.0.4) , operating system is windows 2000 server. Application server middle tier and infrastruture are in the same server. I have added all applicatio