After updating to latest version of itunes i get error -3212 when trying to connect to itunes store, says not connected to internet. But internet status is ok and can use browser
just updated to the latest version of itunes for windows. i can't stream any of my radio stations and when i try to connect to the itunes store i get an error -3212 message saying i'm not connect to the internet, yet my browser works and my wireless status is ok.
I also had this issue when one day itunes stopped working for me on windows 8...
the error message I received first was: C:Programme files\common files\Apple\Apple Push service.dll is either not designed to run on windows or contains an error.
followed by: ITunes not installed Error 7 (Windows error 193)
Your response addressed how to fix this issue with earlier windows operating systems, but not for windows 8, so what ended up working for me was your advice applied a little differently. For anyone running windows 8 needing to know how to resolve this issue by repairing the Apple Application Support program, try following these simple steps - what a relief it was to have itunes working again after applying b noir's answer to the windows 8 operating system!
1. Swipe in from the right edge of the screen, tap Settings, and then tap Control Panel.
(If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, click Settings, and then click Control Panel.)
2. Click the Programs and Features icon.
3. In the list of programs and features, find the Apple Application Support feature and click to select it.
4. In the gray title bar above it, click Repair.
5. Approve the window prompts that follow until the repair has been completed.
6. Relaunch iTunes.
Hope this helps & good luck!
Similar Messages
-
I am Getting Error -3212 when trying to sign into itunes store
I Am trying to log into Itunes Store and I'm getting a message Stating Unkown Error (-3212)
Can anyone helpI have solved the problem, Itunes was blocked on my Firewall
-
I'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?
Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
I removed the battery in my att iphone 4 (gsm) osi 6.2? when i turned phone on i got pug into itunes screen. I did that and it said phone detected in recovery mode click update recover butten so i did. everything started liek t was working, i tunes showes verifing with apple but never make it past that point. itunes gives error message 1602. tried fixes, got error 22 tried fixes got error 11, tried fixesand got error message 1602. i then got advice from friend who wrks with iphones. told me get inrecovery, turn off. take out battery for min at least and put back together nad then try. i could not turn it on so plugged into wll charger and screen showed osi 6 and slide bar. slid bar and asked for my pw. put in and low and behold icon on screen telling me to plug into itunes. Did that and got error messge 1602 again and itunes neer went past verifing with apple.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
I have used the same Apple ID and computer for years with no changes even now, and suddenly I am unable to sync my iPod. When I authorize it and log in correctly, I get the (0x80092013) error again, as WELL as error (-50). This is extremely annoying! How do I fix this?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
After update to latest version of iTunes I can not sync iTunes to iPad
after update to latest version of iTunes I can not sync iTunes to iPad
You have WiFi Sync now! Go into Settings, General, and Click Wi-Fi Sync. Sync from there!
-
Problem after updating to latest version 10.0.1
After updating to latest version 10.0.1, every time Firefox starts it checks for add-ons compatibility before opening, this is very irritating. How can I stop this?
See:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved
It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available. -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
Hate iTunes 11. Reverted to the old version. Now I get a msg when I click to open iTunes stating, "The file "iTunes Library.itl" cannot be read because it was created in a newer version of iTunes" and it will not open. HELP!! How can I revert the library as well?
I hate iTunes 11 too... and I also want to revert to previous version. But Apple seems to be so incredibly customer-friendly these days that is quite deliberately not publishing clear/simple revert instructions. I think it's a disgrace that Apple removed Cover Flow without warning people who are tempted to upgrade. Absolute disgrace. And now we're stuck with this piece of ..
-
TS3694 getting error 3004 when trying to update to ios7
I keep getting error 3004 when trying to update to ios7
I was trying to update my iphone 5 to IOS7 and couldnt do it for 5 times then I did the following and was able to update it right away
Clearing your DNS cache may resolve the issue and enable you to connect to the iTunes Store.
The easiest way to clear your DNS cache is to shut down your computer completely and then restart. If you can't shut down, you can clear your DNS cache manually.
Click Start and choose Run.
In the dialog that appears, type “cmd” (don’t type the quotes) and click OK.
After the DOS prompt (C:\), type “ipconfig /flushdns” (without the quotes) and press Enter. Make sure you enter a single blank space after “ipconfig.”
Let me know if it solved the issue for you -
HT201210 keep getting error 3194 when trying to update ,what is this
keep getting error 3194 when trying to update,what is this
error code 3194 http://support.apple.com/kb/TS3694 Do you have the lastest version of iTunes? if not update.
-
After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of a solution." When I used the trial I never received this message. Now after purchasing it I receive this error each time I open PP and am unable to use. it. Any ideas or support to fix this issue?
What does the detailed crash report say?
And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers) -
Keep getting error 4002 when trying to update Genius
I haven't seen anyone write about getting error 4002 when trying to update genius in itunes. I select update genius and it gathers information and sends it to the itunes store I assume. And then waits a few seconds and then I get the following message "Genius results can't be updated right now. An unknown error occurred (4002) Please try again later." I've been getting this message for well over a month and I keep hoping they'll be an update or somehow it will magically be fixed, but nothing has changed. Anyone have any insight on this one?
The current ituned library it 123GB and is stored on external drives. It should also be noted that when I first turned on genius when it was released it went through this whole problem without a hitch. I just can't update Genius with any of the music I've added since then. I can't even get genius to recognize music that I got from the itunes store since I've had the problem.Be careful - this was a disaster for me. Once I did this, I got a different error - an error 4010 and in trying to recover, caused a lot of library issues that forced me to go to a backup to fix. You'll find a lot of people having the 4010 problem. Basically iTunes Genius is a disaster and Apple isn't fixing it.
-
My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Why do i get error 43 when trying to update iphone3
why do i keep getting error 43 when trying to update iphone3? very frustrating please help!
If you back up your device manually before syncing, you can restore it from that backup again. A manual backup does not include the sync process.
To backup manually do this:
Connect your iPod to your computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your iPod let iTunes erase all media content and restore your settings and app data from your manual backup afterwards.
Maybe you are looking for
-
Transferring documents from a PC to Mac Book Pro - permissions
I was using Dropbox to transfer "My Documents" on old PC to my new Mac Book Pro. I was losing some documents in the process, so decided to transfer with DVDs. I have now placed them into the Mac's Documents folder, but when I go into any of the doc
-
I have a Pavilian and hp deskjet f4480 that had been working fine up to two mns ago. Now the computer and printer don't seem to comunicate. The test page works fine for the printer. One other message is: There was an internal error, and Internet Expl
-
Changing registered "Name" only
I originally purchased CS2 for my Church. Our name was changed a year later and I want to register the CS2 under my new Church name. Is there a simple way to do this? Do I delete and reinstall? Thanks, Pastor Gary
-
Attaching u0093material photou0094 on the user tab of the material master transacti
All, We are exploring a solution for attaching material photo on the user tab of the material master transactions - MM01/MM02/MM03 in ECC6.0. Please review the questions outlined below from the client - - Is it feasible to attach a photo of mater
-
How does Webservices and EJB's differ?
I have to call some of the api's from the remote application.I just wanted to know which would be better approach to call those methods?Should i do with EJB or webservices?