Sender file is not read all the records

Hi Experts,
we got file to file scenario in production, sender file adapter did not read whole file, it did pick up some of the records only insted of whole file.
Can anyone please suggest me why sender file adapter pick some of the records only.
Kind Regards,
Praveen.

Praveen
Try increasing the value for parameter Msecs to Wait Before Modification Check .Ideally this parameter starts polling once your standard poll is over and checks if file size has changed. Incase its changed it further polls and keeps doing so until file size remains constant(meaning file modification is over).
Did you try out the other alternative? Using a script to place the processed files to a separate folder and pointing your fileadapter to the same.
Or
As fariha suggested you can check the application responsible for putting the file in the server location. Giving it a seperate name as long as its processed like *.tmp or something and you can use exclusion mask in sender file adapter to avoid processing of the *.tmp file.
Regards
Soumen...

Similar Messages

I have my Dad's apple ID etc, but he has an iphone and i have an Ipod Touch then on IMessage i can read all the messages he recieves and sends and he can read all the messages i send and recieve how do i stop this?

Hi
I have my Dad's apple ID etc, but he has an iphone and i have an Ipod Touch then on IMessage i can read all the messages he recieves and sends and he can read all the messages i send and recieve how do i stop this? But i still want to send messages to him.
Thank You

. You do not need a seperate Apple ID. One one device you just need to go to Settings>Messages and add another/different Messaging email address and delete the common Apple ID address. Also see:
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

Sender File Adapter not picking up the file

Hello Experts,
I have configured a sender file (FTP) adapter. All the configurations are right. The name of the file is given exactly as it is. The processing mode is Delete.
The scenario was running fine till today. I only made changes to the path from which it has to pick the file. I have checked the path numerously and it is correct.
But the file is not being picked up.
Monitoring the communication channel shows no errors. It has the green indicator. No idea what is happening.
Please Help,
Regards,
Merrilly

Hi
try to make some changes anf then again save and cativte the adapter. may be the adapter is not being activated.
also check whether the cache is refreshed or not.
or u can also check in the communication channel monitoring the channel is start or stop. if stop then start the channel and then try again.
if u still face the problem please reply me back.
Thanks
Rinku

Vertical scrollbar not showing all the records when I scroll down.

Vertical scrollbar not showing all the records when I scroll down.
Using Oracle forms 10g , operating system windows
I have two fields with number of items dispayed = 15.
I have a vertical scroll bar with them. There are 34 records in the table but the scrollbar only shows 15 records.
Here are the properties for block / scrollbar.
WORK_CATEGORY
- Subclass Information
- Comments
* Navigation Style                                Same Record
- Previous Navigation Data Block
- Next Navigation Data Block
- Current Record Visual Attribute Group
- Query Array Size                                0
- Number of Records Buffered                      0
* Number of Records Displayed                     60
* Query All Records                               No
- Record Orientation                              Vertical
* Single Record                                   No
- Database Data Block                             Yes
- Enforce Primary Key                             No
- Query Allowed                                   Yes
- Query Data Source Type                          Table
* Query Data Source Name                          WORK_CATEGORY
* Query Data Source Columns
* Column Name                                   JOB_TYPE
* Column Type                                   VARCHAR2
- Column Type Name
- Parent Column
* Length                                        30
* Precision                                     0
* Scale                                         0
* Mandatory                                     Yes
* Column Name                                   WORK_CATEGORY
* Column Type                                   VARCHAR2
- Column Type Name
- Parent Column
* Length                                        30
* Precision                                     0
* Scale                                         0
* Mandatory                                     Yes
- Query Data Source Arguments
- Alias
- Include REF Item                                No
* WHERE Clause
* ORDER BY Clause                                 job_type
- Optimizer Hint
- Insert Allowed                                  Yes
- Update Allowed                                  Yes
- Locking Mode                                    Automatic
- Delete Allowed                                  Yes
- Key Mode                                        Automatic
- Update Changed Columns Only                     No
- Enforce Column Security                         No
- Maximum Query Time                              0
* Maximum Records Fetched                         0
- DML Data Target Type                            Table
- DML Data Target Name
- Insert Procedure Name
- Insert Procedure Result Set Columns
- Insert Procedure Arguments
- Update Procedure Name
- Update Procedure Result Set Columns
- Update Procedure Arguments
   Don't know where am I going wrong. I'll really appreciate if you can help me in this.
Thanks.
Edited by: 831050 on Sep 14, 2011 8:05 AM

One of the items is a list item.. here are it's properties:
* Name                                          JOB_TYPE
* Item Type                                     List Item
- Subclass Information
- Comments
- Help Book Topic
- Enabled                                       Yes
* Elements in List
* Label
* List Item Value                             LIST20
* List Style                                    Combo Box
- Mapping of Other Values
- Implementation Class
- Case Restriction                              Mixed
- Popup Menu
- Keyboard Navigable                            Yes
- Mouse Navigate                                Yes
- Previous Navigation Item
- Next Navigation Item
- Data Type                                     Char
- Data Length Semantics                         Null
- Maximum Length                                30
- Initial Value
* Required                                      Yes
* Copy Value from Item
- Synchronize with Item
- Calculation Mode                              None
- Formula
- Summary Function                              None
- Summarized Block
- Summarized Item
- Current Record Visual Attribute Group
- Distance Between Records                      0
* Number of Items Displayed                     15
- Database Item                                 Yes
* Column Name                                   JOB_TYPE
- Primary Key                                   No
- Query Only                                    No
- Query Allowed                                 Yes
- Insert Allowed                                Yes
- Update Allowed                                Yes
- Update Only if NULL                           No
- Visible                                       Yes
* Canvas                                        CANVAS2
- Tab Page
* X Position                                    47
* Y Position                                    137
* Width                                         187
* Height                                        18
- Visual Attribute Group                        DEFAULT
- Prompt Visual Attribute Group                 DEFAULT
- Foreground Color
* Background Color                              white
- Fill Pattern
- Font
* Font Name                                     Tahoma
* Font Size                                     10
* Font Weight                                   Demilight
* Font Style                                    Plain
* Font Spacing                                  Normal
* Prompt                                        Job Type
- Prompt Display Style                          First Record
* Prompt Justification                          Start
* Prompt Attachment Edge                        Top
- Prompt Alignment                              Start
* Prompt Attachment Offset                      10
* Prompt Alignment Offset                       0
- Prompt Reading Order                          Default
- Prompt Foreground Color
- Prompt Font
* Prompt Font Name                              Tahoma
* Prompt Font Size                              10
* Prompt Font Weight                            Bold
* Prompt Font Style                             Plain
* Prompt Font Spacing                           Normal
- Hint
- Display Hint Automatically                    No
- Tooltip
- Tooltip Visual Attribute Group
- Direction                                     Default
- Initial Keyboard State                        Default
- Keyboard State                                Any

I am not geting all the records in TCRT for a perticular sequnce number ?

Hi All,
I not geting all the recotrds in TCRT table what ever the records i can see in transaction : PC_PARESULT for a perticular employee of perticular sequence neumber.
My code is like this : for the cumyr = '2008' i am geting values but cumyr = '2007' i am not geting values . But actually records exist for that condition as i see through PA_PCRESULT.
cd-key-pernr = pernr-pernr.
rp-imp-c2-cu.
SORT rgdir BY paydt DESCENDING.
LOOP AT rgdir.
CHECK: rgdir-paydt BETWEEN p_detryr_low AND
                               p_detryr_high,
    rx-key-pernr = cd-key-pernr.
    UNPACK rgdir-seqnr TO rx-key-seqno.
    rp-imp-c2-ru.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
LOOP AT tcrt WHERE lgart = '/303' AND
                         ctype = 'Y' AND
                         taxau = 'FED' AND
                         cumyr = '2008'.
    v_betrg 1= v_betrg + tcrt-betrg.
ENDLOOP.
LOOP AT tcrt WHERE lgart = '/303' AND
                         ctype = 'Y' AND
                         taxau = 'FED' AND
                         cumyr = '2007'.
    v_betrg 2 = v_betrg + tcrt-betrg.
ENDLOOP.
     Thanks ,
Suresh.

You may not expressly be using all the RAM in your machine but OS X will, whether you know it or not.
Each time you read a file from disk, whatever was read is cached by the system; when the file or program is no longer in use, the memory is marked free for the system to recover for other purposes but as long as it remains in memory the next time you need to access that disk information it's simply read from memory.
The more RAM, the more disk data is kept around and the faster your machine will operate until that memory needs to be recovered or you reboot (or otherwise flush the disk cache.)

Reading all the records

Hi sir,
I developed one review page using jsp techonology, and with the help of servlet i get connected to the database, where i wrote code for both inserting the record and selecting the record at a time, but problem is only one record is displayed in the review jsp page. Though i used "while(rs.next())".
1. I think first of all , all the records should be stored to an object, then it should be displayed to jsp page.
but how it can be done, plz help me out. its an urgent, i need to complete this application soon.
regards

problem is only one record is displayed in the review jsp page. Though i used "while(rs.next())".How many records were retrieved in the 'while (rs.next())' loop?
plz help me out. its an urgent, i need to complete this application soon.Your time management problems are your own. If you need urgent help, hire it. This is a user to user forum, nobody gets priority.

.ear file is not including all the required files for deployment

While deploying from JDeveloper, some of the files (eg. <Project>.cpx file, .class file) are not included in the .ear file.
Pls help.

Is the .ear file deployed with the Deploy to EAR file selection?

Database adapter not returning all the records

I've taken over a BPEL from a developer who left the organization and have been having an issue during our User Acceptance Testing. We are querying a table that will return the insurance enrollment information for employee's and their dependants. When an employee change plans, or adds people, the old plan is terminated and a new once is created. When this happens there will be two records on the database to show the old plan and the new plan.
When we run the SQL thru JDEV or SQLDeveloper, the data comes out fine. When we run it through a BPEL Database Adapter we are only getting one of the rows returned.
I have created a small tester BPEL that is easily modified and deployed to run the same query to try multiple configurations changes within the DBAdapter. What I have found is all the records are returned when the "Return single result set" box on the DBAdapter Wizard is unchecked. When it's checked then it only returns one record for the employees with an old and a new plan.
Can someone explain what the "Return single result set" option does, and what the impact will be if it's unchecked?

Hello,
In same way i am using two parent-child(header-line) tables. they have one to many relationship.
I want to generate XML which contains multiple line items under a child elements for header elements.
I have tried it but i am getting only one line under that child item. i am using jdev10.0.3.3.0
can u help me please.
-regards
satyendra

AE not reading all the XMP data from DNG files

I'm working on a very large time-lapse for a construction company - I have a sunset that is broken between two folders and rendering the folders seperately makes Quicktime unhappy during playback and I get an ugly jump in sunset exposure.
So I combined the two folders in Lightroom (LR) from my RAW files (NEF) and exported the entire sequence as DNG files with simpler numbering. The sequence is about 1560 files and constitutes about 22 GB of data. I created a new LR library from the DNG sequence to make sure it all looked good and it does.
I imported the same DNG sequence into AE, checked a few frames in the preview and sent it out to render. Two thirds of the way through the QT movie, exported in H.264 at 30 fps, I start seeing problems. Huge sections look like the XMP data has not been read, then there's a good section and then bad again. I matched the movie time to preview in AE and indeed saw the same problems in the AE preview. So the problem begain in AE's reading the files from the folder, not in rendering.
I went back to LR for file comparison. There was no problem in LR. All the DNGs look great.
I'm on a MacBookPro Retina with 2.8 GHz Intel processor, 16GB 1600 MHz DDR3 Ram and NVIDIA GeForce GT 650M 1024 MB graphics
I have the standard 69GB cache on an external drive and have 11GB RAM available for AE.
Installed CPUs =8
CPUs reserved for other apps = 2
RAM allocation per background CPU = 1GB
Actual CPUs that will be used = 6
I have the latest AE from the Adobe Cloud, although I haven't done the most recent update yet.
My thought was to break the folder up into smaller segments for rendering, but that's not the problem. I see the XMP hasn't been consistantly read in preview. To me it doesn't make sense that the folder is too large for preview because it's not even rendering it there, just reading the files...?
Any insight, solutions?
Thanks,
Dennis

Moominman wrote:
I am basically trying to export xmp files from a set of low resolution dng files so that I can access my Lightroom edits in the RAW files. I have separated the RAW and dng files in different folders
Hi Andy,
I dunno how best to get extracted xmp files into the raw folders, but if you are comfortable with exiftool, you can use it to extract xmp sidecars from DNG files.
If you want a turn-key solution which does not required you to futz with exiftool, then consider a free plugin I wrote:
robcole.com - xEmP
It will allow you to create xmp sidecars with all your DNG adjustments and metadata (which can then be applied to the non-dng raw files).
However, if you won't need the DNGs in your catalog afterward, then the easiest way is to convert them back to proprietary raw format using this plugin (also free, and I wrote it):
robcole.com - UnDNG
Conceptually, you can think of it as converting the DNGs to proprietary raw format, but note: it doesn't convert anything, it just allows existing raw files that are NOT in the catalog, to replace the DNGs that are in the catalog. All adjustments and metadata and everything else will be preserved (just like when you convert a proprietary raw to DNG format).
Rob

Production issue - Sender File adapter not picking up the files from folder

Hi Guys,
Ever since the upgrade from XI 3.0 to PI 7.1, we have come acrossinstances of weird error.
Thsi time again - now the 3rd time - tandom basis, in our production PI server, we have teh file slying in the source directory folder in the server.
I can see the files lying there in AL11.
However, it looks like that the file polling has just stopped and the channel is going blank in channel monitoring.
I have checked in SXMB_MONI and there are no messages since the morning.
I have tried craeting a replica of the current channel but it is not working.
This is teh production server and thsi has alraedy created production issues.
I ahve checked in the SDN forum but am not able to find the details.
Plaese help me.
I am anyway going to raise the issue with SAP now.
Regards,
Archana
<REMOVED BY MODERATOR>
Edited by: Prateek Raj Srivastava on Jun 8, 2010 4:50 PM

Hi Prateek,
I have trying all sorts since the morning and then just checked teh file permissions.
The file permissions were incorrect as compared ot the other files that were processed successfully today.
Somehow the permissions were changed on the server and the interface channel was not able to poll the files.
I got teh permissions changed back to 666 and all the files were pikced up in a minute.
I got the folder checked and it seems like that the permissions were changed somewhere very early in the morning and we are trying to find out how it happened and who did that.
However, another question i had - this sender file adapter was polling the source directory and deleting the files from there.
I would have expected that if the channel had issues with the file permission because of which it was not able to access the file, it would have thrown an error something like the file permissions error.
But there was not a single error in the channel monitoring.
How can we configure it in a beter way so that we at least soem kind of error indication?
Please advice.
Regards,
Archana

Functional Module Extractor not pulling all the record on BW side

Hi,
i have written a FM extractor to pull data from CDHDR and CDPOS table. the Records count shows on RSA3 is more than 3,00,000 but while pulling it on BW side it brings only 41,000 Around records.
I steps i have taken is -
tried setting and resetting the package side in Info package.
Tried putting the default package size to 50K in FM setting
but nothing is working.
It seems like the pacet size is not incrementing in the code. i have tired to find ou the fault but coult not and RSA3 is working fine.
can anyone please suggest a correct piece of code or find out where exactly the fault is?

Vikrant,
The structure of your generic extractor function module should be something like:
If initialisation
Store parameters, clear packet count
Else
If first packet
Create cursor
Endif
Read block of records from cursor
If cursor returns no more records
Raise NO_MORE_DATA exception
Endif
Process records from cursor and output
Add one to packet count
Endif
This function module code can get called repeatedly. Possibly you are only extracting data for the first packet?
Mark

My inbox is not reading all the messages in Inbox.mozmsgs, and so opens with only recent messages. How do I get it to read the Inbox.mozmsgs?

Happened after a system crash. Thunderbird works, and I can read all my other folders, but I can't get access to the emails that were in my inbox yesterday and earlier.

Just one profile appears, so that doesn't appear to be the problem.
On your questions:
1) What operating system do you use: Windows 7
2) Are you using IMAP or POP? POP
3) If your mail server has a browser interface do the messages show up there? No, they were downloaded locally.
4) Right click on the folder in question and select Properties.
a) Number of messages? 104
b) Size on disk? 47.7 MB
But this is probably not the question you want to know, since this is the size of the folder and the mail I've received only after the crash and the disappearance of the email. At the time the folder failed, I would estimate it had around 1500 messages and probably close to 1GB in size.
5) Left click on the account name; View settings for this account; highlight Server settings; What choices are marked under "When I delete a message"?
There is no "when I delete a message" option under server server settings for this account. "Check for new messages at start up." "Check for new messages every 10 minutes," and "Automatically download new messages" are all checked under server settings. Fetch headers only and Leave messages on server are not. From a quick search online I see that this is not a POP option.
6) What, if any, antivirus program do you have installed? McAfee Security Scan Plus
Thanks. Still hoping to recover the lost messages.

Periodic Alert-How to send all the records returned from the SQL in a mail?

Hello all,
I have defined a Periodic Alert, my SQL query returns more than one record whenever I run it. I also defined an action to send an email with the message consisting of the output variables from the SQL. Whenever i run this alert, a mail is being sent for every single record returned from the query. But i want to send a single mail containing all the records information that my SQL query returns.
For Example: My SQL query lists all the users created on current date.
Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
from fnd_users where trunc(creation_date) = trunc(sysdate)
Now i want to send a mail with all the users information from the above query, to SYSADMIN. How can this be achieved?
Thanks & Regards
chakoo

Hi Chakoo,
If the Periodic Alert is not working as requried. You can write a simple package with 3 procedures to implement the writing output to a out file and simultaneuosly send email to multiple receiptents.
Example:
Create Package xx_pac
Create public Procedure P1
begin
Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
from fnd_users where trunc(creation_date) = trunc(sysdate)
fnd_file.put_line (fnd_file.output, &OUTPUT1, &OUTPUT2);
end;
(Create private Procedure P2
begin
---Write the email package using the UTL_SMTP approch. Using this approch you can send the procedure P1 output file as an attachment to the desiginated receiptents.
end;
(Create public Procedure P3
begin
---call the procedure P1 using the "g_request_id = fnd_request.submit_request"
---Wait for the above procedure to complete using "l_conc_status := fnd_concurrent.wait_for_request" procedure.
---call the procedure P2. (When called you must provide the correct to, from address)
end;
end;
Register the Package xx_pac as a concurrent program and schedule when submit it from the request.
Regards
Arun Rathod

BI publisher report is not showing all the data

Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.Kalidoss

Hi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks.

Could not read from the source. Please check if it has moved or been deleted

hi all,
when i try to render a afx project from media encoder i get the following message
"Could not read from the source. Please check if it has moved or been deleted"
i've read on the forum that this is due to an old installation of Premiere.
I'm using a brand new computer. the only software installed is my cs5 master collection and the updates from adobe website.
win7 pro
i7
16 gig ram
cheers
s

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
Steps to reproduce bug:
1. i export anything by button "queue" from premiere to Encoder
2. Encoder will start encoding
3. Encoder does not show the window of media encoding (down left )
Results: sound of sheep occur,
in encoding error file is this reason of canceling the encoding :
01/02/2014 10:10:48 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Sender file is not read all the records

Similar Messages

Maybe you are looking for