After upgrading from ASA 8.2 to 9.1(2) not able to get web site

Dears,
ASA Version has been upgraded from 8.2 to 9.1(2). Since then, website is not accessible from outside.
Diagnosis:
Many web sites are deployed behind the ASA. When anyone accesses website from outside, the following error is reported: The page cannot be displayed. No issues have been reported with any other websites.
In the ASA, two different public subnets are in use in order to allow accessing the website from the public domain. No issues have been reported so far with the first subnet. The website is mapped to a public address in the second subnet. When the website is mapped to an IP address in the working subnet, the website is accessible from outside. As a workaround, this is applied and the website is up and running.
As the website is working fine with the second subnet, NAT and ACL configuration is fine. We have turned on logging in the ASDM, but no traffic was observed on the ASA for the non-working subnet. On the other hand, the traffic was noticed on the ASDM for the working subnet.
The working subnet is XX.YY.XX.X
Non working subnet is XX.YY.YY.X
The outside interface ip is XX.YY.XX.X (Working Subnet)
Tried to assign one ip address to the PC from non working subnet and connected to the Switch , its pinging from outside

Hi
Have you tried using packet tracer?

Similar Messages

After upgrading from 4.6C to ECC 6.0 templates not working in smartform

Hello,
After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
Please note - Text elements doesnot have any conditions present in the condition tabstrip.
Thanks,
Abhishek

Hi,
After the upgrade, you will have to do the security upgrade.
Please follow these steps.
1. Go To SU25
2. Run step 2A to 2D.
3. In step 2C, you shall get the list of all the affected roles.
Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
Note: You can open the same role in the unupgraded system to check.
4. Provide the access to the required authorization objects.
5. Disable the unwanted authorization objects.
6. Generate the profile.
7. Follow the same steps for all the affected roles listed.
Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
8. After step 2C, complete 2D.
Regards,
Imran

After upgrading software on my iphone 5. I am not able to in app purchases. I have tried to turn of the restrictions and it is still not letting me make purchases.

After upgrading software on my iphone 5. I am not able to make in app purchases. I have tried to turn off restrictions and still not able to make in app purchases. Can anyone help me?

If there are no restrictions engaged and you are not receiving any Error messages or Alerts...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I would like to upgrade from 10.6.8 to Yosemite but am not able to install it. What should I do?

I would like to upgrade from OS X 10.6.8 to Yosemite. I went to the Yosemite web page but there was no download button which I could click. What should I do? Thank you.

Try using one of the 2 links in the right sidebar. One under Categories and one under Free.
Try booting into the Safe Mode. If that doesn't work, set up another admin user account and try from there.
Safe Mode - About
Safe Mode

ORA-12541: TNS:no listener after upgrading from 11.1.0.6 to 11.1.0.7

After upgrading from 11.1.0.6 to 11.1.0.7, I get the error: ORA-12541: TNS:no listener.
I have attached my tnsnames.ora, listener.ora and my sqlnet.log.
I have tried deleting the listener and re-adding it and I get the same error.
I have tried adding a new database and it errored at 97% because it couldn’t connect to the listener, but still seemed to create the database.
Any suggestions would be appreciated
My tnsnames.ora file:
# tnsnames.ora Network Configuration File: C:\Oracle\product\11.1.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = tebxjt)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
my listener.ora file:
# listener.ora Network Configuration File: C:\Oracle\product\11.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = tebxjt)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
my sqlnet.log:
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=tebxjt)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)(CID=(PROGRAM=C:\Oracle\product\11.1.0\db_1\jdk\jre\bin\java.exe)(HOST=tebxjt)(USER=739179))))
VERSION INFORMATION:
 TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
 Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 21-JUL-2010 16:53:37
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0

Hi,
What is your ORACLE_SID name of your database. Have you checked in given above output there is two things:
1.
Service "orcl.us.oracle.com" has 1 instance(s).
Instance "orcl", status BLOCKED, has 1 handler(s) for this service...
Service "orcl_XPT.us.oracle.com" has 1 instance(s).
Instance "orcl", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
The status BLOCKED is coming instead of READY
2. From
+"+
+my listener.ora file:+
+# listener.ora Network Configuration File: C:\Oracle\product\11.1.0\db_1\network\admin\listener.ora+
+# Generated by Oracle configuration tools.+
+LISTENER =+
+(DESCRIPTION_LIST =+
+(DESCRIPTION =+
+(ADDRESS = (PROTOCOL = TCP)(HOST = tebxjt)(PORT = 1521))+
+(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))+
+)+
+)+
Here what i feel complete linstner.ora should be have two parts one LISTENER and another SID_LIST_LISTENER :
LISTENER =
(ADDRESS_LIST=
 (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
 (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
SID_LIST_LISTENER=
(SID_LIST=
 (SID_DESC=
 #BEQUEATH CONFIG
(GLOBAL_DBNAME=salesdb.mycompany)
(SID_NAME=sid1)
(ORACLE_HOME=/private/app/oracle/product/8.0.3)
In your case SID_LIST_LISTENER part is missing.
In this part you have to set SID_NAME and ORACLE_HOME value of new 11g home.
Hope this will help you.
Regards
Rajinder

After upgrade from 10.2.0.1 to 10.2.0.4 enterprise manager not working

after upgrade from 10.2.0.1 to 10.2.0.4
on windows enterprise manager is not working
Edited by: 830525 on Mar 24, 2012 9:44 AM

F:\Documents and Settings\hakem>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://M1C3:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleor
cl service is starting..........................................................
The OracleDBConsoleorcl service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
F:\Documents and Settings\hakem>NET HELPMSG 3547
A service specific error occurred: ***.
EXPLANATION
A service-specific error occurred.
ACTION
Refer to the Help or documentation for that service to determine the problem.
that's what happen while trying to start db console

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Sunone console not opening after upgrade from DS5.2 patch 3 to patch 4

Hello,
The Sunone Console is not opening when i upgrade from Directory server 5.2 patch 3 to patch4. I getting the following error message
"error 501 Cannot logon because of an Incorrect userid,incorrect password or directory problem"
can u please guide me. how can i solve this problem.
Regards,
Srini

So while this certainly isn't the most elegant of solutions, and most assuredly isn't in the realm of supported by Oracle...
I've used the DBMS_IJOB.DROP_USER_JOBS('username'); package to remove the 194558 orphaned job entries from the job$ table. Don't ask, I've no clue how they all got there; but I've prepared some evil looks to unleash upon certain developers tomorrow morning.
Not being able to reorganize the JOB$ table to free the now wasted ~67MB of space I've opted to create a new index on the JOB$ table to sidestep the full table scan.
CREATE INDEX SYS.JOB_F1_THIS_NEXT ON SYS.JOB$ (FIELD1, THIS_DATE, NEXT_DATE) TABLESPACE SYSTEM;The next option would be to try to find a way to grant the select privilege to the role without using the aforementioned "after CREATE on schema" trigger and dbms_job call. This method was adopted to cover situations in which a developer manually added a table directly to the database rather than using the provided scripts to recreate their test environment.
I assume that the following quote from the 11gR2 documentation is mistaken, and there is no such beast as "create or replace table" in 11g:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9003.htm#i2061306
"Dropping a table invalidates dependent objects and removes object privileges on the table. If you want to re-create the table, then you must regrant object privileges on the table, re-create the indexes, integrity constraints, and triggers for the table, and respecify its storage parameters. Truncating and replacing have none of these effects. Therefore, removing rows with the TRUNCATE statement or replacing the table with a *CREATE OR REPLACE TABLE* statement can be more efficient than dropping and re-creating a table."

Lost Developer Toolbar after upgrade from 4.1 to 4.2

After upgrading from 4.1 to 4.2.1.00.08, we have lost the Developer Toolbar.
Have others run into this with the upgrade or fresh installation of 4.2.1?
If so, what suggestions are there for fixing, short of reinstallation mentioned in this other thread:
{message:id=10692572}
Following the guidance there to look at the instance ID and other preference settings, I compared our three instances. The two that are not having the problem are both at 4.2.0.00.27.
Here are the preferences that exist on our other instances but are null on the problem instance:
APEX_4_1_0_PATCH_12920544
APEX_4_2_0_PATCH_14777994
APP_EXPORT_TO_DB_ENABLED
HPROF_DIRECTORY
INSTANCE_ID
MOBILE_DEVELOPMENT_ENABLED
PRINT_SVR_HOST
PRINT_SVR_PORT
PRINT_SVR_SCRIPTI have asked our support team to review the upgrade log. Re-installation from scratch is an option.
Any advice is welcome.
Skip

Thanks, Joel.
You inspired me to take a closer look, and look beyond the upgrade.
After the upgrade, my application passed a superficial checkout. Later, I exported my application and in the export file, the Instance ID was not NULL. I had not noticed any problems with how APEX was working.
The problems of the missing Developer Toolbar, Instance ID = NULL, and a new one, did not occur until I removed my application and tested a clean installation of the workspace and application. This is the sequence of events. The immediate triggering cause is clearly one of the following:
1. Deinstall application (ID 820) from APEX 4.2.1.00.08 instance, running 11g (11.1.0.7.0).
2. Remove workspace (PVA_AH9_R12)
3. (drop the parsing schema, xxpva, and related tablespace)
4. (create tablespace and schema user, xxpva)
5. Import workspace (PVA_AH9_R12) from an APEX 4.2.0.00.27 instance.
6. Import application (ID 820) including supporting objects from an APEX 4.2.0.00.27 instance, running 11g (11.2.0.1.0).
The next day I noticed the Developer Toolbar missing problem, and found that Instance ID is NULL.
Also, after Exporting an application in Database format, I cannot download the file from the Export Repository. When I click the filename link, I get 'Access Denied' instead of the normal download dialog.
Does this suggest anything else I should look into?
Do you think I should post this as a new problem/question with more detail about the sequence of events?
Skip

SSO and Portal down after upgrade from AS 10.1.2.0.2 to 10.1.2.3

SSO and Portal is down after upgrade from AS 10.1.2.0.2 to 10.1.2.3. All others are running fine. Any similiar experience and solution?
Thanks.
Andy

cn=XXX information is missing for the SSO Server (orasso) when going to http://servername:7777/pls/orasso/orasso.home. Is that causing the problem? If so, how can I resolve it?
Thanks.
Andy

Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
machine 10.6.1. with RDC 2.0.1 (non-working)
9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
Any help would be appreciated

Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

My iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3

y iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3 - any solutions out there?

Thanks - got stuck with the upgrade to 10.6.8, but Apple Support was able to navigate me through that, the date settings caused a problem here.

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.

Hey hvbnfrgvn,
Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
I hope this information helps, please keep me posted on how it goes.
Best of luck and have a great day!
I worked on behalf of HP.

Problems after upgrading from 10.2.3 to 10.2.8

After upgrading from 10.2.3 to 10.2.8, itunes "unexpectedly quits" when I try to purchase a song, and safari "unexpectedly quits" when I visit certain websites. Before upgrading, no such problems.

Hello rick,
First of all, welcome to the Apple discussions.
* How did you upgrade the OSX 10.2.3??
* Did you use the combo update?
* Did you run the dick repair permissions before an after
Here is the Combo Update for OSX 10.x
Combo Update
An here is how you use the disc repair permissions
About Disck Repair Permissions
Applications Quits
Let me know if so ...
Discussions is a ongoing process. Hope to see you around anytime you need us, or can offer help to others.
Dimaxum <]:~))

After upgrading from ASA 8.2 to 9.1(2) not able to get web site

Similar Messages

Maybe you are looking for