After processing sender file is not deleting

Hi All,
I have configured the File-JDBC-File sync mode. the scenario is working fine upto last 2 days. but the problem is once the file picks and process its not deleting or archiving the file. but scenaio is working fine when i check in sxmb_moni but the error in sender file adaptor.
Could not delete file 'abc.dat' after processing: java.net.SocketException: Broken pipe.
in FTP server i have delete rights the other test scenario are working fine with out any error.
Please help me to reslove this issue.
Thanks,
Venkat

yes the processing mode is delete for sender communication chennal.
I have created the other test scenario to test the processing mode is delete its working for other communication chennal. and my scenario also worked upto last 2 days. i have done delta cache and also created the new communication chennal even no luck.
00:06:47 Success The message status set to DLNG.
22.04.2009 00:22:42 Success The application sent the message synchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
22.04.2009 00:22:42 Success The message was successfully transmitted to endpoint http://SAPRtest.test.com:8047/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System.
22.04.2009 00:22:42 Success The message status set to DLVD.
22.04.2009 00:23:12 Error Attempt to delete file "abc.dat" after processing failed. Retry
Please help me to reslove this.
Thanks,
Venkat.

Similar Messages

Could'nt delete file after processing sender file in windows environment ?

Hi,
I have problem with sender file adapter in windows 2003 server, because the file adapter cannot delete the file after processing, seems like permission problem. but then i have set full controll access to the pi7adm (sap instance admin). but the problem still persist.
Please advise, me.
Thank you and Best Regards
Fernand

Hi,
Of course i set delete option in my CC sender, but the fail adapter couldn delete fail without any reason ?
This is the error message from RWB Could not delete file 'K:\WORKDIR\FTP\data\data1.fer1' after processing.
like i mention before i have set full access to sap admin user to the directory. but the error still persist.
any idea.
Cheers
Fernand

Sender File adapter not deleting the source file after reading

Hi everyone,
In the sender Communication channel i have choosen the "Delete" option after reading the source file. But it is reading the file, but it is not deleting the file. I have checked the file status. it is with full persmission.
can anyone give solution to this.
Thanx
Bala

Hi,
1. set the mode to delete
2. make sure the file is "deletable"
3. check xiserver:port/MessagingSystem/monitor log to see what happens with the file
(chec both audit and log in that link)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

HT3275 Is it possible to delete older backups manually? I have tried and the files will not delete (Files remain in trash when emptied)

Is it possible to delete older backups manually? I have tried and the files will not delete (Files remain in trash when emptied)
I am Backing up to a Lacie HD 1tb.
I also use the drive to store Current work on as well as my Time Machine Backup.
Thanks!

Read the following link to get a clearer idea on how to approach trash problems.
Solving Trash Problems and this is a link to download Trash it.
Download Trash It! for Mac

Excel file is not deleting from server

Hello expert,
 I am creating excel file using jxl and in that file i am inserting table data. now the problem is that file is not deleting from the server.please give some suggestion so that i can delete from server .
Thanks and Regards
Kumar Rakesh.
IWDCachedWebResource cachedExcelResource = null;
 try
 String date = DateConvert(new Date(System.currentTimeMillis()).toString());
 String user_ex_form= wdContext.currentContextElement().getUser_excel_cfrom();
 String fileName = "CFormStatus"dateuser_ex_form+".xls";
 File f = new File(fileName);
 WritableWorkbook workbook = Workbook.createWorkbook(f);
 WritableFont red = new WritableFont(WritableFont.ARIAL, WritableFont.DEFAULT_POINT_SIZE, WritableFont.NO_BOLD, false, UnderlineStyle.SINGLE, Colour.RED);
 WritableCellFormat redFormat = new WritableCellFormat(red);
 WritableFont blue = new WritableFont(WritableFont.ARIAL, WritableFont.DEFAULT_POINT_SIZE, WritableFont.NO_BOLD, false, UnderlineStyle.NO_UNDERLINE, Colour.BLUE);
 WritableCellFormat blueFormat = new WritableCellFormat(blue);
 WritableSheet sheet = workbook.createSheet("C Form Status", 0);
workbook.setColourRGB(Colour.LIME, 0xff, 0, 0);
 workbook.write();
 FileInputStream excelCSVFile = new FileInputStream(f);
 cachedExcelResource =getCachedWebResource(excelCSVFile,fileName,
 WDWebResourceType.getWebResourceType("xls","application/ms-excel"));
 wdContext.currentContextElement().setRESOURCE(cachedExcelResource);
 workbook.close();
 f.delete();

Hi,
I just worked on same functionality where i used a button to create excel file with context data and save in local system.
Use the following code under a button, So on click of button you can directly get the excel file saved in to your desktop without saving on the server
String ordcaeno="000"sysdate".XLS";
String str = "";
for(int j = 0; j< wdContext.nodeZflash_File().size(); j++)
str =str"\n" wdContext.node<<ABC_File().getABC_FileElementAt(j).getRecord();
try
IWDCachedWebResource resource = WDWebResource.getWebResource
str.getBytes("UTF-8"), WDWebResourceType.UNKNOWN
resource.setResourceName(ordcaeno);
IWDWindow window = wdComponentAPI.getWindowManager().createNonModalExternalWindow(resource.getUrl(WDFileDownloadBehaviour.ALLOW_SAVE.ordinal()),
resource.getResourceName());
window.show();
catch(Exception ex)
wdComponentAPI.getMessageManager().reportException( new WDNonFatalException(ex), false );
Regards
Raghu

TPS file is not deleted after FrameMaker creates PDFs via Acrobat 8

Using FrameMaker 7.2 build 158, and Adobe Acrobat 8, when creating PDF files, the temporary PostScript file (*.tps), which is created before the final PDF, is not deleted after the creation of the PDF is complete.
This is a big deal for us because we are using a tool which hooks into the PDF-creation of FrameMaker/Distiller, and is reliant on this TPS file being deleted.
Is this a known bug? Does Adobe know about this? Do any other users have workarounds for this?

Thomas,
FWIW, speaking from experience with the Save As route, I've seen
random "phunnies" in the final PDFs (such as the missing fonts
issues), a bigger .tps file than the .ps file generated from directly
printing to file, slower throughput in both the intermediate
postscript file creation and actual distilling (probably tied in to
the larger .tps file) and other differences from what the joboptions
should have been.
There should not have been any differences in the file sizes being
created if the same printer instance/configuration was actually being
used. I also see this on some automated runs with Miramo. It's not
consistent either - sometimes it works fine and then the next run, the
process is considerably slower and there are dropouts in the PDFs.
So far, manually printing to a ps file and distilling always seems to
work without any issues.
Your mileage may vary.
Arnis

Files are not deleted after auto export

Hi folks,
I am using Oracle UCM 11gPS6 in Redhat Linux 5 OS.I have set automatic export based on certain docType.While setting this export,I have marked "Delete files after revisions".
But when I automate this process,files are not getting deleted.
Am I missing something or is this feature not available in this product?
Any help will be appreciated.
Regards,

Haven't you asked the same thing in the thread Re: Setting of automatic replicator ?

Production issue - Sender File adapter not picking up the files from folder

Hi Guys,
Ever since the upgrade from XI 3.0 to PI 7.1, we have come acrossinstances of weird error.
Thsi time again - now the 3rd time - tandom basis, in our production PI server, we have teh file slying in the source directory folder in the server.
I can see the files lying there in AL11.
However, it looks like that the file polling has just stopped and the channel is going blank in channel monitoring.
I have checked in SXMB_MONI and there are no messages since the morning.
I have tried craeting a replica of the current channel but it is not working.
This is teh production server and thsi has alraedy created production issues.
I ahve checked in the SDN forum but am not able to find the details.
Plaese help me.
I am anyway going to raise the issue with SAP now.
Regards,
Archana
<REMOVED BY MODERATOR>
Edited by: Prateek Raj Srivastava on Jun 8, 2010 4:50 PM

Hi Prateek,
I have trying all sorts since the morning and then just checked teh file permissions.
The file permissions were incorrect as compared ot the other files that were processed successfully today.
Somehow the permissions were changed on the server and the interface channel was not able to poll the files.
I got teh permissions changed back to 666 and all the files were pikced up in a minute.
I got the folder checked and it seems like that the permissions were changed somewhere very early in the morning and we are trying to find out how it happened and who did that.
However, another question i had - this sender file adapter was polling the source directory and deleting the files from there.
I would have expected that if the channel had issues with the file permission because of which it was not able to access the file, it would have thrown an error something like the file permissions error.
But there was not a single error in the channel monitoring.
How can we configure it in a beter way so that we at least soem kind of error indication?
Please advice.
Regards,
Archana

Sender File Adapter not picking up the file

Hello Experts,
I have configured a sender file (FTP) adapter. All the configurations are right. The name of the file is given exactly as it is. The processing mode is Delete.
The scenario was running fine till today. I only made changes to the path from which it has to pick the file. I have checked the path numerously and it is correct.
But the file is not being picked up.
Monitoring the communication channel shows no errors. It has the green indicator. No idea what is happening.
Please Help,
Regards,
Merrilly

Hi
try to make some changes anf then again save and cativte the adapter. may be the adapter is not being activated.
also check whether the cache is refreshed or not.
or u can also check in the communication channel monitoring the channel is start or stop. if stop then start the channel and then try again.
if u still face the problem please reply me back.
Thanks
Rinku

File was not deleteing in my file adapter

Hi,
in my File adapter (sender side) is not working fine.. if i put the processing mode is 'DELETE' my adapter is not working.. if i put the processing mode is 'TEST' then my file is polling and outfile was generating.. why this was happending..
if keep processing mode is 'delete' then the file is polling but it was not deleting so, output also it was not generating... .. for what reason it was happening..
Thanks
babu

Hi Babu,
You must be using some user for accessing the file system for picking up tht file...
Check if the user has Delete access to the folder.
(You can set this property in the FTP Server UI)
Regards,
Sushil.

Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Sender file adapter not polling the file

hi all,
i have configured a filexifile scenario....
but the file sender adapter is not polling the file at all....
i dont c any message either in RWB or in SXMB_MONI
i checked the adapter framework url at http://<ximachine>;<port>/AdapterFramework....and the status for the file adapter is green...
but the message it gives there is
Sender Adapter v1014 for Party '', Service 'TASL_FILE_SENDER':
Configured at 03:07:24 2006-02-02
Up and running - no message processing until now
last poll interval started 04:01:24 2006-02-02
length 60,000 secs
y is the sender adapter not polling the file..
i am using NFS as my File System....i gave the source directory as d:/test_dir/
is this way of specifying the source directory on a windows machine correct...
thanks
pavan

There is probably something wrong with the File Adapter. You will need to go to the RunTime Workbench >> Component Monitoring >> Display >> Click on the Adapter Engine >> More information will display and click on the button 'Adapter Monitoring' >> A new window will display and click on the arrow next to your adapter engine. This displays a list of adapters running on your system. Green light means good; Red, you have a configuration problem. Look at the error and try and resolve it.

Sender File Adapter Not Showing in Decentral Adapter Engine

Hi,
We have recently implemented a Decentral Adapter Engine on a windows box. The adapter engine seems to be working fine because my adapters show and seem to work fine in it.
However, when I define a Sender File Adapter that uses File Content Conversion message protocol instead of just File messaeg protocol, the adapter does not show up in the decentral adapter engine.
I made sure that Adapter Engine parameter in the Sender File Adapter shows the new adapter engine but that does not seem to be working. If change the Adapter Enginer parameter to show the Central Adapter Engine, then I can see the Sender File Adapter on the Central Adapter engine and it works fine. (Note: The Central Adapter Engine is installed on a Unix box)
Here are the paramters I defined for the Sender File Adapter:
- Transport Protocol: File System (NFS)
- Message Protocol: File Content Conversion
- Adapter Engine: (new Adapter Name)
Source Directory: (
server/drive/path)
File Name: purchaseOrder.txt
Quality of Service: Exactly Once
Poll Interval (secs): 60000
Poll Interval (msecs):
Retry Interval (secs):
Processing Mode: Archive
Add Time Stamp (checked)
Archive Direcotry: (
server/drive/path/archive)
Process Read-Only files: (not checked)
Processing Sequence: By Name
Fiel Type: Text
File Encoding:
Operating System Command:
Additional Files (not checked)
Content Conversion Parameters
Document Name: MT_Request_File_Data
Document Namespace: http://nxy.tots/fg_admin
Document Offset:
RecordSet Name: Purchasing
RecordSet Namespace:
RecordSet Structure: Purchase_Record,*
RecordSet Sequence: Ascending
RecordSets per Message: 1
Key Field Name:
Key Field Type: String(Case-Insensitive)
Purchase_Record.fieldFixedLengths: 8,4,2,10,10,12,18,12
Purchase_Record.fieldFixedType: char
Purchase_Record.fieldNames: Request_Action,Request_PO_Num,Request_PO_LN,Request_PO_Date,Request_Purchasing_Org,Request_Purchasing_GName,Request_Created_By,Request_Vendor_Name
Purchase_Record.fileContentFormatting: trim
Adapter Status: Active
Advanced Mode: (not checked)
Your help is much appreciated.

Hi Alaa,
look into this document:
http://service.sap.com/nw-howtoguides -> Exchange Infrastructure -> Troubleshooting: Adapter Engine 3.0 (Expert Call slides)
If the File Adapter works without conversion, then you should count the number of fields in a row. If it differs from the configuration, then it runs on error.
Another idea is to check the content type of the file. When you do not enter a File Encoding, then the file adapter assumes utf-8. If the file is for example latin-1, then the number of characters in a row are not counted correctly.
Regards
Stefan

Sender file is not read all the records

Hi Experts,
we got file to file scenario in production, sender file adapter did not read whole file, it did pick up some of the records only insted of whole file.
Can anyone please suggest me why sender file adapter pick some of the records only.
Kind Regards,
Praveen.

Praveen
Try increasing the value for parameter Msecs to Wait Before Modification Check .Ideally this parameter starts polling once your standard poll is over and checks if file size has changed. Incase its changed it further polls and keeps doing so until file size remains constant(meaning file modification is over).
Did you try out the other alternative? Using a script to place the processed files to a separate folder and pointing your fileadapter to the same.
Or
As fariha suggested you can check the application responsible for putting the file in the server location. Giving it a seperate name as long as its processed like *.tmp or something and you can use exclusion mask in sender file adapter to avoid processing of the *.tmp file.
Regards
Soumen...

Exstream engine breaks after processing 5 file consecutively

I am facing issues with HP exstream software. The engine breaks after processing files, the software works fine only after restarting. Please help me in fixing this issue.

@Jothilingam
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

After processing sender file is not deleting

Similar Messages

Maybe you are looking for