After Logon on Database Trigger Not Working From Client Terminal

Hi Every One
I Have a Problem, I'am Using Oracle 10g R2, I'd Written After Logon on Database Trigger, I'd Written The Trigger Under The Under The User With DBA Privileges, and it is work Fine, but it is work only when i Logon On The Database from The Server Terminal with any user, and If Logon From any Other Terminal It Is Not Work,
Can any One Know The Reason, Please Help me
Yasser Mokhtar

Please post the trigger code.

Similar Messages

  • DATABASE Trigger not Working

    Dear All,
    I wrote the DataBase Trigger which gets compile but not execute and if i execute the procedure manually then it works.
    CREATE OR REPLACE TRIGGER ficreports.trg_omni
    AFTER STARTUP ON DATABASE
    DECLARE
    PRAGMA AUTONOMOUS_TRANSACTION;
    BEGIN
    Temp_Reporting_Datasync;
    commit;
    END;
    Kindly give your valuable suggestions to start executing the trigger after starting the database.
    Regards,
    Anand

    Yes , if it is fired then it will perform the DML operation on the tables which is mentioned inside the procedure..
    Is there any possiblibility of not firing the trigger or the way of calling procedure is not correct ?
    Kindly confirm.

  • OEM web console is not working from client side

    Hi All,
    I have 2 node RAC environment on windows 2003 server with 11g r1. My problem is on node a "oracle enterprise manager" "https://server-a:1158/em" is not working (node A). Is there any thing that I can do to solve this problem ?
    On node B the url "https://server-b:1158/em" is working.
    Any help would be appreciate.
    Regards,
    Edited by: 53637 on Feb 22, 2011 7:43 PM

    It works as expected, dbconsole runs on only ONE node in the cluster, all agents from this and the other nodes report to this console, statement from documentation:
    In 10.1.x.x, when a DB Control was deployed on a RAC cluster with n nodes, a dbconsole was started on each node of the cluster. Each agent on each node reported to each dbconsole management service on the same node.
    Beginning 10.2.x.x, to improve performance and reduce the workload on the RAC database/instances,when a DB Control is first deployed on a RAC cluster with n nodes, a dbconsole is started only on the node from which the DB Control is deployed. Each agent on each node reports to that same unique dbconsole management service.
    It is however possible to later reconfigure the DB Control to have more than one dbconsole started and to have agents reporting to several dbconsole.
    */

  • Database link not working on client

    All,
    Platform : Linux
    I have created a db link called "TEST_TO_MART " on 11.2.0.1 database which is pointing to another 11.2.0.1 database . Both are resides on same server. I'm getting following error when I'm trying to test.
    SQL> sho user
    USER is "TEST_APP"
    SQL> select * from dual@TEST_TO_MART;
    select * from dual@TEST_TO_MART
    ERROR at line 1:
    ORA-01034: ORACLE not available
    ORA-02063: preceding line from TEST_TO_MART
    Process ID: 3466
    Session ID: 360 Serial number: 16949Target database is up and able to connect without any issues.
    Can you guys suggest me what is the problem?
    Thanks.

    Sorry.  My error and situation seemed so close to this unsolved issue from a year ago, that I didn't copy and paste the details initially.  Here goes:
    oracle@linux99 ~]$ sqlplus
    SQL*Plus: Release 11.2.0.3.0 Production on Mon Aug 12 22:56:33 2013
    Copyright (c) 1982, 2011, Oracle.  All rights reserved.
    Enter user-name: test_dblink_20130812
    Enter password:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> DROP DATABASE LINK "TEST_NOW.MDBT.XXX.COM";
    Database link dropped.
    SQL> CREATE DATABASE LINK "TEST_NOW.MDBT.XXX.COM"
    CONNECT TO APP_UHYDRAST_RW
    IDENTIFIED BY XXXXXXXX
    USING 'mdbt';  2    3    4
    Database link created.
    SQL> select * from dual@TEST_NOW.MDBT.XXX.COM;
    select * from dual@TEST_NOW.MDBT.XXX.COM
    ERROR at line 1:
    ORA-01034: ORACLE not available
    ORA-02063: preceding line from TEST_NOW.MDBT.XXX.COM
    Process ID: 6638
    Session ID: 544 Serial number: 1753
    In listener.ora, we have this (some other DB's are in lower case):
    (SID_DESC =
          (SID_NAME = MDBT)
          (ORACLE_HOME = /ora5/app/oracle/product/11.2.0)
          (GLOBAL_DBNAME = MDBT)
    and, in tnsnames.ora we have this:
    LISTENER_MDBT =
      (ADDRESS = (PROTOCOL = TCP)(HOST = linux99.XXX.com)(PORT = 1522))
    MDBT =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = tcp)(HOST = linux99)(PORT = 1522))
        (CONNECT_DATA =
          (SERVICE_NAME = mdbt.XXX.com)
          (SERVICE_NAME = mdbt)
          (SID = MDBT)

  • Report Conversion Tool in BI 4.1 SP2 not working from Client PCs

    Hi All,
    I am trying to convert some DeskI reports to WebI using report RCT 4.1 SP2. I'm converting the DekI reports in 4.1 direclty to WebI, so my source and destination is always going to be 4.1
    I am able to select the reports to be converted and when I click on the "Next" button on the conversion wizard, the conversion window opens and there is no progress for hours. I'm able to use RCT in the server, but only on the users PC's we are facing it.
    Thanks in Advance.

    Hi Navaladi,
    Sort out whether the problem is only with RCT.
    Check if other clients are working good by connecting to the server and RCT is the only having the problem. As said, the poblem is with all the users, try to check out the Patch that recently installed. On any one of the users box, you can try reparing option for clients tools and check. Check with any simple sample report with no data.
    Rgds
    Niranjan.

  • Autoreaction doesn't work from client 000 but works from other clients

    Autoreaction doesn't work from client 000.
    More details coming.   Having trouble getting the thread to post.

    We set up a new local auto-reaction.   This is not a central auto-reaction.  The auto-reaction writes a
    message to the UNIX system log /var/adm/messages when a "Security"
    alert i.e. - Logon, RFCLogon, TransactionStart, etc.  occurs.
    The RZ20 alerts are being properly generated and can be seen in both
    the CEN system and the local system. On the local system if I view
    all alerts for the MTE using transaction RZ20 and select one of the
    alerts and choose Edit -> Nodes ( MTE ) -> Start methods -> Start auto-
    reaction method. The auto-reaction writes the message to the UNIX
    system log. If I execute the same procedure in client 000 nothing is
    written to the UNIX system log.
    I've also tried triggering a new alert and running SAPMSSY8 from SE38
    while the alert is still in status ACTION_REQUIRED. If I do this from
    client 010, an entry is written to the unix system log. If I do this
    from client 000, nothing is written to the unix system log. In both
    cases, the status of the alert changes from ACTION_REQUIRED to ACTIVE.
    Since the System Cyclic program ( SAPMSSY6 ) that triggers SAPMSSY8
    always runs in client 000, the auto-reaction never writes the messages
    to the UNIX system log.
    I have been working on this issue for days.  There are several posts and notes relevant to a similar situation with e-mail alerts that are not working from client 000 because SAPCONNECT is not set up in client 000.   However, this auto-reaction does not send an e-mail, so SAPCONNECT set-up should not be necessary.   I've searched Service Marketplace and could not find any notes that resolved the problem either.  
    I've also checked CCMS Self-Monitoring and cannot find any alerts or errors relevant to this problem.
    Does anyone know why the auto-reaction only works from a client other than client 000?
    Best regards,
    Dave

  • After upgrading ACS 3.3.1 to 4.2 on windows the local database is not working

    Hi,
    I have upgaded the ACS 3.3.1 for windows server to 4.2. Everything went fine but the local database is not working.
    The CD is an upgrade kit from 3.x to 4.2 on windows. I tried to install directly the 4.2 I was able to install but integration with AD/LDAp is not working. Anysay its an upgrade kit so I cant expect it shoud work when install drectly the 4.2 but by upgrading from 3.3 to 4.2 everything should work fine.
    I followed the upgradation path as recomended.
    Also we have a requirment that once it is upgraded to 4.2 we need to shift the whole thing from the physical server to a virtual machine on VMware ESX server 3.5.
    Can anybody pls guide me if anything else to do after the upgradation.
    Thanks & Regards
    Sachi

    Hi Javier,
    First of all I was facing a problem of restoring the old database of 3.3 to 4.2. Somehow I overcame that issue by following the below steps. Now local authentication is working fine but AD/other External database authentication is not working. As you told the setting for the unknown users are configured to fetch the credentials from the external database if it is not in the local database.
    Do we need to do anything in the AD itself?
    Regards
    Sachi
    Steps for ACS upgrade to 4.2 version
    Below are the requested steps mentioned for the up gradation from ACS 3.3.2 to ACS 4.2.
            1)     Take a configuration backup from existing ACS. ACS--->System
    configuration----> ACS Backup
    2)    now if you have  ACS 3.3.2 on server. take backup of the ACS
    3)   Insert the cd or if you have the set up on the system then  Run the setup of ACS 3.3.4. During the process it will prompt you to
    upgrade existing configuration. Make sure you check that option else we will
    loose the database. Now you need to hit next.next to finish the 3.3.4 upgrade.
    4)     Once you are at 3.3.4, take a backup and keep it handy.
    5)     Run the setup of 4.1.1. During this process it will prompt you to
    upgrade existing configuration. Make sure you check that option else we will
    loose the database. Now you need to hit next.next to finish the 4.1 upgrade.
    6)Once you are at 4.1.1.24 take a backup and keep it handy.
    7)     Run the setup of 4.2. During this process it will prompt you to
    upgrade existing configuration. Make sure you check that option else we will
    loose the database. Now you need to hit next.next to finish the 4.2 upgrade.
    8)     Once you are at 4.2 take a backup and keep it handy. Now run the
    patch 12 and take a backup again.
    9)     Now fresh install 4.2 on your new production server and install patch
    12. Restore the 4.2 patch 12 backup and you should be all set.

  • File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

    File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
    I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
    Thanks

    I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
    Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
    I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

  • Don't work telnet client from ssh session ("%Connections to that host not permitted from this terminal") in 151-4M.

    I changed IOS to 15.1.4M in the ISR router.
    If I connect to console by ssh and  I type  "telnet X.X.X.X YY"  in console then It appear the strange message "%Connections to that host not permitted from this terminal".
    After I  downgraded to  ios 12.4.24 , then it's all work fine .
    configuration line vty :
    line vty 0 4
    transport input ssh
    transport output all
    What it's the problem in IOS 15.1.4M?

    Thank you for answer.
    I've created the access-list :  access-list 20 permit 192.168.200.0 0.0.0.255
    line vty 0 4
    access-class 20 out
    transport input ssh
    transport output all
    IF I try "telnet 192.168.200.2 " - It's working
    But IF I try "ssh 192.168.200.2 " - It isn't working, appear "%  Connections to that host not permitted from this terminal" 
    IF I try from router with IOS  12.4.23 - It's working fine .

  • Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • File sharing is not working from pc to imac os x 10.9.2

    file sharing is not working from pc to imac os x 10.9.2

    Hello there Karen,
    It sounds like you are having to power cycle your modem to get internet back every single day. We can start by troubleshooting your Airport Express to help isolate the issue. I would first perform a Soft Reset, then test the issue again. If needed as a last resort I would then perform a Hard Reset:
    Soft reset
    Connect the device to power and wait for it to complete its start up process. To learn more about the start up process, please see All about Wi-Fi base station Status Lights (LED).
    Press and hold the reset button with a pen, pencil, or straightened paperclip for 1 full second, then release it. The light (LED) will begin flashing amber, indicating that the device is in soft reset mode.
    From the AirPort menu bar item, choose the network created by the device (the network name does not change).
    Open AirPort Utility from Applications > Utilities.
    Select the base station, then click Edit (The Edit window will indicate that the base station is in Soft Reset mode).
    Move through the tabs to make changes to your passwords or other settings as needed, and click Update and Continue as required
    Quit AirPort Utility.
    Hard reset
    Press and hold the reset button with a pen, pencil, or straightened paperclip until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
    Release the button and the device will reset.
    Wait about a minute for the base station to finish restarting, then open AirPort Utility from Applications > Utilities.
    Select the base station from Other Wi-Fi Devices, then click Edit.
    Select the Other Options button.
    Select "Restore previous settings" and click Next until you get to the final window.
    AirPort Utility will indicate that Setup is complete. Click Done.
    Quit AirPort Utility.
    Resetting an AirPort base station FAQ
    http://support.apple.com/kb/ht3728
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Oracle 10g database homepage not working?

    Oracle 10g database homepage not working?
    Hi just i installed oracle database 10g express edition but after the restart the oracle database homepage wont open http://127.0.0.1:8080/apex that link always telling cannot display...
    here i have posted lsnrctl status
    pls help
    thanks in advance
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY…
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
    ction
    Start Date 25-SEP-2010 17:52:11
    Uptime 0 days 1 hr. 28 min. 24 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Default Service XE
    Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\se…
    dmin\listener.ora
    Listener Log File C:\oraclexe\app\oracle\product\10.2.0\se…
    og\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIP…
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOS…
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully

    I had a problem of accessing Oracle 10g database homepage. After a couple of days of research and discussions with coworker we found a solution.
    Here is the solution:
    1. Find out your default browser.
    2. Configure your default web browser to connect to the Oracle Database XE Database Home Page as stated
    here:
    http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHHJEHF
    If this does not help de-install Oracle XE and reinstall following the instruction. During re-installation find out your default browser and configure it as instructed.
    I suspect when the default web browser changes the Oracle 10g XE Database Home Page stops working.
    Good luck

  • XML Query works on one database and not working on others with errLPX-00241

    I have one query as below
    SELECT EXTRACTVALUE
    (VALUE (xml_node),
    '/inspectionActivityArtifact/ns2:landfillTypes/ns2:type[position()=1]',
    'xmlns:ns2="http://dwm.sw.xmlNamespace/InspectionActivity"'
    ) AS TEST
    FROM artifacts a,TABLE (XMLSEQUENCE ((XMLTYPE (NVL (artifact_data, '<empty></empty>'))))) xml_node
    this works well on other databases but not working on one database. Everything is same configuration and OS and everything.
    I can work on other XML parsing which is working fine but not this query.
    Any idea ?
    Viral Dave

    post versions and patch levels for both databases eg 10.2.0.1.0 and the error message you are getting.

  • Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

    Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

    Yes hello,
    My widgets are not working as well, i looked on forms and it seams that the 10.5 update fix there problems. I also did an archive and install from 10.4... One of the major reasons i purchased the upgrade was to use widgets to clip parts of safari, i'am totaly bummed because all forums i find end with the question un answered. i'am a little bummed becuase there are a couple of things that worked with 10.4 that are not working in 10.5 (like some meg moives not playing.
    i do not wish to create a new account because i do not want to reinstall all my software, photoshop, final cut, dvd studio pro.. etc.
    i hope to find the fix some how.
    I have opened up the console application and when i select widgets load or delete them i see no activity in the console. I'am not familiar with the console app. or command lines.
    is there any more info on this matter? is there any support from apple?
    Thankyou

  • Navigation Link not working from save search result

    Hello Experts,
    We have a requirement in our application which is created from scratch, I have implemenetd save search  and its working fine, we have some navigation links in result. these links does not work from save search results moreover it works with normal search.
    Can anybody help me out to achieve it.
    Thanks in advance,
    Madhu Omer

    Hi Madhu,
    If you want to trigger cross-component navigation to an overview page, then the following conditions should be satisfied:
    1. Your last outbound plug calls method fire_outbound_plug( ).
    2. The collection passed in fire_outbound_plug( ) contains two entities - a navigation descriptor as the first entity and a root object of the object you want to navigate to as the second entity.
    In your case, is condition 2 satisfied? You can create a navigation descriptor by calling the following method passing its two mandatory importing parameters as indicated:
    CL_CRM_UI_DESCRIPTOR_OBJ_SRV=>CREATE_UI_OBJECT_BASED(
        EXPORTING
            IV_UI_OBJECT_TYPE = * UI object type of object to which you want to navigate *
            IV_UI_OBJECT_ACTION = 'B'            "for Display
    If you keep debugging the standard outbound plugs, then you will see that at some location, SAP will surely be inserting this navigation descriptor object in the collection as first object in the collection when calling fire_outbound_plug( ).
    If you still can't trigger navigation, please mention the BOL objects you are working with, the component you have created and where you have used it.
    Regards,
    Shiromani

Maybe you are looking for