After upgrade BPC from 7.0 to 7.5 NW we facing issue in Legal consolidation

Hi
After upgrade BPC from 7.0 to 7.5 NW we facing issue in Legal consolidation where in case of equity knock off the amount is not get balanced even after we run legal consolidation package in group currency.
Regards
Vikash

Hi sandeep ,
Hence the problem was not there with previous versions where the .js files were simply not compressed by default.
Solution :
I believe switching off javascript compression is a suitable option in this case as the script files are usually cached by the browser as well and will not be transmitted every time.
Kindly follow these steps:
1. Enter the J2EE Config tool.
2. drill down: Global Server Configuration->services->http
3. on the right hand side, click on NeverCompressed
4. on the bottom, add at the end: ,*.js
5. Apply the changes
6. restart the J2EE.
After this clear the browser cache and then log onto the portal and check if the issue gets resolve
I hope it will useful to you.
Thanks@ Re grads
G.srinu

Similar Messages

After upgrading application from WLS9.1 to WLS9.2.4 there are issues

Hi,
We are facing issue with application after upgrdation from WLS 9.1 to WLS9.2 MP4.
We are sending requests from Webserver to Weblogic and authentication is happening over Siteminder.
The application URL is getting appended by /cws due to which we are getting 404 error.
/csw/cswaction.do?action=main&node=cswusergroupnode&operation=showUsers ---------- This is returning 404.
correct URL is:
/cswaction.do?action=main&node=cswusergroupnode&operation=showUsers
Any Idea.. wht can be the issue.

Hi,
We are facing issue with application after upgrdation from WLS 9.1 to WLS9.2 MP4.
We are sending requests from Webserver to Weblogic and authentication is happening over Siteminder.
The application URL is getting appended by /cws due to which we are getting 404 error.
/csw/cswaction.do?action=main&node=cswusergroupnode&operation=showUsers ---------- This is returning 404.
correct URL is:
/cswaction.do?action=main&node=cswusergroupnode&operation=showUsers
Any Idea.. wht can be the issue.

Facing Parse Errors after upgrading database from 10g to 11g

Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        30 anonymous block
319e277050        57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
Suresh

Hi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards,

Problems with charts after upgrading APEX from 3.2 to 4.1

After upgrading apex from 3.2 to 4.1 the combination stacked bar/Stepline charts no longer works. Any help would be appreciated.
Thanks.

Hi "904055",
I believe the reason your chart is no longer working is because you are attempting to generate a chart type that is not covered by our AnyChart Flash charts license i.e. Stepline charts are not one of our support chart types. We only support the chart types exposed via the Application Express UI i.e. the chart types listed in the Create wizards. If you wish to create other AnyChart chart types, you will need to contact AnyChart directly, in order to obtain a separate license and swf file.
If you believe that your chart is only using chart types covered by our license, but are still experiencing issues, then please place a testcase on apex.oracle.com, post some login credentials, and I'd be happy to take a look.
Regards,
Hilary

How do I get iphoto to upgrade photo library after upgrading os from snowleopard to yosemite?

How do I get iphoto to upgrade photo library after upgrading os from snowleopard to yosemite?

To add to OT's advice:
You may need to delete your current iPhoto from the Applications folder, if it is a version of iPhoto '11, before the App Store will allow you to download it from the main page.
To locate iPhoto at the AppStore, open the "Featured" tab and enter "iPhoto" into the search field.

Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.

HT5012 Why my smart sim is no service after upgrade ios7 from iphone4

Why my smart and globe sim is no service after upgrade ios7 from ios 6?

Hi Kenshaine,
I am in the same situation and my 4s is facing the same issue..It seems APPLE cant help us!! ***!

There are some form errors after upgrading ebs from 12.1.1 to 12.1.3

Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan Ling

Hi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling

Problems after upgrading catalog from LR4 to LR5

After upgrading a LR 4 catalog to LR5, I moved some files around between sub folders. I then went to sync up the parent folder. The dialog box said that I would be importing 12,000 photos and deleting 12,000 missing photos. My folder structure for a ctalog is a parent folder named for the year and the sub folders with the date and shoot description. I was synchronizing the parent (year) folder. When it finished, the folder structure was correct and the photos were in their new(correct) folders. However, all of my LR4 adjustments that had been made in LR4 were gone. There was no history either. It was like I was importing for the first time.
I upgraded the original catalog again and the photos were in the original locations just like the first time I upgraded. I tried to sync an individual folder and it imported 50 new files and deleted 50 missing files. Again the LR adjustments were gone. Any suggestions on how to sync an upgraded catalog without losing my prior version adjustments?
Mac OS X 10.9.2
LR 5.3

Yes, synchronizing is not the tool you should be using in this case, when you move photos from one folder to another. The proper method is to reconnect your photos in Lightroom after you moved them via: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm. But your current catalog has lost its edit information, so this will not help on your current catalog. So ...
I hope you have a backup of the catalog file before you did the synchronization, or otherwise you will have to upgrade your LR4 catalog again. Open one of those and then reconnect as in the link.
As side advice, perhaps you might want to consider using an organizing technique that does NOT require moving phtoos/folders from here to there. You might want to consider using organizing and searching via keywords and captions and other metadata, which does not require moving photos, and does not require re-linking photos, and gives you the ability to place photos in more than one "category" (keyword), rather than with folders where a photo can be in at most one "category" (folder)

JDBC control not work after upgrade application from workshop 8.1 to 9.2.3

Hi,
We upgraded application from workshop 8.1 to 9.2.3. After that, the JDBC control not work any more. We got the following exception:
java.sql.SQLException: The transaction is no longer active - status: 'Committed'. No further JDBC access is allowed within this transaction.
at weblogic.jdbc.wrapper.JTSConnection.checkIfRolledBack(JTSConnection.java:192)
at weblogic.jdbc.wrapper.JTSConnection.checkConnection(JTSConnection.java:202)
at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:87)
at weblogic.jdbc.wrapper.Connection.getMetaData(Connection.java:435)
at org.apache.beehive.controls.system.jdbc.parser.SqlStatement.createPreparedStatement(SqlStatement.java:128)
at org.apache.beehive.controls.system.jdbc.JdbcControlImpl.execPreparedStatement(JdbcControlImpl.java:272)
at com.bea.wlw.runtime.core.control.internal.JdbcControlImpl.invoke(JdbcControlImpl.java:136)
at controls.SecurityBean.getUpdateDocPermission(SecurityBean.java:598)
at security.SecurityManagerImpl.getUpdateDocPermission(SecurityManagerImpl.java:110)
at security.SecurityManagerBean.getUpdateDocPermission(SecurityManagerBean.java:509)
The control that throw the exception has "transactionattribute" annotation added automatically by upgrade wizard during upgrading. Related classed are as follows:
@ControlInterface()
public interface SecurityManager
@TransactionAttribute(TransactionAttributeType.REQUIRED)
boolean getUpdateDocPermission(java.lang.String userId);
@ControlImplementation()
public class SecurityManagerImpl implements SecurityManager, Serializable
* @common:control
@org.apache.beehive.controls.api.bean.Control()
private controls.Security security;
static final long serialVersionUID = 1L;
* @common:operation
public boolean getUpdateDocPermission(String userId)
if ( security.getUpdateDocPermission(userId) > 0) {
return true;
else
return false;
@ControlExtension()
@JdbcControl.ConnectionDataSource(jndiName = "EventDesk")
public interface Security extends JdbcControl
static final long serialVersionUID = 1L;
* @jc:sql statement="select r.updateDoc from document_user u ,document_role r where u.login={userId} and u.roleId=r.roleId;"
@JdbcControl.SQL(statement = "select r.updateDoc from document_user u ,document_role r where u.login={userId} and u.roleId=r.roleId;")
int getUpdateDocPermission(String userId);
Thanks for your help

Hi. The issue is a level or two above JDBC. I suggest
opening an official support case. It's probably a
WLW issue.
Joe

Error in BPC Load infoprovider Package after upgraded BPC NW 7 to 7.5

Hi,
We upgraded BPC netweaver 7 to version 7.5.When we are trying to load the data from BI cube to BPC cube by using Load Infoprovider Package we got error.Please find the Error details below
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
Selection
InforProvide=ZBPC_IG
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\INFOCUBE_DATA_TRANS.XLS
CLEARDATA= No
RUNLOGIC= Yes
CHECKLCK= Yes
Messages
Task name CONVERT:
No 1 Round:
Cannot find document/directory
Application: CONSOL_IGAAP Package status: ERROR
I request you to guide to clear the issue
Other information
1. We are currently working in BPC 7.5NW SP04.
2. The problem occured while validating data to be uploaded from
Infoprovider.
3. We required to upload data from BI Infoprovider (ZBPC_IG) to BPC
Application.
Thanks
Vikas

Thanx
We upgrade BPC NW SP04.... I check my transformation file its ok because same transformation file file working in production on BPC 7.0 NW.
Regards
Vikash

Weblogic fails to start after upgrading obi from 11.1.1.5 to 11.1.1.6

Hi,
I performed an in-place upgrade on a 64 bit windows box from 11.1.1.5 to 11.1.1.6.
Installation was complete without any errors. Also, the RCU is upgraded.
When i start the weblogic server, it throws the following error:
at weblogic.t3.srvr.BootService.start(BootService.java:55)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesM
ager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerSe
icesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
at weblogic.Server.main(Server.java:71)
>
The WebLogic Server encountered a critical failure
Reason: Assertion violated
Exception in thread "main" java.lang.NoClassDefFoundError: Could not initializ
class weblogic.protocol.ServerIdentityManager$Initializer
at weblogic.protocol.ServerIdentityManager.findServerIdentity(ServerId
tityManager.java:64)
at weblogic.protocol.URLManager.findAdministrationURL(URLManager.java:
3)
at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote
erverLifeCycleRuntime.java:1078)
at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime
ava:431)
at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:41
at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:206)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:482)
at weblogic.Server.main(Server.java:71)
Appreciate you help in resolving this.
Thanks,
Vineeth

Hi,
after upgrade did you rebooted your pc? try to reboot and double confirm below steps,
1) Once complete obiee11gv6 product installer
2) you need to run psa.cmd run as administrator (the two schema need to be upgraded :MDS & BIPLATFORM)
3) upgradenonj2eeapp.bat need complete for more refer my blog
http://obieeelegant.blogspot.com/2012/07/in-place-upgrading-of-obiee-111150-to.html
Thanks
Deva

Error "EPCF Undefined" in URL Iview after upgrading portal from 7.0 to 7.3

Hi All,
We have upgraded our portal from 7.0 to 7.3 recently. After upgrade when we are trying to open URL iviews(which will open a page in a sesparate window) it is giving some error in left bottom corner of browser. The error is as follows
Message: 'EPCM' is undefined
Line: 463
Char: 1
Code: 0
URI: http://<host>:50100/irj/portal?NavigationTarget=navurl://25fd58cd6bc575491c6b9c692e5debd6&InitialNodeFirstLevel=true&windowId=WID1318828789495
Please let me know the solution to solve this issue.
Thanks & regards,
Sandeep

Hi sandeep ,
Hence the problem was not there with previous versions where the .js files were simply not compressed by default.
Solution :
I believe switching off javascript compression is a suitable option in this case as the script files are usually cached by the browser as well and will not be transmitted every time.
Kindly follow these steps:
1. Enter the J2EE Config tool.
2. drill down: Global Server Configuration->services->http
3. on the right hand side, click on NeverCompressed
4. on the bottom, add at the end: ,*.js
5. Apply the changes
6. restart the J2EE.
After this clear the browser cache and then log onto the portal and check if the issue gets resolve
I hope it will useful to you.
Thanks@ Re grads
G.srinu

Can not import SVG in FrameMaker after upgrading CS from 3.X to 6.0

We have upgraded Adobe Design CS from 3.x to 6.x. After the installation, everything worked in normal except one problem - we could not import svg in all FrameMaker software. This problem occurs in the CS6 version installed on those computers. Please comments!
Thanks in advance for your help!

Hi
Generally while doing upgrade some Object gets inactive to activate that we do few steps, those steps are called post upgrade. this is the one of the step in post upgrade activity. what this will repair the objects after upgrade.
Generally we run the Program RSUPGRCHK through SE38 after upgrade, the output of the program will show the inactive objects. collect those objects and repair through RSD1 and then recheck again with the same program.
Regards,
M Kalpana.

Unable to Sign in analytics After Upgraded obiee from 10g to 11g

Hi all,
I have problem when upgrading catalog from 10g to 11g.
The error is:" Unable to Sign In . An invalid User Name or Password was entered. "
I upgraded following the steps like this:
1.Login EM and check BI server is running successfully.
2.Started the UA.bat.
Select the operation:Upgrade Oracle BI RPD and Web Catalog.
Step by Step,and the upgrade completed successfully.
3.Open the RPD online using the Admintool succefully.
4.But when I Login the BI and view the dashboard with the 10g's user (Administrator),the page appear the error "*Unable to Sign In . An invalid User Name or Password was entered.* "
5.Then I Try to Regenerating User GUIDs
1. Update the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI:
a. Open NQSConfig.INI for editing at:
b. ORACLE_INSTANCE/config/OracleBIServerComponent/coreapplication_obisn
c. Locate the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter and set it to YES, as follows:
d. FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES;
e. Save and close the file.
2. Update the Catalog element in instanceconfig.xml:
a. Open instanceconfig.xml for editing at:
b. ORACLE_INSTANCE/config/OracleBIPresentationServicesComponent/
c. coreapplication_obipsn
d. Locate the Catalog element and update it as follows:
e. <Catalog>
f. <UpgradeAndExit>false</UpgradeAndExit>
g. <UpdateAccountGUIDs>UpdateAndExit</UpdateAccountGUIDs>
h. </Catalog>
i. Save and close the file.
3. Restart the Oracle Business Intelligence system components using opmnctl:
4. cd ORACLE_HOME/admin/instancen/bin
5. ./opmnctl stopall
6. ./opmnctl startall
7. Set the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI back to NO.
Important: You must perform this step to ensure that your system is secure.
8. Update the Catalog element in instanceconfig.xml to remove the UpdateAccount GUIDs entry.
9. Restart the Oracle Business Intelligence system components again using opmnctl:
10. cd ORACLE_HOME/admin/instancen/bin
11. ./opmnctl stopall
12. ./opmnctl startall
BUT THE ERROR ALSO EXISTING!
So,waiting for the help,thanks!

Hi,
if your using oracle db please make sure your db settings and tnsnames.oRA settings
also try you please try below troubleshooting steps:
1) please check latest error message and find the root cause,
presentation catalog log path:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIPresentationServicesComponent\coreapplication_obips1\sawlog0.txt file
also check it nqserver.log file
oracle bi server log path ref:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\nqserver.log
2)can you try to login RPD,EM and console by using your weblogic a/c then try to login with some other user.
if its not working then try to delete that users from catlog and check it Check OPMN services are running state.
e.x:
C:\Oracle\Middleware\instances\instance1\bin>opmnctl startall
opmnctl startall: starting opmn and all managed processes...
C:\Oracle\Middleware\instances\instance1\bin>opmnctl status
Processes in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 4992 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 2420 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 1856 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 5684 | Alive
coreapplication_obis1 | OracleBIServerCom~ | 5232 | Alive
3) Refresh GUIDs and Restart WebLogic and OPMN Services then try it again...still if your getting same issues then try to
check DB(try to login and confirm) and check it RPD --> physical layer connection pool setting and try to
view physical data.
also paste it your latest error log message (nqserver.log and sawlog01.log message) here
THanks
Deva

After upgrade BPC from 7.0 to 7.5 NW we facing issue in Legal consolidation

Similar Messages

Maybe you are looking for