AIA FP 2.4 on SOA suit 10.3.1.4 clustered environment

Hi
I am trying to install the FP on top of my SOA 10.1.3.4 MLR5. This is a clustered environment.
As described, one should install the FP with ant on the admin member, with ant --noconfig FPInstall.xml
But it keeps failng at deploy AIAReadJMSNotificationProcess with ORABPEL-12529
It says it misses some adapters :
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter  was unable to activate the endpoint :{} due to the following reason: ORABPEL-12529
ManagedConnectionFactory problem.
Could not instantiate ManagedConnectionFactory oracle.tip.adapter.jms.JmsManagedConnectionFactory due to:
Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
Loader: oracle.bpel.common:10.1.3
Code-Source: /opt/oracle/product/10.1.3/assoa/bpel/lib/orabpel.jar
Configuration: <code-source> in /opt/oracle/product/10.1.3/assoa/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.
Please make sure the corresponding JCA Resource Adapter has been deployed.
Please correct the reported issue and redeploy the BPEL process.
These adapters are installed in the oc4j_esbdt as the install guide on soa clustering describes, and I think the deployment expects it to be in the oc4j_soa. Am I right? Does anyone know how to overcome these issues?
kind regrds
Michel

Hi Michel,
I found the solution myself
Just manually deploy the adapters in oc4j_soa the same as in oc4j_esbdt, now deployment goes ok.
Please excuse my ignorance. How do you manually deploy the adapters as mentioned above? Please give the details.
Thanks,
Amorsolo

Similar Messages

  • AIA 2.4 installation on SOA suite 10.1.3.4 with Weblogic 9.2 MP3

    Hi
    I am trying to install AIA 2.4 on SOA suite 10.1.3.4 with Weblogic 9.2 MP3.
    I could successfully install SOA suite 10.1.3.4 with Weblogic 9.2 MP3 and applied MLR # 9 Patch as well.
    I am looking for document reference(step by step document) To install AIA 2.4 on weblogic.
    When i used AIA 2.4 installer it was asking for OPMN port/OC4J instance name. Is there any other AIA 2.4 Installer for weblogic server?
    Thanks

    Of course, seeing 2.x I mistakenly thought PIPs as AIA Foundation Pack is now current version of 11gR1. Anybody wishing to install AIA Foundation Pack, especially with WLS should use 11gR1.
    Can you elaborate on the reason you are electing to go with an older version of both AIA Foundtion Pack and SOA Suite?

  • Installing AIA 11g on top of SOA Suite 11g

    I have installed SOA Suite 11g (11.1.1.5) as per Oracle Installation Guide. The installation is successful and SOA Suite 11g is working fine!
    Now I need to installa AIA 11g.
    1) Currently I have Oracle XE database. Do I need to uninstall it and install Oracle 11g DB?
    2) If yes, do I need to uninstall SOA Suite and install it again after DB installation?
    Please advise.
    Thanks

    Its always better to have Oracle 11g database, against XE database.
    You dont need to uninstall the SOA 11g, just make sure you have the Compatible Oracle 11g database version, create the RCU, then you have to point all the JNDI which is available in SOA 11g to new database.
    Check in metalink.oracle.com. You should get a note explaining, about how to change the RCU pointing.
    Thanks,
    Vijay

  • Install AIA 2.5 FP on SOA Suite 11g

    Hi ,
    Can we install AIA Foundation pack 2.5 on SOA Suite 11g?
    Regards,
    Sam

    See the AIA certification at http://www.oracle.com/applications/aia-platform-certifications.pdf Full support of 11g with AIA Foundation Pack is targeted for the next release. 2.5 does allow you to deploy the EOL on 11g, but AIA runs on 10g.

  • Installing AIA FP 2.4 on SOA Suite 10.1.3.4 with Weblogic 9.2 failed

    Hi,
    While Installing AIA FP 2.4 on Weblogic 9.2 using FPWLInstall.xml,
    I got the following Error..
    BUILD FAILED
    D:\AIA_HOME\Infrastructure\install\wlscripts\FPWLInstall.xml:218: The following error occurred while executing this line:
    D:\AIA_HOME\Infrastructure\install\wlscripts\FPWLInstall.xml:226: The following error occurred while executing this line:
    D:\AIA_HOME\Infrastructure\install\wlscripts\FPWLDeployment.xml:17: The following error occurred while executing this line:
    D:\AIA_HOME\Infrastructure\install\wlscripts\FPWLDeployment.xml:29: The following error occurred while executing this line:
    D:\AIA_HOME\Infrastructure\install\wlscripts\FPWLErrorHandlingInstall.xml:140: The following error occurred while executing this line:
    D:\AIA_HOME\Infrastructure\ErrorHandling\AIAReadJMSNotificationProcess\build.xml:209: A problem occured while connecting to server "localhost" using port "9700": bpel_aiareadjmsnotificationprocess_1.0.jar failed to deploy. Exception message is:  Could not initialize activation agent.
    An error occured while initializing an activation agent for process "AIAReadJMSNotificationProcess", revision "1.0".
    Please ensure that the activation agents are configured correctly in the bpel deployment descriptor (bpel.xml).
    oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: ORABPEL-12517
    AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
    The Resource Adapter  was unable to activate the endpoint :{} due to the following reason: ORABPEL-12561
    Unable to locate the JCA Resource Adapter via WSDL port element jca:address.
    *The Adapter Framework is unable to startup the Resource Adapter specified in the WSDL jca:address element:  {http://xmlns.oracle.com/pcbpel/wsdl/jca/}address: location='eis/Jms/AIA_ERROR_JMS'*
    The reason for this is most likely that either
    *1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic J2EE Application server or*
    *2) the JNDI location setting in the WebLogic JCA deployment descriptor has not been set to eis/Jms/AIA_ERROR_JMS. In the last case you might have to add a new 'connector-factory' entry (connection) to the deployment descriptor.*
    Please correct this and then restart the BPEL/WebLogic Application Server
    Please correct the reported issue and redeploy the BPEL process.
    Please help.

    pls see http://bit.ly/ozJqoz , in case you have missed some steps.

  • SOA suite composite interdependency

    Hi All,
    I am facing a typical problem. We have AIA FP on top of SOA suite 11g (11.1.1.5). Here when we call a provider ABCS ( a BPEL composite) from EBS (a mediator composite) rather than providing direct endpoint in the reference we refer the concrete WSDL from MDS. The reason is if after restart all EBS composite becomes disabled as it does not find the reference of provider ABCS (in many cases provider ABCS is loaded after EBS).
    This is working quite well for us. But lately I am seeing too many concrete WSDL are loaded in MDS. Where contents are same only endpoints are different.
    What is the best practice of managing this? is there any way we can manage the composite loading order during server restart?
    Regards

    Hi,
    The best practice is to keep the abstract WSDLs in MDS.
    During design time( while creating the EBS in jDeveloper ), refer the WSDL in MDS rather tha giving the endpoint directly.
    In composite.xml, give the actual endpoint.
    Find and example as below in composite.xml of an EBS where the provider name is InvokeIRUSyncProjectListPrimeveraProvABCS( The bold one is actual endpoint and the italic one is the one in MDS).
    <reference name="InvokeIRUSyncProjectListPrimeveraProvABCS"
    ui:wsdlLocation="+oramds:/apps/KACST/AIA/WSDL/ABCS/PRIMAVERA/IRUSyncProjectListP6ProvABCSImpl.wsdl+">
    <interface.wsdl interface="http://xmlns.oracle.com/ABCSImpl/P6/Core/IRUSyncProjectListP6ProvABCSImpl/V1.0#wsdl.interface(IRUSyncProjectListP6ProvABCSImpl)"/>
    <binding.ws port="http://xmlns.oracle.com/ABCSImpl/P6/Core/IRUSyncProjectListP6ProvABCSImpl/V1.0#wsdl.endpoint(IRUSyncProjectListP6ProvABCSImpl/IRUSyncProjectListP6ProvABCSImpl_pt)"
    location="*http://taisirsit.kacst.edu.sa:8001/soa-infra/services/aia-abcs-P6/IRUSyncProjectListP6ProvABCSImpl/IRUSyncProjectListP6ProvABCSImpl?WSDL*"
    soapVersion="1.1">
    <property name="weblogic.wsee.wsat.transaction.flowOption"
    type="xs:string" many="false">WSDLDriven</property>
    </binding.ws>
    </reference>
    If u follow the process above, there will be no problem during restart of servers.
    Kindly note that always keep the ABSTRACT wsdl in MDS rather than concrete one

  • Oracle SOA Suite vs oracle Application Integration Architecture

    HI,
    Oracle soa suite provides the environment to make use of existing service by providing oracle adapters including Legacy,package and application adapters. futher which suituation and why need to use oracle AIA in order to make use existing resources. am little bit confuse both of this approach over integration.
    can anyone clear my doubt
    regards
    ashok.v

    when your integration is for integrating standard applications such as EBusiness uite,Siebel,SAP,Fusion Apps etc.For those application either the standard PIPs are available or at least industry specific or application specific EBOs are delivered by Oracle,then you can go for AIA.
    For small integrations SOA suite is sufficient.

  • Deployment / Configuration Scenarios for SOA Suite

    Probably this should be posted in the Fusion 11g Middleware thread, but I am looking for information on how an installation of SOA Suite 11g would look like.
    I have have the following requirements:
    - A development environment that supports 3 parallel projects.
    - A testing environment that supports integration testing.
    - A production environment.
    First I was thinking about a single SOA Suite installation per project & environment (5). But then I thought Domains and Managed Servers - everything can go into a single SOA Suite with seperation on Domains.
    Is there anywhere I can get som architecture overview for how a typical SOA Suite is installed in a working environment that supports multiple projects, integration testing and finally production?
    Thanks in advance,
    Eamonn J.

    see :
    http://yuanmengblog.blogspot.nl/2012/02/soa-deployment-plan-with-jca-properties.html
    http://www.albinsblog.com/2012/10/exploring-deployment-plan-file-to.html#.UHKS0E0xp4o

  • Different WAR File for OSB and SOA Load Balancers on  Clustered Environment

    Hi,
    Do we need different proxyapp.war Files for each Load Balancer of SOA and OSB Respectively on a Clustered Environment?
    Thanks in Advance.

    Hi,
    Yes you need to have different .war file placed different server to have multiple load balancers.
    Regards,
    Kal

  • Issue in SOA Suite Installation - prerequisite for AIA 3.0 Installation

    We are facing an issue in SOA Suite Installation which is prerequisite for AIA 3.0 Installation. As per AIA 3.0 Installation Guide, the Web Logic Server version to be used is “Web Logic Server 11g R1 10.3.1“ for Linux86 32bit Version.
    After Installation of SOA Suite on Linux Environment, the em console page is not opening.
    Error Message :
    <Feb 1, 2010 5:21:50 PM IST> <Warning> <Connector> <BEA-190110> <Resource Adapter is calling BootstrapContext.createTimer() and allocating a Timer Thread that is not managed by WebLogic Server. This may adversely impact the performance/operation of WebLogic Server.>
    <Feb 1, 2010 5:21:50 PM IST> <Warning> <J2EE> <BEA-160140> <Unresolved optionalpackage references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.soa.fabric, Specification-Version: 11.1.1, Implementation-Version: 11.1.1, referenced from: /app/oracle/weblogic/user_projects/domains/SOADomain/servers/soa_server1/tmp/_WL_user/worklistapp/r8n7fr]. Make sure the referenced optional package has beendeployed as a library.>
    <Feb 1, 2010 5:21:50 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'worklistapp' due to error java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;.
    We have faced such issue during SOA 11g Installation on Windows Operating System, and installed latest version of Web logic Server and the issue was resolved.
    Can AIA Linux Installable work on Web Logic Server 11g R1 10.3.2?
    If any one has faced similar issues, Kindly provide inputs.

    The same person has reported issues on further steps i.e. AIA Installation. Hence closing this

  • How to install AIA in Oracle SOA Suite 11.1.1.5.0

    Hi,
    I have installed Oracle SOA Suite 11.1.1.5.0. It works fine . Now I want to install AIA Foundation Pack on this . How to do that ? Which AIA version I need to download ? and what are the steps that I have to follow to make AIA works on it .
    Thanks

    As per the certification matrix at http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html --> Oracle Fusion Middleware 11g Release 1 (11.1.1.x) -->System Requirements and Supported Platforms for Oracle Fusion Middleware 11gR1 --> Download the xls file --> On sheet FMW on WLS - System you should be able to see AIA FP and SOA certified combinations.
    To download the installer goto - http://www.oracle.com/technetwork/middleware/foundation-pack/downloads/index.html --> Release 11gR1 (11.1.1.5.0) --> Select the platform and expand Prerequisites & Recommended Install Process.
    You should be able to gather all the required information from here.
    Hope it helps!

  • Is BSR comes with Soa Suite 10.1.3.1 or 10.1.3.3 Patch or AIA FP or Apserv?

    At what level of installing .. BSR available for using ?
    Application Server
    or
    Soa Suite 10.1.3.1
    or
    Upgrade Soa Suite from 10.1.3.1 to 10.1.3.3 By applying 10.1.3.3 Patch
    or
    AIA Foundation Pack
    Edited by: sridhar rachumallu on Nov 22, 2008 11:15 PM

    AIA Foundation Pack

  • AIA on Oracle SOA Suite 11g

    Hi ,
    Is it possible to install AIA 2.5 Foundation pack on Oracle SOA Suite 11g.
    Can you please share any oracle documentation in this regard?
    Regards,
    Sam

    AIA 2.5 is only running on Oracle 10g. AIA version 3.0 wil be certified against 11g, this version is in the pipeline.
    Marc
    http://orasoa.blogspot.com

  • How does Oracle AIA pull details from SOA Suite on installation?

    Quite urgent help:
    How does Oracle AIA pull details from SOA Suite during installation?
    We're encountering an issue with installation of Oracle AIA at step 4. This when providing the SOA Server Details, and the managed server shows:
    "Cannot Connect to Server" error.
    However at the weblogic console, the Admin server and manage server: soa_server1 are running. Please provide us help on this.
    For further details, here are the apps and versions we installed:
    * Oracle Fusion Middleware 11g
    * SOA suite
    * Oracle AIA 11g
    * Weblogic 10.3.4.0
    Thanks!
    -tristan
    Edited by: user8089513 on May 16, 2011 4:58 AM

    Hello,
    Thanks for the reply!
    On my end, i haven't started it yet today, it just leads me to this message when running node manager:
    +<May 17, 2011 3:40:51 PM GMT+08:00> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>+
    +<May 17, 2011 3:40:52 PM> <INFO> <Secure socket listener started on port 5556, host /10.234.182.26>+
    May 17, 2011 3:40:52 PM weblogic.nodemanager.server.SSLListener run
    INFO: Secure socket listener started on port 5556, host /10.234.182.26
    Should you need to check the nodemanager.properties, here are the details:
    #Fri May 13 10:56:04 GMT+08:00 2011
    DomainsFile=C\:\\Oracle\\MIDDLE~1\\WLSERV~1.3\\common\\NODEMA~1\\nodemanager.domains
    LogLimit=0
    PropertiesVersion=10.3
    DomainsDirRemoteSharingEnabled=false
    #javaHome=C\:\\Oracle\\MIDDLE~1\\JROCKI~1.1-3
    #JavaHome=C\:\\Oracle\\MIDDLE~1\\JROCKI~1.1-3\\jre
    JavaHome=C\:\\Oracle\\MIDDLE~1\\JDK160~21\\jre
    javaHome=C\:\\Oracle\\MIDDLE~1\\JDK160~21
    AuthenticationEnabled=true
    NodeManagerHome=C\:\\Oracle\\MIDDLE~1\\WLSERV~1.3\\common\\NODEMA~1
    LogLevel=INFO
    DomainsFileEnabled=true
    StartScriptName=startWebLogic.cmd
    ListenAddress=10.234.182.26
    NativeVersionEnabled=true
    ListenPort=5556
    LogToStderr=true
    SecureListener=true
    LogCount=1
    DomainRegistrationEnabled=false
    StopScriptEnabled=true
    QuitEnabled=false
    LogAppend=true
    StateCheckInterval=500
    CrashRecoveryEnabled=false
    StartScriptEnabled=true
    LogFile=C\:\\Oracle\\MIDDLE~1\\WLSERV~1.3\\common\\NODEMA~1\\nodemanager.log
    LogFormatter=weblogic.nodemanager.server.LogFormatter
    ListenBacklog=50
    When I check the weblogic console, i manually run the managed server using startManagedWebLogic.cmd.
    Please advise. Do really need help on this.
    Thanks!
    -tristan

  • Oracle SOA Suite Adapter integration vs Oracle AIA

    HI,
    Oracle soa suite provides the environment to make use of existing service by providing oracle adapters including Legacy,package and application adapters. futher which suituation and why need to use oracle AIA in order to make use existing resources. am little bit confuse both of this approach over integration.
    can anyone clear my doubt
    regards
    ashok.v

    http://blogs.oracle.com/aia/2008/12/do_i_really_need_aia.html
    http://www.slideshare.net/OTNArchbeat/business-process-optimization-with-enterprise-soa-and-aia
    Regards,
    Anuj

Maybe you are looking for