After the kit kat update, S voice doesn't seem to work any more to wake up my phone. I've redone all settings for it with no luck.

"Hi Galaxy" will not wake up my phone after updating to 4.4.2. Is there any solution? I went back to scratch and did all settings to no avail.

Okay after two hours I got a tech on the phone that accessed the task manager and did a cache clean up on the entire phone.  This worked and now Hi Galaxy will wake up the phone.
1. Go to Settings/Application Manager.  Slide the screen to reveal ALL applications then scroll down to S Voice.  Hit CLEAR CACHE.  Then while you are still on that screen hold down the home button and hit Task Manager on the bottom left.  Under RAM click CLEAR MEMORY over and over until zero applications are closed.  Then restart the phone.
2. After the restart turn the phone back off.  Once the phone is off you will hold the UP VOLUME, HOME BUTTON and then hold POWER at the same time.  Once the phone turns on you can let go of the Power Button.  RECOVERY BOOT will appear in the top left.  You will come to a menu of options up in the top left corner.  Use the VOLUME DOWN button to highlight WIPE CACHE PARTITION.  You will select this option by pressing the POWER BUTTON.  When this short process is over it will highlight REBOOT and just hit POWER again to reset.
Hope this works for you.

Similar Messages

  • Since the Kit Kat update every time I am on a call I here a Beep on my phone every 30 seconds very annoying anyone else having that problem.

    Since the Kit Kat update every time I am on a call I here a Beep on my phone every 30 seconds very annoying anyone else having that problem.

        Thanks for the information DiGravio1! Let's look further into this. Please navigate to Settings>My Device>Call>Call Alerts>Under Call Status Tones Un-check alerts>Power off/on, test and share. Thank you.
    TominqueBo_VZW
    Follow us on Twitter @VZWSupport

  • I have an older s3 that is off-network, How can I get the kit kat update on my s3?

    I have a "retired" Galaxy S3 that I am keeping as a spare-  The Kit Kat update supposedly has been available since 6/20, but I cannot get the software on my off-network phone to update-  even though is is connected by wi-fi.  I spent about a half hour chatting on-line with tech support Monday, 6/23, who assured me that is would update over wi-fe-  although I have NOT been able to do so yet.   I went into the Verizon store yesterday, and the woman I spoke to there told me all I had to do was swap SIM cards with my active phone, then casually mentioned that if I did that, it would void the warranty on my new phone by taking it off-network.  Great, just what I would want to do...
    I am seriously considering re-activating it for a couple hours, just to get it updated, then deactivating it again.  It would seem there should be an easier way.

    Thank you for the prompt reply, but still unsatisfying.  I spent a couple hundred dollars for this phone less than 2 years ago (not to mention the $600 for the S5 off-contract a couple months ago) and you are telling me that I have to void the warranty or open a new data-service line to get the proper support for my Verizon-branded device?  At this point the S3 is off warranty and primarily used on wi-fi-  I could just as well root it and run custom ROMs I suppose-  nothing to lose at this point, since the company that sold it to me won't even help to keep it up-to-date.  I don't mean to sound like a whiner, but this is not what most would consider good customer support.

  • TS1702 Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

    Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

    Maybe here:
    IOS 6 App store crash: Apple Support Communities

  • My new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???

    my new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???

    Try an SMC Reset. (System Management Controller)
    Shutdown>unplug from power for ten minutes>press and hold in the power button for ten seconds>startup again.
    Also try a PRAM Reset. (Parameter RAM)
    Shutdown. At the bootup chime, hold down CMD-Option-P-R together, wait for two more chimes, total three, then let go of all keys to finish booting,
    If this doesn't do it, run the Hardware Test in Extended
    http://support.apple.com/kb/ht1509

  • CS3 doesn't want to work any more

    Hello,
    I have an old version of the creative suite that is all right for what I do (information for a charitable organisation for medical research) installed in 2008. For quite a while now every once in a while when I start up I get a screen asking me to register. But since I already am registered Adobe just said to click on later and go on working. But this morning the screen is empty so I can't click anywhere. I've tried restarting and even turning off the computer and trying to restart my day.
    What can I do ? Help !
    Thanks.

    Thanks a lot. That worked for me too. I was afraid that CS3 had changed into
    a pumpkin this morning.
    virginie
    Le 22/11/13 13:25, « De Mostertman » <[email protected]> a écrit :
    Re: CS3 doesn't want to work any more
    created by De Mostertman <http://forums.adobe.com/people/De+Mostertman>  in
    Photoshop General Discussion - View the full discussion
    <http://forums.adobe.com/message/5865197#5865197>
    I had my CS3 freezing this morning on startup. I hope you didn't reinstall or
    anything bacause the sollution is quite simple: What helped me was restarting
    Photoshop with the internet cable pulled out. Apperently it was freezing on
    the registerscreen, and by removing the internet cable I surpassed that
    screen, to see another screen.after that i could start it up again with the
    internet cable plugged in again.
    Please note that the Adobe Forums do not accept email attachments. If you want
    to embed a screen image in your message please visit the thread in the forum
    to embed the image at http://forums.adobe.com/message/5865197#5865197 Replies
    to this message go to everyone subscribed to this thread, not directly to the
    person who posted the message. To post a reply, either reply to this email or
    visit the message page: http://forums.adobe.com/message/5865197#5865197 To
    unsubscribe from this thread, please visit the message page at
    http://forums.adobe.com/message/5865197#5865197. In the Actions box on the
    right, click the Stop Email Notifications link.  Start a new discussion in
    Photoshop General Discussion at Adobe Community
    <http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerTy
    pe=14&container=4694>  For more information about maintaining your forum email
    notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • When is the kit kat update coming to verizon?

    Is there a kit kat update coming to us G2 OWNERS this year?

    There is no realise date for it yet.  I think it is becouse people are still buying the note 4.

  • Passwords aren't registered. Settings are right, i see the "remember" button, but clicking it doesn't seem te have any affect

    After installing version 3.6.13 remembering passwords doesn't seem to work. I checked the settings (private navigation, privacy, security). each time i visit a website which needs a password the "remember - bar" shows and i press the remember button, but nothing happens.

    You can try the Troubleshooting section:
    * http://kb.mozillazine.org/Password_Manager

  • The time i run icloud on my iphone cammera doesnt work any more even i delet my acc on icloud .when i push on camera to take photo after a second it goes to home page,can u help me pls

    the time i run icloud on my phone,camera doesnt work any more,when i push on camera to take photo after a second it goes to home page .i turn off photo stream,rest my phone,even restore again still camera doesnt work,what shall i do?

    Dude or hot-spur,
    Not fishy at all!!!! You really think I would have taken any more of my time to post a bogus rant? We'll no, it is unfortunately all true. I want to hear from anyone who is experiencing such problems not anyone else that wants to put there two cents in. I really don't need anymore hate or negativity. Just people's experiences because I feel like I am the only one having so many problems. Thank you
    Yes, I have had some unfortunate bad luck to have so many problems at the same time, but some of them are just things you cannot do on the new OS.
    Thank you again

  • I have a Mac OS 10.9.4. After the last OS update on 11.July.2014 Flash stopped working. Why and how can I fix it?

    All of a sudden my computer stopped allowing me to watch Youtube videos or anything involving Adobe Flash software. I tried uninstalling Flash and reinstalling it, I've tried changing my cookies... everything that I find on different forums and I still can't get videos to play. On the Flash website it says that the latest flash model, version 14.0.0.145, works with Macs OS 10.6-10.9. Does that mean that flash is incapable of working with a Mac 10.9.4? I can't believe that the mac community stopped watching Youtube after the last update and nothing's been done. Has anyone else experienced this problem and more importantly found a way to fix it?

    If you can't install or update Flash, follow these instructions.
    If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
    Step 1
    You might have to log out or restart the computer before a Flash update takes effect.
    Step 2
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
    and confirm. Close the window. Then select
               ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.
    Step 3
    If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
    Step 4
    a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
              When visiting other websites
    From that menu, select either Allow or Ask.
    b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
    c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
    /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
    Right-click or control-click the highlighted text and select
              Services ▹ Open
    from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Step 5
    In the Safari preferences window, select the Advanced tab and uncheck the box marked
              Stop plug-ins to save power
    Step 6
    Open this folder as in Step 4:
    /Library/Internet Plug-Ins
    Delete the following item, or anything with a similar name, if present:
              Flash Player (failing).plugin 
    You may be prompted for your login password.
    Step 7
    Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
    Step 8
    If you get a "missing plug-in" error, select
              Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked  
              Allow (or Enable) plug-ins
    Then click the button marked
              Manage Website Settings...
    if present and make sure that the website is not blocked for Flash.
    Step 9
    Select
              Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.

  • After iOS5 update iPhone 3GS  doesn't seem to work properly?

    update including backup took very long and it was also interrupting at least 2 times.
    Now after the update sms and phone list was deleted and some apps are much slower - e.g. it takes a few seconds until the keyboard pops up and then while typing the letters are also delayed.
    And the remote control on the original headphones won't work now.
    I have the impression the software is too much to handle for the 3GS.
    Anybody with similar experience and possible solution?
    cheers, Carola

    Have you tried a Restart... Reset... or Restore...?
    Iphone Reset
    Reset your phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore from Backup...  Restore as New...
    Restarting your device
    1)   Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    2)   Press and hold the Sleep/Wake button until the Apple logo appears.
    Follow these steps to reset your device
    Note: Reset your device only if it is no longer responding and the steps above do not work.
      Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Is there any way to roll back the Kit Kat update to the previous version?

    Since the update my car(2012 SRT8 Charger) will no longer read text messages from my Razr HD to me or even show them on touch screen. It was working fine before update.

    Everything worked fine before the update and nothing on the car has changed. I unpaired and repaired and now I get the message on my car that says "Feature not supported on the current phone" The reason I chose this vehicle and phone were because I really needed that feature due to being a real estate broker on the road all the time. I didn't ask for the update and I want it back to the old OS. I'm also having issues now with battery life, WiFi, and bluetooth. This is totally unacceptable and if I have to change phones I will definitely be changing carriers on all 3 lines I have. Please advise.

  • Updated my iphone and it deleted a notes app that doesn't seem to exist any more

    after putting off updating my iphone for months i finally desided to do it. I had an app called notes, published by a company called Mendero AB, and when iv'e gone to dowload the app again it isn't even in the app store. I've looked online found it tryed to download it and it says cant dowload here transfer to another itunes (swedish itunes) then when that pops up it isnt der either. It's not the app I'm bothered about it's the notes i've wrote down I presumed they would still be there if I re-dowloaded it because the update deleted gta3 from my iphone when i re-dowloaded it my game save was still there.can anyone help me pleeeaase

    Have you backed up your device to your computer?
    If so, you can find a copy of every app in User/Library/Music/iTunesMedia/Mobile Applications.
    Check to see if your app is still in there. It's very possible iTunes removed it on its own, in which you would be SOL. You can sideload apps into iTunes but that requires a copy of the app from elsewhere.
    Have you checked this out? http://itunes.apple.com/kz/app/ava-crown-notes/id427173642?mt=8

  • I recently installed the new operating system.  iMovie doesn't seem to work the same as in Mountain Lion.  I can't figure out how to burn a movie to a DVD.  Has that feature been eliminated?

    I am having difficulty figuring out how to burn my iMovie to a DVD.  Has that feature been eliminated?

    unbelievable... the amount of RAM is the issue... I found a post (http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=8448) on an unrelated matter, but the user solved their issue under X64 by limiting the amount of RAM WinXP x64 was using by editing the boot.ini file.
    The basis of the "trick" is to add " /maxmem=4096" to the end of your OS line, but I elected to copy the line and add it to a new entry so I could easily select which "mode" i wanted at boot.... like so...
    multi(0)disk(0)rdisk(0)partition()\WINDOWS="Window s XP Professional x64 Edition" /noexecute=optin /fastdetect
    multi(0)disk(0)rdisk(0)partition()\WINDOWS="Window s XP Professional x64 Edition - X-Fi tweak" /noexecute=optin /fastdetect /maxmem=4096
    amazingly this solved my issue... but now my system properties only report 2Gb instead of 4Gb... unacceptable!
    When Can I expect a fix for this Creative?

  • I've added a new user to my computer and there doesn't seem to be any firefox connected to it. Do I have to install firefox for the new user also?

    I went to set up a separate user for my child and when I was finished there was no Firefox icon . All it showed was Explorer. Do I have to download Firefox for every user? Please help?

    Sounds that you didn't create a Firefox desktop icon for each user in the All Users group (C:\Users\All Users\Desktop), but only for the current user. You can either create a desktop shortcut to start Firefox on the desktop of your child to the "C:\Program Files\Mozilla Firefox\firefox.exe" program or create that shortcut for all users in the "C:\Users\All Users\Desktop" folder.
    If you also need a Start menu entry that place a shortcut here:
    "C:\Users\All Users\Start Menu\Programs\Mozilla Firefox"

Maybe you are looking for