AgentryGUI / AgentryCmd in SMP 2.3 not working?
Hi all,
when trying to connect to an Agentry Server 6.1.x with the AgentryGUI.exe or AgentryCmd.exe, all I get is the following error message:
Error reading result from server
Zero bytes handled
Success
...unable to connect to "sapdev:50236" server with pipe file. Server reports "Success"
Unable to connect!
Zero bytes handled
Success
Is there some configuration I have to do to use those tools? Or are they not supported anymore (and if so, why are they still included in the release)?
Regards, Daniel
Daniel,
This is a known issue that the Engineering team is working on. I believe the fix is scheduled for the next service pack release but could be wrong.
When the Agentry server starts it generates a file called ServerPipes.lst. This file contains the host/port references that the admin consoles (AgetnryGUI and AgentryCmd) use to know how to connect to the server.
The one thing I can suggest that I have sometimes (but not always) have had success with is editing the ServerPipes.lst file to change the hostname to be either the fully qualified hostname or IP address of the server, saving the file and attempting to connect again from the admin consoles.
Worth a try until the fix is released. It is also worth noting that yes the AgentryGUI and AgentryCmd are gone with the release of SMP 3.0 as the Management Cockpit replaces them.
--Bill
Similar Messages
-
MRS Push with SMP 3.0 and Service Manager 4.2 is not working
Hi All,
I am working on SMP 3.0 SP 06 Service Manager 4.2 application .
I have configured MRS Push which is not working . Service Order push is working fine.
If anyone has configured MRS push with any one the Syclo mobile products ,Please share the steps.
Thanks in advance.
Thanks
NehaNeha,
Can you refer this OSS note: 2014454 for MRS setup.
Thanks,
Manju -
Minetest translation does not work on my machine.
Hey there.
After trying my luck in the official Minetest forums a week ago and got nothing more than the initial “try this-and-that” thing as response in the German discussion section and no reply at all in the regular discussion section I decided to ask on Reddit on last Saturday afternoon, too. On Reddit my question only got 3 upvotes and no comments.
Since no-one seems to know what’s going on I decided to post my question here, too.
It sems like the translation feature in Minetest does not work on my machine for unknown reason.
The language files are there and according to it’s oputput and the PKGBUILD Minetest was compiled with gettext support. LANG and LC_MESSAGES are properly set (I even tried LC_ALL). Localization works properly in all other applications that support localization.
Here’s some relevant system information.
$ uname -rms
Linux 3.16.1-1-ARCH x86_64
$ minetest --version
Minetest 0.4.10
Using Irrlicht 1.8.1
Build info: VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
$ pacman -Ql minetest | grep locale/de
minetest /usr/share/locale/de/
minetest /usr/share/locale/de/LC_MESSAGES/
minetest /usr/share/locale/de/LC_MESSAGES/minetest.mo
$ locale
LANG=de_DE.utf8
LC_CTYPE="de_DE.utf8"
LC_NUMERIC="de_DE.utf8"
LC_TIME="de_DE.utf8"
LC_COLLATE="de_DE.utf8"
LC_MONETARY="de_DE.utf8"
LC_MESSAGES="de_DE.utf8"
LC_PAPER="de_DE.utf8"
LC_NAME="de_DE.utf8"
LC_ADDRESS="de_DE.utf8"
LC_TELEPHONE="de_DE.utf8"
LC_MEASUREMENT="de_DE.utf8"
LC_IDENTIFICATION="de_DE.utf8"
LC_ALL=de_DE.utf8
$ cat /etc/locale.gen
de_DE.UTF-8 UTF-8
en_DK.UTF-8 UTF-8
en_US.UTF-8 UTF-8
According to the discussion in the German discussion section in the Minetest forums I tried to set language = DE (and variants like de_DE with or without .utf8 in all possible variants) in minetest.conf but it didn’t change anything. Also: Here’s the output of running Minetest with --verbose parameter.
16:47:01: INFO[main]: Using system-wide paths (NOT RUN_IN_PLACE)
16:47:01: INFO[main]: path_share = /usr/share/minetest
16:47:01: INFO[main]: path_user = /home/dirk/.minetest
16:47:01: INFO[main]: minetest with SER_FMT_VER_HIGHEST_READ=26, VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
16:47:01: INFO[main]: logfile = /home/dirk/.minetest/debug.txt
16:47:01: VERBOSE[main]: httpfetch_init: parallel_limit=8
16:47:01: INFO[main]: Message locale is now set to: LC_CTYPE=de_DE.utf8;LC_NUMERIC=C;LC_TIME=en_DK.utf8;LC_COLLATE=de_DE.utf8;LC_MONETARY=de_DE.utf8;LC_MESSAGES=de_DE.utf8;LC_PAPER=de_DE.utf8;LC_NAME=de_DE.utf8;LC_ADDRESS=de_DE.utf8;LC_TELEPHONE=de_DE.utf8;LC_MEASUREMENT=de_DE.utf8;LC_IDENTIFICATION=de_DE.utf8
Irrlicht log: Irrlicht Engine version 1.8.1
Irrlicht log: Linux 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
Irrlicht log: Using renderer: OpenGL 3.3.0
Irrlicht log: GeForce 9600 GT/PCIe/SSE2: NVIDIA Corporation
Irrlicht log: OpenGL driver version is 1.2 or better.
Irrlicht log: GLSL version: 3.3
16:47:01: INFO[main]: text_height=22
16:47:01: INFO[main]: Searching worlds...
16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:01: INFO[main]: Spielwelt
16:47:01: INFO[main]: 1 found.
16:47:01: INFO[main]: Waiting for other menus
16:47:01: INFO[main]: Waited for other menus
16:47:01: INFO[main]: Audio: Initializing...
16:47:01: INFO[main]: Audio: Vorbis extension NOT present
16:47:01: INFO[main]: Audio: Initialized: OpenAL 1.1 ALSOFT 1.16.0, using OpenAL Soft
16:47:01: INFO[main]: GUIEngine: Initializing Lua
16:47:01: VERBOSE[AsyncWorkerThread_0]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_0]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_1]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_1]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_2]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[main]: SCRIPTAPI: Initialized main menu modules
16:47:01: VERBOSE[main]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_2]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_3]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_3]: Initializing Asynchronous environment
16:47:01: INFO[main]: Searching worlds...
16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:01: INFO[main]: Spielwelt
16:47:01: INFO[main]: 1 found.
16:47:01: VERBOSE[main]: OpenALSoundManager::maintain(): 0 playing sounds, 0 sound names loaded
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.0.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.1.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.2.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.3.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.4.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.5.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.6.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.7.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.8.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.9.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.0.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.1.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.2.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.3.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.4.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.5.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.6.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.7.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.8.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.9.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.ogg for decoding
16:47:01: INFO[main]: OpenALSoundManager: "main_menu" not found.
16:47:05: INFO[main]: Audio: Deinitializing...
16:47:05: INFO[main]: Audio: Deinitialized.
16:47:05: INFO[main]: GUIEngine: Deinitializing scripting
16:47:05: INFO[main]: Searching worlds...
16:47:05: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:05: INFO[main]: Spielwelt
16:47:05: INFO[main]: 1 found.
16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
16:47:05: VERBOSE[main]: httpfetch_cleanup: cleaning up
… or on nopaste.info for better readability.
Since it seems to work for everyone else (otherwise there might be more replies to my quesions in several places, I guess *g*) I’m pretty sure that’s a local problem on my machine. But since gettext properly works on my machine in all and every application that use it I have no clue at all where to start debugging.
Hints are highly appreciated Thanks in advance!
Kind regards,
DirkHi there...
It gives me a URL that begins with http:// Safari does something strange, ie. flashes the page, and then complains about not recognizing photo://
It seems that it has not figured out that it needs to open iPhoto 6.
Regardless, the provided link is not viewable when cutting and pasting into safari, neither.
I am using the latest and greatest 10.4.4, Safari is 2.0.3. -
NVIDIA driver not working on HP envy dv7
Hi,
i trying to install nvidia official driver to my HP envy dv7 laptop.
Two wasted nights without success.
I trying newest version from nvidia.com and from pacman.
Result is same in both cases - black screen, high cpu temperatures, no video output.
Pasted logs are from pacman version.
Thank you for help !
uname -a :
$ uname -a
Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
lspci | grep VGA
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
modinfo nvidia
$modinfo nvidia
filename: /lib/modules/3.13.5-1-ARCH/extramodules/nvidia.ko.gz
alias: char-major-195-*
version: 331.38
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm,i2c-core
vermagic: 3.13.0-1-ARCH SMP preempt mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_RMEdgeIntrCheck:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp
pacman -Qi nvidia
$pacman -Qi nvidia
Name : nvidia
Version : 331.38-3
Description : NVIDIA drivers for linux
Architecture : x86_64
URL : http://www.nvidia.com/
Licenses : custom
Groups : None
Provides : None
Depends On : linux>=3.13 linux<3.14 nvidia-libgl nvidia-utils=331.38
Optional Deps : None
Required By : None
Optional For : bumblebee
Conflicts With : nvidia-96xx nvidia-173xx
Replaces : None
Installed Size : 4642.00 KiB
Packager : Thomas Bächler <[email protected]>
Build Date : Sun 26 Jan 2014 10:22:40 AM UTC
Install Date : Wed 26 Feb 2014 05:45:32 PM UTC
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
nvidia-xconfig --query-gpu-info
$nvidia-xconfig --query-gpu-info
Number of GPUs: 1
GPU #0:
Name : GeForce GT 630M
UUID : GPU-172f9afb-954f-a30c-b9e1-016f89943947
PCI BusID : PCI:1:0:0
Number of Display Devices: 1
Display Device 0 (CRT-0):
No EDID information available.
xorg.0.log
[ 2028.379]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 2028.394] X Protocol Version 11, Revision 0
[ 2028.399] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 2028.407] Current Operating System: Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64
[ 2028.407] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
[ 2028.423] Build Date: 09 January 2014 08:47:24AM
[ 2028.431]
[ 2028.439] Current version of pixman: 0.32.4
[ 2028.456] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2028.456] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2028.498] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 26 18:29:34 2014
[ 2028.510] (==) Using config file: "/etc/X11/xorg.conf"
[ 2028.522] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2028.535] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2028.548] (==) ServerLayout "Layout0"
[ 2028.561] (**) |-->Screen "Screen0" (0)
[ 2028.574] (**) | |-->Monitor "Monitor0"
[ 2028.587] (**) | |-->Device "Device0"
[ 2028.601] (**) |-->Input Device "Keyboard0"
[ 2028.615] (**) |-->Input Device "Mouse0"
[ 2028.629] (==) Automatically adding devices
[ 2028.643] (==) Automatically enabling devices
[ 2028.658] (==) Automatically adding GPU devices
[ 2028.673] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2028.688] Entry deleted from font path.
[ 2028.704] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2028.721] Entry deleted from font path.
[ 2028.738] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2028.756] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2028.774] Entry deleted from font path.
[ 2028.792] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2028.869] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 2028.889] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2028.910] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2028.931] (WW) Disabling Keyboard0
[ 2028.952] (WW) Disabling Mouse0
[ 2028.974] (II) Loader magic: 0x804c80
[ 2028.995] (II) Module ABI versions:
[ 2029.017] X.Org ANSI C Emulation: 0.4
[ 2029.039] X.Org Video Driver: 15.0
[ 2029.062] X.Org XInput driver : 20.0
[ 2029.084] X.Org Server Extension : 8.0
[ 2029.107] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2029.109] (--) PCI:*(0:0:2:0) 8086:0166:103c:181d rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[ 2029.134] (--) PCI: (0:1:0:0) 10de:0de9:103c:181d rev 161, Mem @ 0xd2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 2029.186] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2029.213] Initializing built-in extension Generic Event Extension
[ 2029.240] Initializing built-in extension SHAPE
[ 2029.267] Initializing built-in extension MIT-SHM
[ 2029.295] Initializing built-in extension XInputExtension
[ 2029.322] Initializing built-in extension XTEST
[ 2029.349] Initializing built-in extension BIG-REQUESTS
[ 2029.377] Initializing built-in extension SYNC
[ 2029.404] Initializing built-in extension XKEYBOARD
[ 2029.432] Initializing built-in extension XC-MISC
[ 2029.459] Initializing built-in extension SECURITY
[ 2029.486] Initializing built-in extension XINERAMA
[ 2029.512] Initializing built-in extension XFIXES
[ 2029.538] Initializing built-in extension RENDER
[ 2029.564] Initializing built-in extension RANDR
[ 2029.589] Initializing built-in extension COMPOSITE
[ 2029.615] Initializing built-in extension DAMAGE
[ 2029.640] Initializing built-in extension MIT-SCREEN-SAVER
[ 2029.665] Initializing built-in extension DOUBLE-BUFFER
[ 2029.688] Initializing built-in extension RECORD
[ 2029.711] Initializing built-in extension DPMS
[ 2029.734] Initializing built-in extension Present
[ 2029.756] Initializing built-in extension DRI3
[ 2029.778] Initializing built-in extension X-Resource
[ 2029.800] Initializing built-in extension XVideo
[ 2029.821] Initializing built-in extension XVideo-MotionCompensation
[ 2029.842] Initializing built-in extension XFree86-VidModeExtension
[ 2029.863] Initializing built-in extension XFree86-DGA
[ 2029.883] Initializing built-in extension XFree86-DRI
[ 2029.903] Initializing built-in extension DRI2
[ 2029.923] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 2029.923] (II) LoadModule: "glx"
[ 2029.964] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2029.993] (II) Module glx: vendor="NVIDIA Corporation"
[ 2029.993] compiled for 4.0.2, module version = 1.0.0
[ 2030.034] Module class: X.Org Server Extension
[ 2030.055] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
[ 2030.076] Loading extension GLX
[ 2030.077] (II) LoadModule: "nvidia"
[ 2030.120] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2030.142] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2030.142] compiled for 4.0.2, module version = 1.0.0
[ 2030.185] Module class: X.Org Video Driver
[ 2030.207] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
[ 2030.229] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2030.251] (II) NVIDIA X compatibility module for ABI 15.0 built from xorg-server-1.14.99.901
[ 2030.273] (II) X log verbosity: 5
[ 2030.315] (--) using VT number 1
[ 2030.462] (II) Loading sub module "fb"
[ 2030.462] (II) LoadModule: "fb"
[ 2030.462] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2030.462] (II) Module fb: vendor="X.Org Foundation"
[ 2030.462] compiled for 1.15.0, module version = 1.0.0
[ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2030.462] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 2030.462] (II) Loading sub module "wfb"
[ 2030.462] (II) LoadModule: "wfb"
[ 2030.462] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2030.462] (II) Module wfb: vendor="X.Org Foundation"
[ 2030.462] compiled for 1.15.0, module version = 1.0.0
[ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2030.462] (II) Loading sub module "ramdac"
[ 2030.462] (II) LoadModule: "ramdac"
[ 2030.462] (II) Module "ramdac" already built-in
[ 2030.462] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 2030.462] (==) NVIDIA(0): RGB weight 888
[ 2030.462] (==) NVIDIA(0): Default visual is TrueColor
[ 2030.463] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2030.463] (==) NVIDIA(0): Using HW cursor
[ 2030.463] (==) NVIDIA(0): Video key set to default value of 0x101fe
[ 2030.463] (==) NVIDIA(0): Not mapping the primary surface by default.
[ 2030.463] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
[ 2030.463] (**) NVIDIA(0): Enabling 2D acceleration
[ 2030.463] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
[ 2030.588] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
[ 2030.588] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 2030.589] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
[ 2030.589] (II) NVIDIA(0): GPU UUID: GPU-172f9afb-954f-a30c-b9e1-016f89943947
[ 2030.589] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 2030.589] (II) NVIDIA(0): Board ID: 0xce4e
[ 2030.589] (II) NVIDIA(0): Chip SKU: 770
[ 2030.589] (II) NVIDIA(0): Chip SKU Mod: 1
[ 2030.589] (II) NVIDIA(0): Project: 1303
[ 2030.589] (II) NVIDIA(0): Project SKU: 0000
[ 2030.589] (II) NVIDIA(0): GPU RAM Type: DDR3
[ 2030.589] (--) NVIDIA(0): VideoBIOS: 70.08.b9.00.0b
[ 2030.589] (--) NVIDIA(0): Found 2 heads on board
[ 2030.589] (II) NVIDIA(0): Supported display device(s): CRT-0
[ 2030.589] (II) NVIDIA(0): Bus detected as PCI Express
[ 2030.589] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 2030.589] (II) NVIDIA(0): SPS : 1
[ 2030.589] (II) NVIDIA(0): User configuration of GPU PowerMizer is supported
[ 2030.589] (II) NVIDIA(0):
[ 2030.591] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
[ 2030.591] (--) NVIDIA(0): CRT-0 (boot, connected)
[ 2030.591] (--) NVIDIA(0): CRT-0 Name Aliases:
[ 2030.591] (--) NVIDIA(0): CRT
[ 2030.591] (--) NVIDIA(0): CRT-0
[ 2030.591] (--) NVIDIA(0): DPY-0
[ 2030.591] (--) NVIDIA(0): VGA-0
[ 2030.591] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 2030.591] (--) NVIDIA(0):
[ 2030.591] (--) NVIDIA(0): --- EDID for CRT-0 ---
[ 2030.591] (--) NVIDIA(0):
[ 2030.591] (--) NVIDIA(0): No EDID Available.
[ 2030.591] (--) NVIDIA(0):
[ 2030.591] (--) NVIDIA(0): --- End of EDID for CRT-0 ---
[ 2030.591] (--) NVIDIA(0):
[ 2030.591] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2030.591] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 2030.591] (**) NVIDIA(0): all display devices.)
[ 2030.591] (II) NVIDIA(0): Frequency information for CRT-0:
[ 2030.591] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
[ 2030.591] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
[ 2030.591] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
[ 2030.591] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
[ 2030.593] (II) NVIDIA(GPU-0):
[ 2030.593] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
[ 2030.593] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
[ 2030.593] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
[ 2030.593] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
[ 2030.593] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
[ 2030.593] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
[ 2030.593] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
[ 2030.593] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
[ 2030.593] (II) NVIDIA(GPU-0):
[ 2030.593] (II) NVIDIA(0): Display device(s) assigned to X screen 0:
[ 2030.593] (II) NVIDIA(0): CRT-0
[ 2030.593] (==) NVIDIA(0):
[ 2030.593] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 2030.593] (==) NVIDIA(0): will be used as the requested mode.
[ 2030.593] (==) NVIDIA(0):
[ 2030.593] (II) NVIDIA(0): Requested modes:
[ 2030.593] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 2030.593] (II) NVIDIA(0): Validated MetaModes:
[ 2030.593] (II) NVIDIA(0): MetaMode "CRT-0:nvidia-auto-select":
[ 2030.593] (II) NVIDIA(0): Size: 1024 x 768
[ 2030.593] (II) NVIDIA(0): CRT-0: "nvidia-auto-select"
[ 2030.593] (II) NVIDIA(0): Size : 1024 x 768
[ 2030.593] (II) NVIDIA(0): Offset : +0 +0
[ 2030.593] (II) NVIDIA(0): Panning
[ 2030.593] (II) NVIDIA(0): Domain : 1024 x 768
[ 2030.593] (II) NVIDIA(0): Tracking Area: 1024 x 768 +0 +0
[ 2030.593] (II) NVIDIA(0): Border : 0,0,0,0
[ 2030.593] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_60"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_56"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 640x480"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 512x384"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 400x300"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 320x240"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: nvidia-auto-select { ViewPortIn = 1024 x 576, ViewPortOut = 1024 x 576 + 0 + 96 }"
[ 2030.596] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 2030.596] (WW) NVIDIA(0): from CRT-0's EDID.
[ 2030.596] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 2030.596] (--) Depth 24 pixmap format is 32 bpp
[ 2030.597] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 2030.597] (II) NVIDIA: access.
[ 2030.599] (II) NVIDIA(0): kernel module enabled successfully
[ 2030.599] (II) NVIDIA(0): GPU initialized
[ 2030.599] (II) NVIDIA(0): ACPI: AC state file path: /sys/class/power_supply/ADP1/online
[ 2030.599] (II) NVIDIA(0): ACPI: the system is running on battery power
[ 2030.599] (II) NVIDIA(0): ACPI: dock file path: /sys/devices/platform//dock.0/docked
[ 2030.599] (II) NVIDIA(0): ACPI: the system is undocked
[ 2030.599] (II) NVIDIA(0): Registered for mobile display change hotkey events.
[ 2030.602] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 2030.619] (II) NVIDIA(0): First mode initialized
[ 2030.624] (==) NVIDIA(0): Using 8388608 bytes for software rendering cache
[ 2030.629] (II) NVIDIA(0): Using built-in logo image.
[ 2030.629] (II) NVIDIA(0): Logo is 744x537 with depth 24.
[ 2030.641] Loading extension NV-GLX
[ 2030.689] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 2030.689] (II) NVIDIA(0): Visuals set up
[ 2030.689] (II) NVIDIA(0): Pixmap depths set up
[ 2030.690] (II) NVIDIA(0): GLX visuals set up
[ 2030.690] (II) NVIDIA(0): Framebuffer set up
[ 2030.690] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2030.690] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 2030.690] (==) NVIDIA(0): Backing store enabled
[ 2030.690] (==) NVIDIA(0): Silken mouse enabled
[ 2030.690] (II) NVIDIA(0): Default colormap initialized.
[ 2030.690] (II) NVIDIA(0): Palette loaded
[ 2030.690] (**) NVIDIA(0): DPMS enabled
[ 2030.690] Loading extension NV-CONTROL
[ 2030.690] Loading extension XINERAMA
[ 2030.690] (II) NVIDIA(0): Loading NVIDIA Xinerama information
[ 2030.690] (II) Loading sub module "dri2"
[ 2030.690] (II) LoadModule: "dri2"
[ 2030.690] (II) Module "dri2" already built-in
[ 2030.690] (II) NVIDIA(0): [DRI2] Setup complete
[ 2030.690] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2030.690] (II) NVIDIA(0): Screen initialization complete
[ 2030.690] (--) RandR disabled
[ 2030.695] (II) Initializing extension GLX
[ 2030.726] (II) XKB: Reusing cached keymap
[ 2030.728] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2030.728] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2030.728] (II) LoadModule: "evdev"
[ 2030.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2030.728] (II) Module evdev: vendor="X.Org Foundation"
[ 2030.728] compiled for 1.15.0, module version = 2.8.2
[ 2030.728] Module class: X.Org XInput Driver
[ 2030.728] ABI class: X.Org XInput driver, version 20.0
[ 2030.728] (II) Using input driver 'evdev' for 'Power Button'
[ 2030.728] Option "XkbRules" "evdev"
[ 2030.728] Option "XkbModel" "pc104"
[ 2030.728] Option "XkbLayout" "us"
[ 2030.728] Option "_source" "server/udev"
[ 2030.728] Option "name" "Power Button"
[ 2030.728] Option "path" "/dev/input/event2"
[ 2030.728] Option "device" "/dev/input/event2"
[ 2030.728] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[ 2030.728] Option "driver" "evdev"
[ 2030.728] (**) Power Button: always reports core events
[ 2030.728] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2030.729] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2030.729] (--) evdev: Power Button: Found keys
[ 2030.729] (II) evdev: Power Button: Configuring as keyboard
[ 2030.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[ 2030.729] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2030.729] (**) Option "xkb_rules" "evdev"
[ 2030.729] (**) Option "xkb_model" "pc104"
[ 2030.729] (**) Option "xkb_layout" "us"
[ 2030.748] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2030.748] (II) No input driver specified, ignoring this device.
[ 2030.748] (II) This device may have been added with another device file.
[ 2030.748] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 2030.748] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event7)
[ 2030.748] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
[ 2030.748] (II) Using input driver 'evdev' for 'HP Truevision HD'
[ 2030.748] Option "XkbRules" "evdev"
[ 2030.748] Option "XkbModel" "pc104"
[ 2030.748] Option "XkbLayout" "us"
[ 2030.748] Option "_source" "server/udev"
[ 2030.748] Option "name" "HP Truevision HD"
[ 2030.748] Option "path" "/dev/input/event7"
[ 2030.748] Option "device" "/dev/input/event7"
[ 2030.748] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
[ 2030.748] Option "driver" "evdev"
[ 2030.748] (**) HP Truevision HD: always reports core events
[ 2030.748] (**) evdev: HP Truevision HD: Device: "/dev/input/event7"
[ 2030.748] (--) evdev: HP Truevision HD: Vendor 0x5c8 Product 0x33a
[ 2030.748] (--) evdev: HP Truevision HD: Found keys
[ 2030.748] (II) evdev: HP Truevision HD: Configuring as keyboard
[ 2030.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
[ 2030.748] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 7)
[ 2030.748] (**) Option "xkb_rules" "evdev"
[ 2030.748] (**) Option "xkb_model" "pc104"
[ 2030.748] (**) Option "xkb_layout" "us"
[ 2030.748] (II) XKB: Reusing cached keymap
[ 2030.749] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 2030.749] (II) No input driver specified, ignoring this device.
[ 2030.749] (II) This device may have been added with another device file.
[ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 2030.749] (II) No input driver specified, ignoring this device.
[ 2030.749] (II) This device may have been added with another device file.
[ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 2030.749] (II) No input driver specified, ignoring this device.
[ 2030.749] (II) This device may have been added with another device file.
[ 2030.749] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
[ 2030.749] (II) No input driver specified, ignoring this device.
[ 2030.749] (II) This device may have been added with another device file.
[ 2030.749] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2030.750] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2030.750] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2030.750] Option "XkbRules" "evdev"
[ 2030.750] Option "XkbModel" "pc104"
[ 2030.750] Option "XkbLayout" "us"
[ 2030.750] Option "_source" "server/udev"
[ 2030.750] Option "name" "AT Translated Set 2 keyboard"
[ 2030.750] Option "path" "/dev/input/event0"
[ 2030.750] Option "device" "/dev/input/event0"
[ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2030.750] Option "driver" "evdev"
[ 2030.750] (**) AT Translated Set 2 keyboard: always reports core events
[ 2030.750] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2030.750] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2030.750] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2030.750] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 2030.750] (**) Option "xkb_rules" "evdev"
[ 2030.750] (**) Option "xkb_model" "pc104"
[ 2030.750] (**) Option "xkb_layout" "us"
[ 2030.750] (II) XKB: Reusing cached keymap
[ 2030.750] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 2030.750] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 2030.750] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 2030.750] Option "XkbRules" "evdev"
[ 2030.750] Option "XkbModel" "pc104"
[ 2030.750] Option "XkbLayout" "us"
[ 2030.750] Option "_source" "server/udev"
[ 2030.750] Option "name" "SynPS/2 Synaptics TouchPad"
[ 2030.750] Option "path" "/dev/input/event10"
[ 2030.750] Option "device" "/dev/input/event10"
[ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
[ 2030.750] Option "driver" "evdev"
[ 2030.750] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2030.750] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
[ 2030.750] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device
[ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 2030.751] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2030.751] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
[ 2030.751] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 9)
[ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2030.751] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2030.751] (II) No input driver specified, ignoring this device.
[ 2030.751] (II) This device may have been added with another device file.
[ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
[ 2030.751] (II) No input driver specified, ignoring this device.
[ 2030.751] (II) This device may have been added with another device file.
[ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 2030.751] (II) No input driver specified, ignoring this device.
[ 2030.751] (II) This device may have been added with another device file.
[ 2030.752] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 2030.752] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2030.752] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 2030.752] Option "XkbRules" "evdev"
[ 2030.752] Option "XkbModel" "pc104"
[ 2030.752] Option "XkbLayout" "us"
[ 2030.752] Option "_source" "server/udev"
[ 2030.752] Option "name" "HP WMI hotkeys"
[ 2030.752] Option "path" "/dev/input/event9"
[ 2030.752] Option "device" "/dev/input/event9"
[ 2030.752] Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 2030.752] Option "driver" "evdev"
[ 2030.752] (**) HP WMI hotkeys: always reports core events
[ 2030.752] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
[ 2030.752] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 2030.752] (--) evdev: HP WMI hotkeys: Found keys
[ 2030.752] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 2030.752] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 2030.752] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 10)
[ 2030.752] (**) Option "xkb_rules" "evdev"
[ 2030.752] (**) Option "xkb_model" "pc104"
[ 2030.752] (**) Option "xkb_layout" "us"
[ 2030.752] (II) XKB: Reusing cached keymap
[ 2031.256] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2031.256] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2031.256] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 2031.256] (**) NVIDIA(0): all display devices.)
[ 2031.256] (II) NVIDIA(0): Frequency information for CRT-0:
[ 2031.256] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
[ 2031.256] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
[ 2031.256] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
[ 2031.256] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
[ 2031.257] (II) NVIDIA(GPU-0):
[ 2031.257] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
[ 2031.257] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2031.257] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2031.257] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2031.257] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
[ 2031.257] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
[ 2031.258] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
[ 2031.258] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
[ 2031.258] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
[ 2031.258] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
[ 2031.258] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
[ 2031.258] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
[ 2031.258] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
[ 2031.258] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
[ 2031.258] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
[ 2031.258] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
[ 2031.258] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
[ 2031.258] (II) NVIDIA(GPU-0):
[ 2031.506] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2031.506] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2031.506] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 2031.506] (**) NVIDIA(0): all display devices.)
[ 2031.506] (II) NVIDIA(0): Frequency information for CRT-0:
[ 2031.506] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
[ 2031.506] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
[ 2031.506] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
[ 2031.506] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
[ 2031.509] (II) NVIDIA(GPU-0):
[ 2031.509] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
[ 2031.509] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
[ 2031.509] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
[ 2031.509] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
[ 2031.509] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
[ 2031.509] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
[ 2031.509] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
[ 2031.509] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
[ 2031.509] (II) NVIDIA(GPU-0):
[ 2046.582] (II) evdev: HP WMI hotkeys: Close
[ 2046.582] (II) UnloadModule: "evdev"
[ 2046.623] (II) evdev: SynPS/2 Synaptics TouchPad: Close
[ 2046.623] (II) UnloadModule: "evdev"
[ 2046.663] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2046.663] (II) UnloadModule: "evdev"
[ 2046.702] (II) evdev: HP Truevision HD: Close
[ 2046.702] (II) UnloadModule: "evdev"
[ 2046.741] (II) evdev: Power Button: Close
[ 2046.741] (II) UnloadModule: "evdev"
[ 2046.794] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 2046.795] (EE) Server terminated successfully (0). Closing log file.
xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
Section "Module"
Load "glx"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
# VendorName "Unknown"
# ModelName "Unknown"
# HorizSync 28.0 - 33.0
# VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:1:0:0"
# Option "UseEDID" "true"
Option "ConnectedMonitor" "DFP-0"
# Option "CustomEDID" "CRT-0:/etc/X11/1280x1024.bin"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSectiondmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009a3befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009a3bf000-0x000000009aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP ENVY dv7 Notebook PC/181D, BIOS F.12 09/03/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask F80000000 write-back
[ 0.000000] 7 base 25F600000 mask FFFE00000 uncachable
[ 0.000000] 8 base 25F800000 mask FFF800000 uncachable
[ 0.000000] 9 base 260000000 mask FE0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
[ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
[ 0.000000] [mem 0x25c000000-0x25f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
[ 0.000000] [mem 0x200000000-0x25bffffff] page 2M
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0x9a3befff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0x9a1fffff] page 2M
[ 0.000000] [mem 0x9a200000-0x9a3befff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
[ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x379b0000-0x37ccffff]
[ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000009affe210 0000A4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 000000009affb000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 000000009afe4000 0130E0 (v01 HPQOEM 181D 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 000000009afb8000 000040
[ 0.000000] ACPI: UEFI 000000009affd000 000236 (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 000000009affc000 0000A5 (v32 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 000000009affa000 000038 (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 000000009aff9000 00008C (v03 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 000000009aff8000 00003C (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: WDAT 000000009afe3000 000224 (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afe1000 001068 (v01 HPQOEM 181D 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009afdf000 000028 (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: ASPT 000000009afdd000 000034 (v07 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 000000009afdc000 000034 (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 000000009afda000 000044 (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 000000009afd9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afd8000 000926 (v01 HPQOEM 181D 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afd7000 000A92 (v01 HPQOEM 181D 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afd3000 002E84 (v01 HPQOEM 181D 00001000 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
[ 0.000000] NODE_DATA [mem 0x25f5f3000-0x25f5f7fff]
[ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x25f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00090fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0x9a3befff]
[ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
[ 0.000000] node 0: [mem 0x100000000-0x25f5fffff]
[ 0.000000] On node 0 totalpages: 2070351
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9799 pages used for memmap
[ 0.000000] DMA32 zone: 627135 pages, LIFO batch:31
[ 0.000000] Normal zone: 22488 pages used for memmap
[ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9a3bf000-0x9aebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86336 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037979
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8068224K/8281404K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 213180K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2394.589 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.72 BogoMIPS (lpj=7981963)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000023] Security Framework initialized
[ 0.000029] AppArmor: AppArmor disabled by boot time parameter
[ 0.000030] Yama: becoming mindful.
[ 0.000417] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001940] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002614] Mount-cache hash table entries: 256
[ 0.002739] Initializing cgroup subsys memory
[ 0.002743] Initializing cgroup subsys devices
[ 0.002744] Initializing cgroup subsys freezer
[ 0.002746] Initializing cgroup subsys net_cls
[ 0.002747] Initializing cgroup subsys blkio
[ 0.002763] CPU: Physical Processor ID: 0
[ 0.002764] CPU: Processor Core ID: 0
[ 0.002768] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003048] mce: CPU supports 9 MCE banks
[ 0.003058] CPU0: Thermal monitoring enabled (TM1)
[ 0.003064] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
[ 0.003142] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
[ 0.003906] ACPI: Core revision 20131115
[ 0.009053] ACPI: All ACPI Tables successfully acquired
[ 0.053822] ftrace: allocating 21057 entries in 83 pages
[ 0.061910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.094942] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.094948] TSC deadline timer enabled
[ 0.094955] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.094960] ... version: 3
[ 0.094960] ... bit width: 48
[ 0.094961] ... generic registers: 4
[ 0.094962] ... value mask: 0000ffffffffffff
[ 0.094962] ... max period: 0000ffffffffffff
[ 0.094963] ... fixed-purpose events: 3
[ 0.094964] ... event mask: 000000070000000f
[ 0.121742] x86: Booting SMP configuration:
[ 0.135256] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.121746] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.256907] x86: Booted up 1 node, 8 CPUs
[ 0.256909] smpboot: Total of 8 processors activated (38328.81 BogoMIPS)
[ 0.262487] devtmpfs: initialized
[ 0.264464] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.265037] RTC time: 21:55:49, date: 02/28/14
[ 0.265063] NET: Registered protocol family 16
[ 0.265128] cpuidle: using governor ladder
[ 0.265129] cpuidle: using governor menu
[ 0.265147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.265148] ACPI: bus type PCI registered
[ 0.265150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.265197] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.265199] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.282064] PCI: Using configuration type 1 for base access
[ 0.282527] bio: create slab <bio-0> at 0
[ 0.282615] ACPI: Added _OSI(Module Device)
[ 0.282616] ACPI: Added _OSI(Processor Device)
[ 0.282617] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.282618] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.285086] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.312765] ACPI Error: No handler for Region [RAM_] (ffff880253874090) [EmbeddedControl] (20131115/evregion-162)
[ 0.312767] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
[ 0.312770] ACPI Error: Method parse/execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/psparse-536)
[ 0.312774] ACPI Error: Method execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/uteval-103)
[ 0.313004] ACPI: SSDT 000000009ae3a018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.313310] ACPI: Dynamic OEM Table Load:
[ 0.313311] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.325950] ACPI: SSDT 000000009aeada98 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.326272] ACPI: Dynamic OEM Table Load:
[ 0.326273] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.339208] ACPI: SSDT 000000009ababd98 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.339508] ACPI: Dynamic OEM Table Load:
[ 0.339509] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 1.238575] ACPI: Interpreter enabled
[ 1.238580] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 1.238584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 1.238594] ACPI: (supports S0 S3 S4 S5)
[ 1.238595] ACPI: Using IOAPIC for interrupt routing
[ 1.238612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.238799] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 1.260983] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
[ 1.321167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.321171] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.321214] \_SB_.PCI0:_OSC invalid UUID
[ 1.321215] _OSC request data:1 1f 0
[ 1.321218] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 1.321676] PCI host bridge to bus 0000:00
[ 1.321678] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 1.321679] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.321680] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.321682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.321683] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 1.321688] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 1.321749] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 1.321772] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.321801] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 1.321826] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 1.321834] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
[ 1.321839] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.321842] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 1.321916] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 1.321936] pci 0000:00:14.0: reg 0x10: [mem 0xd4600000-0xd460ffff 64bit]
[ 1.322002] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.322033] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 1.322061] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 1.322083] pci 0000:00:16.0: reg 0x10: [mem 0xd4614000-0xd461400f 64bit]
[ 1.322154] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.322218] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 1.322238] pci 0000:00:1a.0: reg 0x10: [mem 0xd4619000-0xd46193ff]
[ 1.322321] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.322363] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.322390] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 1.322404] pci 0000:00:1b.0: reg 0x10: [mem 0xd4610000-0xd4613fff 64bit]
[ 1.322466] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.322498] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.322527] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 1.322652] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.322697] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.322726] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 1.322855] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.322900] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 1.322929] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 1.323056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.323100] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 1.323125] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
[ 1.323197] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.323232] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 1.323263] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 1.323282] pci 0000:00:1d.0: reg 0x10: [mem 0xd4618000-0xd46183ff]
[ 1.323366] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.323407] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.323434] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 1.323584] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 1.323601] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
[ 1.323608] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
[ 1.323615] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
[ 1.323623] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
[ 1.323630] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 1.323637] pci 0000:00:1f.2: reg 0x24: [mem 0xd4617000-0xd46177ff]
[ 1.323678] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.323727] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 1.323741] pci 0000:00:1f.3: reg 0x10: [mem 0xd4615000-0xd46150ff 64bit]
[ 1.323760] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
[ 1.323853] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
[ 1.323862] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 1.323869] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.323875] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 1.323880] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
[ 1.323884] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 1.323917] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 1.330552] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 1.330557] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.330562] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
[ 1.330568] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 1.330681] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 1.330867] pci 0000:08:00.0: [10ec:5229] type 00 class 0xff0000
[ 1.330931] pci 0000:08:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
[ 1.331423] pci 0000:08:00.0: supports D1 D2
[ 1.331424] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
[ 1.331502] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 1.337279] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
[ 1.337286] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 1.337294] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
[ 1.337304] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 1.337465] pci 0000:0a:00.0: [8086:0887] type 00 class 0x028000
[ 1.337511] pci 0000:0a:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit]
[ 1.337733] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
[ 1.337776] pci 0000:0a:00.0: System wakeup disabled by ACPI
[ 1.343946] pci 0000:00:1c.3: PCI bridge to [bus 0a]
[ 1.343959] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
[ 1.344076] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
[ 1.344094] pci 0000:0b:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 1.344127] pci 0000:0b:00.0: reg 0x18: [mem 0xd4404000-0xd4404fff 64bit pref]
[ 1.344147] pci 0000:0b:00.0: reg 0x20: [mem 0xd4400000-0xd4403fff 64bit pref]
[ 1.344234] pci 0000:0b:00.0: supports D1 D2
[ 1.344236] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.373952] pci 0000:0b:00.0: System wakeup disabled by ACPI
[ 1.380639] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[ 1.380647] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 1.380654] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
[ 1.381137] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.381174] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.381209] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.381244] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.381278] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.381313] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.381348] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.381384] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.381615] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 1.381620] ACPI: \_SB_.PCI0: notify handler is installed
[ 1.381661] Found 1 acpi root devices
[ 1.381686] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.381736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.381739] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.381740] vgaarb: loaded
[ 1.381741] vgaarb: bridge control possible 0000:01:00.0
[ 1.381741] vgaarb: no bridge control possible 0000:00:02.0
[ 1.381759] PCI: Using ACPI for IRQ routing
[ 1.387711] PCI: pci_cache_line_size set to 64 bytes
[ 1.387850] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
[ 1.387851] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 1.387852] e820: reserve RAM buffer [mem 0x9a3bf000-0x9bffffff]
[ 1.387853] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 1.387854] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[ 1.387910] NetLabel: Initializing
[ 1.387911] NetLabel: domain hash size = 128
[ 1.387912] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.387923] NetLabel: unlabeled traffic allowed by default
[ 1.387936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.387940] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.389961] Switched to clocksource hpet
[ 1.392856] pnp: PnP ACPI init
[ 1.392865] ACPI: bus type PNP registered
[ 1.392884] pnp 00:00: [dma 4]
[ 1.392898] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.392912] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.392979] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.392999] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.393026] system 00:04: [io 0x1100-0x110f] has been reserved
[ 1.393028] system 00:04: [io 0xffff] has been reserved
[ 1.393029] system 00:04: [io 0xffff] has been reserved
[ 1.393031] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 1.393032] system 00:04: [io 0x0458-0x047f] has been reserved
[ 1.393033] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.393035] system 00:04: [io 0x1200-0x1207] has been reserved
[ 1.393036] system 00:04: [mem 0xfe800000-0xfe8001ff] has been reserved
[ 1.393038] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.393055] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.393085] system 00:06: [io 0x0454-0x0457] has been reserved
[ 1.393087] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.393126] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 1.393148] pnp 00:08: Plug and Play ACPI device, IDs SYN1e5e SYN1e00 SYN0002 PNP0f13 (active)
[ 1.393228] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.393230] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.393231] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.393233] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.393234] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.393235] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.393237] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.393238] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.393239] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.393241] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 1.393242] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.393419] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[ 1.393420] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[ 1.393422] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.393458] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 1.393478] pnp: PnP ACPI: found 12 devices
[ 1.393479] ACPI: bus type PNP unregistered
[ 1.399368] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 1.399417] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[ 1.399419] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 1.399420] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.399422] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
[ 1.399424] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 1.399427] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 1.399444] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
[ 1.399447] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 1.399452] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
[ 1.399456] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 1.399465] pci 0000:00:1c.3: PCI bridge to [bus 0a]
[ 1.399471] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
[ 1.399482] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[ 1.399485] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 1.399489] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
[ 1.399497] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.399499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.399500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.399501] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 1.399502] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 1.399503] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd3ffffff]
[ 1.399505] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 1.399506] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 1.399507] pci_bus 0000:08: resource 1 [mem 0xd1000000-0xd1ffffff]
[ 1.399508] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 1.399510] pci_bus 0000:0a: resource 1 [mem 0xd4500000-0xd45fffff]
[ 1.399511] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[ 1.399512] pci_bus 0000:0b: resource 1 [mem 0xd4400000-0xd44fffff]
[ 1.399530] NET: Registered protocol family 2
[ 1.399642] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.399750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.399849] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.399860] TCP: reno registered
[ 1.399870] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.399890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.399937] NET: Registered protocol family 1
[ 1.399946] pci 0000:00:02.0: Boot video device
[ 1.780500] PCI: CLS 64 bytes, default 64
[ 1.780530] Unpacking initramfs...
[ 1.820767] Freeing initrd memory: 3200K (ffff8800379b0000 - ffff880037cd0000)
[ 1.820771] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.820773] software IO TLB [mem 0x963bf000-0x9a3bf000] (64MB) mapped at [ffff8800963bf000-ffff88009a3befff]
[ 1.820794] Simple Boot Flag at 0x44 set to 0x1
[ 1.820989] Scanning for low memory corruption every 60 seconds
[ 1.821175] audit: initializing netlink socket (disabled)
[ 1.821183] type=2000 audit(1393624549.773:1): initialized
[ 1.830154] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.831019] zbud: loaded
[ 1.831130] VFS: Disk quotas dquot_6.5.2
[ 1.831155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.831254] msgmni has been set to 15764
[ 1.831287] Key type big_key registered
[ 1.831483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.831523] io scheduler noop registered
[ 1.831524] io scheduler deadline registered
[ 1.831539] io scheduler cfq registered (default)
[ 1.831652] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.832086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.832096] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.832122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 1.832123] vesafb: scrolling: redraw
[ 1.832124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.832682] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k
[ 1.946268] Console: switching to colour frame buffer device 240x67
[ 2.059378] fb0: VESA VGA frame buffer device
[ 2.059386] intel_idle: MWAIT substates: 0x21120
[ 2.059387] intel_idle: v0.4 model 0x3A
[ 2.059387] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.059528] GHES: HEST is not enabled!
[ 2.059562] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.059853] Linux agpgart interface v0.103
[ 2.059899] rtc_cmos 00:05: RTC can wake from S4
[ 2.060005] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.060033] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.060039] Intel P-state driver initializing.
[ 2.060046] Intel pstate controlling: cpu 0
[ 2.060056] Intel pstate controlling: cpu 1
[ 2.060066] Intel pstate controlling: cpu 2
[ 2.060075] Intel pstate controlling: cpu 3
[ 2.060081] Intel pstate controlling: cpu 4
[ 2.060087] Intel pstate controlling: cpu 5
[ 2.060094] Intel pstate controlling: cpu 6
[ 2.060101] Intel pstate controlling: cpu 7
[ 2.060170] drop_monitor: Initializing network drop monitor service
[ 2.060205] TCP: cubic registered
[ 2.060258] NET: Registered protocol family 10
[ 2.060356] NET: Registered protocol family 17
[ 2.060361] Key type dns_resolver registered
[ 2.060562] registered taskstats version 1
[ 2.061180] Magic number: 2:200:956
[ 2.061210] memory memory9: hash matches
[ 2.061260] rtc_cmos 00:05: setting system clock to 2014-02-28 21:55:50 UTC (1393624550)
[ 2.061289] PM: Hibernation image not present or could not be loaded.
[ 2.061821] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
[ 2.061822] Write protecting the kernel read-only data: 8192k
[ 2.063314] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
[ 2.064187] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
[ 2.070995] systemd-udevd[76]: starting version 208
[ 2.081683] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.086896] rtsx_pci 0000:08:00.0: irq 41 for MSI/MSI-X
[ 2.086940] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[ 2.087062] ACPI: bus type USB registered
[ 2.087089] usbcore: registered new interface driver usbfs
[ 2.087162] usbcore: registered new interface driver hub
[ 2.087210] usbcore: registered new device driver usb
[ 2.087615] SCSI subsystem initialized
[ 2.087789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.087987] ehci-pci: EHCI PCI platform driver
[ 2.088114] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.088121] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.088137] ehci-pci 0000:00:1a.0: debug port 2
[ 2.088526] libata version 3.00 loaded.
[ 2.092034] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.092051] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4619000
[ 2.103911] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.104041] hub 1-0:1.0: USB hub found
[ 2.104046] hub 1-0:1.0: 2 ports detected
[ 2.104210] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.104214] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.104225] ehci-pci 0000:00:1d.0: debug port 2
[ 2.107112] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.107123] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.108127] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.108140] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4618000
[ 2.117274] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.117508] hub 2-0:1.0: USB hub found
[ 2.117514] hub 2-0:1.0: 2 ports detected
[ 2.117750] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.117756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.117854] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.117873] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 2.118100] hub 3-0:1.0: USB hub found
[ 2.118108] hub 3-0:1.0: 4 ports detected
[ 2.118349] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.118351] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 2.118452] hub 4-0:1.0: USB hub found
[ 2.118462] hub 4-0:1.0: 4 ports detected
[ 2.135939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.150760] ahci 0000:00:1f.2: version 3.0
[ 2.150968] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 2.164071] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl RAID mode
[ 2.164079] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 2.171405] scsi0 : ahci
[ 2.171666] scsi1 : ahci
[ 2.171894] scsi2 : ahci
[ 2.172116] scsi3 : ahci
[ 2.172313] scsi4 : ahci
[ 2.172447] scsi5 : ahci
[ 2.172504] ata1: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617100 irq 43
[ 2.172514] ata2: DUMMY
[ 2.172516] ata3: DUMMY
[ 2.172517] ata4: DUMMY
[ 2.172519] ata5: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617300 irq 43
[ 2.172520] ata6: DUMMY
[ 2.410959] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.491002] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.491072] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.502872] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
[ 2.502878] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.506430] ata5.00: ATAPI: hp DVD-RAM UJ8D1, H.01, max UDMA/100
[ 2.512780] ata1.00: configured for UDMA/133
[ 2.513113] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
[ 2.524950] ata5.00: configured for UDMA/100
[ 2.531477] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8D1 H.01 PQ: 0 ANSI: 5
[ 2.534925] hub 1-1:1.0: USB hub found
[ 2.534975] hub 1-1:1.0: 6 ports detected
[ 2.536606] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 2.536677] sd 0:0:0:0: [sda] Write Protect is off
[ 2.536680] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.536701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.537540] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
[ 2.538190] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.542465] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.542469] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.542686] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.608731] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.651327] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.651588] systemd[1]: No hostname configured.
[ 2.651596] systemd[1]: Set hostname to <localhost>.
[ 2.653530] random: systemd urandom read with 42 bits of entropy available
[ 2.657173] systemd-fstab-generator[151]: Checking was requested for "nas:/mnt/HD/HD_a2/STORE01", but it is not a device.
[ 2.687501] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.687558] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.687572] systemd[1]: Starting Login Prompts.
[ 2.687585] systemd[1]: Reached target Login Prompts.
[ 2.687595] systemd[1]: Starting Remote File Systems.
[ 2.687605] systemd[1]: Reached target Remote File Systems.
[ 2.687615] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 2.687642] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.687652] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.687669] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.687679] systemd[1]: Starting LVM2 metadata daemon socket.
[ 2.687712] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.687722] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.687759] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.687772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 2.687812] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.687822] systemd[1]: Starting Paths.
[ 2.687832] systemd[1]: Reached target Paths.
[ 2.687842] systemd[1]: Starting Journal Socket.
[ 2.687878] systemd[1]: Listening on Journal Socket.
[ 2.687895] systemd[1]: Mounting Debug File System...
[ 2.688266] systemd[1]: Starting Journal Service...
[ 2.688521] systemd[1]: Started Journal Service.
[ 2.694471] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[ 2.702863] systemd-journald[157]: Vacuuming done, freed 0 bytes
[ 2.708483] FS-Cache: Loaded
[ 2.710845] usb 3-3: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.713390] RPC: Registered named UNIX socket transport module.
[ 2.713392] RPC: Registered udp transport module.
[ 2.713393] RPC: Registered tcp transport module.
[ 2.713394] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.718880] FS-Cache: Netfs 'nfs' registered for caching
[ 2.728296] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 2.741906] systemd-udevd[202]: starting version 208
[ 2.779466] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 2.780942] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 2.780948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.780952] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 2.780955] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
[ 2.780958] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
[ 2.780961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.780963] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 2.780966] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
[ 2.780969] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
[ 2.780971] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.780973] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.782830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.785766] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 2.791210] ACPI: Lid Switch [LID0]
[ 2.791504] [drm] Initialized drm 1.1.0 20060810
[ 2.791605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.791609] ACPI: Power Button [PWRF]
[ 2.792665] wmi: Mapper loaded
[ 2.792681] hp_accel: laptop model unknown, using default axes configuration
[ 2.797256] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 2.802959] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.802966] r8169 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.803223] r8169 0000:0b:00.0: irq 46 for MSI/MSI-X
[ 2.803494] r8169 0000:0b:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011eee000, a0:b3:cc:4b:1a:7e, XID 0c900800 IRQ 46
[ 2.803496] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.811332] cfg80211: Calling CRDA to update world regulatory domain
[ 2.815328] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 2.816642] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 2.816644] Copyright(c) 2003-2013 Intel Corporation
[ 2.816736] iwlwifi 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.816860] iwlwifi 0000:0a:00.0: irq 47 for MSI/MSI-X
[ 2.817888] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.818258] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 2.818636] platform microcode: Direct firmware load failed with error -2
[ 2.818639] platform microcode: Falling back to user helper
[ 2.821802] iwlwifi 0000:0a:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 2.824537] tsc: Refined TSC clocksource calibration: 2394.561 MHz
[ 2.826546] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.828014] usbcore: registered new interface driver usbhid
[ 2.828016] usbhid: USB HID core driver
[ 2.832266] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.832334] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.832373] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 2.832658] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 2.832662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.834846] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 2.834848] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 2.834850] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.834851] iwlwifi 0000:0a:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 2.834955] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
[ 2.835666] usbcore: registered new interface driver snd-usb-audio
[ 2.854044] iTCO_vendor_support: vendor-support=0
[ 2.854466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 2.854514] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.854638] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.856761] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.860498] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[ 2.860514] platform microcode: Direct firmware load failed with error -2
[ 2.860516] platform microcode: Falling back to user helper
[ 2.863566] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.3/input/input10
[ 2.863734] hid-generic 0003:08BB:2902.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-3/input3
[ 2.867484] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[ 2.867498] platform microcode: Direct firmware load failed with error -2
[ 2.867500] platform microcode: Falling back to user helper
[ 2.870088] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[ 2.870100] platform microcode: Direct firmware load failed with error -2
[ 2.870102] platform microcode: Falling back to user helper
[ 2.870542] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
[ 2.870561] platform microcode: Direct firmware load failed with error -2
[ 2.870563] platform microcode: Falling back to user helper
[ 2.871275] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
[ 2.871285] platform microcode: Direct firmware load failed with error -2
[ 2.871288] platform microcode: Falling back to user helper
[ 2.871938] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
[ 2.871949] platform microcode: Direct firmware load failed with error -2
[ 2.871952] platform microcode: Falling back to user helper
[ 2.872242] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
[ 2.872254] platform microcode: Direct firmware load failed with error -2
[ 2.872257] platform microcode: Falling back to user helper
[ 2.872575] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.878423] systemd-udevd[206]: renamed network interface eth0 to eno1
[ 2.881987] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.890802] systemd-journald[157]: Received request to flush runtime journal from PID 1
[ 2.901323] systemd-udevd[217]: renamed network interface wlan0 to wlo1
[ 2.908030] ACPI: AC Adapter [ADP1] (on-line)
[ 2.941825] hub 2-1:1.0: USB hub found
[ 2.941930] hub 2-1:1.0: 8 ports detected
[ 3.021509] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 3.061674] intel_rapl: domain uncore energy ctr 8617:8617 not working, skip
[ 3.074806] lis3lv02d: 8 bits 3DC sensor found
[ 3.135241] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
[ 3.142912] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
[ 3.171642] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 3.233041] nvidia: module license 'NVIDIA' taints kernel.
[ 3.233045] Disabling lock debugging due to kernel taint
[ 3.238226] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 3.238279] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 3.238457] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 3.238462] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
[ 3.356112] media: Linux media interface: v0.10
[ 3.360422] Linux video capture interface: v2.00
[ 3.365597] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:033a)
[ 3.377291] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
[ 3.377488] usbcore: registered new interface driver uvcvideo
[ 3.377494] USB Video Class driver (1.1.1)
[ 3.393157] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
[ 3.400907] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
[ 3.425257] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[ 3.458983] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 3.473371] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 3.521478] Bluetooth: Core ver 2.17
[ 3.521492] NET: Registered protocol family 31
[ 3.521493] Bluetooth: HCI device and connection manager initialized
[ 3.521499] Bluetooth: HCI socket layer initialized
[ 3.521501] Bluetooth: L2CAP socket layer initialized
[ 3.521505] Bluetooth: SCO socket layer initialized
[ 3.523209] usbcore: registered new interface driver btusb
[ 3.597251] r8169 0000:0b:00.0 eno1: link down
[ 3.597286] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 3.825665] Switched to clocksource tsc
[ 4.034513] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2055, fw id: 1107424
[ 4.062727] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
[ 4.071722] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071771] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071795] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071832] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071854] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071922] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071944] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.104186] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 4.107557] mousedev: PS/2 mouse device common for all mice
[ 4.326086] thermal LNXTHERM:00: registered as thermal_zone1
[ 4.326092] ACPI: Thermal Zone [TZS0] (69 C)
[ 4.606281] [Firmware Bug]: No valid trip found
[ 5.280111] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
[ 5.283560] random: nonblocking pool is initialized
[ 5.694087] ACPI: Battery Slot [BAT0] (battery present)
[ 7.035020] thermal LNXTHERM:02: registered as thermal_zone2
[ 7.035026] ACPI: Thermal Zone [TZS2] (57 C)
[ 8.889924] thermal LNXTHERM:03: registered as thermal_zone3
[ 8.889929] ACPI: Thermal Zone [TZS3] (30 C)
[ 9.408442] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 10.251376] type=1006 audit(1393624558.679:2): pid=348 uid=0 old auid=4294967295 new auid=120 old ses=4294967295 new ses=1 res=1
[ 11.338226] traps: gnome-shell[416] trap int3 ip:7f1024ce4289 sp:7fffc13c81f0 error:0
[ 33.022441] type=1006 audit(1393624581.429:3): pid=439 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=2 res=1
[ 33.028194] type=1006 audit(1393624581.436:4): pid=440 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=3 res=1
lsmod
Module Size Used by
joydev 9631 0
mousedev 10247 0
btusb 19648 0
bluetooth 326343 2 btusb
uvcvideo 72804 0
videobuf2_vmalloc 3304 1 uvcvideo
videobuf2_memops 2335 1 videobuf2_vmalloc
videobuf2_core 28243 1 uvcvideo
videodev 111840 2 uvcvideo,videobuf2_core
media 11719 2 uvcvideo,videodev
nvidia 10621191 29
intel_rapl 11776 0
x86_pkg_temp_thermal 6991 0
intel_powerclamp 8802 0
coretemp 6358 0
kvm_intel 131532 0
kvm 396221 1 kvm_intel
crct10dif_pclmul 4682 0
crct10dif_common 1372 1 crct10dif_pclmul
crc32_pclmul 2923 0
crc32c_intel 14185 0
ghash_clmulni_intel 4405 0
aesni_intel 45548 0
aes_x86_64 7399 1 aesni_intel
lrw 3565 1 aesni_intel
gf128mul 5858 1 lrw
glue_helper 4417 1 aesni_intel
ablk_helper 2004 1 aesni_intel
cryptd 8409 3 ghash_clmulni_intel,aesni_intel,ablk_helper
hid_generic 1153 0
hp_wmi 7595 0
sparse_keymap 3146 1 hp_wmi
arc4 2000 2
iTCO_wdt 5407 0
iTCO_vendor_support 1929 1 iTCO_wdt
mxm_wmi 1467 0
iwldvm 167738 0
mac80211 474681 1 iwldvm
snd_usb_audio 117811 0
usbhid 40545 0
snd_usbmidi_lib 19755 1 snd_usb_audio
hid 90902 2 hid_generic,usbhid
snd_rawmidi 18742 1 snd_usbmidi_lib
snd_seq_device 5180 1 snd_rawmidi
microcode 15216 0
evdev 11045 11
psmouse 88171 0
snd_hda_codec_hdmi 36379 1
iwlwifi 140193 1 iwldvm
serio_raw 5009 0
snd_hda_codec_idt 43508 1
cfg80211 408199 3 iwlwifi,mac80211,iwldvm
i2c_i801 11269 0
rtsx_pci_ms 7258 0
r8169 58423 0
memstick 7504 1 rtsx_pci_ms
rfkill 15651 4 cfg80211,hp_wmi,bluetooth
mii 4027 1 r8169
thermal 8556 0
snd_hda_intel 37352 0
snd_hda_codec 150017 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
intel_gtt 12664 0
drm_kms_helper 35710 0
snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
drm 239102 3 drm_kms_helper,nvidia
battery 7565 0
snd_pcm 77822 4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
ac 3334 0
snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
snd_timer 18718 1 snd_pcm
hp_accel 16520 0
i2c_algo_bit 5391 0
mei_me 9552 0
i2c_core 24760 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
lis3lv02d 11283 1 hp_accel
input_polldev 2818 1 lis3lv02d
snd 59029 11 snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
shpchp 25425 0
mei 62867 1 mei_me
wmi 8251 2 hp_wmi,mxm_wmi
video 11425 0
soundcore 5418 1 snd
lpc_ich 13368 0
processor 24620 0
button 4605 0
nfs 191568 0
lockd 76942 1 nfs
sunrpc 233786 2 nfs,lockd
fscache 47797 1 nfs
ext4 473259 2
crc16 1359 2 ext4,bluetooth
mbcache 6074 1 ext4
jbd2 80912 1 ext4
sr_mod 14930 0
cdrom 34880 1 sr_mod
sd_mod 31361 3
atkbd 16806 0
libps2 4187 2 atkbd,psmouse
rtsx_pci_sdmmc 13911 0
mmc_core 95465 1 rtsx_pci_sdmmc
ahci 23048 2
libahci 21698 1 ahci
libata 172104 2 ahci,libahci
ehci_pci 3928 0
xhci_hcd 144553 0
ehci_hcd 64171 1 ehci_pci
scsi_mod 132250 3 libata,sd_mod,sr_mod
rtsx_pci 32241 2 rtsx_pci_ms,rtsx_pci_sdmmc
usbcore 180208 8 btusb,snd_usb_audio,uvcvideo,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common 1648 1 usbcore
i8042 13366 1 libps2
serio 10721 6 serio_raw,atkbd,i8042,psmouse -
Gcc not working with compiled glibc from PKGBUILD
hello folks, please excuse my english
i like to compile certain parts of my system, between them are the kernel, glibc , zsh, etc.
i had noticed that using a compiled version of glibc from abs results in gcc not working at all ( C compiler cannot create executables logs says). this is weird especially because i hadn't had problems before, i have looked for the error mesagges on Google and a lot of people has had this problem but nobody has a "generic" solution for this
this is the config.log file from one failed compile of mpg123
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by mpg123 configure 1.12.3, which was
generated by GNU Autoconf 2.65. Invocation command line was
$ ./configure --prefix=/usr --with-audio=alsa esd sdl
## Platform. ##
hostname = Soul
uname -m = x86_64
uname -r = 2.6.34.1
uname -s = Linux
uname -v = #1 SMP PREEMPT Tue Jul 6 23:23:17 CLT 2010
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /bin
PATH: /usr/bin
PATH: /usr/local/bin
PATH: /sbin
PATH: /usr/sbin
PATH: /usr/local/sbin
PATH: /usr/share/java/apache-ant/bin
PATH: /usr/lib/perl5/core_perl/bin
## Core tests. ##
configure:2849: checking build system type
configure:2863: result: x86_64-unknown-linux-gnu
configure:2883: checking host system type
configure:2896: result: x86_64-unknown-linux-gnu
configure:2933: checking for a BSD-compatible install
configure:3001: result: /bin/install -c
configure:3012: checking whether build environment is sane
configure:3062: result: yes
configure:3203: checking for a thread-safe mkdir -p
configure:3242: result: /bin/mkdir -p
configure:3255: checking for gawk
configure:3271: found /bin/gawk
configure:3282: result: gawk
configure:3293: checking whether make sets $(MAKE)
configure:3315: result: yes
configure:3402: checking for -Werror in CFLAGS (It breaks tests)
configure:3412: result: no
configure:3423: checking if you are up to something totally static with LDFLAGS/CFLAGS
configure:3443: result: no
configure:3463: checking for style of include used by make
configure:3491: result: GNU
configure:3561: checking for gcc
configure:3577: found /usr/bin/gcc
configure:3588: result: gcc
configure:3817: checking for C compiler version
configure:3826: gcc --version >&5
gcc (GCC) 4.5.1
Copyright (C) 2010 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3837: $? = 0
configure:3826: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: ../configure --prefix=/usr --enable-languages=c,c++,fortran,objc,obj-c++,ada --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --enable-gnu-unique-object --enable-lto --enable-plugin --disable-multilib --disable-libstdcxx-pch --with-system-zlib --with-ppl --with-cloog --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info
Thread model: posix
gcc version 4.5.1 (GCC)
configure:3837: $? = 0
configure:3826: gcc -V >&5
gcc: '-V' option must have argument
configure:3837: $? = 1
configure:3826: gcc -qversion >&5
gcc: unrecognized option '-qversion'
gcc: no input files
configure:3837: $? = 1
configure:3857: checking whether the C compiler works
configure:3879: gcc -march=amdfam10 -O2 -pipe -Wl,--hash-style=gnu -Wl,--as-needed conftest.c >&5
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../lib/crt1.o: In function `_start':
(.text+0x12): undefined reference to `__libc_csu_fini'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../lib/crt1.o: In function `_start':
(.text+0x19): undefined reference to `__libc_csu_init'
collect2: ld returned 1 exit status
configure:3883: $? = 1
configure:3921: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "mpg123"
| #define PACKAGE_TARNAME "mpg123"
| #define PACKAGE_VERSION "1.12.3"
| #define PACKAGE_STRING "mpg123 1.12.3"
| #define PACKAGE_BUGREPORT "[email protected]"
| #define PACKAGE_URL ""
| #define PACKAGE "mpg123"
| #define VERSION "1.12.3"
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:3926: error: in `/var/abs/local/mpg123/src/mpg123-1.12.3':
configure:3930: error: C compiler cannot create executables
See `config.log' for more details.
## Cache variables. ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_CCASFLAGS_set=
ac_cv_env_CCASFLAGS_value=
ac_cv_env_CCAS_set=
ac_cv_env_CCAS_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=amdfam10 -O2 -pipe'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_ESD_CFLAGS_set=
ac_cv_env_ESD_CFLAGS_value=
ac_cv_env_ESD_LIBS_set=
ac_cv_env_ESD_LIBS_value=
ac_cv_env_JACK_CFLAGS_set=
ac_cv_env_JACK_CFLAGS_value=
ac_cv_env_JACK_LIBS_set=
ac_cv_env_JACK_LIBS_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value='-Wl,--hash-style=gnu -Wl,--as-needed'
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_PULSE_CFLAGS_set=
ac_cv_env_PULSE_CFLAGS_value=
ac_cv_env_PULSE_LIBS_set=
ac_cv_env_PULSE_LIBS_value=
ac_cv_env_SDL_CFLAGS_set=
ac_cv_env_SDL_CFLAGS_value=
ac_cv_env_SDL_LIBS_set=
ac_cv_env_SDL_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=x86_64-unknown-linux-gnu
ac_cv_path_install='/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes
## Output variables. ##
ACLOCAL='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/missing --run aclocal-1.11'
AIX_CFLAGS=''
AIX_LDFLAGS=''
AIX_LIBS=''
ALIB_CFLAGS=''
ALIB_LDFLAGS=''
ALIB_LIBS=''
ALSA_CFLAGS=''
ALSA_LDFLAGS=''
ALSA_LIBS=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/missing --run tar'
API_VERSION='25'
AR=''
ARTS_CFLAGS=''
ARTS_LDFLAGS=''
ARTS_LIBS=''
AS=''
AUTOCONF='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/missing --run autoconf'
AUTOHEADER='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/missing --run autoheader'
AUTOMAKE='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/missing --run automake-1.11'
AWK='gawk'
CC='gcc'
CCAS=''
CCASDEPMODE=''
CCASFLAGS=''
CCDEPMODE=''
CFLAGS='-march=amdfam10 -O2 -pipe'
COREAUDIO_CFLAGS=''
COREAUDIO_LDFLAGS=''
COREAUDIO_LIBS=''
CPP=''
CPPFLAGS=''
CYGPATH_W='echo'
DECODER_LOBJ=''
DECODER_OBJ=''
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DSYMUTIL=''
DUMMY_CFLAGS=''
DUMMY_LDFLAGS=''
DUMMY_LIBS=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ESD_CFLAGS=''
ESD_LDFLAGS=''
ESD_LIBS=''
EXEC_LT_LDFLAGS=''
EXEEXT=''
FGREP=''
GREP=''
HAVE_AIX_FALSE=''
HAVE_AIX_TRUE=''
HAVE_ALIB_FALSE=''
HAVE_ALIB_TRUE=''
HAVE_ALSA_FALSE=''
HAVE_ALSA_TRUE=''
HAVE_ARTS_FALSE=''
HAVE_ARTS_TRUE=''
HAVE_COREAUDIO_FALSE=''
HAVE_COREAUDIO_TRUE=''
HAVE_DUMMY_FALSE=''
HAVE_DUMMY_TRUE=''
HAVE_ESD_FALSE=''
HAVE_ESD_TRUE=''
HAVE_HP_FALSE=''
HAVE_HP_TRUE=''
HAVE_JACK_FALSE=''
HAVE_JACK_TRUE=''
HAVE_MINT_FALSE=''
HAVE_MINT_TRUE=''
HAVE_MODULES_FALSE=''
HAVE_MODULES_TRUE=''
HAVE_NAS_FALSE=''
HAVE_NAS_TRUE=''
HAVE_OPENAL_FALSE=''
HAVE_OPENAL_TRUE=''
HAVE_OS2_FALSE=''
HAVE_OS2_TRUE=''
HAVE_OSS_FALSE=''
HAVE_OSS_TRUE=''
HAVE_PORTAUDIO_FALSE=''
HAVE_PORTAUDIO_TRUE=''
HAVE_PULSE_FALSE=''
HAVE_PULSE_TRUE=''
HAVE_SDL_FALSE=''
HAVE_SDL_TRUE=''
HAVE_SGI_FALSE=''
HAVE_SGI_TRUE=''
HAVE_SNDIO_FALSE=''
HAVE_SNDIO_TRUE=''
HAVE_SUN_FALSE=''
HAVE_SUN_TRUE=''
HAVE_WIN32_FALSE=''
HAVE_WIN32_TRUE=''
HP_CFLAGS=''
HP_LDFLAGS=''
HP_LIBS=''
INCLUDE_STDIO_H=''
INCLUDE_STDLIB_H=''
INCLUDE_SYS_TYPE_H=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
JACK_CFLAGS=''
JACK_LDFLAGS=''
JACK_LIBS=''
LD=''
LDFLAGS='-Wl,--hash-style=gnu -Wl,--as-needed'
LFS_LOBJ=''
LIBMPG123_VERSION='25:5:25'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIPO=''
LN_S=''
LTLIBOBJS=''
LT_LDFLAGS='-export-dynamic'
MAKEINFO='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/missing --run makeinfo'
MINT_CFLAGS=''
MINT_LDFLAGS=''
MINT_LIBS=''
MKDIR_P='/bin/mkdir -p'
MODULE_OBJ=''
NAS_CFLAGS=''
NAS_LDFLAGS=''
NAS_LIBS=''
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OPENAL_CFLAGS=''
OPENAL_LDFLAGS=''
OPENAL_LIBS=''
OS2_CFLAGS=''
OS2_LDFLAGS=''
OS2_LIBS=''
OSS_CFLAGS=''
OSS_LDFLAGS=''
OSS_LIBS=''
OTOOL64=''
OTOOL=''
OUTPUT_CFLAGS=''
OUTPUT_LDFLAGS=''
OUTPUT_LIBS=''
OUTPUT_MOD=''
OUTPUT_OBJ=''
PACKAGE='mpg123'
PACKAGE_BUGREPORT='[email protected]'
PACKAGE_NAME='mpg123'
PACKAGE_STRING='mpg123 1.12.3'
PACKAGE_TARNAME='mpg123'
PACKAGE_URL=''
PACKAGE_VERSION='1.12.3'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PORTAUDIO_CFLAGS=''
PORTAUDIO_LDFLAGS=''
PORTAUDIO_LIBS=''
PULSE_CFLAGS=''
PULSE_LDFLAGS=''
PULSE_LIBS=''
RANLIB=''
SDL_CFLAGS=''
SDL_LDFLAGS=''
SDL_LIBS=''
SED=''
SET_MAKE=''
SGI_CFLAGS=''
SGI_LDFLAGS=''
SGI_LIBS=''
SHELL='/bin/sh'
SNDIO_CFLAGS=''
SNDIO_LDFLAGS=''
SNDIO_LIBS=''
STRIP=''
SUN_CFLAGS=''
SUN_LDFLAGS=''
SUN_LIBS=''
VERSION='1.12.3'
WIN32_CFLAGS=''
WIN32_CODES_FALSE=''
WIN32_CODES_TRUE=''
WIN32_LDFLAGS=''
WIN32_LIBS=''
ac_ct_CC='gcc'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCCAS_FALSE=''
am__fastdepCCAS_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host='x86_64-unknown-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
lt_ECHO='echo'
mandir='${datarootdir}/man'
mkdir_p='/bin/mkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "mpg123"
#define PACKAGE_TARNAME "mpg123"
#define PACKAGE_VERSION "1.12.3"
#define PACKAGE_STRING "mpg123 1.12.3"
#define PACKAGE_BUGREPORT "[email protected]"
#define PACKAGE_URL ""
#define PACKAGE "mpg123"
#define VERSION "1.12.3"
configure: exit 77
the parts i had searched on google are specificaly the
"/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../lib/crt1.o: In function `_start':
(.text+0x12): undefined reference to `__libc_csu_fini'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../lib/crt1.o: In function `_start':
(.text+0x19): undefined reference to `__libc_csu_init'"
does anyone have an idea of what could it be?
notice that this doesn't bother me because if i use the glibc from the repositories everything works fine, this is just for curiosity of why it doesn't work
thanks in advanceslacknatcher wrote:
the parts i had searched on google are specificaly the
"/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../lib/crt1.o: In function `_start':
(.text+0x12): undefined reference to `__libc_csu_fini'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../lib/crt1.o: In function `_start':
(.text+0x19): undefined reference to `__libc_csu_init'"
does anyone have an idea of what could it be?
notice that this doesn't bother me because if i use the glibc from the repositories everything works fine, this is just for curiosity of why it doesn't work
thanks in advance
You have stripped glibc too much. See the Arch PKGBUILD and make sure your makepkg.conf has STRIP_BINARY etc defined. -
[SOLVED] Direct Rendering is not working with Catalyst 8.6-1.
I own an ATI Radeon X1300, and everything was working flawlessly with Catalyst 8.5-1, and when I updated the drivers, DRI stopped working. It has happened with me in the past, and the only solution I had found then was to downgrade the drivers. I appreciate your help.
Here is my /etc/X11/Xorg.conf:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 338 270 # 1280x1024 96dpi
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Here is my /var/log/Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux localhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 23 13:57:45 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 1043,815a rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 1043,815a rev f3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 1043,815a rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 1043,815a rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 1043,815a rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:06:0: chip 10de,0053 card f043,815a rev f2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev f2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 1043,812a rev f3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:01:0: chip 1106,3044 card 1043,81fe rev c0 class 0c,00,10 hdr 00
(II) PCI: 05:00:0: chip 1002,7187 card 17ee,7187 rev 00 class 03,00,00 hdr 80
(II) PCI: 05:00:1: chip 1002,71a7 card 17ee,7186 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:9:0), (0,1,1), BCTRL: 0x0204 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:11:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:13:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:14:0), (0,5,5), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 5 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[b]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(--) PCI:*(5:0:0) ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] rev 0, Mem @ 0xd0000000/28, 0xfdef0000/16, I/O @ 0x9c00/8, BIOS @ 0xfdec0000/17
(--) PCI: (5:0:1) ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] (Secondary) rev 0, Mem @ 0xfdee0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[1] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[5] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[6] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[7] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[10] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[11] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[12] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[13] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[14] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[15] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[16] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[17] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[18] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[19] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[20] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[25] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[1] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[5] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[6] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[7] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[10] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[11] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[12] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[13] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[14] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[15] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[16] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[17] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[18] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[19] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[20] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[25] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[18] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[29] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[30] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[32] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.50.3
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 05:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.50.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.501
(II) ATI Proprietary Linux Driver Build Date: Jun 2 2008 22:46:56
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x7187) found
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[18] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[29] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[30] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[32] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x9fa1880
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[20] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[21] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[23] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[26] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[28] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[31] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[32] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[33] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[34] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[35] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 5 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "Radeon X1300/X1550 Series" (Chipset = 0x7187)
(--) fglrx(0): (PciSubVendor = 0x17ee, PciSubDevice = 0x7187)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfdef0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.12
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV515
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.50.3
ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Using adapter: 5:0.0.
(II) fglrx(0): [FB] Find the MC FB aperturs range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR1
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: CRT on secondary DAC [crt2]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PHL Model: 13 Serial#: 1850
(II) fglrx(0): Year: 2005 Week: 9
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.626 redY: 0.340 greenX: 0.288 greenY: 0.608
(II) fglrx(0): blueX: 0.148 blueY: 0.064 whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 94.5 MHz Image Size: 310 x 230 mm
(II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) fglrx(0): Serial No: 09301850
(II) fglrx(0): Monitor name: Philips 107Et
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 72 kHz, PixClock max 110 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff00410c13003a070000
(II) fglrx(0): 090f0103682018782a4f29a057499b26
(II) fglrx(0): 10484ca4420031594559615981800101
(II) fglrx(0): 010101010101ea240060410028303060
(II) fglrx(0): 130036e61000001e000000ff00303933
(II) fglrx(0): 30313835300a20202020000000fc0050
(II) fglrx(0): 68696c697073203130374574000000fd
(II) fglrx(0): 0032a01e480b000a20202020202000b2
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on secondary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 40 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): *Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 (68.7 kHz)
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"x43.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace (35.5 kHz)
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"x85.0 56.25 800 832 896 1048 600 601 604 631 (53.7 kHz)
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"x100.0 68.17 800 848 936 1072 600 601 604 636 +hsync (63.6 kHz)
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"x90.0 60.06 800 840 928 1056 600 601 604 632 +hsync (56.9 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 +hsync +vsync (43.3 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"x120.0 52.40 640 680 744 848 480 481 484 515 +hsync (61.8 kHz)
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 +hsync (50.9 kHz)
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"x90.0 37.89 640 672 736 832 480 481 484 506 +hsync (45.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0 19.68 512 528 576 632 384 384 385 416 (31.1 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(**) fglrx(0): Display dimensions: (338, 270) mm
(WW) fglrx(0): Probed monitor is 320x240 mm, using Displaysize 338x270 mm
(**) fglrx(0): DPI set to (96, 96)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): *Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 (68.7 kHz)
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"x43.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace (35.5 kHz)
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"x85.0 56.25 800 832 896 1048 600 601 604 631 (53.7 kHz)
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"x100.0 68.17 800 848 936 1072 600 601 604 636 +hsync (63.6 kHz)
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"x90.0 60.06 800 840 928 1056 600 601 604 632 +hsync (56.9 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 +hsync +vsync (43.3 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"x120.0 52.40 640 680 744 848 480 481 484 515 +hsync (61.8 kHz)
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 +hsync (50.9 kHz)
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"x90.0 37.89 640 672 736 832 480 481 484 506 +hsync (45.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0 19.68 512 528 576 632 384 384 385 416 (31.1 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000001f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 255 MB
(II) fglrx(0): [pcie] 261120 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[7] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[8] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[9] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[10] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[11] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[12] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[13] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] 0 0 0x00009c00 - 0x00009cff (0x100) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[23] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[24] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[25] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[26] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[27] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[28] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[29] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[30] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[31] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[32] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[33] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[34] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[35] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[36] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[37] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[38] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.2.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0xac000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.49.7
(II) fglrx(0): Date: May 12 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xab000 at 0xb7653000
(II) fglrx(0): [drm] Closed DRM master.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x10000000
(==) fglrx(0): Write-combining range (0xd0000000,0x10000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 7167
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(EE) fglrx(0): XMM failed to open CMMQS connection.
(II) fglrx(0): XMM failed to initialize!
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "abnt2"
(**) Keyboard0: XkbModel: "abnt2"
(**) Option "XkbLayout" "br"
(**) Keyboard0: XkbLayout: "br"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) PS/2 Mouse: Device: "/dev/psaux"
(**) PS/2 Mouse: Protocol: "auto"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Option "Emulate3Timeout" "70"
(**) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 70
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) PS/2 Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
Last edited by DarkForte (2008-06-23 22:40:05)From your Xorg.0.log:
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.49.7
(II) fglrx(0): Date: May 12 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
You have to quit X, then rmmod and modprobe the kernel module - you're still using the old one. (a reboot would technically fix it too)
# rmmod fglrx
# modprobe fglrx
# dmesg | tail
The dmesg output should say you've successfully loaded the 8.501 driver. -
[SLOVED] All my USB not work after upgrade system.
Hello all,
I'm new in Arch, and i install my system with your LiveCD (2005).
In the first boot, all work good. But after upgrade (pacman -Syu), all my USB device (Keyboard, Mouse) not work.
I'm not using (yet) with Xorg, just in command shell (tty1), But i can't press anything cuz my keyboard not work.
I try to do that (https://bbs.archlinux.org/viewtopic.php … 19#p906119), but no work to me too.
What i can to do to fix this?
My dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf564000 (usable)
BIOS-e820: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
BIOS-e820: 00000000bf5bb000 - 00000000bf5db000 (reserved)
BIOS-e820: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
BIOS-e820: 00000000bf5ec000 - 00000000bf600000 (reserved)
BIOS-e820: 00000000bf600000 - 00000000bf602000 (usable)
BIOS-e820: 00000000bf602000 - 00000000bf603000 (ACPI data)
BIOS-e820: 00000000bf603000 - 00000000bf60b000 (reserved)
BIOS-e820: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
BIOS-e820: 00000000bf615000 - 00000000bf63e000 (reserved)
BIOS-e820: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
BIOS-e820: 00000000bf681000 - 00000000bf800000 (usable)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x23f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 23F800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009ec00 (usable)
modified: 000000000009ec00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf564000 (usable)
modified: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
modified: 00000000bf5bb000 - 00000000bf5db000 (reserved)
modified: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
modified: 00000000bf5ec000 - 00000000bf600000 (reserved)
modified: 00000000bf600000 - 00000000bf602000 (usable)
modified: 00000000bf602000 - 00000000bf603000 (ACPI data)
modified: 00000000bf603000 - 00000000bf60b000 (reserved)
modified: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
modified: 00000000bf615000 - 00000000bf63e000 (reserved)
modified: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
modified: 00000000bf681000 - 00000000bf800000 (usable)
modified: 00000000fed1c000 - 00000000fed20000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 000000023f800000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fcda0] fcda0
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 16000-1a000
init_memory_mapping: 0000000100000000-000000023f800000
0100000000 - 023f800000 page 2M
kernel direct mapping tables up to 23f800000 @ 18000-22000
RAMDISK: 37c44000 - 37e19ab8
ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
ACPI: XSDT 00000000bf5ae068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bf5b7ba0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bf5ae140 09A5C (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bf60cf80 00040
ACPI: APIC 00000000bf5b7c98 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bf5b7d10 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bf5b7e18 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000bf5b7e58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
(13 early reservations) ==> bootmem [0000000000 - 023f800000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 00016d7b38] TEXT DATA BSS ==> [0001000000 - 00016d7b38]
#2 [0037c44000 - 0037e19ab8] RAMDISK ==> [0037c44000 - 0037e19ab8]
#3 [00016d8000 - 00016d826b] BRK ==> [00016d8000 - 00016d826b]
#4 [00000fcdb0 - 0000100000] BIOS reserved ==> [00000fcdb0 - 0000100000]
#5 [00000fcda0 - 00000fcdb0] MP-table mpf ==> [00000fcda0 - 00000fcdb0]
#6 [000009ec00 - 00000fca90] BIOS reserved ==> [000009ec00 - 00000fca90]
#7 [00000fcd24 - 00000fcda0] BIOS reserved ==> [00000fcd24 - 00000fcda0]
#8 [00000fca90 - 00000fcd24] MP-table mpc ==> [00000fca90 - 00000fcd24]
#9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
#10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
#11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
#12 [0000018000 - 000001d000] PGTABLE ==> [0000018000 - 000001d000]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023f800
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bf564
0: 0x000bf600 -> 0x000bf602
0: 0x000bf681 -> 0x000bf800
0: 0x00100000 -> 0x0023f800
On node 0 totalpages: 2092659
DMA zone: 56 pages used for memmap
DMA zone: 110 pages reserved
DMA zone: 3816 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765725 pages, LIFO batch:31
Normal zone: 17892 pages used for memmap
Normal zone: 1290780 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf564000 - 00000000bf5bb000
PM: Registered nosave memory: 00000000bf5bb000 - 00000000bf5db000
PM: Registered nosave memory: 00000000bf5db000 - 00000000bf5ec000
PM: Registered nosave memory: 00000000bf5ec000 - 00000000bf600000
PM: Registered nosave memory: 00000000bf602000 - 00000000bf603000
PM: Registered nosave memory: 00000000bf603000 - 00000000bf60b000
PM: Registered nosave memory: 00000000bf60b000 - 00000000bf615000
PM: Registered nosave memory: 00000000bf615000 - 00000000bf63e000
PM: Registered nosave memory: 00000000bf63e000 - 00000000bf681000
PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880008a00000 s89176 r8192 d21416 u524288
pcpu-alloc: s89176 r8192 d21416 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060321
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8167004k/9428992k available (3449k kernel code, 1058356k absent, 202696k reserved, 1818k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3311.105 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.13 BogoMIPS (lpj=11037016)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
Booting Node 0, Processors #1
CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#2
CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#3 Ok.
CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
Brought up 4 CPUs
Total of 4 processors activated (26499.22 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20091214/nsinit-340)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfe707000-0xfe70700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xfe706000-0xfe7063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfe705000-0xfe7053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: reg 10: [mem 0xfe704000-0xfe7040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 24: [io 0xf020-0xf02f]
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:03:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:03:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:03:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:03:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:03:00.0: reg 30: [mem 0xfe500000-0xfe50ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:05:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0x0400-0x0453] has been reserved
system 00:0b: [io 0x0458-0x047f] has been reserved
system 00:0b: [io 0x0500-0x057f] has been reserved
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [io 0x0454-0x0457] has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [mem disabled]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem disabled]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io disabled]
pci 0000:06:00.0: bridge window [mem disabled]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 06-07]
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem disabled]
pci 0000:00:1c.7: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:06:00.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 3 [io 0x0000-0xffff]
pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:07: resource 6 [io 0x0000-0xffff]
pci_bus 0000:07: resource 7 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1878k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000979e000 - ffff88000d79e000
software IO TLB at phys 0x979e000 - 0xd79e000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1304838033.699:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15956
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 28 for MSI/MSI-X
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 20
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 20
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 20
pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:03:00.0: setting latency timer to 64
pata_acpi 0000:03:00.0: PCI INT A disabled
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-6: WDC WD1200JD-00GBB0, 02.05D02, max UDMA/100
ata1.01: 234441648 sectors, multi 16: LBA48
ata1.01: applying bridge limits
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA WDC WD1200JD-00G 02.0 PQ: 0 ANSI: 5
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max MWDMA2
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: limiting SATA link speed to 1.5 Gbps
ata2.00: limiting speed to MWDMA2:PIO3
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: disabled
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2: EH complete
pata_via 0000:03:00.0: version 0.3.4
pata_via 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_via 0000:03:00.0: setting latency timer to 64
scsi4 : pata_via
scsi5 : pata_via
ata5: PATA max UDMA/133 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 16
ata6: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 16
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb2 sdb3 sdb4 < sdb5 >
sda: sda1 sda2
sd 0:0:1:0: [sdb] Attached SCSI disk
sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sdb5): mounted filesystem with ordered data mode
<30>udev[901]: starting version 167
Adding 7030776k swap on /dev/sdb2. Priority:-1 extents:1 across:7030776k
Thanks a lots.
Last edited by KingYes (2011-05-08 11:03:55)FYI, the latest installation CD version is "2010.05". It's best to use the latest. Get it from http://www.archlinux.org/download/
I'm not sure but I believe all other LiveCDs are custom made outside of the official Archlinux development team.
I recommend downloading the CD I mentioned and follow this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide
I've installed arch many times on different hardware and the only time I lost mouse and keyboard was after I removed "10-evdev.conf" and "10-quirks.conf" from /etc/X11/xorg.conf.d/. I copied both back from backups, rebooted and m&k were functional again. My guess is "10-evdev.conf" was the file I needed. Check both these files exist. -
[SOLVED] Suspend to ram / disk not working in newer kernels
Hi all,
this puzzles me for a while:
My desktop system was able to suspend to ram / disk flawlessly in older kernels. It stopped working with 3.3. The suspend seems to work, the machine goes to standby. But when I try to resume, the machines is on but the screen stays black. Neither the console is working nor can I ssh into it. Only hard reset gets me out here
I did investigate and found many tips and hints which all led to nowhere. I even changed my filesystem back from btrfs to ext4 and my VGA module from proprietary nvidia to nouveau.
When this all failed I got to the idea to burn several install disks. One of the official 2011.08.19 (kernel 3.0.3) and one of the snapshots 2012.06.05_04-00-01 (kernel 3.3.7) and 2012.07.17_04-00-01 (kernel 3.4.4). I guess these can not be compromised by some hosed installation. I started one by one and issued the follwing command:
echo mem > /sys/power/state
which suspends the machine successfully in all three cases. With 2011.08.19 the resume is working but the other two fail. Some more info about the hardware:
1. lspci output
harvey@obelix ~ $ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 3 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.3 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
2. lsmod output of 2012.07.17_04-00-01:
harvey@obelix ~ $ lsmod
Module Size Used by
fuse 68768 0
tun 15297 0
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
btusb 11764 0
joydev 9991 0
bluetooth 190551 22 bnep,btusb,rfcomm
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
snd_hda_intel 24053 3
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
microcode 12185 0
i7core_edac 17477 0
snd_hwdep 6300 1 snd_hda_codec
i2c_i801 8180 0
iTCO_wdt 12813 0
snd_pcm 74958 2 snd_hda_codec,snd_hda_intel
r8169 49386 0
coretemp 5654 0
edac_core 36656 3 i7core_edac
iTCO_vendor_support 1929 1 iTCO_wdt
serio_raw 4653 0
pcspkr 1899 0
snd_page_alloc 7185 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
mii 4123 1 r8169
snd 58997 12 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
acpi_cpufreq 5933 0
mperf 1235 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
usbhid 36430 1 hid_logitech
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
usb_storage 44760 0
pata_acpi 3408 0
ata_piix 23160 5
crc32c_intel 1987 0
ahci 20549 0
libahci 20023 1 ahci
ata_generic 3295 0
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
uhci_hcd 23372 0
xhci_hcd 81440 0
ehci_hcd 40994 0
usbcore 147533 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784289 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64288 1 nouveau
drm 208926 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
ext4 424175 4
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
3. /var/log/pm-suspend.log of a not working suspend
Initial commandline parameters:
Tue Jul 17 11:21:18 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux obelix 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
ext4 424175 3
jbd2 73919 1 ext4
mbcache 5977 1 ext4
btusb 11764 0
bluetooth 190551 22 bnep,btusb,rfcomm
crc16 1359 2 ext4,bluetooth
joydev 9991 0
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
microcode 12185 0
coretemp 5654 0
serio_raw 4653 0
snd_hda_intel 24053 5
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
pcspkr 1899 0
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 3 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
r8169 49386 0
i7core_edac 17477 0
snd_timer 18966 1 snd_pcm
edac_core 36656 3 i7core_edac
mii 4123 1 r8169
snd 58997 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
iTCO_wdt 12813 0
i2c_i801 8180 0
soundcore 5410 1 snd
iTCO_vendor_support 1929 1 iTCO_wdt
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
btrfs 710578 1
libcrc32c 1002 1 btrfs
zlib_deflate 20436 1 btrfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
usbhid 36430 1 hid_logitech
usb_storage 44760 0
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
pata_acpi 3408 0
ata_piix 23160 5
ata_generic 3295 0
uhci_hcd 23404 0
crc32c_intel 1987 1
ahci 20549 0
libahci 20023 1 ahci
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
xhci_hcd 81472 0
ehci_hcd 41026 0
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784321 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64320 1 nouveau
drm 208958 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
total used free shared buffers cached
Mem: 8173500 884060 7289440 0 3764 405872
-/+ buffers/cache: 474424 7699076
Swap: 8386556 0 8386556
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Tue Jul 17 11:21:18 CEST 2012: performing suspend
This seems to be a kernel bug. Any input?
Harvey
Last edited by Harey (2012-08-06 13:51:49)Another life-sign. The issue is still unsolved but I've come a little further. It seems to be a combination of more failures. The first one is USB hardware. I have a usb keyboard-mouse combo from Logitech (comfort cordless desktop). The USB bus does not wake up correctly when resuming from suspend. So my keyboard is unsuable. I put in a file /etc/pm/sleep.d/20_custom-ehci_hcd with the following content:
BUSES="0000:00:1a.7 0000:00:1d.7"
case "${1}" in
hibernate|suspend)
# Switch USB buses off
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/unbind
done
resume|thaw)
# Switch USB buses back on
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/bind
done
esac
The bus IDs were taken from /sys/bus/pci/drivers/ehci_hcd
When I start pm-suspend from a console (no X started) this seems to reanimate my keyboard while the screen stays black (with backlight on). I can type and reboot. Also I can ssh into the machine from my laptop.
Concerning the blank screen there seems to be a bug in both the proprietary nvidia modules as well as the nouveau driver. The nvidia folks have issued a new beta driver which seems to at least minimize the failures. This all concerns the nv50-family of nvidias cards. I have a GF8600GT which is one of these
I'll wait for this driver and then restart my testing. Until then - no suspend/hibernate
EDIT: Today's nvidia 304.32 is solving my issues - I can sleep again
Harvey
Last edited by Harey (2012-08-06 13:52:51) -
Suspend2ram via pm-utils in gnome not working
Hello Everyone,
I am new to Arch, and all signs indicate that it is finally my long-after-searched distro. Specifically, I switched from a very short dip into gentoo (gnome compilation...) and now really like arch docs and experience so far.
I managed easily to get through installation, helped by the excellent docs. After getting gnome to work, I now want to enable suspend to ram and suspend to disk. Suspend to ram (from gnome power applet) does not work, it blanks my screen, computer still runs normally and I can not get gnome back. Always need to do a hard reset.
I installed pm-utils, acpi, gnome-extra etc. as pointed out on the pm-utils and gnome wiki.
I understood that gnome uses hal for suspend by default, so this is a starting point I guess. The output of suspend in /var/log/pm-suspend.log is not helpful, since all hooks are run and it reads "performing suspend"
Thu Jan 27 21:34:52 CET 2011: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux anvil 2.6.36-ARCH #1 SMP PREEMPT Mon Jan 24 18:34:55 UTC 2011 i686 AMD Athlon(tm) AuthenticAMD GNU/Linux
Module Size Used by
ipv6 244945 10
ext2 55656 1
snd_seq_dummy 1079 0
usbhid 32169 0
hid 60432 1 usbhid
radeon 814837 2
snd_seq_oss 25040 0
snd_seq_midi_event 4528 1 snd_seq_oss
snd_intel8x0 22230 0
snd_seq 41688 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_wavefront 28237 0
ttm 43438 1 radeon
snd_cs4236 21996 0
snd_ac97_codec 87943 1 snd_intel8x0
drm_kms_helper 23055 1 radeon
snd_wss_lib 17822 2 snd_wavefront,snd_cs4236
snd_pcm_oss 33694 0
snd_opl3_lib 7266 2 snd_wavefront,snd_cs4236
drm 142807 4 radeon,ttm,drm_kms_helper
snd_hwdep 4764 2 snd_wavefront,snd_opl3_lib
snd_mixer_oss 14654 1 snd_pcm_oss
ac97_bus 762 1 snd_ac97_codec
analog 7715 0
lp 6652 0
snd_mpu401 3800 0
snd_mpu401_uart 4927 3 snd_wavefront,snd_cs4236,snd_mpu401
snd_pcm 59136 5 snd_intel8x0,snd_cs4236,snd_ac97_codec,snd_wss_lib,snd_pcm_oss
i2c_algo_bit 4183 1 radeon
snd_rawmidi 15288 2 snd_wavefront,snd_mpu401_uart
ohci_hcd 19051 0
usblp 9636 0
ppdev 4862 0
snd_timer 15583 4 snd_seq,snd_wss_lib,snd_opl3_lib,snd_pcm
parport_pc 27832 1
ehci_hcd 32908 0
snd_seq_device 4369 5 snd_seq_dummy,snd_seq_oss,snd_seq,snd_opl3_lib,snd_rawmidi
i2c_nforce2 4408 0
ns558 2007 0
usbcore 115866 5 usbhid,ohci_hcd,usblp,ehci_hcd
snd 43219 17 snd_seq_oss,snd_intel8x0,snd_seq,snd_wavefront,snd_cs4236,snd_ac97_codec,snd_wss_lib,snd_pcm_oss,snd_opl3_lib,snd_hwdep,snd_mixer_oss,snd_mpu401,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_timer,snd_seq_device
gameport 6917 3 analog,ns558
parport 25499 3 lp,ppdev,parport_pc
nvidia_agp 4112 1
i2c_core 15762 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_nforce2
tpm_tis 6132 0
fuse 56816 3
processor 22776 0
sg 21028 0
button 3746 0
shpchp 23037 0
forcedeth 47178 0
soundcore 4929 1 snd
tpm 9505 1 tpm_tis
evdev 6692 7
thermal 9690 0
agpgart 22816 3 ttm,drm,nvidia_agp
pci_hotplug 21523 1 shpchp
snd_page_alloc 5981 3 snd_intel8x0,snd_wss_lib,snd_pcm
pcspkr 1359 0
tpm_bios 4661 1 tpm
ext4 288261 2
mbcache 4298 2 ext2,ext4
jbd2 58404 1 ext4
crc16 1053 1 ext4
sd_mod 24384 5
sr_mod 13217 0
cdrom 31378 1 sr_mod
pata_acpi 2308 0
pata_amd 7988 4
libata 140436 2 pata_acpi,pata_amd
scsi_mod 106955 4 sg,sd_mod,sr_mod,libata
floppy 48264 0
total used free shared buffers cached
Mem: 769776 247124 522652 0 27036 92212
-/+ buffers/cache: 127876 641900
Swap: 1052252 0 1052252
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Thu Jan 27 21:34:52 CET 2011: performing suspend
Any ideas or hints on this?
Thanks in advance
edit: After some time trying to get it to run with UPower, HAL and User Permission Method, I will end my attempts before I get mad. Fortunately, this machine was set up just to play with arch, and that was really fun. The stinging itch remains: If I could just pin down the error with debugging...
Last edited by phaebz (2011-01-27 21:48:33)Thanks for your reply MadTux!
I have a radeon 7500 with RV200 QW VGA controller.
I use the open driver xf86-video-ati.
I tried both the proprietary and the open driver. To no avail.
One thing though: Through experimenting with both, pc now suspends (drives and cpu down). After resume, drives and cpu start up again, but screen remains black - no control.
I read on the wiki somewhere about vbetool - tried it also with that installed...
I am lost
edit: Will try with KMS disabled...
Last edited by phaebz (2011-01-29 14:02:46) -
Nvidia is not working after upgrading nvidia driver and kernel
I upgraded nvidia driver and kernel. After rebooting graphic mode is not working. Here xorg.o.log
[ 281.180]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 281.181]
X.Org X Server 1.10.0.902 (1.10.1 RC 2)
Release Date: 2011-04-08
[ 281.181] X Protocol Version 11, Revision 0
[ 281.181] Build Operating System: Linux 2.6.38-ARCH i686
[ 281.181] Current Operating System: Linux localhost 2.6.38-ARCH #1 SMP PREEMPT Wed Mar 30 07:14:27 UTC 2011 i686
[ 281.181] Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/disk/by-uuid/b766e332-2aad-4047-8562-567180150189 ro quiet
[ 281.182] Build Date: 11 April 2011 10:49:12AM
[ 281.182]
[ 281.182] Current version of pixman: 0.20.2
[ 281.182] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 281.182] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 281.183] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 14 17:11:37 2011
[ 281.183] (==) Using config file: "/etc/X11/xorg.conf"
[ 281.183] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 281.183] (==) ServerLayout "Layout0"
[ 281.183] (**) |-->Screen "Screen0" (0)
[ 281.183] (**) | |-->Monitor "Monitor0"
[ 281.184] (**) | |-->Device "Videocard0"
[ 281.184] (**) |-->Input Device "Keyboard0"
[ 281.184] (**) |-->Input Device "Mouse0"
[ 281.184] (**) Option "Xinerama" "0"
[ 281.184] (==) Automatically adding devices
[ 281.184] (==) Automatically enabling devices
[ 281.184] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 281.184] Entry deleted from font path.
[ 281.184] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 281.184] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 281.184] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 281.184] (WW) Disabling Keyboard0
[ 281.184] (WW) Disabling Mouse0
[ 281.184] (II) Loader magic: 0x822e120
[ 281.184] (II) Module ABI versions:
[ 281.184] X.Org ANSI C Emulation: 0.4
[ 281.184] X.Org Video Driver: 10.0
[ 281.184] X.Org XInput driver : 12.2
[ 281.184] X.Org Server Extension : 5.0
[ 281.185] (--) PCI:*(0:1:0:0) 10de:0322:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xe8000000/134217728, BIOS @ 0x????????/131072
[ 281.185] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 281.185] (II) LoadModule: "extmod"
[ 281.185] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 281.185] (II) Module extmod: vendor="X.Org Foundation"
[ 281.185] compiled for 1.10.0.902, module version = 1.0.0
[ 281.185] Module class: X.Org Server Extension
[ 281.185] ABI class: X.Org Server Extension, version 5.0
[ 281.185] (II) Loading extension MIT-SCREEN-SAVER
[ 281.185] (II) Loading extension XFree86-VidModeExtension
[ 281.185] (II) Loading extension XFree86-DGA
[ 281.185] (II) Loading extension DPMS
[ 281.185] (II) Loading extension XVideo
[ 281.185] (II) Loading extension XVideo-MotionCompensation
[ 281.185] (II) Loading extension X-Resource
[ 281.185] (II) LoadModule: "dbe"
[ 281.185] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 281.185] (II) Module dbe: vendor="X.Org Foundation"
[ 281.185] compiled for 1.10.0.902, module version = 1.0.0
[ 281.185] Module class: X.Org Server Extension
[ 281.185] ABI class: X.Org Server Extension, version 5.0
[ 281.185] (II) Loading extension DOUBLE-BUFFER
[ 281.185] (II) LoadModule: "glx"
[ 281.186] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 281.216] (II) Module glx: vendor="NVIDIA Corporation"
[ 281.217] compiled for 4.0.2, module version = 1.0.0
[ 281.217] Module class: X.Org Server Extension
[ 281.217] (II) NVIDIA GLX Module 173.14.28 Wed Sep 29 10:17:05 PDT 2010
[ 281.217] (II) Loading extension GLX
[ 281.217] (II) LoadModule: "record"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 281.217] (II) Module record: vendor="X.Org Foundation"
[ 281.217] compiled for 1.10.0.902, module version = 1.13.0
[ 281.217] Module class: X.Org Server Extension
[ 281.217] ABI class: X.Org Server Extension, version 5.0
[ 281.217] (II) Loading extension RECORD
[ 281.217] (II) LoadModule: "dri"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 281.217] (II) Module dri: vendor="X.Org Foundation"
[ 281.217] compiled for 1.10.0.902, module version = 1.0.0
[ 281.217] ABI class: X.Org Server Extension, version 5.0
[ 281.217] (II) Loading extension XFree86-DRI
[ 281.217] (II) LoadModule: "dri2"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 281.218] (II) Module dri2: vendor="X.Org Foundation"
[ 281.218] compiled for 1.10.0.902, module version = 1.2.0
[ 281.218] ABI class: X.Org Server Extension, version 5.0
[ 281.218] (II) Loading extension DRI2
[ 281.218] (II) LoadModule: "nvidia"
[ 281.218] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 281.218] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 281.218] compiled for 4.0.2, module version = 1.0.0
[ 281.218] Module class: X.Org Video Driver
[ 281.218] ================ WARNING WARNING WARNING WARNING ================
[ 281.219] This server has a video driver ABI version of 10.0 that is not
supported by this NVIDIA driver. Please check
http://www.nvidia.com/ for driver updates or downgrade to an X
server with a supported driver ABI.
[ 281.219] =================================================================
[ 281.219] (II) NVIDIA dlloader X Driver 173.14.28 Wed Sep 29 09:55:18 PDT 2010
[ 281.219] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 281.219] (--) using VT number 7
[ 281.222] (II) Loading sub module "fb"
[ 281.222] (II) LoadModule: "fb"
[ 281.222] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 281.222] (II) Module fb: vendor="X.Org Foundation"
[ 281.222] compiled for 1.10.0.902, module version = 1.0.0
[ 281.222] ABI class: X.Org ANSI C Emulation, version 0.4
[ 281.222] (II) Loading sub module "wfb"
[ 281.222] (II) LoadModule: "wfb"
[ 281.222] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 281.223] (II) Module wfb: vendor="X.Org Foundation"
[ 281.223] compiled for 1.10.0.902, module version = 1.0.0
[ 281.223] ABI class: X.Org ANSI C Emulation, version 0.4
[ 281.223] (II) Loading sub module "ramdac"
[ 281.223] (II) LoadModule: "ramdac"
[ 281.223] (II) Module "ramdac" already built-in
[ 281.223] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 281.226] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 281.226] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 281.226] (II) UnloadModule: "nvidia"
[ 281.226] (II) Unloading nvidia
[ 281.226] (II) UnloadModule: "wfb"
[ 281.226] (II) Unloading wfb
[ 281.226] (II) UnloadModule: "fb"
[ 281.226] (II) Unloading fb
[ 281.226] (EE) Screen(s) found, but none have a usable configuration.
[ 281.226]
Fatal server error:
[ 281.226] no screens found
[ 281.226]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 281.226] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 281.226]bilgee0629 wrote:
Arjann wrote:
I think the new xorg-server is the problem as it isn't supported by this nvidia driver yet.
You could try to install the nouveau driver until nvidia comes with a new version of the 173 branch that supports xorg-server 1.10, see: https://wiki.archlinux.org/index.php/Nouveau for information. As lower-grade options, you might also consider xf86-video-nv and xf86-video-vesa.
Should i uninstall nvidia driver, then install it?
I think thats the easy way yes, else you have to blacklist the nvidia kernel module.. check the wiki link of nouveau for details. -
Java Plugin not working with firefox 3.o.13 and linux.
this is my ln -s to the plugin at /usr/lib/mozilla/plugins
libjavaplugin_oji.so -> /usr/local/jdk1.6.0_16/jre/plugin/i386/ns7/libjavaplugin_oji.so
Any ideas why java is not working?
Here's the ln -s again:
#pwd
#/usr/lib/mozilla/plugins
# ls -l
lrwxrwxrwx 1 root root 63 Sep 28 20:41 libjavaplugin_oji.so -> /usr/local/jdk1.6.0_16/jre/plugin/i386/ns7/libjavaplugin_oji.so
Here are my java stats:
# java -version
java version "1.6.0_16"
Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
Java HotSpot(TM) Client VM (build 14.2-b01, mixed mode, sharing)
Firefox 3.0.13:
Mozilla/5.0 (X11; U; Linux i686;
Gentoo Linux:
# uname -a
Linux tma 2.6.30-gentoo-r5 #10 SMP Sun Sep 20 21:52:19 PDT 2009 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux
I installed java from a jdk*.sh file and set the class path in /etc/bash/bashrc (not that it matters.
The appletviewer does work.solved: I knew you all knew I could figure this out.
#cp -R /usr/lib/mozilla/plugin/ /usr/lib/firefox-mozilla/
asuming this is true:
tma plugins # pwd
/usr/lib/mozilla/plugins
tma plugins # ls -l
total 4
lrwxrwxrwx 1 root root 63 Sep 28 20:41 libjavaplugin_oji.so -> /usr/local/jdk1.6.0_16/jre/plugin/i386/ns7/libjavaplugin_oji.so
tma plugins # -
Wifi with stock kernel driver rtl8192ce not working consistently
Hi,
My wifi card RTL8188CE does not work consistently with kernel driver rlt8192ce. The problem that i observe is that after some time ~1hr wifi devices get disconnected and are not able to reconnect. On restarting wifi using systemctl restart hostapd sometimes the system hangs.
Here are the outputs.
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
Subsystem: ASUSTeK Computer Inc. Device 84b5
Kernel driver in use: rtl8192ce
Kernel modules: rtl8192ce
Logs
Jan 22 19:30:56 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:56 Blitz-4 kernel: [color=red]rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)[/color]
Jan 22 19:30:56 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:56 Blitz-4 kernel: rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)
Jan 22 19:30:56 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:58 Blitz-4 kernel: BUG: unable to handle kernel paging request at 000060240000801d
Jan 22 19:30:58 Blitz-4 kernel: IP: [<ffffffff811b29a6>] __kmalloc+0x86/0x1c0
Jan 22 19:30:58 Blitz-4 kernel: PGD 0
Jan 22 19:30:58 Blitz-4 kernel: Oops: 0000 [#1] PREEMPT SMP
Jan 22 19:30:58 Blitz-4 kernel: Modules linked in: nls_iso8859_1 nls_cp437 vfat fat ctr ccm fuse bridge stp llc snd_hda_codec_hdmi arc4 mousedev hid_generic coretemp hwmon ppdev intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel rtl8192ce rtl_pci rtl8192c_common rtlwifi kvm mac80211 crct10dif_pclmul crc32_pclmul evdev crc32c_intel mac_hid uas ghash_clmulni_intel usb_storage usbhid cfg80211 hid snd_hda_codec_realtek snd_hda_codec_generic i915 aesni_intel iTCO_wdt iTCO_vendor_support aes_x86_64 lrw snd_hda_intel gf128mul drm_kms_helper rfkill snd_hda_controller glue_helper ablk_helper psmouse drm snd_hda_codec cryptd pcspkr serio_raw snd_hwdep intel_gtt snd_pcm i2c_i801 r8168(O) i2c_algo_bit i2c_core snd_timer parport_pc tpm_infineon snd fan thermal tpm_tis parport mei_me tpm soundcore battery mei video shpchp
Jan 22 19:30:58 Blitz-4 kernel: button lpc_ich processor sch_fq_codel ext4 crc16 mbcache jbd2 sd_mod atkbd libps2 ahci libahci libata xhci_pci ehci_pci xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio
Jan 22 19:30:58 Blitz-4 kernel:CPU: 3 PID: 1238 Comm: Cache2 I/O Tainted: G O 3.18.2-2-ARCH #1
Please suggest any workaround/modules.Same problem to me. lspci output:
07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
and logs:
Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
A bug report submitted to redhat bugzilla https://bugzilla.redhat.com/show_bug.cg … id=1203241 suggests it may be caused by a bug in the rtl8192ce kernel module since linux 3.17.7. I hope this problem could be solved as quickly as possible.
Last edited by mike_nzk (2015-04-04 08:33:59) -
The battery of my macbook pro is not working
my battery is not working, just an "X" on the battery signal...
it dosent charge, and it makes the fan work really hardWhich model MacBook Pro do you have (e.g., "15-inch Late 2011")?
Hold down the option key and go under the Apple menu and select "System Information..." Under "Hardware">"Power">Battery Information," copy and paste the text therein. It will look something like this:
Battery Information:
Model Information:
Serial Number: D8620260152DGDLAF
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 406
Hardware Revision: 2
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 6342
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 6370
Health Information:
Cycle Count: 165
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1
Voltage (mV): 12496
You may show that a battery is not installed.
Clinton -
Download to Excel Not working in Mozilla Firefox
Hi Friends
I have wriiten code for downloading data as a Excel file from a webdynpro application using the below methodology.
ht[http://wiki.sdn.sap.com/wiki/display/WDABAP/Downloadafileintoexcelsheet|http://wiki.sdn.sap.com/wiki/display/WDABAP/Downloadafileintoexcelsheet]
It works fine in Internet Explorer 7.0. Its not working in Mozilla Firefox 3.6. Our current SAP Version is ECC 6.0 EHP4 (NW7.01).
Please provide some insight into the issue.
Thanks a lot.
Regards
RakeshHi Rakesh
Please check the browser compatibility in Product availability Matrix in service market place for your server version.
Loging with SMP userid and password at http://service.sap.com/pam
Best Regards
Srinivas -
Strobe Media Playback 1.6.328 not working in Firefox
Hi All,
latest version of SMP 1.6.328 works fine in Chrome, Safari & Explorer however in Firefox the player does not appear.
I am re-skinning the player via xml and using RTMP dynamic video stream source via f4m file.
All browsers are upto date and all have the latest Flashplayer versions installed.
If I fall back to SMP version 1.6.274 everything works fine!
Another thing I found was that the advertisment demo did not work when using Flashplayer 11 although again, it does when using an older version.
Any ideas?
Many thanks
NorfolkSignmanHi,
Yes.the versions 11.1.1.6 and 11.1.1.6.8 pivot table and table prompts are not working in Firefox.
Bug 14781767 - QA: PROMPTS: RUNTIME PROMPTS IS NOT WORKING IN FIREFOX 16 has been fixed in the latest release of OBIEE 11.1.1.6.8
and the latest version 11.1.1.7.0 is working fine with pivot table and table prompts in Mozilla Firefox..
Please mark if it correct/helpful
Maybe you are looking for
-
WEBUTIL_FILE_TRANSFER.URL_To_Client unable to transfer desired file from DB
Hi all, I need to transfer files from DB server to web client using WEBUTIL_FILE_TRANSFER.URL_To_Client, the problem is whenever i try to transfer i get base.htm file contents into the requested file. i.e. i do not get the desired file transfered int
-
HT1338 keyboard not working please help macbook pro
my keyboard on my macbook pro is not working and when i type a letter it types a different thing and some of the letters are not respounding please help with issue thank you
-
Hi, We are seeing a lot of errors on: 1. Microsoft-SharePoint Products-Web Content Management Description: An error occurred in the blob cache. The exception message was 'The system cannot find the file specified'. (Exception from HRESULT: 0x8070002)
-
X120e Weak Wireless Signal (Any Suggestions?)
I Just got my x120e yesterday and love it. The only problem I am having is with the wireless card. The dravers are up to date and it is connecting to a netgear wireless-n router. It is set to broadcast wireless-n only. Tried changing the broadcast ch
-
Please if you can help tell me what i have done wrong and how to fix it because i am getting a cannot resolve symbol error. public class loop public static void main(String[] args) System.out.println("What would you like to cut?"); System.o