Pro*C & SQLDA with NULL value for predicate column

Hi: I am using a C program to update a table via a dynamic sql (method 4) and SQLDA. In the update statement predicate, I have place holders (as in TBLCOL=:C000). One of the columns in the predicate contains null values, so I set L[n] = 0, V[n] = pData (which pData[0] = '\0'), *(I[n]) = -1, and T[n] = 5 (for text). I cannot find the row that I know is there.
I cannot change my statement to contain TBLCOL IS NULL, since I don't know ahead of time if I'm looking for rows with null values for this column. The Pro*C manual says that by setting the appropriate *(I[n]) = -1, it indicates to Oracle to simulate the "IS NULL" clause, and update the appropriate rows. In my case, I receive 1403 as SQLCODE when I use TBLCOL=:C000 vs TBLCOL IS NULL. What am I doing wrong? Thank you for your help.

You should include these columns as well;
ChangeType (see mxi_changetype)
ValOwner (repository)
UserID ("jobid=<>", usermskey, GUI (mmc), DG (dyngrp), reconcile)
IdAudit (This is the event task (add and del member for assignments)
ParentAuditId (AuditID of parent which last updated the attribute, not consistent)
ChangedBy (Holds the MSKEY of the user which last changed the attribute)
ExpiryTime
to make sure you get a fuller picture of the audit record.
Your selection does not cover all events and descriptions
br,
Chris

Similar Messages

User Created in OIM 11.1.1.5 with null value for mandatory field.

Hi,
We had updated one UDF as mandatory field on OIM user form. We can see the * in front of that field. Now if we create the user using web console (Using UI), we are not able to create the user without giving some value in that UDF as it is mandatory. However if we created the user with UDF value as null using Trusted recon, User sucessfully created in OIM. I had attached the screen shot for that user which create in OIM with UDF value as null.
Is any thing else also need to do to make UDF as mandatory field.
Regards,
Sid

I am not sure this is a bug. Such mandatory checks will often only apply to administrative changes from the GUI. You may not always be able to enforce the same quality of data in reconciled data as you wish to impose for changes made through OIM, and it may prove an issue in some cases if such users could not be reconciled. In this case the use will go into OIM, but you will be forced to populate a value in the mandatory field if you later try to update them in OIM.

Table Control with default values for a Column

Hi,
I have a table Control with fields kschl    kbetr    konwa    mark
i have created a range for KSCHL
now i need to pass this to the table column
Kindly suggest how can i handle this?
BEGIN OF y_condition,
kschl       TYPE kscha,
kbetr       TYPE kbetr_kond,
konwa       TYPE konwa,
mark        TYPE char1,
END OF y_condition,
t_cost TYPE STANDARD TABLE OF y_condition,
MODULE mo_tc_cost_init OUTPUT.
IF w_tc_cost_c IS INITIAL.
    REFRESH CONTROL c_tc_cost FROM SCREEN c_scr2000.
    REFRESH t_cost.
    MOVE c_select TO w_tc_cost_c.
    FREE r_kschl.
    MOVE: c_i    TO r_kschl-sign,
          c_eq   TO r_kschl-option,
          c_zhb1 TO r_kschl-low.
    APPEND r_kschl.
    MOVE: c_i    TO r_kschl-sign,
          c_eq   TO r_kschl-option,
          c_zhb2 TO r_kschl-low.
    APPEND r_kschl.
    MOVE: c_i    TO r_kschl-sign,
          c_eq   TO r_kschl-option,
          c_zhb3 TO r_kschl-low.
    APPEND r_kschl.
ENDIF.

Can you clarify please?... you say have a table control containing the following columns:
kschl TYPE kscha,
kbetr TYPE kbetr_kond,
konwa TYPE konwa,
mark TYPE char1
so where do you expect the range table "r_kschl" to appear? ... did you want a second table control on the screen?
Jonathan

To overcome column with null value-urgent

hai all,
when i query i get column with null value.
how to solve it?
thank in advance.
rcs
SQL> DESC SCOTT.CB1;
Name Null? Type
ID NUMBER
SUPCODE NUMBER
SUPLNAME VARCHAR2(100)
NAME VARCHAR2(100)
ITEMCODE VARCHAR2(10)
RECDOC NUMBER
RECDATE VARCHAR2(10)
TOTVALUE NUMBER
QTY NUMBER
CB_IPNO NUMBER
CB_VNNO NUMBER
CB_VDT VARCHAR2(10)
CB_AMT NUMBER
RECDOC_GR VARCHAR2(30)
RECDATE_GR DATE
SUPCODE_GR VARCHAR2(10)
TABLE LOOK LIKE THIS (NOT ALL DATA IN SAME ROW, BECUSE I INSERTED LAST 3 COLUMN VALUES):
ID     SUPCODE     SUPLNAME     NAME     ITEMCODE     RECDOC     RECDATE     TOTVALUE     QTY     CB_IPNO     CB_VNNO     CB_VDT     CB_AMT     RECDOC_GR     RECDATE_GR     SUPCODE_GR
2015               AAAA                04117     9083          10545.6     78
2016               BBBB                    04609     9087          25200     3600
2017               GGGG                    04609     9088          28175     4025
2018                                   36591371.64     2565017.27
                                                                 00001/07-08     02/04/2007     14020362
                                                                 00002/07-08     02/04/2007     14020362
                                                                 00003/07-08     02/04/2007     14010254
                                                                 00004/07-08     02/04/2007     14010254
                                                                 00005/07-08     02/04/2007     14021458
SQL> SELECT DISTINCT ID, SUPCODE_GR, NAME, ITEMCODE, RECDOC, RECDATE_GR, TOTVALUE, QTY FROM SCOTT.CB
1;
ID SUPCODE_GR
NAME
ITEMCODE RECDOC RECDATE_G TOTVALUE QTY
1
PRO.AT.ALU.POWDER UNCOATED
04609 15 51975 7425
2
PEN, GEL PEN
07969 17 154 11
ID SUPCODE_GR
I NEED RESULT AS FOLLOWS (ALL RESPECTIVE DDATA IN ONE LINE NOW NOT LIKE THAT):
ID     SUPCODE     SUPLNAME     NAME     ITEMCODE     RECDOC     RECDATE     TOTVALUE     QTY     CB_IPNO     CB_VNNO     CB_VDT     CB_AMT     RECDOC_GR     RECDATE_GR     SUPCODE_GR
2015               AAAA                04117     9083          10545.6     78                         00001/07-08     02/04/2007     14020362
============

Even accounting for the formatting, I'm not sure I even understand the question. It could be any number of different problems or non-problems.

Using Convert to handle NULL values for empty Strings ""

After having had the problem with null values not being returned as nulls and reading some suggestion solution I added a converter to my application.
<converter>
    <converter-id>NullStringConverter</converter-id>
    <converter-for-class>java.lang.String</converter-for-class>
    <converter-class>com.j2anywhere.addressbookserver.web.NullStringConverter</converter-class>
</converter>
...I then implemented it as follows:
public String getAsString(FacesContext context, UIComponent component, Object object)
    System.out.println("Converting to String : "+object);
    if (object == null)
      System.out.println("READING null");
      return "NULL";
    else
      if (((String)object).equals(""))
        System.out.println("READING null (Second Check)");
        return null;
      else
        return object.toString();
public Object getAsObject(FacesContext context, UIComponent component, String value)
    System.out.println("Converting to Object: "+value+"-"+value.trim().length());
    if (value.trim().length()==0 || value.equals("NULL"))
      System.out.println("WRITING null");
      return null;
    else
      return value.toUpperCase();
...I can see that it is converting my values, however the object to which the inputText fields are bound are still set to empty strings ""
<h:inputText size="50" value="#{addressBookController.contactDetails.information}" converter="NullStringConverter"/>Also when reading the object values any nulls are already converted to empty strings before ariving at the converter. It seems that there is a default converter handling string values.
How can I resolve this problem as set nulls when the input value is an empty string other then checking every string in my class individually. I would really hate to pollute my object model with empty string tests.
Thanks in advance
Edited by: j2anywhere.com on Oct 19, 2008 9:06 AM

I changed my converter as suggested :
public Object getAsObject(FacesContext context, UIComponent component, String value)
    if (value == null || value.trim().length() == 0)
      if (component instanceof EditableValueHolder)
        System.out.println("SUBMITTED VALUE SET TO NULL");
        ((EditableValueHolder) component).setSubmittedValue(null);
      else
        System.out.println("COMPONENT :"+component.getClass().getName());
      System.out.println("Converting to Object: " + value + "< to " + null);
      return null;
    System.out.println("Converting to Object: " + value + "< to " + value);
    return value;
}which produces the following output :
SUBMITTED VALUE SET TO NULL
Converting to Object: < to null
Info : The INFO line however comes from my controller object where I print out the set value :
package com.simple;
import java.util.ArrayList;
import java.util.List;
public class Controller
private String information;
/** Creates a new instance of Controller */
public Controller()
    System.out.println("Createing Controller");
    information = "Constructed";
public String process()
    System.out.println("Info : "+getInformation());
    return "processed";
public String reset()
    setInformation("Re-Constructed");
    System.out.println("Info : "+getInformation());
    return "processed";
public String setNull()
    setInformation(null);
    System.out.println("Info : "+getInformation());
    return "processed";
public String getInformation()
    return information;
public void setInformation(String information)
    this.information = information;
}I also changes my JSP / JSF page a little. Here is the updated version
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%--
    This file is an entry point for JavaServer Faces application.
--%>
<html>
<head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
    <title>JSP Page</title>
</head>
<body>
    <f:view>
      <h:form>
        <h:inputText id="value" value="#{Controller.information}"/>
        <hr/>
        <h:commandLink action="#{Controller.process}">
          <h:outputText id="clicker" value="Process"/>
        </h:commandLink>
        <hr/>
        <h:commandLink action="#{Controller.reset}">
          <h:outputText id="reset" value="Reset"/>
        </h:commandLink>
        <hr/>
        <h:commandLink action="#{Controller.setNull}">
          <h:outputText id="setNull" value="Set Null"/>
        </h:commandLink>
      </h:form>
    </f:view>
</body>
</html>The converter is declared for the String class in the faces configuration file. From the log message is appears to be invoked, however the object is not set to null.
I tested this with JSF 1.2_04-b20-p03 as well as 1.2_09-b02-FCS.
any other suggestions what could be causing this.

Need help with NULL values in Crosstables

Hello everybody,
I need some help with NULL values and crosstables. My issue is the following:
I have a query (BW - MDX-Query) that gives me turnover measures for each month. In Crystal Reports I choose crosstable to display this whereby I put all month in columns and all turnover-measures in rows. Each month that has a value (measures are not empty) is chown in the crosstables rows. So far so good. The problem occures when there are month that actually have no values (measures are empty). In that case these months are not chown in columns. But I need CR to display these columns and show the value 0. How can I do that?

Hi Frank,
Cross tab shows the data based on your column and these column fields are grouped and based on the group it will show your summaries.
If there is no data for any of your group it will not display that group. In this case you will have to create a standard report which should look like cross tab and to get zero values you need to write formulas .
Example if you want to display Moth wise sales :
if Month() = 01 Then
sum() else 0
Now this formula will check if your month is Jan, then it will sum up the values else it will display zero value.
This is possible only through standard report not with Cross Tab.
Thanks,
Sastry

How can I get null values for the later weeks

Hi All,
When I execute this code I get the records till current week.
How can I display the output so that I get null values for the later weeks. (with the help of v_numOfWeeks variable in the code)
Thanks,
Vikram
DECLARE
   v_query VARCHAR2(4000);
   TYPE ref_cursor IS REF CURSOR;
   v_refcur ref_cursor;
   v_sum NUMBER;
   v_id NUMBER;
   v_name VARCHAR2(1000);
   v_weeknum NUMBER;
   v_pernum NUMBER;
   v_numOfWeeks NUMBER := 5;
BEGIN
v_query := ' SELECT SUM(product_bkg), postn_id, postn_tbl.postn_name, b.week_num, b.period_num
                          FROM ops_cv_extract b, (SELECT row_id, desc_text postn_name
                      FROM s_postn) postn_tbl
                      WHERE lvl_6_id = 5767
                      AND fiscal_year = 2008
                      AND b.week_num < 4
                      AND b.period_num = 3
                      AND b.postn_id = TO_NUMBER(postn_tbl.row_id)
                      GROUP BY postn_id, postn_tbl.postn_name, b.week_num, b.period_num
                      ORDER BY postn_tbl.postn_name, b.week_num';
OPEN v_refcur FOR v_query;
LOOP
   FETCH v_refcur INTO v_sum, v_id, v_name, v_weeknum, v_pernum;
   EXIT WHEN v_refcur%notfound;
   dbms_output.put_line('P'|| v_pernum||'W'|| v_weeknum||' '||v_name||' '||v_sum);
END LOOP;
END;
This is the output when I execute this code.
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W2 COMM CNTRL TAM 216 12561.4
P3W3 COMM CNTRL TAM 216 2027.1
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
This is the output I'd like to get
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W4 COMM CNTRL ISAM 213
P3W5 COMM CNTRL ISAM 213
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W4 COMM CNTRL ISAM 273
P3W5 COMM CNTRL ISAM 273
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W4 COMM CNTRL TAM 213
P3W5 COMM CNTRL TAM 213
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W4 COMM CNTRL TAM 273
P3W5 COMM CNTRL TAM 273
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
P3W4 Damon Walters
P3W5 Damon Walters Edited by: polasa on Oct 28, 2008 6:42 PM

Sure, in a Single SQL ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.01
satyaki>
satyaki>
satyaki>-- Start Of Test Data --
satyaki>with week_tab
2 as
3    (
4      select 1 period_num, 1 week_num, 10 bkg1 from dual
5      union all
6      select 1, 2, 40 from dual
7      union all
8      select 1, 3, 30 from dual
9      union all
10      select 1, 2, 20 from dual
11      union all
12      select 1, 1, 10 from dual
13      union all
14      select 1, 1, 20 from dual
15      union all
16      select 1, 3, 10 from dual
17      union all
18      select 2, 1, 15 from dual
19      union all
20      select 2, 2, 20 from dual
21      union all
22      select 2, 3, 10 from dual
23      union all
24      select 2, 1, 15 from dual
25      union all
26      select 2, 2, 30 from dual
27      union all
28      select 2, 3, 20 from dual
29    )
30 -- End Of Test Data --
31 select period_num,
32         week_num,
33         (
34            select sum(week_tab.bkg1)
35            from week_tab
36            where period_num = m.period_num
37            and   week_num   = m.week_num
38            group by week_num, period_num
39         ) sum_bkg1
40 from (
41        select dum.week_num,
42              wk.period_num
43        from (
44                select 1 week_num from dual
45                union all
46                select 2 from dual
47                union all
48                select 3 from dual
49                union all
50                select 4 from dual
51                union all
52                select 5 from dual
53              ) dum ,
54              (
55                select distinct period_num
56                from week_tab
57          ) wk
58      ) m;
PERIOD_NUM   WEEK_NUM   SUM_BKG1
         1          1         40
         1          2         60
         1          3         40
         1          4
         1          5
         2          1         30
         2          2         50
         2          3         30
         2          4
         2          5
10 rows selected.
Elapsed: 00:00:00.48
satyaki>Regards.
Satyaki De.

How to create a dimension object in SAP BW Unv with Null value

Hello,
for query syncronisation task, I need a dimension object in my BW universe with NULL value. Does someone know, how to do it or if its possible?
Regards,
Thilo

Hi Thilo,
so the only common item is Material then - correct ?
Query 1                                                                                Query 2
Formulation (grouping of materials)                                                  (No counterpart)
Material                                                                                Material
dummy key figure (why?)                                                                Company Code
                                                                                10 Keyfigure
Is this something you regular have to do ? what about a MultiProvider ?
did you try "merged dimensions" in the Web Intelligence Report ?
Ingo

Sql query slowness due to rank and columns with null values:


Sql query slowness due to rank and columns with null values:
I have the following table in database with around 10 millions records:
Declaration:
create table PropertyOwners (
[Key] int not null primary key,
PropertyKey int not null,
BoughtDate DateTime,
OwnerKey int null,
GroupKey int null
go
[Key] is primary key and combination of PropertyKey, BoughtDate, OwnerKey and GroupKey is unique.
With the following index:
CREATE NONCLUSTERED INDEX [IX_PropertyOwners] ON [dbo].[PropertyOwners]
[PropertyKey] ASC,
[BoughtDate] DESC,
[OwnerKey] DESC,
[GroupKey] DESC
go
Description of the case:
For single BoughtDate one property can belong to multiple owners or single group, for single record there can either be OwnerKey or GroupKey but not both so one of them will be null for each record. I am trying to retrieve the data from the table using
following query for the OwnerKey. If there are same property rows for owners and group at the same time than the rows having OwnerKey with be preferred, that is why I am using "OwnerKey desc" in Rank function.
declare @ownerKey int = 40000
select PropertyKey, BoughtDate, OwnerKey, GroupKey
from (
select PropertyKey, BoughtDate, OwnerKey, GroupKey,
RANK() over (partition by PropertyKey order by BoughtDate desc, OwnerKey desc, GroupKey desc) as [Rank]
from PropertyOwners
) as result
where result.[Rank]=1 and result.[OwnerKey]=@ownerKey
It is taking 2-3 seconds to get the records which is too slow, similar time it is taking as I try to get the records using the GroupKey. But when I tried to get the records for the PropertyKey with the same query, it is executing in 10 milliseconds.
May be the slowness is due to as OwnerKey/GroupKey in the table can be null and sql server in unable to index it. I have also tried to use the Indexed view to pre ranked them but I can't use it in my query as Rank function is not supported in indexed
view.
Please note this table is updated once a day and using Sql Server 2008 R2. Any help will be greatly appreciated.

create table #result (PropertyKey int not null, BoughtDate datetime, OwnerKey int null, GroupKey int null, [Rank] int not null)Create index idx ON #result(OwnerKey ,rnk)
insert into #result(PropertyKey, BoughtDate, OwnerKey, GroupKey, [Rank])
select PropertyKey, BoughtDate, OwnerKey, GroupKey,
RANK() over (partition by PropertyKey order by BoughtDate desc, OwnerKey desc, GroupKey desc) as [Rank]
from PropertyOwners
go
declare @ownerKey int = 1
select PropertyKey, BoughtDate, OwnerKey, GroupKey
from #result as result
where result.[Rank]=1
and result.[OwnerKey]=@ownerKey
go
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

JDBC Receiver Adapter with Null Value

HI,
I have configured ID for JDBC Receiver. In my communication channel, I already check Integration of Empty String Values = Null Value. However, when I check the result from audit log, it still shows that SAP XI sends the null value to database. In my understanding, it should not send the field which has null value (It shouldn't be included in sql statement).
I check this with other scenario. With the same check at Integration of Empty String Values = Null Value, it doesn't send null value to database. It happens only with my first scenario.
Have anyone ever been through this before? Any suggestion please?
Thanks,
Pavin

Hi,
1. The occurrence is 0...1
2. This is the first result with null value (Please see field Error)
UPDATE EXPCRM_T_CustomerProfile SET RequestID=455, RecordNo=1, SAPCustomerCode=0001000344, Error=NULL, Status=2, UpdateDateTime=12/03/2008 13:45:03 WHERE (RequestID=455 AND RecordNo=1)
Then, I change the option from Null Value to Empty string. This is the result.
UPDATE EXPCRM_T_CustomerProfile SET RequestID=455, RecordNo=1, SAPCustomerCode=0001000344, Error=', Status=2, UpdateDateTime=12/03/2008 13:46:12 WHERE (RequestID=455 AND RecordNo=1)
Field Error Change from NULL to '
The expected result from me is that field Error should not exist at all. Please help.
Thanks,
Pavin

bc4juix:StyledText doesn't work with null values?

Hi , anyone knows why the <bc4juix:StyledText> tag doesn't work with null values?
For example when datasource does not give back data...
Thanks
Guillermo

Which version of Jdev are you using? What are the results you are getting?

Clarification needed on the behaviour of count with null values

Hi friends,
I am confused about the result given by the count aggregate function when dealing with null. Please can anybody clarify about that to me. Here is what i tried
CREATE TABLE Demo ( a int);
INSERT INTO Demo VALUES
(1),
(2),
(NULL),
(NULL);
SELECT COUNT(COALESCE(a,0)) FROM Demo WHERE a IS NULL; -- Returns 2
SELECT COUNT(ISNULL(a,0)) FROM Demo WHERE a IS NULL; -- Returns 2
SELECT COUNT(*) FROM Demo WHERE a IS NULL; -- Returns 2
SELECT COUNT(a) FROM Demo WHERE a IS NULL; -- Returns 0
Please can anybody explain me why the result is same for the first three select statements and why not for the last select statement. And what does COUNT(*) actually mean?
With Regards
Abhilash D K

There is a difference to the logic when using a column name versus "*" - which is explained in the documentation (and reading it is the first thing you should do when you do not understand a particularly query/syntax). When you supply a column
(or expression) to the count function, only the non-null values are counted. Isnull and coalesce will obviously replace a NULL values, therefore the result of the expression will be counted.
1 and 2 are effectively the same - you replace a null value in your column with 0 and each query only selects rows with a null column value. The count of non-null values of your expression is therefore 2 - the number of rows in your resultset.
3 is the number of rows in the resultset since you supplied "*" instead of a column. The presence of nulls is irrelevant as documented.
4 is the number of non-null values in the resultset since you DID supply a column. Your resultset had no non-null values, therefore the count is zero.

Range interval partitioning with null value

Hello,
I have question, how can I create table with partition and after that I will insert null value in the partition key like this kind of
range interval partitioning with null value.
I have Oracle 11g.
Thanks
Mohammed

user13777053 wrote:
Thank you, but my question is about range interval not for range?http://docs.oracle.com/cd/E11882_01/server.112/e25523/partition.htm#VLDBG00220
A MAXVALUE literal can be defined for the highest partition. MAXVALUE represents a virtual infinite value that sorts higher than any other possible value for the partitioning key, *including the NULL value.*
So since you're trying to partition by interval (which doesn't support a MAXVALUE clause) you're out of luck.
There's probably fancy hacks and what not you could try to implement, but i'm not about to recommend any of those here :)
Cheers,

Validations: Null value for LOVs

See http://htmldb.oracle.com/pls/otn/f?p=24317:239
I have a "Item is not null" validation on that LOV item. The item has "Display null value" set to Yes and a LOV of STATIC2:1,2,3
If I leave the Null return value for the item to blank, the engine defaults it to %null% and the validation "knows" that this is really the same as a null value and so it kicks in (good).
But if I change the Null return value to something like %, the validation doesn't complain, it thinks that this is a not-null value.
Why the inconsistency? Does this mean that we are expected to use the default value of the Null return value i.e. leave it blank and let the engine put in %null%?
Comments? Thanks

Vikas - The declarative not null validation types recognize "actual" null or %null% as null values. This equivalence holds in numerous other situtations during page processing. Why does %null% get special treatment? A convention was chosen and that's it. And it works for almost everybody in almost all situations. In other words, it's useful, if not perfect. If you want a different value, you can specify one in the LOV (as you described). Then you can recognize and convert these values to null or %null% in an after-submit computation so that validations and other mechanisms work normally. (Perhaps it would help if the Builder created such a computation for items having LOVs with specified null values.) One use case for using a specified null return value might be where you want to distinguish a POSTed "actual" null value from the selected "null" value for which you have specified a null return value. Then you can tell if the value was selected from the LOV or whether it got a null value from the item's cache or source methods.
Scott

How do I set a NULL value for the parameter field

Hi
I've another question. I'm going to set single values for parameter fields.
// e.g. set today for StartDate parameter field
fc.setCurrentValue("", "StartDate", new Date());
It should be possible to set a NULL value for date parameter fields.
fc.setCurrentValue("", "StartDate", (Date)null);
But this do not work. How do I set a NULL value correctly?
Thank you in advance.
Best regards,
Thomas

First question - is it a stored procedure parameter?
You can't set a regular parameter field value to a null value.
There was an issue with old version of the JRC, where it was allowing null to go through, but had unexpected behavior at times.
Sincerely,
Ted Ueda

Pro*C & SQLDA with NULL value for predicate column

Similar Messages

Maybe you are looking for