After renaming and moving to my desktop an iMovie project, i can not open it. I moved it back to iMovie but still it is not working. I noticed that there is not an Event Folder for the project. Can someone help me?
I renamed an iMovie project, then I moved it out of iMovie to my desktop. It did not work from there. Finally I managed to move it back to iMovie, but still does not work. I can't edit it, it does not even appear as an option. I found out that the Event Folder for this Project is gone. Is this the problem? Is there a way I can get it back? Can somenone help me?? Obviously after so many mistakes you can tell I am new on this. Any help will be appreciated it!!!!!
OK Let's take a step back.
If you imported video clips from a camcorder there would be an Events folder in the Movies/iMovie Events/ folder.
You have the option as you import from a camcorder to send your Event to an external drive instead. In this case, it would be in the iMovie Events folder at the top level of the external drive.
If your project has no video clips, but only photos, there may be no events folder, only links to iPhoto.
Similarly, if your camera imported your video clips to iPhoto, and you used the iPhoto event in iMovie, then your clips are in iPhoto, and there is no separate iMovie event.
Similar Messages
-
I have been using I Tunes Playlists for some time.
Recently, I was creating some new playlists, and seem to have goofed up somewhere.When I open an existing playlist,and when I try to play each of the songs in the playlist,the same song plays,even though I scroll down to the next song.I also notice that,there is a ! sign next to the serial nos of each song.How can I remove this sign ?I suspect that this is the problem.
ThanksThe exlamation mark happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
Revision: 2093
Author: [email protected]
Date: 2008-06-16 12:57:18 -0700 (Mon, 16 Jun 2008)
Log Message:
fix air-config.xml so that there are no hard-coded values for the build number. This gets updated from the root build.xml by using a combination of a value from build.properties, release.version, and a value passed into build.xml build.number.
partial fix for sdk-15812
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-15812
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/air-config.xmlI need to add just one more thing and that is on battery life. Last night I sat with the rMBP on my lap installing software, surfing the web, answering emails for close to 4 and 1/2 hours. At the point I took it back to the charger it still was showing a computed battery time remaining of 3.5 hours.
Today I had two VMs open and took the machine of the charger and sat outside with my dogs for about 30 minutes. During this time I was working in both VMs, editing and compiling code. My battery life estimate showed a good solid 4 hours.
This is roughly 6 times greater than what I had with my 2010 MBP and it too had a SSD. I am not sure why but this retina MBP just seems to not work as hard doing anything that caused my 2010 MBP to struggle.
While the battery life is certainly better than I expected it is clear that load can change that very rapidly. So I think I still need to visit clients with an external battery or charger in hand. But I don't think I will be quite so scared that my laptop will simply run out of power before I can even get it plugged in. -
Hi everyone,have you noticed that there is kind of green light inside the camera even if the camera turns off? It it normal? Thanks!
I assume you mean green reflection from the camera?
thats the AR coating on the lens. -
I have heard of people ordering their iphone 6's and having them shipped out in the next day. I understand demand is extremely high but I don't understand why it has to take this long for my order to be fulfilled.
mattminsch, I know that you're excited to get your new device and we are too. The demand for these devices would most certainly be high and depending on the model that was purchased. Currently for the time frame that was mentioned the ship date would be 10/31 for most models. Once the device has been set to ship only then would you see the order change from processing to shipped. Do you remember what model you purchased?
AdamG_VZW
Follow us on Twitter @VZWSupport. -
In previous versions I have been able to drag the icon from the address bar to a Windows folder, producing a clickable link in that folder.
I even have FAQ and Help files on various web sites advising people to do that as it is very useful to have links to web sites in a folder relevant to the content of the folder.This is very frustrating -- this feature worked in ver. 3, not sure about 4, but now FF 5 has removed it. This is important enough to me to either revert to v. 3 or use Opera (see below).
IE v. 8 has removed it too.
Opera v. 11 will do it -- but it only saves to the desktop and not to folders, so you have to drag the icon to the desktop and then drag it into the folder.
I use this regularly with presentations -- will be doing one next weekend -- and I take it on a USB memory stick to someone else's computer. I can click on a link in the presentation folder and have that page open in their default browser. It does me no good to have the link in my bookmarks back at my office.
If you're going to remove the feature, you might ought to remove the suggestion to use it at:
http://kb.mozillazine.org/Mouse_tips
and
https://support.mozilla.com/en-US/kb/Creating a desktop shortcut to a web page
Please restore this feature! -
Would much appreciate it if you could help me solve this problem.
I can tell you that with Sprint their coverage area isn't as good as Verizon or AT&T.
Are you sending these imessage while on wifi or cellular data? Also your husband would need to be in a good coverage area.
Usually when imessage is unavailable it will send it as a text. Does your husband receive your imessage as a text? -
i have a ipod touch and i got it for christmas with an iTunes card .the problem is that i downloaded videos and now it said that there is not enough space and i only downloaded 8 and now 5 don't download how do i erase them.can get my money back
Whatever you read about iTunes is wrong unless you're actually referring to feature movies, not videos. Videos, apps, music and iBooks you can re-download:
http://support.apple.com/kb/ht2519
Download to your computer and then sync to your iPod touch whatever will fit.
And no, I can't say with certainty that they won't give you a refund, but it's unlikely. The most probable outcome, if you do indeed mean movies, not TV shows or other videos, is that they would set up an additional download. For other content they'll probably just direct you to the same instructions on re-downloading I just posted. -
Cannot open project: the folder for this project cannot be found cs4
I am using Encore CS4 and I get the error "cannot open project: the folder for this project cannot be found"
Having searched the forums I can not find a solution for when the project folder has been deleted.
Can someone tell me the solution to this issue.If you deleted the Encore directory, you cannot fix this. You'll have to start over.
Encore creates this folder structure:
Root or some other Folder
MyProject.ncor (the Encore project FILE)
MyProject (the Encore project directory)
Other Folders for the Encore project (e.g. Cache, Sources)
You can get the "the folder for this project cannot be found" in various ways.
There have been two recent threads in which the user, by accident or on purpose, changed the folder location or name. You can fix this by renaming the folder correctly or moving it back (or moving the Encore project file to the correct relative position).
Folder was renamed. If you name the folder "MyProjectX" Instead of "MyProject," the project file "MyProject.ncor" can't find it.
Encore project file was moved - or Encore directories were moved. If you move "MyProject.ncor" to some other directory or drive (including inside the folder "MyProject"), it can't find the directory - it is looking one directory level below where the project file is located.
If you delete the Encore project directories, the stuff that Encore uses that projects menus, motion, etc, are gone. While many of its instructions are inside the project file itself, many are not. Some of the deleted material might be recreated (e.g. trying to fake Encore into accepting a copy of a menu), but most cannot. -
How to rename a new folder in the project library in FCPX
How do I rename a new folder in the project library in FCPX?
ThanksHi
Why not ask in FinalCut Pro X forum.
My guess is as in iMovie'11 - point at it and ctrl-click on it - may be there is a re-name function in this menu.
Why they didn't name it iMovie Pro X is beyond me.
Yours Bengt W -
In iMovie 10, the events folder with my projects disappeared
In iMovie 10, my projects are listed under "All Projects" but they are no longer found in any events folder within the library, apparently after some glitch. I can still work on a project but can no longer duplicate it (e.g. to save different versions), and I am concerned I will lose the project altogether. When I go into the iMovie library package contents, I can see all the projects in the folder "Updated Projects", but I can't find any way to get iMovie to recreate this folder within the application itself.
Here's the solution: iMovie 10.0.3 project disappears after share
-
Im trying to burn an iDVD and its saying that there is not enough free disk space for encoding the remaining assets. My main hard drive only has a few hundred Mb left on it so i bought a 1 Tb external hard drive and want to know how to make iDVD use the space on the external hard drive instead trying to use the main hard drive. Any help would be awesome! thanks
Hi
Yes - This is important.
Free Space - Must be on the Start-Up (Mac OS) hard disk and can not be used on any other.
My safe level is a minimum of 25Gb free space - to let iDVD and Mac OS run OK.
This is due to that Mac OS X is in reality UNIX and there by needs lot's of temporary space for temp. files and so does the application iDVD. And this can not be addressed elsewhere.
So to free up space - one thing is to move iMovie Events to an external hard disk BUT THIS MUST BE DONE Right Else all can be lost ! !
• Never move or adjust any folders Named - iMovie Events or iMovie Projects - on Desktop/Finder - links will breake and can be hard to impossibly to heal. ALL movings must be done within iMovie Application (it goes for iMovie'08 to 11)
• External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted - UNIX/DOS/FAT32/Mac OS Exchange will NOT WORK FOR VIDEO - nearly everything else BUT NOT VIDEO.
Yours Bengt W -
I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?
Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education. -
I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.
It sounds as if your browser and some of your apps are not color-managed. This is pretty typical. Even IE9 is only partially color-managed.
You can expect color-managed and non-color-managed applications to show you different things with the same images. How different will depend upon how different your monitor color profile is from the image's color profile.
For web publication and most general use, experts usually advise saving images with the sRGB profile. If such images, saved through the Save for Web & Devices function, look different to you than you expect, it may be that your input images have previously been saved in another color space.
You should really try to get your head around color-management by reading more on it. It can seem baffling and it's difficult to understand without some background. A quick web search turns up many overviews. Beware, though, even people writing articles sometimes don't fully understand it.
-Noel -
How to display Issues for the projects which user can view in the Project Center View
Hello All,
In the project center view, at the bottom, we need to add one table, which can show the Issues for the projects that are displayed in the project center view.(Projects visible to the current user).
Example: A resource 1 can see the Projects Project 1, Project 2,Project 3 in the project center view. So resource 1 should be able to see all the issues that are entered against the Project 1, Project 2, Project 3, irrespective of the issue that has
been assigned to any resource.
Please help.Hi,
You could simply edit the page and add the risks and issues webparts. This will display risks and issues assigned to the user.
Click on edit page, then add webpart. In the Project We App section, pick up the risk webpart and then the issue webpart. Finally drag them to the bottom of the page and close the page.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |
Maybe you are looking for
-
InDesign CS5 won't save rotated views as PDF
I'm using InDesign CS5 to create a calendar. I am using rotated view for the spreads. I have page 4-27 I want to send to my client for proofing. I only want the "smallest File" for screen viewing ioption. I've never had a problem creating PDFs. This
-
my mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be? can it be a software issu
-
Hi Experts, The BASIS team has configured the CCMS alert for XBTI* and XBTO* queues in development system. Hence we need to test the same. Possibilities tried: 1. Huge payload 2. Stop and start of BPE this blocks the XBQ which is not needed as of now
-
Default text in a text entry box
Hello, I am working on a vi that functions as a operator panel for a piece of equipment. The user is able to hit a setup button that brings up another vi (based on the "prompt user for input" express vi) so they can fill in about 15 different fields
-
As you can see in below pictur there is - in between numbers so is there any ways I can remove it