After upgrade to latest firmware canon network printer won't print

after upgrade to latest firmware canon network printer won't print. It's a canon MP540 on a wireless network. It will print a test page but won't print from any application, just sits there with the message 'copying print data'!
Running Mac OS X Lion 10.7.2 (11C74), with firmware SMC Version (system): 1.73f63.
Any help gratefully received.

First off if you can print a test page there is absolutely no reason you wouldn't be able to print from a application...none. But stranger things have happened now that we have Lion. Within the application are you selecting the wireless printer........just had to check.
I have the MP620 which is simlar to your MP540 and have no problems printing from my MBA (June 2011). I too have the latest firmware and software......without problems printing.
A few things I'd try would be to remove the wireless printer from your computer (in Preferences, printers), restart, and repair permissions. Then add the wireless printer back, and see if it works. If not.....power OFF the printer and turn back on.
If the above fails reinstall the printer driver (yours) I think you will have to plug in the USB cable.
Keep me updated and I'll tyr and help!

Similar Messages

After upgrading to Lion, my Canon 7d can not be found.

After upgrading to Lion, my Canon 7d can not be found. I have used the USB connection to connect to my camera for several years with no problems, until now. I have reset the SMC, by powering off the computer and unplugging everything for approx 30 minutes. There are no new drivers available and any assistance will be appreciated.

I was having the same issue after upgrading to Lion OSX. I searched the web and found many people had the same problem but no solution so...
I called Canon and they told me to run 'Image Capture' its part of the Canon Software Suite so you should have it and then try downloading the pictures like you usually do. I use 'Image Browser' and with 'Image Capture' running in the background it works perfectly now.
Hope this helps!!

After upgrading to iOS 8.0.2, I can't print from my iPhone 5s

After upgrading to iOS 8.0.2, I can't print from my iPhone 5s. My iPhone 4s and iPad continue to print. When I try to print to either printer, the message reads,"contacting printer," and then, "preparing to print." But nothing prints.

Following ultimately helped me : Make sure that you are logged in at the App Store App or iTunes App with your apple ID and password with a US account. Turn your iPad off and on and than you should see the Radio button again. It won't work if you are logged on with a foreign account. If you are not logged in at all, it worked, too.

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

Nicholas...
You may need to restart the Apple Mobile Device.
Follow the instructions here > iOS: Device not recognized in iTunes for Windows

Imac won't boot after upgrade to latest Yosemite

After Upgrading to latest Yosemite version - my Imac will not start - it just hangs there or eventually comes with Crash window tellling it will restart.
However the Imac does launch in safe mode - holding down the shift key -but then there is no sound - so that no good.
Can you solve this you will be the christmas hero in Danish land.
NB sofar I have tried
reset PRAM- reinstalled Yosemite - Verified Disk is ok.
iMac (27”, ultimo 2009) - 2,66 GHz Intel Core i5
Yosemite 10.10.1 (14B25)
Latest crash log
nonymous UUID: 273AE997-AFAA-D71B-8080-9D38EA80ADEB
Sat Dec 27 19:52:13 2014
*** Panic Report ***
panic(cpu 1 caller 0xffffff800d01e80a): Kernel trap at 0xffffff800d1338c3, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000010689fb25, CR3: 0x0000000124a97000, CR4: 0x0000000000002660
RAX: 0xffffff801aaa5df8, RBX: 0x00bfbfbf00bfbfbf, RCX: 0x0000000009000000, RDX: 0xffffff800d6f42d0
RSP: 0xffffff80a69bb460, RBP: 0xffffff80a69bb4b0, RSI: 0xffffff80a69bb507, RDI: 0xffffff800d6f42d0
R8: 0xffffffffffffffe9, R9: 0x000000000000003a, R10: 0xffffff8077cf3008, R11: 0x0000000000000000
R12: 0xffffff80a69bb4f0, R13: 0x0000000000000017, R14: 0x0000000000000017, R15: 0x000000000000031b
RFL: 0x0000000000010206, RIP: 0xffffff800d1338c3, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000010689fb25, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80a00bde10 : 0xffffff800cf3a811
0xffffff80a00bde90 : 0xffffff800d01e80a
0xffffff80a00be050 : 0xffffff800d03a443
0xffffff80a00be070 : 0xffffff800d1338c3
0xffffff80a69bb4b0 : 0xffffff800d331348
0xffffff80a69bb5a0 : 0xffffff800d331d55
0xffffff80a69bb740 : 0xffffff800d32aab9
0xffffff80a69bb7d0 : 0xffffff800d340ccf
0xffffff80a69bb9a0 : 0xffffff800d13f2f8
0xffffff80a69bba80 : 0xffffff800d13ea95
0xffffff80a69bbbb0 : 0xffffff800d152005
0xffffff80a69bbc00 : 0xffffff800d15fcc7
0xffffff80a69bbf20 : 0xffffff800d154f0a
0xffffff80a69bbf50 : 0xffffff800d44dcb2
0xffffff80a69bbfb0 : 0xffffff800d03ac46
BSD process name corresponding to current thread: WindowServer
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x000000000cc00000
Kernel text base: 0xffffff800ce00000
__HIB text base: 0xffffff800cd00000
System model name: iMac11,1 (Mac-F2268DAE)
System uptime in nanoseconds: 88678398319
last loaded kext at 88213280354: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7f8f484000, size 28672)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHDAHardwareConfigDriver 267.0
com.apple.driver.AGPM 100.14.37
com.apple.driver.AppleTyMCEDriver 1.0.2d2

Hello snake-apps,
Welcome to Apple Support Communities.
The article below provides troubleshooting tips that’ll help resolve kernel panic issues, like the one that you’re seeing with your iMac after upgrading to OS X Yosemite.
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Ciao,
-Jason

WLC 2504 Hangs after upgrading 7.4 firmware

Hi All
We have WLC2504 ( Upgraded to Firmware 7.4) and AP'S are AP 1602
When Wirless Controller trying to Connects AP'S then they are hanging and same is happening for AP'S os we are not able to do configuration.
Pinging continous is breaking for WLC IP Address.
We have upgraded to Latest Firmware 7.4...
I have read that this is Bug in Firmware 7.4....What is the work around??
Thanks

Hi,
Make sure your WLC 2504 is sync with the NTP Server.

After upgrading to latest version of iTunes it will not remember my podcast password as it did before

After upgrading to latest version of iTunes it will not remember my podcast password as it did before

Hey becky612,
Thanks for the question. I understand that your iPod nano is not recognized in iTunes after updating. The following troubleshooting articles may provide a resolution based on your symptoms:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M.

After upgrading to latest IOS while playing games screen is flickering

While playing games screen is flickering after upgrading to latest IOS.

I have taken it out of the case - I figured it would obstruct the sensor (also have no screen protector).
Only thing I haven't tried from the Basic troubleshooting steps you mentioned was to "restore as new".
That I did try it tonight (succesffully restored), BUT my problem still exists.
You mentioned to go in the MAC store > Would they replace it (for free) if they reach the conclusion it's some sort of manufacturer faulty wiring even if it's a 3Gs (as an old model)?
Would they still if phone had water damage (this I'm just curious - the phone didn't)?

After upgrading my iphone firmware i'm unable to activate via wifi and is not able to recognise my sim card

after upgrading my iphone firmware i'm unable to activate via wifi and is not able to recognise my sim card

Try a reset: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Iphone 5S issue after upgrade to latest version 8.1.2

hi,
recently i upgrade my phone to latest version 8.1.2 , brought me 2 new issue
1) siri - sometimes can't awake when using speak command " hey siri " in charging mode
2) battery stability - Battery start behave strange after > 35% , can drain to 19 or less in a seconds, previous version able to sustain until 3% before the device ready to switch off, now the device dead in 19~10% force device to shut off , when put the charging cable to phone turn on with battery meter approximately 30% >
i have this issue quite sometimes after upgrade to latest version
3) app crash- the devices sometimes crash, quit the app or freeze but this rarely happen
hope can come out some version to fix above matters, which can be such annoying especially the second issue as highlighted.
thank

RESOLVED - I can't believe it, but I have actually figured this out.
Getting frustrated with going in circles, I decided to dig into security options. First off, I opened Windows' Properties for the start-up icon for InDesign. Right off, I noticed under the Compatibility tab that InDesign was set to run in Compatibility Mode for Windows XP (Service Pack 3). This did not seem right, so I turned off the option to run in Compatibility Mode and re-started up InDesign. Low and behold, the option Window | Mini Bridge was now displayed! And it worked!
Sorry to have bothered you gentlemen with this problem. I really appreciate your assistance!
Mark.

After upgrade to snow leopard, my printer won't print

I recently upgraded my operating software to snow leopard, but now my wireless printer won't print any jobs coming from my Mac. The printer icon is still in the dock, but every time I try to print something I get an error message, and it won't print. When I go to my system preferences, it is still listed there.
Anyone have any ideas?

Because you control what's posted in your profile, not what the computer is running. Go here and update your product info.

Canon Selphy CP730 won't print anymore

After installing the latest iPhoto (7.0.2) my Canon Selphy CP730 Compact Photo Printer won't print photo's from iPhoto anymore. The light on the printer blinks for a second, goes red and then back to green, while an icon in the Dock shows the CP730 with a red exclamation mark.
The strange thing is that I can print from all my other applications to this device. And with the previous iPhoto there where no problems either. I already reinstalled the drivers for the CP730, without succes.
Any suggestions?
Thanks in advance,
Michel

Michel:
Try deleting the various printing pref files. One would be located in the User/Library/Preferences/ByHost folder. It would look something like this: com.apple.print.Cache.0016cb3791b6.plist (number will be different). Also com.apple.print.PrintingPrefs.plist and any obvious Canon prefs for the printer. There will be a lot of other Canon prefs but look of any that are obviously linked to the printer. You may not fine any, however.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Canon IP7250 - Color won't print - Please help

I have a Canon IP7250, two day ago, my printer showed me error C000. I resolved this error, but now my printer won't printing in colour. Black working properly. I tried many times to cleaning a toner in mainteace. When I go to "print head alignment" then shows error 2500. ? In nozzle check black colour is excellent but no other colors on paper.
Please, help me.
Thanks.

Again, the username/password, would either be your logon username/password or your "root" username/password if you have enabled it.
Another option would be to update your CUPS software. Multi-functional printers are usually "tricky" to get full-featured drivers for. It's possible that a newer version for this particular printer may exist with an update.
Still another option (and possibly a better one) would be to download and install the latest Gutenprint printer drivers. These were formally known as Gimp-Print drivers. (ref: http://gimp-print.sourceforge.net/MacOSX.php3)

After Update printer won't print to pages but will to emails

My iMac Intel did an update and since it was done my printer won't print for pages but if I print an email it will print.

Update Pages to the most up-to-date version and then restart the computer while resetting the PRAM. If you don't know how to do a PRAM reset, please click Intel iMac SMC and PRAM resets. If that does not fix it then please post back and we can take some other steps.

We installed a new router and changed the name of the router. Now my HP C4500 printer won't print.

Our cable company installed a new wireless router and changed the name of the router. Now my HP C4500 printer won't print from my laptop.
I can't find any ot the Set Up stuff I used initially.
Is there any way to get my printer to work again...wirelessly?

Get the latest software for your printer from the "Support & Drivers" link at the top of this page. When you start the installation it will ask what kind of installation you would like. Choose "Wireless" or "Network" then click "Next".
Eventually it will ask you to plug in a USB cable to the printer temporarily to communicate the new router's info to the printer. Make sure to not plug in the USB until it asks.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

After upgrade to latest firmware canon network printer won't print

Similar Messages

Maybe you are looking for