After release the release version different than debug version ????

Hello guys,
I am having a HUGE issue with my release build version of my application, when i run my application through eclipse it runs perfectly, however after making a release build of the application and running it behaves different than the version run from eclipse ???????? has anyone ever had this problem before and if so what can you do to prevent this behavior. thank you for any advice on this issue

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
Please report back to see if this helped you!
Thank you.

Similar Messages

I used to be able to print a mosaic cover from the print tab but after downloading the most recent (10.2.2) version I cannot. Though it seems to be showing the mosaic cover in print set-up it prints a play list only. Can someone respond with help

I used to be able to print a mosaic CD cover from the print tab after purchasing music but after downloading the most recent (10.2.2) version I cannot. Though it seems to be showing the mosaic cover in the print set-up it prints a play list only. Can someone respond with help in fixing this? I've tried several times with different down-loaded music but no success.

The recent releases of iTunes have brought a bunch of bugs into the printing of CD covers.
Some people report that directing the iTunes print output to PDF, and then printing to paper from the PDF, solved their problem. Others have reported that it did not help. Worth a try.

I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

Hi Shawn,
It sounds like the person who installed the hardware didn't install the software properly for you. You should reinstall this to get full functionality and control yourself.
The process is easy:
) With the computer on, close all programs that are running and put the Creative CD-ROM into your computer's CD or DVD dri've. There are probably several disks; the one that you want should say 'Intallation and Applications CD' on the label.
2) The Setup program should start automatically in a few moments, but if nothing happens, click your Start menu and choose Run..., then click the Browse button. From the 'Look In' drop-down menu, choose your CD/DVD dri've. In the list of files that appears, choose the one called Setup or Setup.exe.
3) The Setup program will let you choose what to install. Choose to install everything. There might be two separate Setup processes that start after this: one for the soundcard's drivers, and one for the Creative MediaSource software. Within each process, when you are given the choice of Full, Custom, or Basic, select Full in each case. Follow the instructions in the programs and they will guide you through the setup process.
IMPORTANT: you will likely be given the option to use digital output only to your speakers. Only select this if you have digital speakers, attached to the sondcard through only one digital cable. If your speakers are attached using several cables, you should use analog output.
4) Once all of the Setup programs are completed, they will probably have you restart your computer.
All of the above should have been done when the card was first installed, but it seems that whoever you paid to do the installation didn't bother with the software install.
After this is all done, you should be able to use all of your speakers. If you are still having trouble, you will be able to follow the instructions that you were given before on how to enable CMSS.
Good luck!
Neeraj Mathur

Need help The image I saw on the LCD looks different than the actual photo

i had canon camera and had problem The image I saw on the LCD looks different than the actual photo.any body can kelp me
[IMG]http://tralalatrilili.ga/thanks.png[/IMG]

Do you capture in RAW or JPEG? What software do you use to view your image? Is your monitor calibrated? What is the brightness level on your camera LCD? All of these information can affect your image. And keep in mind that image on the back of the camera is often brighter and more saturated.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

HT6012 In this new version Ability than original version of Export., In a lot of older Eprot several types of Vdo. But the new can not just mp4.

In this new version Ability than original version of Export., In a lot of older Eprot several types of Vdo. But the new can not just mp4.

Yes, the old album art view is gone, bu you can see the album art for a song that's playing by clicking on the art image and it will open a bigger view.
Everything else in your post is a waste. I'm not going to spend time reading it. If - and I repeat if, you have a question on how to get the best out of the new look iTunes, post it. But don't spend your time in long rambling negative rants.

Flex: Actionscript project swf is not working after export the release build...

Hi guys..
   I tried to built a project with AS3 only in Flex. When I run the project in flex, everything looks fine, but when I export the release build, the images that are supposed to be added are gone. I appreciate if someone can help me about it.
          init();
            public function init(loadedVideoCount:Number):void{
            singleHolder=new singleVideoCont();
            singleHolder.x=loadedVideoCount*singleHolder.width+2;
            singleHolder.y=6;
            singleHolder.buttonMode=true;
            addChild(singleHolder);
            this.addEventListener(MouseEvent.CLICK,onClick);
            showTn();
        private function showTn():void{
                imgLoader = new Loader();
                imgLoader.load(new URLRequest(_tnPath));
                        imgLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onProgress);
    imgLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoaded);
        private function onImgLoaded(event:Event):void {
        singleHolder.progBar.alpha = 0;
               var image:Bitmap = imgLoader.contentLoaderInfo.content as Bitmap;
                image.width=TN_WIDTH;
                image.height=TN_HEIGHT;
                image.x=3;
                image.y=3;
                singleHolder.addChild(image); //this line work when I run the project inside flex but the images are gone when I test my release build...
                imgLoader.contentLoaderInfo.removeEventListener(ProgressEvent.PROGRESS,onProgress);
                imgLoader.contentLoaderInfo.removeEventListener(Event.COMPLETE,onImgLoaded);
                //imgLoader = null;

The link you provided is to the SWF file, not to an HTML
file, so no one can test your HTML file.
Have you checked the code for the embedding of the SWF file
in your HTML file? I don't use Dreamweaver much, but I do know that
if you start assembling a Dreamweaver file without first saving the
HTML, embedded graphics and other items are inserted as direct
links to the files on your computer, rather than as relative paths.
There is one other possible issue: I note that your swf is
called CWABanner.swf. Depending on your FTP settings, it is
possible that your server is forcing all file names to lower case
(a common practice). Which means the file on your server will be
cwabanner.swf. Again, depending on how the web server is set up, if
it is case sensitive, it will treat CWABanner and cwabanner as
separate files. So if the HTML calls CWABanner.swf, but the FTP
upload has forced a rename to lower case to cwabanner.swf, the HTML
file will not find it. Check this out, or to be absolutely certain,
rename everything to lower case: the file name itself and the
reference in the HTML file.

Possible memory leaks in the code , ASSERT messages in debug version !!!

Hi,
I have my Indesign C++ plugin running successfully in DEBUG and RELEASE versions of Indesign.
But in Debug version, when I close my Indesign, I get a series of ASSERTS which I am not able to figure out why.
Below is the list of ASSERT I am getting while closing Indesign(loaded with my plugin)
Still have un-registered listener
..\..\..\source\components\csxs\CSXSPlugPlug.cpp (562)
ASSERT 'fInitialized' in ..\..\..\source\components\csxs\CSXSPlugPlug.cpp at line 1027 failed.
~InstanceList(): 2 outstanding references to UID 421 (Class kTextStoryBoss).
..\..\..\source\components\database3\main\InstanceList.cpp (1928)
~InstanceList(): 1 outstanding references to UID 443 (Class kSBOSMgrIndexStorageBoss).
..\..\..\source\components\database3\main\InstanceList.cpp (1928)
~InstanceList(): 1 outstanding references to UID 420 (Class kFrameListBoss).
..\..\..\source\components\database3\main\InstanceList.cpp (1928)
~InstanceList(): 5 outstanding references to UID 1 (Class ShuksanPrefix + 1 (0x101)).
..\..\..\source\components\database3\main\InstanceList.cpp (1928)
28 Outstanding Bosses!(Check file :QA:Logs:OutstandingBossLog.txt)
c:\development\citius\source\private\foundation\InterfaceTrackingUtils.cpp (107)
What changes do I need to make in my code to avoid these ASSERTS and is this something I should worry about?

I tried to follow the instructions by copying the text file and restarting Indesign but then it failed immidiately.
I have use InterfacePtr every where to get the reference of the boss I dont understand how these Outstanding Boss classes are remaining in my code.

Set Desktop Photo different than Iphoto version

When I choose a photo to "set desktop," it appears differently than the one in Iphoto. It is overly saturated.
I'm using a 22" external monitor when I see this, resolution set at 1680x1050, 60Hz, millions.
The picture looks good in emails and Preview. I would like to see my "real" photo on the desktop!
Any ideas?

Thank you. I tried what you suggested and didn't make any difference. However, when I got my new imac, I didn't migrate the contents of my macbook across immediately and started downloading games, etc onto the imac. I later migrated the contents across and my imac made a new account- my name with the number 1 after it. So I now have two accounts on the imac. I have just logged back into the original account to find a game (the two user accounts are driving me crazy!) and the original picture on the desktop looks great! So it is only fuzzy on the second (main) account. AAAaaaah!

Why is the INVOICE date different than the ORDER date?

Something odd is happening... I'm receiving workflow notifications from Business Catalyst for Invoices, but sometimes the date of the order is the day before I receive the invoice. This is causing havoc on the shipping side because when I print out the invoice packing slips and export the order files, they don't match up and sometimes customers get missed.
Any idea why the invoice date would be different than the order date and how do I fix it to make them the same?
Thanks in advance!

Hey there,
An invoice is not an order. That is an important thing to know.
An order is generated through a few means but mainly as soon as one product is added to a cart - that order exists and the date marked. An invoice is a purchase and comes from an order.
Create an order in the admin yourself and save it but add no invoice number. You can see you just made an order and you will see the button to generate invoice.
API can make an order and no invoice, a person can add items to cart and finish it the next day if they have their session open that long... Lots of reasons why these dates may differ.

Unpluggin the Ethernet is Different Than Turning Off The Server!

Hi All,
I am working with a cFP2020 with a 4 space backplane. I am running Labview 8.0 RT. Have not gotten around to putting in the latest set of CD's I just got sent. I have the whole setup on my desk here and am noticing a potential problem for my application. Was hoping that someone could explain this to me?
I am building a vehicle, with the cFP on the vehicle and a PC controlling the vehicle. Mostly Im turning on lights and reading sensors on the vehicle, but I am transmitting some commands.
My perfect world would be that if I lost communication between the vehicle and the PC, that the vehicle would recognize this within a reasonable ammount of time (1-2 seconds) and stop itself. I would like a whole routine for "com failure" to run if that is the case.
My questions:
It does not look like I want to use the fieldpoint watchdog because everything I have read indicates that on a watchdog com error, the fieldpoint shuts down. Am I wrong? Should I look further into this?
I wrote my own watchdog. It sends messages back and forth on shared variables. If a message is late, it turns off a light (using cFP led's on the main module.) The PC VI is running as part of the project. The Vehicle VI (on the cFP) is compiled as an application that runs on startup. I have experimented alot with failure situations. The following work fine:
- Stopping the PC VI that communicates with the vehicle VI. The light on the cFP turns off fine.
- Stopping the Shared Varaible Engine. "Undeploy" on the shared varaible in the project. The light turns off fine. Infact both the PC and the Vehicle VI's register the dissconnect with their lights.
The following does not work right:
- Unplugging the ethernet link! The VI on the vehicle (cFP) is still running (got another blinking light going), however it takes 11-16 seconds for the light to turn off, indicating the disconnect. This is quite a bit longer than the other methods that work fine (those are about 1-3 seconds). Can anyone think what is going on?
I know this seems like an essoteric question, but it gets to the protocal for the cFP. Should I be running my PC VI as an application? I am running it in the project.
Thanks
Kevan -
As an aside, is there a way to deploy an application and have it run immediatly upon deploy. I am having to reboot to run the application. I notice different performance if its running from the project v. it running as an app. Since I will be using it as an app in the final product, I want to test it that way.
Thanks Again -

Kevan,
The quick answer is that most NI ethernet protocols are implemented with 10 second timeouts. This is different than the undeploy in that stopping the shared variable engine will send unsubscribe messages rather than timing out. (Note: I am making an assumption on how the shared variable protocol works because it is partially based on the older Logos protocol used in Fieldpoint, and that is how the closing works for Logos).
As for the watchdogs, there are two watchdogs in [c]FP RT modules; the RT watchdog (which can reboot the controller) and the network communications watchdog (which can set one or more outputs to a desired state on loss of communication).
For a very rapid communication link disconnect, implement the shared variable as a boolean that has it's state inverted every half second. Have the [c]FP controller read the variable and look for changes in the state of the variable. If the variable does not change at the update rate (with some small margin for timing), then you have probably lost the link prior to getting a full network timeout.
Regards,
Aaron

Local version newer than repo version.

I got sick of using Enlightenment 16.7.1 (newest in the repo) so I altered the PKGBUILD and made 16.7.2-1 and now I get this whenever I use pacman..
:: enlightenment: local version (0.16.7.2-1) is newer than repo version (0.16.7.1-2
Is there a "right" way to make that just.. go away?

Yes, it is very easy.
1. Put your pkgbuilds in a heirarchical structure, much like in abs. I have the following structure for mine.
/var/abs/local/
/var/abs/local/amavisd-new
/var/abs/local/ltsp-utils
/var/abs/local/mod_ruby
/var/abs/local/php
/var/abs/local/postfix
/var/abs/local/webalizer
The pkgbuilds and the related files are in their respective folders..
2. Move the binary packages that are resultant from building the packages to a folder of your choosing. Like /home/eliott/public_html/archlinux/binary-packages/ for example.
3.
gensync /var/abs/local/ /home/eliott/public_html/archlinux/binary-packages/cactus_repo.db.tar.gz
The first part of the db.tar.gz target is the name of the repository that you would put in brackets in pacman.conf.
4. Put rule in pacman.conf
If you wan't it to override what is in the archlinux repos, then put it first.
[cactus_repo]
Server = file:///home/eliott/public_html/archlinux/binary-packages
#Server = http://cactuswax.net/~eliott/archlinux/binary-packages
The first server is if the repo is on the same machine. The second one, commented out, is if it is on a different machine. This is very useful if you have alot of servers, and want to centrally manage package deployment.
Now, everytime you update a package or add a new one, you can just rerun the gensync command above, and it will rebuild the repo list for you.

After Effects CS5: final render different than the preview

Hi all,
I have a problem I cannot find a solution.
I am making an animated route on a map. My map is a 2D map and I travel along the route in 3D. The preview looks good to me but as soon as I try to make a render the result is completely strange: the camera moves are completely different!
I checked the parameters of my composition and the ones of the rendering and they look exactly the same.
Would you know from where comes the problem? My video is 860*480 and the map is 15000*15000 big. Could it be an explanation to the problem? Can I solve it in a way?
Many thanks for your answer!
If needed I can make some screenshots of the render and the preview to show you the difference.
Swiggen

Hi Mylenium and thank you for your quick answer.
Please find attached some screenshots with the comparison with Quicktime render.
I also would like to add that RAM previews are fine (means in accordance with the timeline and the overview) but any kind of renders (final or pre-render) make such mistakes.
Thanks again for your kind help and if needed, I can provide you more information (my aep file?).
Swiggen

Back up iPhoto 08' for the first time (different than last time I did it)

The last time I backed up my photo library was before I got iPhoto 08'. I know I should have done it a long time ago and backed things up at least once a week but I kinda got busy. Since my last backup I have also upgraded to Leopard, which yes I did back up my hard drive when I did that, but I also had the advantage of having an IT person personally helping me.
Today when I went to back up my library things were different. Rather than the old "iPhoto Library" folder that use to be in the pictures section, I just see a single file named "iPhoto Library" and when I click it, it launches iPhoto.
So my question is how do I back up my library now, and what ever happened to the "Original" and "Modified" folders? What I would really like to do is save my current library on an external with everything intact. Events, Albums, the order I added them in, etc. I want to clear iPhoto out completely and then re-import my current library.
I should probably mention that on the external hard drive right now is a back up of my old library from before my upgrade to Leopard and it still has the old setup of the iphoto folder and then inside that is the "Original" and "Modified" folders. How should I handle this, just delete it?

With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Package File. This is simply a folder that looks like a file in the Finder. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
Want to see inside? Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look familiar? Standard Warning: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
What I would really like to do is save my current library on an external with everything intact. Events, Albums, the order I added them in
Simply copy the iPhoto Library from the Pictures Folder to the External. That's it.
I want to clear iPhoto out completely and then re-import my current library.
I'm afraid that doesn't make a lot of sense to me. If you back up a library then trash it, then restore the selfsame library, how does that constitute a “clear out”?
I would delete nothing until I had the Maintenance project finished.
As an Fyi
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Regards
TD

I'm using 3gs, after updating the OS with 6.1.3 version lost all my photo albums unable to retrieve through Itunes kindly help me in this regard.

Hi There,
A month ago I had 3gs with 4.1 OS version and I synced all my photo albums from my old laptop as I have planned to sell it off.
I sold my old laptop and accidentally kids at my home have pressed reset button and my phone got locked, now I got my phone permanently unlocked with a vendor and updated my OS to 6.1.3 version, thinking that my photo can synced again when I connect to Itunes, I bought my new laptop installed Itunes authorised it, it was able to restore my camera roll pics but not my album.
Please help me in restoring my lost album.
Thanking in Advance.

I'm sorry, but unless you hace a backup of your pics somewhere, they are gone. Photos synced to your phone are not part of an iPhone backup, & the photo sync is one-way: Computer to Phone. When you synced to a different computer, these photos were erased from your phone...by design, iPhone syncs iTunes content with one computer at a time.
Sorry, there is no way to recover this data.

PDF version different than what shows in Metadata

USUALLY, when I open the metadata of a pdf, the version shows in the first few characters (1.2, 1.3, 1.4, etc)
%PDF-1.2%âãÏÓ
I've come across a couple pdfs that SAY 1.4 in the metadata, but when opened with adobe reader they say pdf version 1.5! Which is correct? Is there a more efficient way to look for the pdf version?
Here is an example:
The metadata says version 1.4-
%PDF-1.4%âãÏÓ14 0 obj<</Linearized 1/L 140724/O 16/E 131916/N 1/T 140412/H [ 452 172]>>endobj
But when I open in adobe, the version says 1.5- (Seen in Document Properties)
Can someone help?

The file can be tagged one thing and the pdf can conform to a different standard. Open the pdf file in a text editor (not a word processor), the first line should be a good indicator of what standard the file conforms to.

After release the release version different than debug version ????

Similar Messages

Maybe you are looking for