After the Mountain Lion 10.8.2 upgrade my system is VERY slow, online connection down miserably. WHat has happened and how do I go back to 10.8.1?

Upgraded my Macbook Pro tonight to 10.8.2....horrible move, internet connection is now a slow crawl. Was very fast before upgrade. IF no known fix how do I go back to 10.8.1?

I had the same problem. My solution was to reset the SMC on my 2010 Macbook Pro and now my internet speed is back to normal.
To reset the SMC, shut down the computer completely. Then hold SHIFT+CONTROL+OPTION on the left hand side of the keyboard AND the Power key for at least 2 seconds. Release all the keys, then repower the laptop normally using the power key.
Hope this helps.

Similar Messages

My MacBook Pro (Mountain Lion) seems to be making copies of files in my download folder. Why is this happening and how do I stop it?

My MacBookPro with Mountain Lion seems to be making copies of files in my download folder. Why is this happening and how do I stop it?

This issue has nothing to do with Time Machine or local snaphsots. No built-in feature of OS X does what you describe.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy (command-C) the selected text to the Clipboard. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copy-and-paste as well. Omit the final line ending in “$”. No typing is involved in this step.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which you do have to type. It won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

In iPhoto most of my photos appear to have been replaced by much smaller versions. What has happened and how can I get the full size photos back?

In iPhoto most of my photos appear to have been replaced by much smaller versions. What has happened and how can I get the full size photos back?

That is either a bug in Firefox 5 or the script has a problem with Firefox 5.<br />
It works in all other Firefox versions like Firefox 3 and 4 and 6 (Aurora) and 7 (Nightly).

Suddenly Firefox has changed the text size of my mail page...I am unable to read the text or mail, it is so small. what has happened and how can I rectify this?

When opening my Mail window, I found the text size was virtually unreadable. It has decreased. and I have no idea how to rectify this. This problem only started today-

See this: <br />
https://support.mozilla.com/en-US/kb/Page+Zoom

I have just updated my Ipod to version 6 but my ipod now states ios6 on the front of it and has all different languages on the slide button. what has happened and how do i put it right?

I have just updated ny ipod tough to version 6 and now it states ios6 on the front screen and where it says slide to input security no it is in all different languages. What do i need to do to sort?

Fire97 is corret. It appear that you have to resetup/activate the iPod. Just slide to unlock and following the on-screen prompts.

Everything in my Mac Mail has disappeared, all the accounts and therefore all of my mail, as if I had never set up any accounts. Please help, any ideas as to what has happened and how I might get them back ?

Opened Mac mail this morning and it is completely empty, all my mail accounts (and therefore mail) are gone. Please, does anybody have any suggestions? Have no idea what to do......... Yosemite 10.10.2. Thank you

I just found this discussion and restored 2 files from Time Machine - it worked. Power loss, Mail accounts gone, "Welcome to Mail" splash screen

HT201364 I am using the os x 10.7.5 how can i get the mountain lion in order to upgrade to Mavericks

I am using the os x 10.7.5 how can i get the mountain lion in order to upgrade to Mavericks

What, specifically, is your Mac model?
MacBook Pro, but need the year it was released, processor speed, etc. This will determine if it *can* be upgraded further.
Best,
- Neil.

I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it?

I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it? Is there any other way to play theese kinds of files without using Flip4Mac WMV?

Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
plus u may have to use double buffering techniques to make sure it starts up right away......
thelegendaryghost

HT201257 Holding down "D" no longer starts Apple Hardware Test! Any idea what's happened and how I fix it? Or do I need to go to the Genius Bar? MacBook Pro with Lion Preinstalled.

I have a MacBook Pro with Lion Preinstalled, so AHT was present on the hard disc and worked when the product was new. One of the first things I did from new was run AHT and it worked fine. But now it doesn't start - instead the machine (eventually) boots into normal OS X.
Holding down "D" no longer starts Apple Hardware Test! Any idea what's happened and how I fix it? Or do I need to go to the Genius Bar?
Software Mac OS X Lion 10.7.3 (11D50b), if it makes any difference.
Any ideas?

Thanks. However, even with an internet connection that doesn't work for me - the machine just (after an extended delay) boots normally. It doesn't download.
Option-D works for an Internet-based AHT. However that only works with an internet connection. It doesn't seem to download it and install it - it needs internet every time.
Any idea how my local copy of AHT disappeared? I haven't repartitioned the drive or knowingly deleted anything. And how do I reinstate it (because if you need AHT your hardware problems may preclude internet access!)?

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

My iPhone 4 just went black all of the sudden. I can't get it to turn back on and the battery wasn't dead. Anyone know what causes this and how to get it back on?

My iPhone 4 just went black all of the sudden. I can't get it to turn back on and the battery wasn't dead. Anyone know what causes this and how to get it back on?

This has happend to my ipod once...
did u keep it somewhere so tightly pressed??
that might be a reason. Don't worry it will turn on after some time, try connecting it to your computer or charger and see if it helps!!...

I recently downloaded an album and two of the songs on it play until about half way through and then cut out! What is happening and how do i get them back?

I recently downloaded an album and two of the songs on it play until about half way through and then cut out! What is happening and how do i get them back?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the entries, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?

My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?

Maybe:
iOS: Troubleshooting Messages

The autorotation function has stopped working in my text message app. only. It is working for all other applications. What has happened? How can I fix it. The autorotate is on.

The autorotation function has stopped working in my text message appnly. It is working in all other apps. The autorotation is turned on! What has happened? How do I correct this?

1. Try quitting the Messaging app
Double tap the Home button, hold the app icon until it wiggles, tap the red dot, tap the Home button twice
Relaunch
2. Reset: Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears

I'm trying to sync Contacts between my iMac ans my iPad 2 via iCloud and it's not working. In both devices, the option to sync Contacts is seleted. What is happening and how to sync these data?

I'm trying to sync Contacts between my iMac ans my iPad 2 via iCloud and it's not working. In both devices, the option to sync Contacts is seleted. What is happening and how to sync these data?

This is the ipod touch forum

After the Mountain Lion 10.8.2 upgrade my system is VERY slow, online connection down miserably. WHat has happened and how do I go back to 10.8.1?

Similar Messages

Maybe you are looking for