After webcatalog migration from 10.1.3.3 to 10.1.3.4.2 not able to see user

Hi Gurus,
I am facing an issue with web catalog migration.
Currently we are on 10.1.3.3 version and upgrading to 10.1.3.4.2.
As part of migration i have taken the RPD, NQSConfig, Web catalog, instanceconfig.xml files as backup. i followed manual way while taking the web catalog backup i.e zipped(tar) the prod catalog and moved it to some folder.
After 10.1.3.4.2 installation i have moved this zip file to the /OracleBIData/web/catalog and unzipped it. restarted all the servers. when we logged in presentation services we are not able to see the reports which we saved in "My Folder" when it comes to the reports which we saved in "Shared Folder" i am able to see all the reports and dashboards.
to debug this further i opened the web catalog by using web catalog manager and found out that all the reports and .atr files are there under that user ( USER folder, corresponding user folder ), and instead of my presentation server recognizing this folder its creatin new folder for the same user.
Because of this issue our release plans are getting postponed, please advise me.
what could be the problem and if i have done some thing wrong while taking the backup pls let me know the best way of backing up the web catalog.
Thanks,
Seshu

try this:
Archive all folders from 10.1.3.3 using catalog manager.
Update instance config on 10.1.3.4.2 so that it'll create a new webcat, open it and unarchive above folders.
If helps pls mark

Similar Messages

  • Shared folders not visible after the migration from 10.1.3.2.1 to 10.1.3.4

    Hi All,
    After the migration from 10.1.3.2.1 to 10.1.3.4., we are not able to view the shared folders after clicking on the answers link.
    Can you please let me know how can i resolve the same.
    Thanks in Advance
    Siva.

    Hi,
    Please check the catalog folder that user privilege and manage permission.
    Thanks
    Deva

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • How can I prevent firefox from displaying an overall black page after I request a topic search in the google/firefox search box? Not able to see results

    I loaded Mozilla v31 on my PC laptop which uses Windows XP operating system with all current updates. When I click on my internet icon, it leads me to the Mozilla page with a Google search bar. Once I type a topic in and click for the search to begin, the Firefox page turns all black and I am not able to see any results or action being taken. I click on the back arrow and enter a new topic, and click on search button, it repeats the same behavior and the Firefox page turns black. Essentially Mozilla Firefox is not a usable browser unless I can fix it. Help!

    When this happens, has the address bar changed to a google.com address or is it still blank?
    Some graphical glitches are caused by an incompatibility between Firefox and your graphics card drivers. The standard workaround for bypassing this is to disable Firefox from using hardware acceleration. You can make that change here:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    That will take effect the next time you exit Firefox and start it up again.
    More generally:
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * (menu bar) Tools > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?

  • Could not able to see my customized BP after Importing

    Hi
    I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
    I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
    I did not deleted the Standard BP from PCD/Migrated Content
    After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
    I could not able to see the Customized BP in PCD….. , Whether that Standard BP should be deleted before Importing
    What is the Default location it stores after importing?
    Plz help me to solve this issue its very urgent.
    Regards

    Hi Sanjay,
    There is no need to delete the Standard BP from PCD/Migrated Content.
    After customizing the business package and storing the content in your own folder, you have to add all objects to new transport package(by right clicking on main folder)then export it and download the epa to your local system.
    After importing the epa in some other portal, BP will sit under same path you have specified while creating business package(PCD).In sense, it will create the same PCD structure when you import epa in some other portal.
    You might have done some mistake while creating transport package and exporting it to your local system. You might not have added all object to new transport package.
    Hope this is of some help. Do write back in case you need further clarification
    Cheers
    Ruchi.

  • Not able to see the tree on the jspx page after running

    Hi All,
    This is something strange.I am dragging the VO on the page fragment from the data control as adf tree. And I am using the panel collection as component for adf tree.
    After running the jspx when I am moving to the fragment I am not able to see the tree.
    However when I am running the AM it is working properly for the view objects and view link used to populate the tree.
    Can anybody put some thoughts on this.
    Thanx
    Kanika

    Thnx for your replies..
    I am dropping taskflow as region . I am not using the switcher component.
    On left side of the page the tree is visible now. but the taskflow is not refreshing on the click of the tree node based on the value of the node.
    Please advice how to accompolish this now??

  • Not able to see Employee type supplier after upgrade to 12.1.2

    We have custom responsibility for Payables Manager, after upgrade to 12.1.2 from 11.5.10, some of the employees are not able to see the Employee Type supplier, but some employees are able to see all. I thought this maybe related to Role so I tried to add the roles that are missing from the employees that are able to see all supplier, but didn't help. Anyone know where to look at this? Thanks in advance.

    Hii ,
    Can you brief your problem in detail ? What do you mean by Not able to see Employee Type Supplier , is it do you mean in the Lovs ? or which form ??May be I can look into it .
    Thanks
    vennala

  • Not able to see PSA for the data souce 2lis_13_vdkon after enhaning

    Dear Experts,
    I have enhanced the extract structure of 2lis_13_vdkon in R/3 with 5 fields which are exist in transfer structure.
    I have replicated the data source in BI but unfortunately i have not deleted the data in the PSA.
    After replication when i try to activate the data source the system is giving Dump and im not able to see the PSA also.
    Please help me out.
    When i manage on the data source to c PSA, its giving error like this
    Invalid DataStore object name 2LIS_13_VDKON_BB: Reason: No valid entry in table RSTS
    The Dump when activating the data source is :
    Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
    Exception CX_SY_OPEN_SQL_DB
    Date and Time 03.06.2009 09:46:55
    How to correct the error
    Use an ABAP/4 Open SQL array insert only if you are sure that none of
    the records passed already exists in the database.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
    "CL_RSAR_PSA===================CP" or "CL_RSAR_PSA===================CM006"
    "_UPDATE_DIRECTORY_TABLES"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    Regards
    venu

    Hi Venu,
    The issue I think is the PSA was not deleted cleanly. If you try and activate the PSA you will get the dump again.
    ..Probably if you go through the ABAP dump you will notice it is pointing to the following code;-
       75 * Put the fields of PSA to database without check, otherwise error by
       76 * activation of table
       77
       78   IF p_psa_exists EQ rs_c_false OR
       79      i_new_version     EQ rs_c_true.
    >>>>>     INSERT rstsodsfield FROM TABLE l_t_odsfield.
       81   ELSE.
       82     DELETE FROM rstsodsfield
       83       WHERE odsname = l_s_odsfield-odsname
       84       AND  version = l_s_odsfield-version.
       85     MODIFY rstsodsfield FROM TABLE l_t_odsfield.
    Put a breakpoint in the code in line 78. and activate the DS..the program should stop in 78...change the value of variable rc_c_false so that line 82 gets executed. This will clean up the PSA entries in table rstsodsfield. Now activate the DS and delete the PSA entries in the PSA table.
    We faced the same issue and resolved it this way.
    Thanks
    -Saif

  • Sysadmin/All users are not able to see responsibilities after login in EBSR12

    I have followed the all notes from forums/metalinks. but no use.

    Hi Hussein,
    I came know the issue bcoz of profile change.
    on part of iSupport setup on web node, followed metalink DMZ configuration in R12.
    After I have changed below profile value, I am not able to see the responsibilities after login as sysadmin on webnode i.e new node B. but I can see responsibilities on node A.
    Update Node Trust Level
    To change the value of the Node Trust Level profile option value to External for a particular node, perform the following steps:
    1.       Login to Oracle E-Bsonapness Suite as sysadmin user sonapng the internal URL
    2.       Select the System Administrator Responsibility
    3.       Select Profile / System
    4.       From the 'Find system profile option Values' window, select the server and get the valie MINE8 into it.
    5.       Query for %NODE%TRUST%. You will see a profile option named 'Node Trust Level'. The value for this profile option at the site level will be Normal. Leave this setting unchanged.
    6.       Set the value of this profile option to External at the server level. The site level value should remain set to Normal
    I need to follow metalink note for configuration DMZ in EBS R12. but I cant see the responsibilities of sysadmin.
    fyi...I have cloned web external node by running adcfgclone.pl on node B by enabling web entry and web services only, remaining services are disabled. but as per metalink note, we should enable the Root Services also on node B. is it causing the issue after edit the profile on part of DMZ config in R12.
    please let me know how to fix this issue?
    I have deadline to finish it....

  • BI Publisher: not able to see the xml data after creating a data model

    I am learning BI publisher and trying to create a report data model
    I created a new data model from the report tab, use query builder, able to see the results. Then i save it and try to launch XML view from clicking View .
    I am getting unexpected exception, not able to see the XML view .
    in the server console i got servlet exception, here is one of the line
    com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303
    Edited by: joysaha123 on Mar 17, 2010 6:07 PM

    Hi karthik
    Thanks for your response
    Actually iam a beginner in java coding hence struggling to come up with the things
    I tried putting your code and onserver side i see it is returning 09:12:17,234 INFO [STDOUT] [root: null]
    actually the same program i wrote in java
    and the same method i was calling from the main
    and it is working fine and the xml document is getting displayed one important thing to be noted here is that the factory.newDocumentBuilder().parse(new File(filename));is returing XmlDocument
    and the printing takes place
    but the in same method public static Document parseXMLFile(String filename, boolean b) in servlet
    the line factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
    and this creating problem , had it returned XmlDocument
    i would have printed the elements one one
    but as it is returning deferredimpl
    iam unable to print the elements
    could you please tell me why factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
    in servlets but in plain java pogram it is returing XmlDocument
    Thanks
    Bhanu

  • I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

    I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
    Please suggest a solution or @Apple please get a software release which can remove this bug .

    We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

    I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

    Hi CMorenoOT,
    This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
    iTunes: How to set up an Apple ID within iTunes
    http://support.apple.com/kb/HT2731
    Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
    - Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
    - Once you've filled out all of the fields for your billing information, tap Next.
    For more information:
    Using an existing Apple ID with the iTunes Store and Mac App Store
    http://support.apple.com/kb/HT2589
    Thanks,
    Matt M.

  • Not able to see all the SAP tables from CR 2008

    Hi All,
    1)I am not able to see all the SAP database tables(DEV server) from Database expert menu in CR 2008. Only tables those start with alphabet letters upto A & B are visible. I checked the database connection>right click>options> found no filters as well.
    We are using the CR 2008 trial version with SAP ECC.
    2) When i am trying with Production Server of SAP ECC, I am not able to logon to the SAP from CR 2008. It is giving error message
    as : LOGON FAILED : User USER1 has no RFC AUTHORIZATION for function group SYST
    Please help me to resolve these. Thanks in advance.

    Thank you very much ingo.
    You helped me a lot.
    One more question, when I am trying for SAP database connections say for ex: 10.57.410.70, again and again some times the connection is getting saved in my connections with as new versions/variants like
    10.57.410.70_1 or so. How to overcome this.
    Thanks in advance ingo
    Badari

  • Not able to display users from Opneldap in Weblogic 8.1 Portal Admin

    Hi
              I had configured openldap for multiple authentication in weblogic 8.1. I am able to see users and groups from openldap in weblogic admin console but when i go to Portal Administration i am not able to see those users and groups. Also as per weblogic documentation it says that Authentication provider selection is shown automatically in Portal Admin. Also i am able to log to portal application from openldap users.
              I want set entitlements using Portal Admin for openldap users
              Can anyone suggest how to make it work.

    Hi
              I had configured openldap for multiple authentication in weblogic 8.1. I am able to see users and groups from openldap in weblogic admin console but when i go to Portal Administration i am not able to see those users and groups. Also as per weblogic documentation it says that Authentication provider selection is shown automatically in Portal Admin. Also i am able to log to portal application from openldap users.
              I want set entitlements using Portal Admin for openldap users
              Can anyone suggest how to make it work.

  • Merging  Patch,after that not able to see column in Presentation layer

    Hi,
    I am using rpd 11.1.1.5.0 and created patch done for modifications,after merging to original repository not able to see new derived columns in Presentation layer,able to see in BMM and Physical layer.
    Little bit urgent as client need to see reports.
    Thanks
    Karthik

    Thank you.... so much.
    Solution: clear preferences in home library ~/Library
    Preferences> com.apple.Safari.plist

Maybe you are looking for