After updating to 4.3 I can't connect to wi-fi because the "internet speeds are too slow". How much speed does this require?
After updating to 4.3 I can't connect to wi-fi because the "Internet speeds are too slow". So what speed does it need?
I called tech support and I got the same **** canned response, backup and reset to factory settings. Yeah right! Everything was fine until Verizon shoved the software update down my throat. I finally unchecked the box in Wi-Fi settings for auto network switch. However, I still get the "Your Internet connection is unstable" warning no matter what Wi-Fi connection I hit.
In a related story, I received a new or refurbished phone as my original SIII had AC/charging connection issues. I called probably three times to attempt to back up my data, went into two stores in attempts to have them transfer the information over, and all were too incompetent and inept to assist me. Only when talking to someone about this Wi-Fi issue, did someone actually know how to back up everything. Of course by this time, I had to send the new phone back because Verizon charged me $400 before I got everything squared away. What a colossal waste of my time!
Similar Messages
-
after update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help
Connect your phone to iTunes on your computer like the diagram has indicated and restore the phone
-
How can I connect personal hotspot to use the internet from my phone on my laptop?
I do not have internet at home and want to be able to connect using the personal hotspot on my phone. How do i do this??
How much would be a month?
From: Verizon Wireless Customer Support <[email protected]>
To: kelly johnson <[email protected]>
Sent: Wednesday, October 8, 2014 12:02 PM
Subject: - How can I connect personal hotspot to use the internet from my phone on my laptop?
#yiv3595356488 img
|
|
|
A message from the Verizon Wireless Community
|
| |
How can I connect personal hotspot to use the internet from my phone on my laptop?
created by Verizon Wireless Customer Support in iPhone 4S - View the full discussion Hello kmj65
Thanks for replying. The plan you have it would be an additional charge to add the hotspot feature. It's not free with the Nationwide plan. You would need to add the feature online at www.verizonwireless.com/myverizon
JoeL_VZW
Follow us on Twitter @VZWSupport Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community Start a new discussion in iPhone 4S by email or at Verizon Wireless Community
|
|
© 2014 Verizon Wireless
Verizon Wireless
One Verizon Way
Mail Code: 180WVB
Basking Ridge, NJ 07920
Not interested in these emails anymore, or want to change how often they come? Update your email preferences by visiting https://community.verizonwireless.com/user-preferences!input.jspa.
|
We respect your privacy. Please review our privacy policy for more information
about click activity with Verizon Wireless and links included in this email.
|
|
| -
I just got a new iPod for Christmas, it says I can't connect it to iTunes because the "Apple Mobile Device service is not started." Help?
See Here > http://support.apple.com/kb/TS1567
-
When I try to sync my iPhone 4S with my computer, I get this message: "This iPhone cannot be used because the Apple mobile device service is not started" What does this mean, and how can I fix it?
means that apple mobile device service needs to be started try this article to get it turned back on
Restart apple mobile device service -
The most important piece of info about an update I need is how much data does it require. I am travelling and using prepaid data. I cannot even consider an update until I know how much data it will use. Please provide this information.
http://www.apple.com/feedback/macosx.html
-
i am getting a message - the iphone can not be used because the apple mobile devise service is not started - what does this mean - what do i need to do?
See Here... http://support.apple.com/kb/TS1567
-
Just restored and updated my ipod and now when I connect it to my computer I get a message saying "this ipod cannot be used because the Apple Mobile Device service is not started" what does this mean?
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
Can't connect to radio stations on the internet. What should I do?
Can't connect to radio station on the internet. It has stopped allowing me, and I don't know why?
DO oyu have a cellular data plan with your carrier? is Cellular data in settings/cellular/cellular data set to ON? Have you got USE CELLULAR DATA FOR set to ON for the services that you want to use cellular data for?
-
I have cleared the cache, reset cookies, etc. Nothing has worked. I can access these sites in Google Chrome but historically have used Firefox as my default browser. Should I switch to Google Chrome or is there a software fix?
As you can see in the attachment, I do not see the "I understand the risks" option. I am stopped dead in my tracks. I have reset Firefox, disabled add-ons, but nothing works other than switching to another browser.
The date, time and time zone are all correct on my PC. This problem existed in the most recent version of Firefox ESR as well. I switched to the most recent version of standard FF and that didn't help. I'm not sure when this problem started, but I used to be able to get to gmail through Firefox.
I have made no other changes to my PC that I can think of. I'm running up-to-date Win 7 Home Premium 64 bit.
Thanks for any help.
Harley -
My Iphone 3GS has a reactivation problem after the updates. The Itune continues to read an error message like this,``There is no sim card in the Iphone you are trying to reactivate```The phone read no service. I am using Orange Sim card which has a subscribtion with Apples in my area. Please help
Hey ugwujos,
Thanks for the question. I understand that you are experiencing activation issues with your iPhone. When troubleshooting activation issues, the following article provides some great steps:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Thanks,
Matt M. -
After doing the recent Apple TV update I keep getting a message asking if I want to hide the last application I was using on Apple TV. I understand how to go into the menu and select Hide or Show. I selected Show and the next time I use Apple TV I get this annoying message. Any ideas how to make this message go away?
To attempt a new chat session...
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
http://helpx.adobe.com/x-productkb/global/service1.html -
I can't open my e-books because I get a message saying the license key is damaged. How did this happen and how do I fix it?
Go back to the earlier version 1.72 After wasting 2 days on the problem this solved it. This is thanks to another user - no thanks to Adobe.
-
I can not connect to my itunes account because the message states that another user in using the account and this is not true.
After a visit to the apple store, they were able to get through my pass code but unfortunately I found out that is was a problem with the logic board. Since Apple only wants to sell and not fix, I was able to locate an iphone repair near me that deals with logic boards and they are currently working on it right now. i should be getting it back soon. Im not sure if the problem you are experiencing is the same as i went through but it does sound like it may be also a hardware issue and would suggest searching online for an iphone repair place that can diagnose what exactly is wrong. Hope this helps.
-
How can I connect to multiple Macs over the internet?
I have forwarded the ports on my Airport Extreme as follows:
10.0.1.3 being assigned to my Mac Mini.
I also have a MacBook Pro at home I would like access to which has the 10.0.1.4 reserved/assigned. I cannot connect to it because the port forwarding points to the Mac Mini, and it doesn't allow me to create another rule since those ports are already being used by that first entry. How do I go about having the option to connect to either one of the two computers at home when I'm at work using Apple Remote Desktop?it's not really a confirmed limitation of ARD, ARD is not designed to work outside of a LAN
it's designed for system admins to manage macs remotely while on the same LAN
but you want to use it outside of your LAN, you can by using VPN
VPN gives you remote secure access to your LAN
you will appear to be connected to your LAN
so you can do most things as you would if you were actually on your LAN
ARD does not facilitate a VPN connection
you'd connect using a VPN connection to your LAN then start ARD, ARD will behave just as it would if you were on the LAN
VPN client is built into OSX, system preferences, network, add choose VPN connection
You'd need a VPN server such as OSX server on your LAN
and configure any firewalls, routers etc to allow incoming VPN to connect to your server
You'd also need either a fixed external IP address and external domain name or use dynamic DNS setup
you could also try logmein
Maybe you are looking for
-
Problem since upgrade to Mountain Lion
I have a 2.4ghz Intel Core 2 Duo iMac with 4GB of RAM. Ever since I upgraded to 10.8.2 (well Mountain Lion in general) I have been having issues. I cannot connect to my work e-mail through mail any more and if I try to fix it, it freezes the computer
-
Why can't I free up space on my MacBook hard drive?
My MacBook has 2 GB of space left, so I moved over 60 GB worth of movies from iMovie HD (including the application itself) to a hard drive and deleted it all off my MacBook. I then emptied the trash and went to check the space left now and it STILL S
-
I mean I want to control the "start" and "stop" of a VI with another VI. Thanks
-
Hi all, A few days ago I had my mobile number changed because I had malicious calls from unknown numbers ect. But my old number still shows up in the line 1 when I view call logs and it also shows up when I connect my BB to my computer. How can I cha
-
Itunes 10.4 onto my PowerBook? G4
Can someone show me how to get Itunes 10.4 onto my PowerBook? G4