After much trouble, I finally updated iTunes to 11.1.4 and now Outlook 2010 just shows it's not responding

I had a lot of trouble updating iTunes to 11.1.4 and had to uninstall it and all of its connected programs before I could finally reinstall it. It's working properly now, but Outlook will only partially open. It opens up, but it says "Not Responding" for a very long time and never functions.I can get to my e-mail through Hotmail on the 'net, but I prefer using Outlook and have other e-mail boxes there that I need it for.
I'm on PC running Windows 7. Does anyone know if the install of iTunes could have screwed Outlook up? It was closed when I did the install.
Thanks for any help!

I finally found a solution that worked.
I installed the App "Group SMS" from the App Store. Then I created a new group. Then I added all my addresses manually one by one. And when I then synchronize - all my contacts appeared again in Outlook.

Similar Messages

  • I tried to update my iphone4 to enable iO5 and now my phone just shows itunes plugin picture??

    I tried to update my iphone4 to enable iO5 and now my phone just shows itunes plugin picture??

    Connect it to the charger and let it charge for a while. Then try again. Never upgrade your phone without first connecting the charger. Don't let the battery go dead or the entire device could become disabled.

  • I updated iTunes to 10.4 version and now it doesn't start and sen a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regard

    I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards

    Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
    Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
    Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
    So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver!

  • I updated itunes to version 11.0 and now it will not open and says it is corrupted?

    i updated itunes to version 11.0 and now it will not open and says it is corrupted?
    how do i get it to work it updated fine then asked to restart comp so i did now it will not open

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • HT1222 I just updated iTunes to the latest version and now I can't play more than have of my songs.  Says it can find it and then leasds me to locate it.  I don't know where to look.  Help!!!

    I just updated iTunes to the latest version and now I can't play more than half of my songs.  When I click on a song it comes back and states that it can't find it and prompts me to try and locate it.  I don't know where to look.  Help!!!!

    Hi ldhong,
    There are a few ideas in this article on how and where to look for missing iTunes media:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Hope this helps!
    - Ari

  • I updated iTunes 10.3.1 today, and now it won't let me open itunes it keeps saying error 7 (windows error 14001)  and also says (apple mobile failed to start verify significant privileges to start system services)

    I updated iTunes 10.3.1 today, and now it won't let me openitunes it keeps saying error 7 (windows error 14001)  and also says (apple mobile failed to startverify significant privileges to start system services) I have unstalled it severaltimes, tried repairing it also switched off all security software and checkedall files are deleted in local disk (program file) but still no look. Please cansomeone help 

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
    tt2

  • Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.)  I gave the Airport a hard re-start, so I don't think that is the issue.  Using Windows 7.

    Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.)  I gave the Airport a hard re-start, so I don't think that is the issue.  Using Windows 7 Ultimate

    Looks like I fixed it., thanks to another post I read.  I went into my Norton Security.  Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow"  This also fixed my error (-3212) which would not allow me to connect to the iTunes store. 

  • HT201406 while trying to update my ipod touch  something happened and now my screen only shows the apple logo and nothing else happens

    while updating my ipod touch something happened and now the screen only shows the apple logo that goes on-off. i dont know what to do,please somebody help me!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I just downloaded itunes to my windows xp and now EVERYTHING is abit blurry. Its not a virus.Please help?

    I just downloaded itunes to my windows xp and now EVERYTHING is abit blurry. Its not a virus.Please help?

    I just downloaded itunes to my windows xp and now EVERYTHING is abit blurry. Its not a virus.Please help?

  • Updated iTunes to 10.3.1 and now it won't recognize my iPod

    I recently updated my iTunes to the latest version, and  now it won't recognize any of my apple products. I have a first gen iPod touch, 4th gen. ipod nano and 5th gen. ipod nano. The ipod does work still, and is chargeable through a dock or a AC adapter. I've gone through all of the five Rs and reinstalled itunes, and nothing is working. My ipod won't show up in windows either. When I plug in my 5th gen nano, windows says the driver did not install sucessfully and itunes won't even acknowledge I've plugged it in. Any help would be fantastic, I'd really appreciate it. I put new music on my ipod all the time, and not being able to do so *****.

    Well yesterday I finally broke down and called apple service... I spent $29 and 1.5 hours on the phone, but the operator was finally able to fix my ipod. There was an issue with the itunes update, and it had corrupted. After uninstalling, installing, and updating several drivers, programs, and resolving other issues, my iPod finally works. Even better, the operator gave me a way to contact him again if I am having issues, free of charge. I would have much rather fixed this myself without spending the additional money, but I'll admit there was no way I could've done what he did, as there were certain orders to uninstalling Apple programs. My advice? Bite the bullet and call. They will get your iPad working again. (:

  • Updated iTunes to 10.4.1 and now everytime I try to sync my iPhone 4 it crashes... what can I do?

    I updated my iTunes to 10.4.1 and now everytime I try to sync my iPhone 4 the program crashes and I cannot finish the process. It starts to sync without trouble, it finishes step 3 and syncs ok contacts, calendars, markers, notes but when it starts to sync the music it crashes I get a window that gives me this information:
    Nombre del evento de problema: APPCRASH
    Nombre de la aplicación: iTunes.exe
    Versión de la aplicación: 10.4.1.10
    Marca de tiempo de la aplicación: 4e4e1904
    Nombre del módulo con errores: QuickTime.qts
    Versión del módulo con errores: 7.70.80.34
    Marca de tiempo del módulo con errores: 4e13ba08
    Código de excepción: c0000005
    Desplazamiento de excepción: 00146b30
    Versión del sistema operativo: 6.0.6002.2.2.0.768.3
    Id. de configuración regional: 2058
    Información adicional 1: fd00
    Información adicional 2: ea6f5fe8924aaa756324d57f87834160
    Información adicional 3: fd00
    Información adicional 4: ea6f5fe8924aaa756324d57f87834160
    Is this normal in this version? What can I do? Or should I just wait for anew version of iTunes?

    i have had the same problem, souonds like a version issue, anyone know how to fix this issue?

  • I just updated Itunes to the newest version and now my entire song library is saying 'can't play this song because original file can't be found'.  ***??

    I have no idea what happened!?  I just updated Itunes on my macbook and now my entire song library won't play.  When I click on a song it says it can't play because it can't find the original file.  How is this possible?  The original files are on my computer.  I just upgraded!! HELP!!

    The only thing I can think of is that you deleted these files off your computer without using iTunes to do it. Or maybe you backed up your computer to a previous state to where these song files didn't exist? The last one doesn't even make sense to me unless you used Time Machine to do it. But those are the only things I can think of.

  • I updated iTunes to 11.1.4 and now my iPhone 4S won't show up in iTunes.

    I updated iTunes on my laptop to 11.1.4 and now my iPhone 4S won't show up in iTunes.  I have WIndows 8.  My iPhone shows up there, just not in iTUnes as a device.

    https://discussions.apple.com/message/24636376#24636376
    gck55
    Jan 25, 2014 6:00 AM (in response to rcpalladino)
    Windows 8.1, 64bit
    It appears that the 64bit install messed up the device drivers for the Apple mobilie devices connecting as USB.
    I tried many things, I may have missed a step below.  But the following is what I believe was the fix - since it worked on a 2nd PC.
    Make sure you are using an administrator account.  Any of them on your machine will do for the following
    a) Get Windows to restart the drivers:
        - disconnect your USB device and close ITunes
        - connect your USB device
        - if ITunes loads, close it.
    b) File explorer:
    Open File explorer and browse to
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    In that folder there should be a set of files named "usbaapl64...."
    right click on the one ending in "INF"
    Select Install.  It's very quick.
    remove the USB device
    c) Restart the computer.
    When you login again, load ITunes before you attach your USB device.

  • Updated itunes to 12.1.1 and now its stopped working

    I just updated iTunes to 12.1.1 on my laptop as it prompted me to and now it just wont work if it loads at all it becomes unresponsive when i try to connect ipad or iphone.
    I have uninstalled it and reinstalled it and it still the same i cant seem to go back to the old version so im now stuck on what to do.
    Any ideas
    Thanks

    Good Afternoon sjwoods83,
    The resources below will help troubleshoot the issue you are having with iTunes for Windows being unresponsive since the software was upgraded.  You may need to uninstall other components in addition to the actual iTunes application.  It's also possible that antivirus software may be affecting iTunes.  Click on the link below for complete details.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    http://support.apple.com/en-us/HT203206
    I hope this information helps ....
    - Judy

  • I just updated the software on my 3GS and now, my apps just open quickly then close....what should i do?

    I just updated my software, and now my apps won't work.  They just open the close quickly....I've done a force quit, but it stills doesn't work!  What can I do?

    Have you tried a reset?
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

Maybe you are looking for

  • Stack Explodes when i try to run the application

    Hi all, First of all let me tell you that i am very new to the concepts of JSP/ JSF and so on. And that i have searched for answers via google and within this forum but was unsuccessful. The application is based on the tutorial that is available here

  • Why is the sound quality and volume in itunes so different than when I use other media players

    This is an issue which has been vexing me for some time. I've researched it all over the web and have not found a worthwhile answer. Some other posts on these forums have asked similar questions without successful answers. But, none the less, I will

  • ECM- Budget Creation, Error type: TH_RES_FREE

    Hi, I am trying to create a budget in ECM. When trying to Save the created budget i am getting the followin error. The following error text was processed in the system XXX : Error sending data, session terminated The termination type was: TH_RES_FREE

  • How to draw a dynamic box in sapscript?

    Hello experts, I am currently facing a problem wherein in the main window I have multiple line items. What I want to do is that for every new line item, I would draw a box and so on...for example: BOX 1 BOX 2 BOX 3 Here is the attributes of the main

  • Exporting a report with group in crystal report

    Hi all, I am new to crystal reports XI. I have designed a report in which I have created 2 groups. The structure of report is shown below. MAIN REPORT: Status           1st     2nd 3rd A               10      20   30 B               40      50   60 W