Ago Function with multiple Facts

Hi,
I have two fact tables that are coneccted to the same time dimension. One of this fact has a column that uses the AGO function. In Answers when I select the column with the function and any other from the other fact, I get the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: Ago(VAL_PUBLICIDADE:[DAggr(F_PUBLICIDADE_MENSAL.VAL_PUBLICIDADE by [ D_CANAL.COD_CANAL, D_CANAL.NOME_CANAL, D_TEMPO_MES.Mes, D_TEMPO_MES.Ano, F_PUBLICIDADE_OBJECTIVOS.VALOR_BRUTO_OBJECTIVO] )], [Level Ano], 1). Please fix the metadata consistency warnings. (HY000)
The metadata is consistent, there are no errors on the Administrator... Is it possible to do?

Hi,
The problem is that I only know the offset values at row level, i.e., when I run my answer report some records use a certain offset value (offset1) while others use another offset value (offset2)
The offset value can be determinate by a logical column.
Is it possible?
Thanks.

Similar Messages

How can I use AGO function with aggregates

I use aggregated table and a detailed table
I have time hierarchy whose lowest level is date. For sales I
created year-to-year (YTD) comparision with AGO function. It
works OK.
BUT, I want to speed it up, so I used aggregates. I created new
time table grouped by MONTH and corresponding agg_SALES table. I
created connections and mapped the fields. It works OK for
normal queries, that means my queries at month level use
aggregates. BUT when I add YTD measures or YAGO measure in query, it goes to
then SALES table whose grain is date.
How can I force BI Server to use AGO function with aggregates?
I use OBIEE 10.1.3.4
Thank you
Ishaq
(Question originally taken from ITtoolbox and posted by Gorazd)
SORRY - THE QUESTION IS IN THE WRONG FORUM
Edited by: ishaq12 on Nov 19, 2008 12:21 PM

Hi,
you can not do it in Administration tool but you can set agregation for that field in Answers (fx->Agregation rule->Sum) and effect should be the same. Note that it may not work properly on Oracle 10g as generated SQL is not 100% recognized, on 11g everything is OK (at least in my case).
Regards,
Marko
Edited by: user10449532 on 2008.11.19 06:29

Using AGO function with partitions

I have a situation where we have logical sources with the same repository folder that are partitioned. We would like to use the AGO function but are getting the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 22042] AGO function may not be used on '# Applied Invoices' because its source is horizontally partitioned. (HY000)
Has anyone had success using the AGO function with partitions? If not, do you have an alternate solution to the problem?

AGO doesn't work with partitions - it's documented on metalink....there's an enhancement request , but that's it - no work-around provided....I'd suggest creating a common view for that particular report

How can build BMM with multiple fact tables

HI Gurus,
I have 4 fact tables and 18 Dimension table. Dimension tables have links with multiple fact tables. i have created physical joins in Physical layer. Now my questions is how can i create Business Model with multiple fact tables.
i mean should i create 4 fact tables as logical tables and logical keys ? Then i have to move all dimension tables in to Business model?
i am new to OBIEE. i gone through tutorial it is showing with one fact and multi dimension table. Should i do follow same style with multi fact tables.
Please help me. Thanks in advance for your support.

Thanks for your response.
I had drag all tables from the phisical layer to Business Model. then i have deleted all links and recreated complex joins with default values.
now i have some revenue amont columns in fact tables.
my question is should i should i create aggregation ( like Sum..) for those columns? is it must ?
please let me know thank you very much

Joins with multiple fact tables

Hi Experts,
i have one doubt in joins
we have two dimensions D1 and D2,
D1 is having A1 and A2 columns
D2 is having B1 and B2 columns
two facts F1 and F2 these are joined like D1 to F1 D1 to F2 and D2 to F1, D2 to F2
D1----->F1
D1------>F2
D2-------->F1
D2-------->F2
if i selected A1 and B1 in a request from which FACT table will get the data and why can you please explain
please help me
reg,
Jell

Hi All,
I have a similar requirement where I have 4 multiple fact tables and we can't combine all those facts into one single fact table. In that case how can a query work with multiple common and uncommon dimensions and measures from multiple fact tables, if it doesn't work that way - can you please explain how can we expect a query to work with multiple fact tables.
For eg: D1– Dim
D2 – Dim
D3 – Dim
D4 – Dim
F1 –Fact
F2 – Fact
F3 – Fact
D1 -> F1
D2 -> F1,F2
D3 -> F2
D4 -> F1, F3
In this case if we want to query from D1,D2,D3, F1, F2 or D1,D2,D3,D4,F1,F2,F3. Kindly please explain how it can be modeled in BMM or what are the limitations. I have done with two fact tables in past and didn't had issues but this is kind of a vast implementation. Your help is appreciated.

Ago function with offset parameter dynamic

Hi,
I need to calculate a measure in rpd or answer that simulate the behavior of ago function with the offset parameter dynamic.
i.e.
ago(total_quantity, month, offset), where offset is a number provided by a logical column.
Is it possible?
Thanks.

Hi,
The problem is that I only know the offset values at row level, i.e., when I run my answer report some records use a certain offset value (offset1) while others use another offset value (offset2)
The offset value can be determinate by a logical column.
Is it possible?
Thanks.

Ago function with two dates

I use OBIEE and I got some difficulties with the times dimensions and the function AGO because I used two differents dates for my measure.
My fact table:
Ordered ||Delivered||Amount
12/21/2008 ||1/20/2009||30000
1/1/2009 ||2/1/2009 ||20000
1/1/2009 ||3/1/2009 ||10000
2/1/2009 ||2/1/2009 ||50000
2/1/2009 ||3/1/2009 ||50000
12/25/2009||1/15/2010||10000
1/1/2010 ||2/1/2010 ||25000
1/1/2010 ||3/1/2010 ||20000
1/1/2010 ||2/1/2010 ||20000
1/1/2010 ||3/1/2010 ||15000
I have two Times Dimensions (Ordered Times AND Delivered Times) and one fact table. I already tried with 2 facts table and 1 time table without success too cause they not link the value for delivered and ordered
I want to compare the delivered situation (Amount Qty) for the same ordered day last year
I created a prompt with a date (ex.: Ordered date <=1/1/2010 AND Delivered date >=1/1/2010) and I want to compare one year ago with 1/1/2009 (Ordered Date situation…)
I wish the results below:
Delivered Month||Amount||Previous Amount Year Ago
1 || 10000 || 30000
2 || 45000 || 20000
3 || 35000 || 10000
I got some problem cause I had the 100 000 in my previous year (Ago) and I don’t want it because it was ordered after 1/1/2009 (Previous year). I know that the ago function concerns the Sum of Amount by Delivered Date, Year -1 ...
Does somebody has a solution for this ? Thank you

Hi,
The problem is that I only know the offset values at row level, i.e., when I run my answer report some records use a certain offset value (offset1) while others use another offset value (offset2)
The offset value can be determinate by a logical column.
Is it possible?
Thanks.

AGO functions with diferent time attibutes

i have problem! i have too columns Year ago and month ago. When i take these columns with Month i can see only results from Month Ago (Year ago is no results), but when i take year and year ago i can see results from year ago. How can ia see year ago results with month column?????
My Ago functions :
Month ago: Ago("RU"."FSG fact - Budget"."Budget sum" , "RU"."WH Dim - TimeDim"."period" , 1) period is like (2008.01; 2010.02; ....)
Year ago: Ago("RU"."FSG fact - Budget"."Budget sum" , "RU"."WH Dim - TimeDim"."Year" , 1) year is like (2008; 2010;....)
please help !!!!!

For Month_Ago column i set level Period and for Year_Ago level Year! but i still get problem - when i take fact column with MonthAgo and YearAgo columns and Month column from time dimension, MonthAgo works fine, but YearAgo shows '0' in all months and in the end of table after last moth shows all sum by year !
and i have also Time dimension made from 2 Logical source tables!
when i use grand total level i get error massege:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22047] The Dimension used in Ago function must be referenced in the query. (HY000)

Ago function with full past year

I want to create an ago function. But if the ago function is for the full past year and not only for the same current period.
Example:
Period ||YEAR || Amount
1 || 2008 || 10
2 || 2008 || 10
3 || 2008 || 10
4 || 2008 || 10
5 || 2008 || 10
6 || 2008 || 10
7 || 2008 || 10
8 || 2008 || 10
9 || 2008 || 10
10 || 2008 || 10
11 || 2008 || 10
12 || 2008 || 10
1 || 2009 || 5
2 || 2009 || 5
3 || 2009 || 5
4 || 2009 || 5
Report for year 2009 period 4 should be
YEAR || TODATE || AGO
2009 || 20 || *120*
Does somebody has a solution for the result 120, Thanks

Hi Jim,
In your BMM layer create a duplicate column for the amount and name it as ago.
double click that and make the source expression as AGO(amount, year,-1) like that.. i dont remember the exact synatx. but the point is give the column name for which year ago value needs to be calculated, parameter to be taken into account eg year or month or week and no. of year or month.
and in the aggregate column use sum.
use this column in your report it will give 120.
if it doesn't work please tell us.
Thanks,
karthick

Ago Function with Select Table--HELP!

When my physical layer was setup using all 'Physical Table' types, my time series functions were working.
I had to modify my fact table to be of a 'Select' type (using SQL). When I remap my data, my time series functions fail with the following message:
"[nQSError: 22038] Function AGO requires at least one measure attribute in its first argument."
We have to be able to use select tables with time serious functions--what am I missing!?
Thanks!!

does your new 'select table' contain the same number of columns with same datatypes?
did you restart the services (if developing in online mode- which is not recommended)
Lastly, if all fails,can you create those views on the database rather than in the physical layer?

Using "Save as" functionality with multiple dataproviders

Is there a way to use the <bi:SAVE_AS> command in a web template to save multiple dataproviders in a single analysis in BEx Portfolio? When I don't specify a dataprovider the command doesn't function.
Thanks,
Jason

pod0 --
At the top of your screen for this page,
you will see that you have a "Solved" rating available.
Perhaps you don't know what that means, as it is a new system here.
It seems to be that CyberTaz did actually "Solve" your problem.
By using the Rating System provided by Apple,
you will be actively encouraging finding solutions
and helpful responses throughout these boards.

Importing function with multiple ref cursors in Stored Procedure of Oracle 12c database Using EF6

Hi Good day!
I can able to import function for stored procedure of oracle db and able to add the complex type and get the output but i tried to import the procedure which having two ref cursors and unable to retrieve the column information. Only able to retrieve the
columns of first ref cursor. Please help me to get the result of two ref cursors which acting as out parameters.

Having to ref cursors return mutiple recordsets in an Oracle package is like haveng two resultsets return from a MS SQL Server sparc.
The link may point you in the right direction.
http://www.codeproject.com/Articles/675933/Returning-Multiple-Result-Sets-from-an-Entity-Fram

How to set a forecast function for multiple fact cubes

Hi all!
We have plan and actual cubes divided by year, they're included in a multi-cube, and on top of that multi-cube an aggregation level is made.
On this aggregation level we're trying to implement a forecast planning function. But on the "Associated Parameter Record" tab, in "Historic Data Filter" field I can choose only one infoprovider containing the historical data.
So the function complains that "there's not enough actual data to do forecast" while executing...
Is there any way to make it work with the data model we're using?
Thanks!

hi,
the historic data selection only restrict your base data for the forcast, but you can´t select any targets.
standard forcast function forcast based time characteristic as these are changed generally,
try restricting time or forecast keyfigures
hope it helps
regards
laksh

Event Handlers which trigger functions with multiple arguments

I am playing two video clips back to back. I have a few
things which I need to do in between clips, so what I am doing for
each is adding a handler for VideoEvent.COMPLETE, at which time i
want to call a function which takes multiple arguments, like this:
video.addEventListener(VideoEvent.COMPLETE,
myFunction("1","2","3"));
private function myFunction(var1:String, var2:String,
var3:String):void
video.removeEventListeners(VideoEvent.COMPLETE, myFunction);
I've already figured out that getting rid of event handlers
that trigger anonymous functions is impossible. Please don't tell
me that it's impossible to remove them if functions require more
than 0 arguments...

"muskiemania" <[email protected]> wrote in
message
news:gc0pk0$jfb$[email protected]..
>I am playing two video clips back to back. I have a few
things which I need
>to
> do in between clips, so what I am doing for each is
adding a handler for
> VideoEvent.COMPLETE, at which time i want to call a
function which takes
> multiple arguments, like this:
>
> video.addEventListener(VideoEvent.COMPLETE,
myFunction("1","2","3"));
>
> private function myFunction(var1:String, var2:String,
var3:String):void
> {
> video.removeEventListeners(VideoEvent.COMPLETE,
myFunction);
> }
>
> I've already figured out that getting rid of event
handlers that trigger
> anonymous functions is impossible. Please don't tell me
that it's
> impossible to
> remove them if functions require more than 0
arguments...
Any function that you add via addEventListener should expect
exactly ONE
argument, the event. And 99.958% of the time, you can take
that event
object and figure out exactly what you need to know.
HTH;
Amy

Any ideas on a cleaner way to write this? - run through a function with multiple steps; if any step fails, restart the function from the begining

Basically there are 3 different functions for various "tests"; they each return "1" if the test passes and "0" on failure. A "master" function calls these 3 functions in the desired order and keeps a counter
of tests that pass. The counter has to be 1 to proceed to step 2, has to be 2 to proceed to step 3, and when it's 3 the loop closes.
This approach is giving the expected results, but I was wondering if anyone has ideas on a cleaner approach? What I really wanted to accomplish was to have the 3 tests past in succession and to provide an overall pass and proceed to the next step;
and also to exit the function if any step fails rather than running through each step before trying again. If the script were to for example loop through the 3 tests and wait until each one passes, tests 1 and 2 might pass, but then 3 might fail
a few times and finally pass before the script exits. I did not want to allow for that scenario to count as an overall pass.
Function Test1 {
If PASS Return 1
If FAIL Return 0
Function Test2 {
If PASS Return 1
If FAIL Return 0
Function Test3 {
If PASS Return 1
If FAIL Return 0
Function TestAll
[int]$counter = 0
$Check1 = Test1
If ($check1 -eq 1) {$counter++}
If ($counter -lt 1) {Exit}
Start-Sleep -s 15
$check2 = Test2
If ($check2 -eq 1) {$counter++}
If ($counter -lt 2) {Exit}
Start-Sleep -s 15
$check3 = Test3
If ($check3 -eq 1) {$counter++}
If ($counter -lt 3) {Exit}
Return $counter
Do {$STATUSCOUNT = TestAll}
While ($STATUSCOUNT -lt "3")

This is cleaner:
Function Test1 {
If PASS Return 1
If FAIL Return 0
Function Test2 {
If PASS Return 1
If FAIL Return 0
Function Test3 {
If PASS Return 1
If FAIL Return 0
Function TestAll{
while($true){
while($true){
$counter=0
if(($counter+=Test1) -ne 1){break}
if(($counter+=Test2) -ne 2){break}
if(($counter+=Test2) -ne 3){break}
return
Write-Host ('try again' + $counter) -fore
TestAll
Of course all of your test functions have syntax errors.
\_(ツ)_/

Ago Function with multiple Facts

Similar Messages

Maybe you are looking for