Aggregates on Technical Content

Hi Guru's,
I have installed the Technical Content Cube ( 0BWTC_C05) ,which is for ware house performance monitoring, Now I have to create a process chain to load data into this Infocube. As we are not using the Multiprovider,we cant have the standard queries on this cube. I have created a Query to get the data necessary . I want to create an aggregate for this infocube . How to manage this in the process chain ,and My doubt is if we create the aggr in Dev system, will this be carried to QA system and prd ?? I will be really Glad if any of you can send me the PC Chain used to load this Infocube, as I am not sure what process to include .
Thanks,
Krish

Hi Krish,
You can transport the aggregates created in Dev to QA and Prod boxes. Also most of the projects do allow the creation of aggregates in Prod/QA also so you can create the aggregates there.
The load steps for 0BWTC_C05 would be like this:
1. Load all the attribute/text associated with the cube 0BWTC_C05.
2. Aplly Hier/Attr Change.
3. Load the data for 0BWTC_C05.
Bye
Dinesh

Similar Messages

Technical Content - Query Execution

Hi,
I have recently activated the Technical Content.
How do I identify the number of the times the query has been executed by the user? I found one column 'Number of Navigations' in the BW-Statistics workbook. What is this meant for ?
Thanks
Ramesh Ganji

hi Ramesh,
oss note 130696 -Performance trace in BW-Helps may explain the meaning.
to identify number of times query executed, there is keyfigure 0TCTSTAUIK - frequency,
check if helps business content query 0BWTC_C10_Q021
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/84353cf261303de10000000a11402f/frameset.htm
you can utilize infoobjects OTCTQUERY, 0TCTSTAUIK (frequency), 0TCTUSERNM, 0TCTNAVCTR from multiprovider 0BWTC_C10
most user-run queries
130696 -Performance trace in BW-Helps
Symptom
How can you monitor the performance of a query in BW?
Other terms
Performance, tracing, BW, query, report, time
Solution
1) Activate the saving of statistical data for each InfoCube
-> BW Admin Workbench - Tools -> BW Statistics for Infoproviders ->
Select the "OLAP" field for the InfoCube.
3) Execute report/query
2) Analyze the RSDDSTAT table using Transaction SE16
Access, for example, using the InfoCube name or the user name or the
timestamp
1. Times that are saved:
QTIMEOLAPINIT
Time of the initialization of the query (for example, loading query in OLAP, compiling if required)
QTIMEOLAP
Time that the OLAP processor required
QTIMEDB
Time the database + network required to select the transaction data. The time is measured from when the SQL command is send to the database, and it is stopped when the requested data reaches the application server. This time therefore includes the transport on the network and the selection on the database.
QTIMEVARDP
Time the user required to enter the variables
QTIMEUSER
Time the user required between the navigation steps
QTIMECLIENT
Time of data formatting in the frontend
The time measurment starts when the OLAP processor has completed the data formatting. The data is then sent to the frontend (EXCEL). The time is stopped when the frontend (BW add-in in EXCEL) has inserted all data in the worksheets (writing the contents and formatting cell, if required). The time therefore includes the transport on the network with the RFC connection and the output in the frontend.
TIMECHAVLREAD
Time required to read master data
TIMEAUTHCHECK
Runtime of the authorization check.
TIMEREST
Time that could not be assigned in more detail (should be equal to 0; if this is not the case, something in the internal processing of the OLAP processor occured differently than expected.)
QRUNTIMECATEGORY
Time of a navigation step (QTIMEOLAPINIT + QTIMEOLAP + QTIMEDB + QTIMEEXCEL + QTIMECHAVLREAD) rounded to the next higher scaling (1,10,100,1000 ... seconds). As of 1.2B, this is rounded to 1,2,3, ... 10,20,30,...100,200,300,... seconds.
1. Data regarding the size of the query:
QDBSEL
Number of the records that had to be read on the database
QDBTRANS
Number of records that the database transferred to the server
QNUMCELLS
Number of cells that were transferred to the frontend
QNUMRANGES
Number of formattings that were transferred to the frontend
RECCHAVLREAD
Number of master data records to be read
1. In addition, the following is saved:
QAGGRUSED
Name of the aggregate used
QNACHLESEN
Indicator: Query reads during each navigation step
1. Administrative information
STATUID
Key of the table; link in view RSDDSTAT_V
QSESSION
All data for a call of the frontend (between start and end of the frontend) is compounded with this unique GUID.
QNAVSTEP
The navigation steps of a QSESSION are numbered in ascending order
QNUMOLAPREADS
Number of read operations OLAP processor for each navigation step
HANDLE
In the frontend, each embedded query has a separate, sequential number (handle)
If you want to analyze a certain query, start it and filter the values from the table afterwards: Selection options: infocube, user name, queryid (can be determined in the report monitor (Transaction RSRT)-> Technical information). The STARTTIME (UTC time) tells you whether you have found the correct session.
You can recognize a session because the QSESSION is always assigned the same ID. The sequence of the navigation steps is saved in QNAVSTEP. However, you can also determine it using the STARTTIME.

BW Statistics and Technical Content

HI,
I am working on BI 7.0.
I understand both BW statistics and Technical content are used to monitor the system status to improve performance. But what I dont get is teh exact difference between these two.
BW statistics provides the follwing Dataprovider:
0BWTC_C02     BW Statistics - OLAP
0BWTC_C03     BW Statistics - OLAP, Detail Navigation
0BWTC_C04     BW Statistics - Aggregates
0BWTC_C05     BW Statistics - WHM
0BWTC_C09     BW Statistics: Condensing InfoCubes
0BWTC_C11     BW Statistics: Deleting Data from InfoCubes
Whereas Technical content provides following:
0TCT_C03     Data Manager Statistics (Details)
0TCT_C22     DTP Statistics
0TCT_C01     Front End and OLAP Statistics (Aggregated)
0TCT_C02     Front End and OLAP Statistics (Details)
0TCT_C23     Infopackage Statistics
0TCT_C21     Process Chain Statistics
Please advice
Regards
Pankaj

Thanks...
but in the following link of 7.0 saphelp, it still shows the BW statistics cube 0BWTC* and so is the confusion whether to use 0BWTC* also aprt from using 0TCT*
http://help.sap.com/saphelp_nw70/helpdata/en/44/10cb9a8f345cf9e10000000a155369/frameset.htm
Regards
Pankaj

BI Technical Content in BI 7.0

Hi Experts,
Could any one help me in installing the BI Technical content in BI 7.0.
Please give me step by step procedure and tell me which are the Infocubes and Multiproviders i need to install.
Thanks,
Mansi.........

Hi,
please go through on below mention steps:
1.     In the administrator workbench, click the Business     Content bar on the left side and then click to set the default source systems.
2. The default source systems are displayed. Click to accept them &       continue. Double click Object Types.
1.     Click     and then select the collect automatically option i.e., BW will collect related objects for the infoproviders to be selected.
       4.   Click     and select the in dataflow before and afterwards             option. Now the infoobject & the object on which the infoobject depends will   be collected and activated together.
        5. Now we will select a Business content object and activate it. Click Select                objects under Infocubes to locate the required infocubes.
       6. Select the required infoobjects and then click
           Now the selected infocubes along with the respective infoobjects will be              transferred for installation.
       7. Click install and then select install to activate the selected infoobject and the              associated objects.
       8. The install in background option can be used when activating a large object.

Unused queries & Technical Content

Hi folks,
I need to find out the unused queries (e.g. the ones that weren't used in last 13 months). As far as I know the best way is to use the technical content (0BWTC_C10); but unfortunately it's not active in our system at the moment.
Another option is, using the "Last Used" field of RSZCOMPDIR. We have another "but" here. I've figured out that this field is updated even though a query is opened in query designer.
My questions are:
1. Any ideas for defining such queries in this situation?
2. What are the disadvantages of using this technical content? (I mean the extra work load at server-side.)
Thanks.

hi pekcan,
you can run transaction rszdelete to get a list of all queries not used for a defined time.
Unused/unnecessary Queries can lead to higher times in the 'Open' &#56256;&#56526; 'Query' dialog. They also cause an unnecessary allocation of disk space.
Check regularly whether queries are really still in use. The 'Last Used' field in transaction RSZDELETE (Delete Objects) is related to table RSZCOMPDIR. 'Last Used' is updated in table RSZCOMPDIR with the exact timestamp of when queries are executed with the BEx Analyzer or Web Frontend.
to get some idea regarding technical content, use the links.
http://help.sap.com/saphelp_nw70/helpdata/en/f2/e81c3b85e6e939e10000000a11402f/frameset.htm
with hopes,
Raja singh

Error while trying to access data from virtual provider - Technical Content

Hi,
I am trying to install the new BI 2004s technical content. I am done with the installation I am trying to display data for the remote cubes delivered i.e. 0TCT_VC11/21 etc. but getting an error:
Error reading the data of InfoProvider 0TCT_VC11
There is still no data source assigned to VirtualProvider 0TCT_VC11
The virtual providers are of type "virtual provider based on DTP" since standard technical content didnt have any DTPs for the VC cubes I tried to create some direct access DTPs based on datasources 0TCT_DS11 but there also getting error:
Source doesnt support direct access
I saw the type for datasource 0TCT_DS11 and its using SAP SAPI and not direct access and couldnt change the type actually the same datasource is also used by cube 0TCT_C11 so changing the type probably wouldnt have been a good idea.
I found the following notes 996735 and implemented its change...but no use...
we are on SP10 and content 7.03 SP2. Can anybody please help??

Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI

Slow Moving Item Scenario - Technical content for Queries

Hello
Due to preparations for upgrade to BW 7.30 we would make an analysis of not or seldom used BEx reports (queries, workbooks, etc.)
All of unused objects should be deleted in advance of an upgrade.
I checked if there is a query which shows slow moving items for queries.
Is there any technical content (query) which reports this scenario for BEx objects?
Thanks for any advise.

follow steps in this doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11291595-0501-0010-c881-e02c27261b55

Error in transports of BI technical content

Hi ,
While transporting BI technical content , we are getting an error 'Program terminated (job: RDDEXECL, no.: 10524800)'
It also giving a dump as follows:
SAPSQL_ARRAY_INSERT_DUPREC
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
     in
    procedure "RSZ_P_DB_ELT_SET_IMMEDIATELY" "(FUNCTION)", nor was it propagated by
     a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
Kindly advice how this issue can be resolved .

Hi,
When you have the transport request under the tranport queue of the destination System and click to truck to import appear a windows with some tabs, in the last tab appear some checkboxes with diferent options, there are some that talk to overwrite the existing objets, and other talk abou repair. Click this ans try to import.
Sometimes work.
Regards,
Dani

Technical Content Activation failed

Hi guys,
I tried to activate Technical Content via SPRO's Activate Technical Content in SAP NetWeaver BI.
However, I am facing with these problems:
1. If I choose only Activate SAPI DataSources, I will get a time out.
2. If I choose only Activate Technical Content, I will get the following error message:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_RS_VERSION_NOT_FOUND
Date and Time          23.07.2008 09:38:27
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_RS_VERSION_NOT_FOUND' was raised, but it was not caught
      anywhere along
     the call hierarchy.
Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program
      'CL_RSSM_LOADING===============CP' has to be
     terminated.
What can you do?
     Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
     administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_RS_VERSION_NOT_FOUND', was not
     caught in
    procedure "CHANGE_VARIANT" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Object   could not be found in version
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_VERSION_NOT_FOUND"
    "CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM00G"
    "IF_RSPC_TRANSPORT~KEY_CHANGE"
If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
     Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
     In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"CHANGE_VARIANT" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can someone help to me solve both problems???Thanks!!

Hi,
Aks your Basis person to look into the dump in tcode ST22. Also you can check in the SAP notes for error message displayed in the dump. There you find the correction notes.
Mostly this problem is related to Service packs.
Regards,
Sreenivas.

Technical Content Activation Failed in BI7

Dear experts,
Basically, I have posted this question in another category but the response is very disappointing. So I though of moving the question to here.
I am using SAPKW70015 i.e. Release 15. I tried to activate Technical Content via SPRO's Activate Technical Content in SAP NetWeaver BI.
However, I am facing with these problems:
1. If I choose only Activate SAPI DataSources, I will get a time out.
2. If I choose only Activate Technical Content, I will get the following error message:
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RS_VERSION_NOT_FOUND
Date and Time 23.07.2008 09:38:27
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RS_VERSION_NOT_FOUND' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSSM_LOADING===============CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_RS_VERSION_NOT_FOUND', was not
caught in
procedure "CHANGE_VARIANT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Object could not be found in version
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_VERSION_NOT_FOUND"
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM00G"
"IF_RSPC_TRANSPORT~KEY_CHANGE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"CHANGE_VARIANT" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can someone help to me solve both problems???Thanks!!

Hi,
Aks your Basis person to look into the dump in tcode ST22. Also you can check in the SAP notes for error message displayed in the dump. There you find the correction notes.
Mostly this problem is related to Service packs.
Regards,
Sreenivas.

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Urgent-Issue with Technical Content.

Hi experts,
we have activated the technical content.Now we are Initilize and run deltas with Process Chain.
Under one of the Infosource loading the datatarget(0BWTC_C02),i have the following standard delivered infopackages
1) Delta - OLAP Transaction Data
2) OLAP Transaction Data Initialization
3) OLAP Transaction Data: Delta Initialization
4) Transaction Data OLAP - Delta
5) Transaction Data OLAP - Delta Initialization
I have checked all these infopackages,i dont see any difference when i tried to compare the selection conditions and datatargets.
Now my question is
1) How do i select which infopackage should be in the process chains?
2) Also do we need to create and delete indexes for the technical content cubes too?
Please advise
thanks in advance
kiran

Hi sunil,
I appreciate your reply.
Issue 1:My question was as i have 5 Standard infopackages with no differences.If you see my first posting.How should i consider which infopackage to choose for in my Process Chain?
Ex: As i see 3 Init Infopackages witht he same name.How should choose which onfopackage to include for the process chain?
Also i see 2 delta infopackages witht almost the similar name.How should i consider which infopackage to include for the process chain.
Issue 2: I do understand that indexes are deleted before loading data for better loading performance and then indexes are created for reporting perfomances.
But my question was do we have to create/delete indexes for Technical content too.What is the recommended solution?What are the Pros and Cons?
Hope i am clear with my questions this time.
thanks in advance
kiran

Activating technical content in BW7.0

Hi,
We are in the process of upgrading BW 3.5 to NW 2004s. We followed OSS note 965386 to activate technical content. We assigned all the required authorization to the user and followed the following path to activate the content:-
SPRO>SAP NW>Business Intelligence>Setting for BI Content>Business Intelligence>BI Admin Cockpit>Activate technical content in SAP NW BI
When we went to SPRO we did not see the last step i.e. Activate technical content in SAP NW BI.
Any help in this regard? Also, why not we can activate the technical content from RSA1.
Regards,
Anil

Its just like installing any other BI content. Just check what are the cubes you would be needing. If you are not sure and want to have latest and greatest, you can stick with the MultiProvider(0BWTC_C10) that is delivered comprising of all the six individual technical content cubes. While installing system would prompt you whether to install the datsources, say yes and provide ur credentials. That would take of activating DS. After installing, replicate the datsources from the source system. You are all set to go.
or alternately run program RSTCC_ACTIVATE_ADMIN_COCKPIT to install all this stuff automatically instead of collecting all the objects in BI content screen.
Message was edited by:
voodi

Variable in technical content

Hi all,
In the TECHNICAL CONTENT of my system I have a variable for the Exchange Rate Type (0RTYPE)called Z_RTYPE. When I run a query that use the currency conversion type this variable pops up in the variable screen, but it is not specifically added to my query.
Because this is not added to my query I cannot see this variable in the "Query Properties", which I need to be able to sort it.
Is there some way to add this variable from the technical content to my query?
Best regards,
TMV

Hi Pank,
For all the Queries/Workbooks for which you want to collect Stats and see them in Reports, you have to activate or mark them/relevant Infoproviders in Datawarehousing Workbench.Tools> BI Statistics Settings.
For the new statistics, you have to determine the objects for which you want to update the statistics and to what level of detail. You call this dialog from the Data Warehousing Workbench. It has changed completely from the previous statistics functionality.
In addition, you can manually assign a priority to the queries, InfoProviders and process chains. This priority is evaluated in the statistics. This can be used to establish a ranking or to exclude objects from the display in a report.
Please search in SAP Help, you will get more stuff.
http://help.sap.com/saphelp_nw70/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ef/372242c4e05033e10000000a155106/frameset.htm
Thanks
CK

Technical content ** NW 2004s ** Please help

Hi,
When i check the reports of the technical content, i can only see the the Techcnical name of the Info Package.
Even if i choose display as " Key & Text " still unable to see the Ipak descreption in the report.
I have checked old 3.X statistics, i think, its the same issue there aswell.
Please help.
Thanks,
Nisha

Hi Srilatha,
I have applied the SAP Note 1088038 and tried loading 0tctprcsvar_text.
When i have checked in PSA, i can see the descreption of the Ipak.
But, if i maintain the master data and see that, the long descreption is blank.
Its not getting populated.
Please advise.
Thanks,
Nisha

Aggregates on Technical Content

Similar Messages

Maybe you are looking for