Aggregate with fixed value for 0SOLD_TO__0REGION wonu00B4t work

Hi,
We want to have a aggregate for a specific region. I have problem getting the aggregate to work. When testing it for aggregates in tc rsrt, it states that it will not use the aggregate because of Characteristic/Attribute 0SOLD_TO__0REGION does not have aggregation level */%.
This in spite of the fact that 0SOLD_TO__0REGION is filtred to only include the same region and country in the aggregate and in the query.
Maybe the message with the * in the end of it means that the aggregate needs to have all regions (value * in aggregate instead of F), but if that is the case, why?
BR,
Niclas
Edited by: Niclas Erlandsson on Jul 22, 2009 10:30 PM

Hi
1.Create separate aggragates for each Attribute, using fixed values and create a multiprovider over this cube and take the report.
Multiprovider perform parallel search on aggregates hence you query retrival time will be quick.
2.Create Hierarchy variable and hierarchy node variable in the properties of IO
in this case also you won't see entirer hierarchy. if you won't provide data for other nodes... it won't display.
set authorization on hierarchy node also helps
Hope this helps
Regards
CSM Reddy

Similar Messages

  • Aggregates with Fixed values

    HI
    We have a requirement to create an aggregate on one of our infocubes. Dical period is going to be included as part of this aggregate. I would like to know if it is possible to set this aggregate to be populated for a fixed range of periods eg: 008/2009 - 012/2009.
    I know that we can set this to one fixed date like 008/2009 but is a range of period possible? If so how can I do that.
    Thanks.

    Hi,
    To the best of my knowledge, it is not possible to give a range as a Fixed Value for Aggregate.
    However, I recommend to go for other possible options like partioning, compression, Indexing, OLAP Cache, DB Statistics etc to improve the performance of the query.
    Regards,
    Sekhar.

  • Fixed Values for Aggregates

    Hi, I'd like to know if anyone knows a way to have a range of fixed values for an aggregate?  I'd like to have the aggregate based on 0FISCYEAR 2003-2004.
    Any ideas, suggestions, workarounds?
    Thanks!

    Hi Kenneth,
    as it is not possible to have aggregates as you want, you can go with the following workaraound.
    Use Partinioning and use January 2003 to December 2004 as the partinioning parameters and use just 1 partition. With these settings you get 3 partitions for the cube. One for all data older than jan/03, one for all data younger than dec/04 and one for all data within your periods. For setting up the partitions the cube must be empty. Hope this helps
    regards
    Siggi

  • How to read the 'Input help with fixed values' of domain .

    How to read the 'Input help with fixed values' of domain .
    The domain has a Value range i want to read those values .
    Are these values stored in any table ?
    Plz help me i need it ver badly...
    Thanks in Advance...

    Hi Chandra Shekhar,
    To read the 'Input help with fixed values' of domain , you can use the function module : HR_P_GET_FIXED_VALUE_TEXT.
    iIf you enter the domain name, you will find the fixed values entered in the domain.
    These values are stored in a table DD07L(DD zero 7 L). Here the values are stored based on domain name.
    See if it works for you.
    Award points if its helpful.
    Regards,
    Bhanu

  • PriceSlider content item always having a fixed value for 'sliderMax' and 'sliderMax'

    Hi,
    I am using ATG-10.2
    I am trying to create the navigation with invoke assembler call (to contentCollection '/content/Shared/Guided Navigation') Everything goes well, except the price slider.
    sliderMin and sliderMax values are always having fixed values, even though there are products with higher prices than this range.
    Ex: This is how my content item looks like
    {enabled=true, @type=PriceSlider, name=Price, filterCrumb=com.endeca.infront.cartridge.model.RangeFilterBreadcrumb@d45e275, sliderMax=1500, sliderMin=0, priceProperty=sku.activePrice}
    But in this search result, there are product which have prices even beyond 10,000
    I hope that the properties I am accessing are correct (contentItem.sliderMin and contentItem.sliderMax).
    Does anyone has seen this before??
    Any solution to overcome this issue. ??
    NOTE: See the attached images here.
    https://qa.endecacommunity.com/questions/2429/priceslider-content-item-always-having-a-fixed-value-for-slidermax-and-sli…

    If you want to get better help post a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html].
    Most of the code you posted is not relevant to your question/problem.
    Also you shouldn't name a JTextArea object jDescrLabel ?
    That's confusing for someone else reading your code.
    Why not use jDescrTextArea ?

  • Hide domain fixed values for future use

    We have  a custom domain with 7 fixed values.These Fix values will display if we click on f4 help in the screen.I dont want 4th value and 5th value in the f4 search help button.whether it is possible to hide those values for future use. if we delete the fix values from the domain fixed value list..then it is effecting the past data.Please help me on this.

    Hi Prashanth,
    Use FM : DDIF_DOMA_GET  to get the fixed values for that domain in an internal table, then you can process that internal table according to your requirement and display only those values, in AT SELECTION_SCREEN ON VALUE_REQUEST event in the report.
    I hope it resolves your problem.
    Thanks,
    Avinash

  • Define Fixed Values for Texts

    Hello,
    Using customizing for text schema, it is possible to define fixed values for texts from SRM document.
    Nevertheless, when you define fixed values for a transaction type, field "Fixed Value for a Text" is a CHAR30 data type.
    Is there a way to add a customer field in order to use it in the drop-down list instead of the standard one ?
    Our aim is to have at header PO level a specific document text and to transmit it to R/3, but those texts can go to CHAR80.
    Previously, i tried to add my specific document text (using a specific search-help) into the text area (in this case, i don't have any fixed values) which is CONTAINER_LONGTEXT.
    But this field is an implementation class, and i don't know how to populate this area.
    Any suggestions are welcome.
    Regards.
    Laurent.

    Hi,
    I tried to update PO for its longtext (with standard function module) using obtained value with my search-help, but i did not succeed yet.
    Any ideas ?
    Regards.
    Laurent Burtaire

  • Hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

    hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

    Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
    http://www.apple.com/support/bootcamp/
    https://discussions.apple.com/community/windows_software/boot_camp

  • Issue with Negative Value for Total valuated stock 0VALSTCKQTY.

    Hi Experts,
    we loaded the Cube with datasources 2LIS_03_BX, 2LIS_03_BF and 2LIS_03_UM.
    We mapped the quanity field from 2LIS_03_BF in transformation either into Key figures "Quantity issued from valuated stock" (0ISSVALSTCK) or "Quantity received into valuated stock" (0RECVALSTCK ) of the cube.
    For obtaining the Total Valuated stock, we used the Key figure 0VALSTCKQTY. This key figure is having the Inflow and Out flow values as 0RECVALSTCK and 0ISSVALSTCK. When i tried to check the content of 0VALSTCKQTY, the key figure  0VALSTCKQTY is not present in the infoCube content. I understood that the value for this key figure would be calculated at the time of query execution with the formula
    { Last obtained Valuated stock + (Received Valuated Stock u2013 Issued Valuated Stock ) }.
    The issue is the first records in the query is obtained with negative value for the total valuated stock 0VALSTCKQTY even though the values of Received Valuated Stock  and  Issued Valuated Stock are with Zero.  Could any one please help me on how the first record in the query is with a negative value eventhough the inflow and out flow fields of it are with Zero.
    Many Thanks in advance.
    Jeswanth

    Hi Srini,
    I observed an interresting reason for the stock being with negative in the first record.
    Issue : While executing the BEx report, we have the first record with a negative value.
    Let me explain with an example
    Material  : XYZ
    Plant      : A
    Date of Stock Initialization for data source 2LIS_03_BX -
    >  12th April 2009.
    So on 12 Th April 2009 consider that we have a stock in store with a value of 2640.
    Then we have loaded wih Data source 2LIS_03_BF for all Historic Movement types.
    At the time of query execution we will have the first record with a negative of available stock present on the day of initialization .
    So, as we have initilized the data source 2LIS_03_BX on 12 th April 2009, we have at that time a stock of 2640 in availability.
    Exactly with the same value of 2640, we are having a negative value i.e. -2640.
    and also one more point to be noted is ...as we have initialized the data source 2LIS_03_BX on 12 th APril 2009...it has created a
    opening balance of 2640 on the day of initiailization i.e on 12 th April 2009 in infocube....(which is an extra record...)...so if the previous record of 12,04,2009 is having some value in it..then it will get added to 2640 EA..which will give incorrect stock
    So in the query the records will appear in the below following manner
    Calendar Day     Total stock                                                                Received stock                                          Issued Stock         
    28.12.2005 --->  - 2640 EA
    29.12.2005 --->    2000 EA                                                                       640 EA                                                        0
    10.04.2009 --->      0                                                                                0                                                               2000 EA      
    11.04.2009 -
    >    0                                                                                0                                                                0          
                                 (For making
                                  the earlier record of  initilization to 0  a negative value -2640 EA is created in the first record )
    12.04.2009 (Initializtion day) --->  2640 EA                                                 0                                                                0
    13.04.2009 
    the day before initialization the total stock will be 0 due to the negative effect introduced by the first record and from the day of initialization the records will be the accurate values...  On 12 th april 2009 we can see that a stock of 2640 is brought into the total stock. In fact if there is no negative value i.e. -2640 in the first record then ...the value on 11.04.2009 will be 2640 Ea and this will get summed up with the Opening balance of 2640 EA created by 2LIS_03_BX on the day of intitialization. So on 12 .04. 2009 the total stock will be shown as 5280 EA...so in order to prevent the double value only we observed that the first record is created with the negative of available stock present on the initialization ...to make the record before the day of initialization i.e. 11.04.2009...to be 0...so that from 12 th April 2009 ..will start to see the actual total stock in the query result...
    This is happening only if we use  both the data sources 2LIS_03_BX and 2LIS_03_BF  for loading into BW.....
    If we load alone by 2LIS_03_BF ...then as 2LIS_03_BX is ruled out in the loading...then no negative of available stock will be created ...because there will be bno opening balance created on the day of initialization.....and the opeing balance available will be flowing into consecutive records due to the movement types and 12 th April 2009 will be shown with avaialable total stock of 2640 EA.
    Kindly let us know your opinions on this...
    Thanks.
    regards,
    Jeswanth

  • Pro*C & SQLDA with NULL value for predicate column

    Hi: I am using a C program to update a table via a dynamic sql (method 4) and SQLDA. In the update statement predicate, I have place holders (as in TBLCOL=:C000). One of the columns in the predicate contains null values, so I set L[n] = 0, V[n] = pData (which pData[0] = '\0'), *(I[n]) = -1, and T[n] = 5 (for text). I cannot find the row that I know is there.
    I cannot change my statement to contain TBLCOL IS NULL, since I don't know ahead of time if I'm looking for rows with null values for this column. The Pro*C manual says that by setting the appropriate *(I[n]) = -1, it indicates to Oracle to simulate the "IS NULL" clause, and update the appropriate rows. In my case, I receive 1403 as SQLCODE when I use TBLCOL=:C000 vs TBLCOL IS NULL. What am I doing wrong? Thank you for your help.

    You should include these columns as well;
    ChangeType (see mxi_changetype)
    ValOwner (repository)
    UserID ("jobid=<>", usermskey, GUI (mmc), DG (dyngrp), reconcile)
    IdAudit  (This is the event task (add and del member for assignments)
    ParentAuditId (AuditID of parent which last updated the attribute, not consistent)
    ChangedBy (Holds the MSKEY of the user which last changed the attribute)
    ExpiryTime
    to make sure you get a fuller picture of the audit record.
    Your selection does not cover all events and descriptions
    br,
    Chris

  • How to hide RTPs and Specify Fix value for them

    Hi All,
    I created a business in which i am using one variable of String type with RTP enabled.
    Now i don't want my user to enter this value while executing business rule, instead i want to provide a fix/constant value for that variable. How can i do that.
    Basically my intention is to put that business rule inside a rule twice with 2 diff values

    Have you tried setting the variable as a member type, applying it against a dimension and then giving it a default value.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • CN41 report with out values for project dates

    Hi Experts
    The following field values are captured in Table PROJ.
    a. Finish Date PROJ-PLSEZ
    b. Forecast Start PROJ-SPROG
    c. Forecast Finish PROJ-EPROG
    But the report CN41/CN41N does not show values for these fields.
    Can anybody give clue to get this report with values for the above fields.
    Warm regards
    ramSiva

    HI,
    if you want the top  - of - page to be displayed
    even when we scroll down
    then use this
    try to give heading as text elements by giving some spaces
    TOP-OF-PAGE.
      PERFORM display_header.  RESERVE 10 LINES.
    form
      SET LEFT SCROLL-BOUNDARY COLUMN 84.
      FORMAT COLOR COL_BACKGROUND INTENSIFIED ON.
      WRITE:/01(252) text-h01 CENTERED.
      WRITE:/01(252) text-h06 CENTERED.
      SKIP.
    endform
    as it is working fine in my report
    reward points if helpful,
    regards,
    venkatesh

  • Table editor problem with default value for column

    Hi there,
    I'm trying to use SQL Developer 1.2.1 on Ubuntu 7.10 (though I don't think the OS is relevant) and I'm running into a snag when trying to update table structures. If you go to edit the table to say modify a column name, and that column has a default value set, SQL Developer is encapsulating the value with brackets and quotes. When trying to save the changes, it complains about the default value being 4 chars too many for the column width. An example of this would be a currency code column of varchar2 (3) set with EUR as the default. SQL Developer changes the value to ('EUR') hence the error.
    Is there anyway to prevent this from happening?
    Cheers,
    Chris

    Could you please be more specific? In 1.2.1.32.40 I
    added the column COL1 VARCHAR2(3) with default value
    'EUR'. The data display field refreshed to show the
    default value, so I edited it in a couple of entries
    and comitted the change without problem. Then I
    renamed the column from the "Edit table" popup menu.
    Finally, I renamed the column from the "Rename
    column" popup menu, no problem either.Ah, you are correct. That does work. What I was trying is select tablename in the object browser, then right click on it and select "Edit" from the contextual menu. You are then presented with edit table dialog box. If you then select a column in that box you will see a column properties box. In that section you can change the name, default value, datatype et cetera. Note that your default column value which should just be EUR (or 'EUR' to denote that it's a string) is now ('EUR'). Once you try changing the name to of the column to something else and then click OK, you should then get an error complaining of "Invalid varchar2 default value" with a more specific message of "Default values size 7 is greater than the allowed 3"
    You have provided a work around, and thanks for that, but it would be nice to edit everything in the Edit table dialog box if you're modifying more than one column name. I'm tasked with cleaning up a bit of a messy database, and there are a good deal of columns to be renamed.
    Cheers,
    Chris

  • Reason to set MaxErrorCount along with Propogate value for Excel Files

    Hi,
    I had an ETL earlier which processed CSV files from a folder. The requirement was to load the error files into a Rejected folder but continue to process all the files from the source Folder. This requirement was satisfied by setting the value of the
    system variable "Propogate" in EventHandler section for DataFlowTask to "false".
    MaxErrorCount value for the ForEach Loop is having its default value as "1".
    When tested, it was working perfectly fine
    Now currently there is an Excel file as source having same requirement as above. But even when then variable "Propogate" was set to "false" as above, the execution was getting stopped when an error file was found.
    Later I found the below link :
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/0065b5c2-f633-4cbf-81f9-031d1ed25555/how-to-skip-wrong-excel-files-ignore-errors-on-ssis-foreach-task
    As mentioned in the link, I have done below changes
    1)Set MaxErrorCount for ForEachLoop to 1000
    2)"Propogate" variable is set to false
    Now this is working perfectly fine.
    Can you please let me know why did the setting of "Propogate" worked for CSV but did not work for Excel. For Excel files why was an additional setting for MaxErrorCount  was required.
    It would be very much helpful if I can get a detail information on the above
    Thanks,
    Raksha
    Raksha

    Hi Raksha,
    In you SSIS package, setting the Propagate system variable to False of the Event Handler prevents the Data Flow Task (DFT) propagating its failure to its parent container. For the ValidateMetadata property of a Data Flow Task Component, it doesn’t only affect
    the DFT at design time but also at runtime. During the Validation phase, a component is supposed to check to make sure that the cached metadata in the package is still in sync with the underlying table/view/query. If there is a mismatch, the component returns
    a special status (VS_NEEDSNEWMETADATA). When this happens at design-time, SSIS triggers a metadata refresh by calling ReinitializeMetadata(). At runtime, this results in an error.
    In your scenario, by setting the ValidateMetadata property to false, the error of the DFT is avoided, hence, you don’t need to set the MaxErrorCount to a value more than 1.
    For more information about how ValidateMetadate property works, please see Matt’s answer in the following thread:
    http://stackoverflow.com/questions/3297097/validateexternalmetadata-property-what-exactly-does-this-do 
    Regards,
    Mike Yin
    TechNet Community Support

  • Find characteristic with fixed value at planning levels

    Hi Experts,
    I need to know which are the planning levels that contains a characteristics with a specific fixed value (ex: 0UVERSION = “220” )
    Does anybody know how can I do it?
    Thanks in advance

    Hi,
    Please create a query (tcode SQVI) on tables UPC_PLEVEL and UPC_OPTIOS. The join will be on field GUID. Select all the fields as available for display and selection. UPC_OPTIOS has the selection values maintained for the level. Please put in
    UPC_OPTIOS-FIELDNAME  = 0UVERSION
    UPC_OPTIOS-SIGN            = I
    UPC_OPTIOS-LOW = 220
    this will give you all the levels that have the said value
    hope this was helpful
    thanks

Maybe you are looking for