AFVV Table fields update

Hi All,
I want to update fields of AFVV table like FSAVD, FSAVZ (Early start date & time), SSAVD,SSAVZ (Latest start date & time) ...Is there any Standard BAPI or FM available for this.
Pls help.
Regards,
Balaji.

Could you please share the solution?

Similar Messages

BDT Custom Table fields Update

Hi Friends ,
Using BDT, i created one tab in BP transaction and also i created two custom fields in Structure BUT000,
In PAI , I am using BUP_BUPA_BUT000_COLLECT to store screen values to the table BUT000
In PBO I am using BUP_BUPA_BUT000_GET to get database values .
i try to save values to the custom fields , But values are not stored in BUT000 table custom fields .
BUP_BUPA_BUT000_COLLECT
export parameter i_subname ( what value i have to give )
is there any other steps have i need to follow .
Pls give valuable suggetion
Regards
Krishnan R.

Hi ,
Using BDT, i created one tab in BP transaction and also i created two custom fields in Table KNA1,
Can anyone help how to update the Values from Screen to the database table (KNA1)

MARA table field STAWN (Comm./imp. code EU ) is not updating in MARC table

Dear Experts,
From MARA table field STAWN (Comm./imp. code EU ) is not updating in MARC table field STAWN (Comm./imp. code EU ) by MM02 Transaction
Is there any SAP standard functionality to over come above issue or needed ABAP coding for the same ????
Regards
Hanumant

Dear All,
Thanks for your reply
I tried to update the the field after adding plant and other detail actually that field will be gray mode (display) and cannot update
my question i want to update MARC_STAWN field (Forign trade import) for my existing all material , those material MARA_STAWN (basic data 3 ) is also blank but system is allowing me to update in MARA_STAWN (basic data 3) but system will not update to MARC_STAWN (Forign trade import) field.
What is the best method to Coppy all MARA Stawn fields to the MARC Stawn field.
Regards
Hanumant.

Adding a new field in BCONT table and updating it

Hi All,
Is there any BAPI/BADI which will allow to add a new field in standard BCONT table and update its value?
Your solution will be really helpful.
Thanks,
Nirupam

Hi Santosh,
This is required for UCES. We need to add a field in BCONT table (SE11/SE16), which will hold a flag value, i.e Y/N.
The value will be updated through a custom FM being used in UCES, and also based on the value there is a validation inside UCES.
This field need not be displayed inside any SAP screen.
thanks,
Nirupam
Edited by: Nirupam Deb on Jun 8, 2011 11:44 AM

Problem in Updating KNA1 table fields.

Hi,
   I have small issue , i need to block the customer while creating im using BADI(ADDRESS_UPDATE) to block the customer created.In the BADI im trying to update few fields of KNA1 table using UPDATE statement.
Like this...
    WA_KNA1-SPERR = 'X'.
    WA_KNA1-CASSD = 'X'.
    WA_KNA1-AUFSD = '01'.
    WA_KNA1-FAKSD = '01'.
    WA_KNA1-LIFSD = '01'.
    UPDATE KNA1 SET SPERR = WA_KNA1-SPERR
                                    AUFSD = WA_KNA1-AUFSD
                                     LIFSD = WA_KNA1-LIFSD
                                   FAKSD = WA_KNA1-FAKSD
                                    CASSD = WA_KNA1-CASSD
                WHERE KUNNR = W_KUNNR.
when this statement excutes it is updating
                                                                     1) SPERR
                                                                     2) AUFSD this two field remaining 3 fields it is not updating
Can anyone pls let me know the reason .
thanks in Adv.

see note 1469543
it is not possible to update kna1 directly, you must create a bim
oops sorry see that you're question is it inside a badi and not bapi
kind regards
arthur
Edited by: A. de Smidt on Jul 20, 2010 10:45 AM

Module pool - table control - update ztable

hello , i doing a module pool that will have few screens , now i have one screen with a table control that fetch the data from a ztable when screen is call the table control is showing the data and is in grey and no editable i add a pf-status for change that mode i can delete the row from the table control but i don't figure out how update to the ztable when i press save , i wan't too another button for add a new row ( and remain the already in grey ) for add new entrie in the table and update the ztable
pd: sorry for my bad english
this is my code:
TOP:
PROGRAM z_pp_lote_etiquetas MESSAGE-ID zz.
TABLES:zc2p_lote_etique,
       zc2p_lider_modul.
DATA: ok_code LIKE sy-ucomm.
DATA save_ok LIKE sy-ucomm.
* internal table
DATA: it_zc2p_lote_etique LIKE STANDARD TABLE OF zc2p_lote_etique.
DATA: it_zc2p_lider_modul TYPE STANDARD TABLE OF zc2p_lider_modul WITH HEADER LINE.
DATA: it_zc2p_lider_modul_del TYPE STANDARD TABLE OF zc2p_lider_modul WITH HEADER LINE.
**************Workarea
DATA: wa_c2p_lote_etique TYPE zc2p_lote_etique.
DATA: wa_c2p_lider_modul TYPE zc2p_lider_modul.
DATA: wa_c2p_lider_modul_del TYPE zc2p_lider_modul.
DATA: sel.
DATA: MARK.
DATA: init.
DATA: col TYPE scxtab_column.
DATA: lines TYPE i.
* Variable Declaration
DATA : flg, "Flag to set the change mode
ln TYPE i. "No. of records
* Table Control Declartion.
CONTROLS: zc2p_lider_crtl TYPE TABLEVIEW USING SCREEN '101'.
**PROCESS BEFORE OUTPUT INCLUDE **
*& Include           Z_PP_LOTE_ETIQUETAS_O01
*& Module set_status OUTPUT
* Setting the GUI status
MODULE status_0100 OUTPUT.
SET PF-STATUS 'Z_PP_LOT_ETIQ_MENU'.
SET TITLEBAR 'Z_PP_LOT_ETIQ'.
ENDMODULE. " set_status OUTPUT screen 100
* MODULE status_0101 OUTPUT
* Setting the GUI status
MODULE status_0101 OUTPUT.
SET PF-STATUS 'Z_PP_LOT_ETIQ_ME_101'.
SET TITLEBAR 'Z_PP_LOT_ETIQ'.
* Data retreving
if init is INITIAL.
select * from zc2p_lider_modul into CORRESPONDING FIELDS OF TABLE it_zc2p_lider_modul.
    DESCRIBE TABLE it_zc2p_lider_modul LINES ln.
    zc2p_lider_crtl-lines = ln + 10.
    init = 'X'.
endif.
ENDMODULE.                    "status_0101 OUTPUT
module change_sdyn_conn output.
* you can change the content of current table control line via
* sdyn_conn
READ TABLE it_zc2p_lider_modul INTO zc2p_lider_modul INDEX zc2p_lider_crtl-current_line.
endmodule.                             " FILL_TABLE_CONTROL OUTPUT
MODULE set_screen_fields OUTPUT.
LOOP AT SCREEN.
IF flg IS INITIAL.
screen-input = 0.
ELSE.
screen-input = 1.
ENDIF.
*ENDIF.
* Modifying the screen after making changes
MODIFY SCREEN.
ENDLOOP.
ENDMODULE. " set_screen_fields OUTPUT
PROCESS AFTER INPUT INCLUDE.
* MODULE USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'LIDM'.
      CALL SCREEN 101.
    WHEN 'CANC'.
      LEAVE PROGRAM.
    WHEN 'BACK'.
      LEAVE PROGRAM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                    "USER_COMMAND_0100 INPUT
* MODULE USER_COMMAND_0101 INPUT
MODULE user_command_0101 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'SORT'.
      DATA: fldname(100),help(100).
      READ TABLE zc2p_lider_crtl-cols INTO col WITH KEY selected = 'X'.
      SPLIT col-screen-name AT '-' INTO help fldname.
      SORT it_zc2p_lider_modul BY (fldname).
    WHEN 'CHANGE'.
* Setting the flag to make the table control in editable mode[excluding
* primary key].
      flg = 'Y'.
    WHEN 'BACK'.
      CALL SCREEN 100.
      LEAVE SCREEN.
    WHEN 'CANCEL'.
      LEAVE PROGRAM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN 'SAVE'.
      MODIFY zc2p_lider_modul FROM it_zc2p_lider_modul.
      COMMIT WORK.
ENDCASE.
ENDMODULE.                    "USER_COMMAND_0101 INPUT
* MODULE read_table_control INPUT
MODULE read_table_control INPUT.
* Check input values
IF mark = 'X' AND save_ok = 'DELETE'.
    DELETE TABLE it_zc2p_lider_modul FROM zc2p_lider_modul.
    DESCRIBE TABLE it_zc2p_lider_modul LINES zc2p_lider_crtl-lines.
ENDIF.
ENDMODULE.                             " READ_TABLE_CONTROL INPUT
Screen Flow Logic 100
PROCESS BEFORE OUTPUT.
MODULE status_0100.
PROCESS AFTER INPUT.
MODULE user_command_0100.
Screen Flow Logic 101.
PROCESS BEFORE OUTPUT.
MODULE status_0101.
LOOP AT it_zc2p_lider_modul INTO zc2p_lider_modul WITH CONTROL
zc2p_lider_crtl.
* Dynamic screen modifications
    MODULE set_screen_fields.
    MODULE change_sdyn_conn.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_0101.
LOOP AT it_zc2p_lider_modul.
    MODULE read_table_control.
ENDLOOP.
i hope somebody can help for what i missing here thanks

>
Sanjeev Kumar wrote:
> Hello Edgar,
>
> Problem seems to be there in the flow logic of 101
>
>
> PROCESS BEFORE OUTPUT.
>   MODULE status_0101.
>   LOOP AT it_zc2p_lider_modul INTO zc2p_lider_modul WITH CONTROL
> zc2p_lider_crtl. " no need to have 'INTO zc2p_lider_modul' above
> * Dynamic screen modifications
>     MODULE set_screen_fields.
>     MODULE change_sdyn_conn.
>   ENDLOOP.
> *
> PROCESS AFTER INPUT.
>   MODULE user_command_0101. "this should be shifted after the following LOOP...ENDLOOP.
>
>   LOOP AT it_zc2p_lider_modul. "need to have 'WITH CONTROL zc2p_lider_crtl' here
>     MODULE read_table_control.
>   ENDLOOP.
>
>
>
> With MODULE user_command_0101 call before the LOOP calls the MODIFY statement (under case save_ok 'SAVE') first and Z-table is updated with the old values as the changes are transferred from screen into the internal table it_zc2p_lider_modul in the LOOP...ENDLOOP later.
>
> Try these changes and I hope it will work.
>
> Thanks
> Sanjeev
i do the firts advice but the second one i get syntax error :
my code :
PROCESS AFTER INPUT.
LOOP at it_zc2p_lider_modul WITH CONTROL zc2p_lider_crtl.
    MODULE read_table_control.
ENDLOOP.
   MODULE user_command_0101.
error :
In the event PROCESS AFTER INPUT, no additions are allowed with "LOOP
AT".

Table field and structure field

Hi ,
I am working on an user exit.
I have to update a field on the transaction screen DFBATCH-MHD_IO (DFBATCH is a struture).
Now the same field is defined in table MARA-VFDAT (MARA is a table).
Now in the user exit function module I have written a code which will update the table field MARA-VFDAT.
So will the structure field also gets updated automatically since that structure field is same as the table field (only name is different) or I have to explicitly equate table field to structure field.
Raghu.

How do you know that DFBATCH-MHD_IO is tied to MARA-VFDAT. Is there a line of code in the transaction like this.
MARA-VFDAT = DFBATCH-MHD_IO.
or
DFBATCH-MHD_IO = MARA-VFDAT.
If you are updating MARA-VFDAT from your userexit, and the existing code in the transaction is filling the DFBATCH-MHD_IO from MARA-VFDAT, then no you shouldn't need to fill it.
Regards,
Rich Heilman

Table fields used for basic key figures in report writer/report painter

Does anyone know how I can find which table field is actually being used for SAP defined basic key figures in report writer report? For example, HSL is a basic key figure for income statement, library 0F1, report 0F-GUVV. It only shows data is coming from table GLFUNCT. How does the report writer program knows which fields to select? What is the logic behind the basic key figures?
Any advice is appreciated!!
Minami

I have now resolved this issue.
I had to manually update TablesT804B and T804F.
I've added entries to T804A in the past without the need to update T804B or T804F manually so it appears that the way these tables work together has changed following an upgrade or application of support packs.
Regards
Mel

When payment is made to Vendor for an open line item. Which table's updated

Hi,
When an invoice has been posted for a GR. The invoice will be pending for payment. And when the payment is made to the vendor .Which table is updated, as i need to create a functional spec for triggering a message automatically to initate vendor payment if it is due for a month. I want the table name?
Regards
Chandan

Hi,
The payment document posted is again a accounting document, the table is BKPF - Header and BSEG - Item.
In order to know if a LIV accounting document is cleared i.e payment made could be checked in the field
BSEG-REBZG. this field would carry the payment document number, which is again a accounting document ( table bkpf-bseg).
hope this helps.
Harish

Table Field of Opening Balance & Closing Balance

Hi,
I want the table field of Opening Balance & Closing Balance for G/L Account Balance (ref. t. code FS10N).....
From where i can get these field...
Thanks

Hi,
Activate SQL trace (ST05), and run the transaction to create a new entry or change the value of an existing, then deactivate the trace.
we can see the tables that updating the transaction.
Hope this will help you....
Regards,
Pavan

How to insert a file in a table field

hi there
i want to insert file into table field
i am using plain JSP and oracle 9i is my backend
what i would required to do the file may be of any format
most probably PDF,WORD, or an Image
which datatype is preferable for field
regards
sweety

Hi,
data type should be BLOB and read the below thread for update
[JAVA+Oracle+BLOB|http://forum.java.sun.com/thread.jspa?threadID=5242835&messageID=10000161]
Regards,
Ram.

Validity Table not updating for 0IC_C03 while updating data

Hi,
1.Validity table not updating for 0IC_C03 while updating data in my BW 7.4 With HANA data base?
Key fields : 0Plant
0Calday
if you run this programe after loading data - RSDG_CUBE_VALT_MODIFY it is updating.
2. I am not getting no marker update option in non-cumulative Info cube 0ic_c03 manage tab or in DTP tabs check as per 7.4 modifications?
and 2LIS_03_BX in DTP I am getting below this option only
Can you please give me solution for this issues.
Regards
Umashankar

Hi Uma,
Please go through the below link which might be helpful.
Not able to Edit Validity Table : RSDV
Marker Update Option is available under Collapse tab of Info cube.
Thanks,
Karan

JDBC Sender - ORA-08177 on UPDATE, but Table is updated - no message

Hi,
I have a problem with JDBC Adapter:
I use a JDBC Sender adapter, polling every minute on an Oracle DB.
I use isolation level "serializable".
No what happens sometimes is, that the update statement fails because of "ORA-08177: can't serialize access for this transaction", so no message is forwarded to the IS. Curiously, the entries in the table are updated, so the JDBC Driver seems to update the data anyways.
Has anybody experience with similar problems? This is a really hard issue because no messages are transmitted althought the condition field in the table is updated and everything seems normal. Also the status light of the communication channel will be green again after a while, so it is really hard to trace.
System:
XI 3.0 SP20
ORACLE 8.1.7.4
I use the following statements with a rownum limit:
select ... from TABLE where CONDITION = '_to_send' AND rownum <= 20 order by NACHRICHT_ID
update TABLE set CONDITION = '_sending' where PRIMARY_KEY in (select PRIMARY_KEY from TABLE where CONDITION = '_to_send' and rownum <= 20)
(just to complete the picture...)
This message goes to BPM, where it is split into single messages. These messages are processed separately, and after an successfull processing an update statement is sent back to the DB:
update TABLE set CONDITION = '_processed' where PRIMARY_KEY = <PK of processed message>
So the condition "_sending" is an interim status for the messages sent to BPM, but not finally processed.
What happens is, that the receiver of the messages complained about missing messages. I could find some messages in the interim status, but no message has ever been sent.
I appreciate any help.
Thank you very much.

Sainath Chutke wrote:
As you have used the Isolation level as serialiable whenever the transaction fails the data gets updated because once the transaction reaches the end of the adapter level processing " the update statemnets gets executed " Irrespective of whether the transaction is sucessful or failure."
Curiously, the select statement does not throw the error, the update statement does. But even though the update statement does not work (ORA-08177), it works (rows in DB are updated). That is what causes headache to me.
Try to change the Isolation level and get the message id generated using an UDF.´
Sorry, but I do not completely understand what you suggest here.
My needs are:
- select rows that fulfill condition (limit to a max number per poll interval)
- update the selected rows to not fulfill the condition any more (to not double sent data)
- the update statement must update exactly the same rows that have been selected before (transaction)
or in other words:
I need to make sure the data is sent only once and exactly once.
If your idea can satisfy these needs, I kindly ask you to explain it more detailed.
Thank you very much.

Insert one table and update another???

Hello,
I was wondering if it is possible to insert a record in one table and update another another record in a different table.
I have a form on my company's intranet that allows employees to add comments (ADDT Insert transaction) about new products we are going to bring to the market. At the same time, I would like to count the numbers of comments on a particular product and update that number for each product to see which product is getting the most reviews.
Right now the products are on the homepage with the title and inserted date. From there, the employees click on the product get the info and make comments about it. The problem for me is that I would like to see the comment counts for each product on the home page, which means I would have to update the product table with the count.
Sorry, I am using PHP as the technology.
When I used to do it in ASP, I would insert the comment using the POST from the form, but add another hidden field with the count in it and I would use the "Command" Server behavior to retrieve the number and update the other table field.
I noticed that dreamweaver removed the "Command" server behavior when using PHP.
All help is greatly appreciated
Charles.

Hi Charles,
you can generally execute queries on a different table using Custom Triggers, and in regards to your "update the product table with the count" scenario the ADDT help file has a helpful pointer in the chapter "Custom transactions and triggers : Save additional information on login" -- in here you´ll find a sample "incremental counter" query which should be easy to adapt.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Invoice List Cancellation Status table field

Hi,
I need to know, which table field is updated when we cancel an invoice List using VF26. If there is cancellation once the VBRK-SFAKN is updated with the cancelled Invoice List Number. But in case there are multiple cancellations, the SFAKN field still contains the first cancelled Invoice list #. There is no status field in VBRL to indicate whether the status of the invoice list is cancelled or active.
How to trace whether the subsequent invoice lists are cancelled or not?
Thanks,
Amit

Amit,
I don't find any field being updated on the original Invoice list while u are cancelling it.
So unfortunately you can't find from its VBRK entries that it was cancelled.
This is my understanding.... Let me know if you discover any thing new.
Coming to how we live up with it......
Before sending the invoice list to the customers we will check whether any entry exist in VBRK table with the same number in SFAKN(Cancelled billing doc #).. So if any entry exist in VBRK, that means this document was cancelled, so ignore it from the send list.
Let me know if you would like to know anymore details....
Thanks,
Aj.

AFVV Table fields update

Similar Messages

Maybe you are looking for