AIA Installation -  Prerequisites checking problem

Hi,
AIA Installer Prerequisites checking:
It's asking for packages that do not exist in RHEL5 repository.
Checking for openmotif21-2.1.30-11.RHEL4.4; openmotif21-2.1.30-11.EL5-i386. Failed <<<<
Checking for gnome-libs-1:1.4.1.2.90-44.1; Not found. Failed <<<<
Checking for xscreensaver-4.18-5.rhel4.2; Not found. Failed <<<<
As you can see, I have openmotif21-2.1.30-11.EL5-i386 installed (downloaded from Oracle).
Looks like it is checking against RHEL4 prerequisites, but this is RHEL5.
Is it safe to ignore these?
Best,
Ali

Hi Ali,
yes, i think you can ignore these warnings. We successfully install AIA with the same warnings.
Greetings from germany,
Marcel

Similar Messages

  • Oracle 11GR2 installation Prerequsite check - IZ42940 failed

    Oracle 11GR2 installation Prerequisite check fails with the following:
    OS PATCH : IZ42940 failed
    OS PATCH : IZ49516 failed
    OS PATCH : IZ52331 failed
    I have AIX 5.3 level with the patch level as below:-
    oslevel -s
    5300-12-02-1036
    If I check at OS , I get
    /usr/sbin/instfix -i -k "IZ42940 IZ49516 IZ52331"
    there was no data for IZ42940 in the fix database
    there was no data for IZ49516 in the fix database
    there was no data for IZ52331 in the  fix database
    I have checked the latest AIX patch in media, which I am using, doesnu2019t contain these fixes IZ42940 , IZ49516 and IZ52331.
    I am just wondering how do I install these fixes IZ42940 , IZ49516 and IZ52331,
    Please help,

    Hello Abu,
    I am just wondering how do I install these fixes IZ42940 , IZ49516 and IZ52331
    The fix-numbers are only valid for one AIX TL - this means if the installer was released with TL 05 (for example) .. you will get this message if you are using TL 12 now, because of the fix numbers have changed.
    The only way to verify it is to go to the following IBM page and check the fix numbers for your TL.
    In your cases:
    IZ42940 - https://www-304.ibm.com/support/docview.wss?uid=isg1fixinfo110763
    IZ49516 - https://www-304.ibm.com/support/docview.wss?uid=isg1fixinfo112964
    IZ52331- https://www-304.ibm.com/support/docview.wss?uid=isg1fixinfo115020
    If your AIX TL level is not mentioned in these pages ... just take the previous TL Fix number and check for this.
    Regards
    Stefan

  • SAPINST ERROR -- PREREQUISITE CHECKER

    Hi Experts,
    I have an issue running SapInst wich I can´t find a solution.
    My Operative System is Windows Server X64 (English) but this message appears:
    "Make sure that the English language pack is installed on your operating system so that your support requests can be handled quickly"
    Any clue?
    Regards.

    Hello Jorge,
    I also got this issue when I tried to install a Netweaver ABAP. I just ignored it, my OS was also in english.
    However, you may try to update the prerequisite checker as described in note 855498 and check if the issue is solved.
           855498     - Installation Prerequisite Checker
    Kind Regards,
    Allam Drebes

  • Oracle 11g R2 client installation on Windows 7 64 bit hangs after performing prerequisite checks

    Windows 7 Professional SP1 64bit OS
    6 GB RAM
    380 GB free space
    Extracted client to C:\Stage\win64_11gR2_client\client
    Ran setup.exe as administrator, but the installation always hangs after step 5 of 7 is completed (Perform Prerequisite checks). Install log ends with entry "INFO: Get view named [SummaryUI]"
    What am I missing here? Any help would be greatly appreciated.
    C:\Stage\win64_11gR2_client\client>dir
    Directory of C:\Stage\win64_11gR2_client\client
    06/15/2013  02:56 PM    <DIR>          .
    06/15/2013  02:56 PM    <DIR>          ..
    06/15/2013  02:56 PM    <DIR>          doc
    06/15/2013  02:56 PM    <DIR>          install
    06/15/2013  02:56 PM    <DIR>          response
    06/15/2013  02:55 PM           341,304 setup.exe
    06/15/2013  02:55 PM                56 setup.ini
    06/15/2013  02:59 PM    <DIR>          stage
    06/15/2013  02:55 PM             4,327 welcome.html
                   3 File(s)        345,687 bytes
                   6 Dir(s)  412,474,404,864 bytes free
    Last few lines of install log:
    WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
    WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
    INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@75f0f8ff
    INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
    INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
    INFO: Loading view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
    INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state getOracleHome
    INFO: Completed executing action at state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <getOracleHome>
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <getOracleHome>
    INFO: Completed validating view at state <getOracleHome>
    INFO: Validating state <getOracleHome>
    INFO: custom prereq file name: oracle.client_Administrator.xml
    INFO: refDataFile: C:\Stage\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: InstallAreaControl exists: false
    INFO: Checking:NEW_HOME
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:ORCA_HOME
    INFO: Reading shiphome metadata from c:\Stage\win64_11gR2_client\client\install\..\stage\shiphomeproperties.xml
    INFO: Loading beanstore from file:/c:/Stage/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
    INFO: Translating external format into raw format
    INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/c:/Stage/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: size estimation for Administratorinstall is 1068.0003070831299
    INFO: PATH has :==>C:\Temp\OraInstall2013-06-17_02-55-15PM\jdk\jre\bin;.;C:\windows\system32;C:\windows;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;C:\APPS\PuTTY\;C:\Program Files (x86)\IDM Computer Solutions\UltraEdit\
    INFO: Completed validating state <getOracleHome>
    INFO: InstallLocationAction to INVENTORY_NO
    INFO: Verifying route INVENTORY_NO
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state prereqExecutionDecider
    INFO: Completed executing action at state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <prereqExecutionDecider>
    INFO: Completed validating view at state <prereqExecutionDecider>
    INFO: Validating state <prereqExecutionDecider>
    WARNING: Validation disabled for the state prereqExecutionDecider
    INFO: Completed validating state <prereqExecutionDecider>
    INFO: Verifying route executeprereqs
    INFO: Get view named [PrereqUI]
    INFO: View for [PrereqUI] is [email protected]e4b
    INFO: Initializing view <PrereqUI> at state <checkPrereqs>
    INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
    INFO: Displaying view <PrereqUI> at state <checkPrereqs>
    INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
    INFO: Loading view <PrereqUI> at state <checkPrereqs>
    INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
    INFO: Localizing view <PrereqUI> at state <checkPrereqs>
    INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state checkPrereqs
    INFO: custom prereq file name: oracle.client_Administrator.xml
    INFO: refDataFile: C:\Stage\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: Completed executing action at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state checkPrereqs
    INFO: Waiting for completion all forked tasks at state checkPrereqs
    INFO: Creating PrereqChecker Job for leaf task Physical Memory
    INFO: Creating CompositePrereqChecker Job for container task Free Space
    INFO: Creating PrereqChecker Job for leaf task Free Space: PN-PC:C:\Temp
    INFO: Creating PrereqChecker Job for leaf task Architecture
    INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
    INFO: CVU tracingEnabled = false
    INFO: Nodes are prepared for verification.
    INFO: *********************************************
    INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:PN-PC
    INFO: Expected Value:128MB (131072.0KB)
    INFO: Actual Value:5.9491GB (6238064.0KB)
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Free Space: PN-PC:C:\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:PN-PC
    INFO: Expected Value:130MB
    INFO: Actual Value:384.1495GB
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:PN-PC
    INFO: Expected Value:64-bit
    INFO: Actual Value:64-bit
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:PN-PC
    INFO: Expected Value:1023
    INFO: Actual Value:369
    INFO: -----------------------------------------------
    INFO: All forked task are completed at state checkPrereqs
    INFO: Completed background operations
    INFO: Moved to state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <checkPrereqs>
    INFO: Completed validating view at state <checkPrereqs>
    INFO: Validating state <checkPrereqs>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
    INFO: Completed validating state <checkPrereqs>
    INFO: Verifying route success
    INFO: Get view named [SummaryUI]

    Yes, I've tried using the -jreLoc option but it doesn't seem to like the path.
    Version 6.0.200.2 is at C:\Program Files (x86)\Java\jre6\bin
    C:\Stage\win64_11gR2_client\client>setup.exe -jreLoc "C:\Program Files (x86)\Java\jre6"
    Starting Oracle Universal Installer...
    Checking monitor: must be configured to display at least 256 colors Higher than 256 .    Actual 4294967296     Passed
    Preparing to launch Oracle Universal Installer from C:\Temp\OraInstall2013-06-17_04-47-16PM. Please wait ...
    The Java RunTime Environment was not found at "C:\Program Files (x86)\Java\jre6"\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
    Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again
    I downloaded a newer version to C:\APPS\Java thinking the space in the path for Program Files (x86) might be a problem, but that also fails with the same error message
    Version 7.0.210.11 is at C:\APPS\Java\bin
    C:\Stage\win64_11gR2_client\client>setup.exe -jreLoc "C:\APPS\Java\"
    Starting Oracle Universal Installer...
    Checking monitor: must be configured to display at least 256 colors Higher than 256 .    Actual 4294967296     Passed
    Preparing to launch Oracle Universal Installer from C:\Temp\OraInstall2013-06-17_05-09-13PM. Please wait ...
    The Java RunTime Environment was not found at C:APPS\Java"\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
    Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again

  • Prerequisite checking issue during obiee 11g installation in windows server 2012

    HI..
    Currently i'm facing problem while installing obiee 11g(11.1.1.7.0) in windows server 2012 and the database we're using is ms sql server 10.3 version. During the prerequisite checks while installation it shows the error "Checking Operating system certification" status "failed"..
    can someone provide help to solve this issue..
    Thanks,

    HI..
    Currently i'm facing problem while installing obiee 11g(11.1.1.7.0) in windows server 2012 and the database we're using is ms sql server 10.3 version. During the prerequisite checks while installation it shows the error "Checking Operating system certification" status "failed"..
    can someone provide help to solve this issue..
    Thanks,

  • Issue in SOA Suite Installation - prerequisite for AIA 3.0 Installation

    We are facing an issue in SOA Suite Installation which is prerequisite for AIA 3.0 Installation. As per AIA 3.0 Installation Guide, the Web Logic Server version to be used is “Web Logic Server 11g R1 10.3.1“ for Linux86 32bit Version.
    After Installation of SOA Suite on Linux Environment, the em console page is not opening.
    Error Message :
    <Feb 1, 2010 5:21:50 PM IST> <Warning> <Connector> <BEA-190110> <Resource Adapter is calling BootstrapContext.createTimer() and allocating a Timer Thread that is not managed by WebLogic Server. This may adversely impact the performance/operation of WebLogic Server.>
    <Feb 1, 2010 5:21:50 PM IST> <Warning> <J2EE> <BEA-160140> <Unresolved optionalpackage references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.soa.fabric, Specification-Version: 11.1.1, Implementation-Version: 11.1.1, referenced from: /app/oracle/weblogic/user_projects/domains/SOADomain/servers/soa_server1/tmp/_WL_user/worklistapp/r8n7fr]. Make sure the referenced optional package has beendeployed as a library.>
    <Feb 1, 2010 5:21:50 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'worklistapp' due to error java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;.
    We have faced such issue during SOA 11g Installation on Windows Operating System, and installed latest version of Web logic Server and the issue was resolved.
    Can AIA Linux Installable work on Web Logic Server 11g R1 10.3.2?
    If any one has faced similar issues, Kindly provide inputs.

    The same person has reported issues on further steps i.e. AIA Installation. Hence closing this

  • Prerequisite check of database instance installation failed on Solaris

    Dear All,
    Please provide your valuable suggestions in resolving the below issue
    We are installing the SAP NW 7.4 EP as distributed installation
    Application server on RHEL 6 and Oracle database on Solaris 11(SPARC).
    We have installed the SCS instance on RHEL  with out any issues.
    While running prerequisite check of database installation on solaris we are getting below errors.
    "Atleast 500MB of free disk space are required for an diagnostic agent installation"
                     and
    "could not evaluate condition obsolete kernel parameters"
    In the sapinstdev_log file we are getting below lines.
    TRACE     
    Found 0 MB of free space on /dev
    TRACE     
    Prerequisite Checker performing checks: Condition hardware::disk_space from package ::j2ee_smd_inst evaluated to PRCCondEvalResult.FALSE. Message: 'At least 500 MB of free disk space are required for an Diagnostics Agent installation. Found 0 GB.'.
    We have tried to increase space for /dev which is not possible in Solaris (As per the OS team).please find the below reference link.
    /dev and the /devices Namespace (System Administration Guide: Oracle Solaris Containers-Resource Management and Oracle S…
    The/dev file system is loopback-mounted into the zone using a read-only mount.
    Please find the file system created for database instance installation.
    Filesystem             Size   Used  Available Capacity  Mounted on
    rpool/ROOT/solaris      29G   973M        28G     4%    /
    /dev                     0K     0K         0K     0%    /dev
    rpool/ROOT/solaris/var
                            29G    49M        28G     1%    /var
    proc                     0K     0K         0K     0%    /proc
    ctfs                     0K     0K         0K     0%    /system/contract
    mnttab                   0K     0K         0K     0%    /etc/mnttab
    objfs                    0K     0K         0K     0%    /system/object
    swap                    30G   1.5G        29G     5%    /system/volatile
    sharefs                  0K     0K         0K     0%    /etc/dfs/sharetab
    fd                       0K     0K         0K     0%    /dev/fd
    swap                    30G   1.5G        29G     5%    /tmp
    rpool/VARSHARE          29G    40K        28G     1%    /var/share
    h2hpool1/Dump           40G   9.2G        31G    23%    /Dump
    rpool/export            29G    32K        28G     1%    /export
    rpool/export/home       29G    32K        28G     1%    /export/home
    rpool/export/home/admin
                            29G    34K        28G     1%    /export/home/admin
    h2hpool1               244G    31K       235G     1%    /h2hpool1
    h2hpool1/oracle        180G    36K       180G     1%    /oracle
    h2hpool1/oracle/EPD    180G    44K       180G     1%    /oracle/EPD
    h2hpool1/oracle/EPD/112_64
                            10G    31K        10G     1%    /oracle/EPD/112_64
    h2hpool1/oracle/EPD/mirrlogA
                           1.0G    31K       1.0G     1%    /oracle/EPD/mirrlogA
    h2hpool1/oracle/EPD/mirrlogB
                           1.0G    31K       1.0G     1%    /oracle/EPD/mirrlogB
    h2hpool1/oracle/EPD/oraarch
                            20G    31K        20G     1%    /oracle/EPD/oraarch
    h2hpool1/oracle/EPD/origlogA
                           1.0G    31K       1.0G     1%    /oracle/EPD/origlogA
    h2hpool1/oracle/EPD/origlogB
                           1.0G    31K       1.0G     1%    /oracle/EPD/origlogB
    h2hpool1/oracle/EPD/sapdata1
                            30G    31K        30G     1%    /oracle/EPD/sapdata1
    h2hpool1/oracle/EPD/sapdata2
                            30G    31K        30G     1%    /oracle/EPD/sapdata2
    h2hpool1/oracle/EPD/sapdata3
                            30G    31K        30G     1%    /oracle/EPD/sapdata3
    h2hpool1/oracle/EPD/sapdata4
                            30G    31K        30G     1%    /oracle/EPD/sapdata4
    h2hpool1/oracle/EPD/sapreorg
                           2.0G    31K       2.0G     1%    /oracle/EPD/sapreorg
    h2hpool1/oracle/client
                           1.0G    31K       1.0G     1%    /oracle/client
    h2hpool1/oracle/stage
                           5.0G    31K       5.0G     1%    /oracle/stage/112_64
    rpool                   29G    31K        28G     1%    /rpool
    h2hpool1/sapmnt         20G    31K        20G     1%    /sapmnt
    h2hpool1/usr            20G    31K        20G     1%    /usr/sap

    Hi Praveen,
    It looks to be more permission issue rather than space issue. Ensure the file system where you copied the DVD has full permission.
    Check the installation logs for more details on which other file system needs full permission and work accordingly.
    Regards,
    Deepak Kori

  • AIA Installation Problem : cwallet.sso access denied

    I am first time user of AIA & trying to install AIA. After 45-mins of run the AIA installer stops & gives below error. I tried to run installer as administrator, Do it has to any thing with java property -Djps.app.credential.overwrite.allowed=true .
    The below file ...........src\META-INF\cwallet.sso (Access is denied) gets created by the Installer & then it gives msg Access Denied.
    oracle.mds.config.MDSConfigurationException: MDS-01330: unable to load MDS configuration document
    MDS-01329: unable to load element "persistence-config"
    MDS-01370: MetadataStore configuration for metadata-store-usage "mstore-usage_2" is invalid.
    MDS-00011: unable to create configuration object or MDSInstance due to invalid configuration information: oracle.mds.exception.MDSException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    MDS-01370: MetadataStore configuration for metadata-store-usage "mstore-usage_3" is invalid.
    MDS-00011: unable to create configuration object or MDSInstance due to invalid configuration information: oracle.mds.exception.MDSException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
         at oracle.mds.config.PConfig.loadFromBean(PConfig.java:690)
         at oracle.mds.config.PConfig.<init>(PConfig.java:499)
         at oracle.mds.config.MDSConfig.loadFromBean(MDSConfig.java:707)
         at oracle.mds.config.MDSConfig.loadFromElement(MDSConfig.java:764)
         at oracle.mds.config.MDSConfig.<init>(MDSConfig.java:515)
         at oracle.mds.config.MDSConfig.<init>(MDSConfig.java:443)
         at oracle.integration.platform.common.MDSUtil.getMDSConfig(MDSUtil.java:42)
         at oracle.integration.platform.common.MDSUtil.getMDSInstance(MDSUtil.java:132)
         at oracle.integration.platform.common.MDSMetadataManagerImpl.getMDSInstance(MDSMetadataManagerImpl.java:660)
         at oracle.integration.platform.common.MDSMetadataManagerImpl.init(MDSMetadataManagerImpl.java:274)
         ... 15 more
    Caused by: oracle.mds.exception.MDSExceptionList: MDS-01329: unable to load element "persistence-config"
    MDS-01370: MetadataStore configuration for metadata-store-usage "mstore-usage_2" is invalid.
    MDS-00011: unable to create configuration object or MDSInstance due to invalid configuration information: oracle.mds.exception.MDSException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    MDS-01370: MetadataStore configuration for metadata-store-usage "mstore-usage_3" is invalid.
    MDS-00011: unable to create configuration object or MDSInstance due to invalid configuration information: oracle.mds.exception.MDSException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
    JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: C:\AIA_HOME_Path\aia_instances\AIA_Inst_1\config\MDSConfig\.adf\META-INF\..\..\src\META-INF\cwallet.sso (Access is denied)
         at oracle.mds.config.PConfig.loadFromBean(PConfig.java:684)
         ... 24 more
    All Help would be highly appreciable.
    Thanks
    Anand Vithalani

    Hi,
    You can try the following work around to your problem :
    before running the installer
    update aiaoneclick.properties under the Disk1/install/win32/win64(depending on OS being 32 bit or 64 bit) folder with the following
    (The tag to be updated already exists you just need to add the detail highlighted )
    aia_deploy_cmd1_win=cmd /c set PATH=mwHome\\modules\\org.apache.ant_1.7.1\\bin;javaHome
    bin;%PATH%&& set CLASSPATH=.;mwHome\\wlserver_10.3\\server\\lib\\weblogic.jar;aiaHome\\lib\\aia.jar;aiaHome\\lib\\aia-utils.jar;mwHome\\modules\\net.sf.antcontrib_1.1.0.0_1-0b2\\lib\\ant-contrib.jar;mwHome\\oracle_common\\modules\\oracle.mds_11.1.1\\mdsrt.jar;mwHome\\oracle_common\\modules\\oracle.jps_11.1.1\\jps-common.jar;mwHome\\oracle_common\\modules\\oracle.jps_11.1.1\\jps-internal.jar;mwHome\\oracle_common\\modules\\oracle.jps_11.1.1\\jps-unsupported-api.jar;mwHome\\oracle_common\\modules\\oracle.pki_11.1.1\\oraclepki.jar;mwHome\\oracle_common\\modules\\oracle.idm_11.1.1\\identitystore.jar;mwHome\\oracle_common\\modules\\oracle.webservices_11.1.1
    oracle.webservices.standalone.client.jar;%CLASSPATH%&&set JAVA_HOME=javaHome&& set ANT_HOME=mwHome\\modules
    org.apache.ant_1.7.1&&set ANT_OPTS=-Xms512M -Xmx1024M -XX:MaxPermSize=512M&& set AIA_HOME=aiaHome&& set SOA_HOME=soaHome&& set MW_HOME=mwHome&& set ORACLE_HOME=oracleHome&& set WEBLOGIC_HOME=mwHome
    wlserver_10.3&& set SystemRoot=systemRoot&& set USERDOMAIN=<Replace with user domain value>&&set USERNAME=<Replace with user executing the OUI>&& cd /d aiaHome\\Infrastructure\\Install
    AID&& ant -f aiaHome\\Infrastructure\\Install\\AID
    AIACreateInstance.xml -DPropertiesFile=aiaInstanceXX\\config
    AIAInstallProperties.xml

  • Oracle grid infrastructure installation take long time on step 15 (perform prerequisite checks )

    Oracle grid infrastructure installation take long time on step 15 (perform prerequisite checks ) 
    I'm starting install and configure Oracle RAC 11gR2 on redhat 6.3 , when i reached step 15 (perform prerequisite checks ) it's taking long time more than 10 hours and still checking .... i closed it and start installation again it's same still waiting in perform prerequisite checks 75% complete
    it is normal ?? what should i do ?? how i can monitoring installation steps and why this step take all this time please help .

    Pl identify which exact version of 11gR2 - currently only 11.2.0.3 is certified/supported on Linux 6.x - Oracle&amp;reg; Database - if you are using 11.2.0.1 or 11.2.0.2, then you will need to use Linux 5.x
    HTH
    Srini

  • AIA Installation Error

    Hi All
    We are trying to installing AIA 2.2 in our systems and we are facing an issue in that. Prior to the AIA installation we have
    1. Upgraded our SOA Suite from 10.1.3.1 to 10.1.3.4 by applying Patch set.
    2. Installed Oracle Service Registry.
    But while installing AIA we are getting this error.
    "The SOA Suite version(10.1.3.1) is not the required version(10.1.3.3)"
    Even though we have upgraded our SOA Suite to higher version I don't know why are we getting this error.
    Any ideas or suggestions to solve this problem?
    Thanks in advance.
    Regards
    Senthil R

    First ensure that SOA is upgraded to 10.1.3.4 .For this open welcome page <hostname>:<port> ,there you can find the version on top left .
    if version number is 10.1.3.3 restart the app server and check again .
    if it is still 10.1.3.3 check oraInventory and opatch lsinventory for patched applied

  • EPM System Installer Prerequisites, 11.1.1.1

    hello,
    I am starting to install version 11.
    The Hyperion EPM System Installer Prerequisites shows an error on the first installer screen:
    "Hostname resolved to an IP address".
    Did anyone face this error?
    I´ve checked the help button and found following tip:
    "If you are using a hosts file to resolve your hostname, the host name resolves to the first entry in your hosts file. To prevent potential communication problems in a distributed environment, make sure that the first entry in your hosts file is the machine's fully qualified domain name so that the fully qualified name is stored in the Shared Services Registry."
    How can I resolve this issue on my virtuell mashine?
    OS:Windows Server 2003, EPM 11.1.1.1, SQL Server 2005
    thank you and regards

    We've seen this as well - and the web client is not supported in IE 9 - it's only supported in: Internet Explorer 6.0, , Internet Explorer 7.x, Internet Explorer 8.x, and Firefox 2.0.x.
    Considering that IE 9 is being pushed out as an automatically selected important update and Firefox is up to v4.x (Firefox 2.0.x is not even supported anymore), this has already caused us a huge headache.

  • Installing EM12c for Windows x86-64 fail when Plugins prerequisite check

    Hi,
    I am installing EM12c for Windows x86-64 but fail when plugins prerequisite check,
    the configplugin_prereq_check_DATE.log as below:
    2012-05-14 17:22:31,474 [main] WARN pluginca.PluginCADriver -
    2012-05-14 17:22:31,474 [main] WARN pluginca.PluginCADriver - ---------------------------------------------------------------
    2012-05-14 17:22:31,474 [main] WARN pluginca.PluginCADriver - ---Plugins On Which Action "Prereq check" Is To Be Performed---
    2012-05-14 17:22:31,474 [main] WARN pluginca.PluginCADriver - oracle.sysman.db=12.1.0.2.0
    2012-05-14 17:22:31,474 [main] WARN pluginca.PluginCADriver - oracle.sysman.xa=12.1.0.2.0
    2012-05-14 17:22:31,474 [main] WARN pluginca.PluginCADriver - oracle.sysman.emas=12.1.0.2.0
    2012-05-14 17:22:31,474 [main] WARN pluginca.PluginCADriver - oracle.sysman.mos=12.1.0.2.0
    2012-05-14 17:22:31,474 [main] WARN pluginca.PluginCADriver - ---------------------------------------------------------------
    2012-05-14 17:22:31,474 [main] WARN pluginca.PluginCADriver -
    2012-05-14 17:22:31,630 [main] WARN deploymentservice.EMPluginDeploymentUtil - No OMS name property passed. Assuming there is only one entry in emInstanceMapping.properties.
    2012-05-14 17:22:32,831 [main] WARN deploymentservice.EMPluginDeploymentUtil - No OMS name property passed. Assuming there is only one entry in emInstanceMapping.properties.
    2012-05-14 17:22:32,894 [main] WARN pluginca.PluginCABackup - No connection passed. Not storing any backup info in repo.
    2012-05-14 17:22:32,894 [main] WARN pluginca.PluginCABackup - No connection passed. Not storing any backup info in repo.
    2012-05-14 17:22:32,894 [main] WARN pluginca.PluginCABackup - No connection passed. Not storing any backup info in repo.
    2012-05-14 17:22:33,689 [main] ERROR pluginca.PluginCADriver - Error while performing Pre config module for plugin oracle.sysman.mos:12.1.0.2.0:0
    Error is: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    Aborting config for the plugin and all other dependent plugins.
    2012-05-14 17:22:33,689 [main] ERROR pluginca.PluginCADriver - ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    oracle.sysman.core.common.extensibility.pluginca.PluginCAException: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.performCustomConfig(PluginCAHelper.java:702)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.preDeployCustomConfig(PluginCAHelper.java:567)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep.preDeploy(PreConfigModuleStep.java:165)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep.run(PreConfigModuleStep.java:87)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleExecutor.run(PreConfigModuleExecutor.java:46)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.preqreqCheck(PluginCA.java:790)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.configure(PluginCA.java:326)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.initPluginCA(PluginCADriver.java:1798)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.beginConfig(PluginCADriver.java:978)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.main(PluginCADriver.java:1997)
    Caused by: oracle.sysman.emInternalSDK.core.extensibility.pluginca.PluginCustomConfigException: Patches for the following bugs need to be applied before attempting plugin deployment: [13242773]
         at oracle.sysman.config.MosPluginCustomConfig.doPreDeployConfig(MosPluginCustomConfig.java:106)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.performCustomConfig(PluginCAHelper.java:692)
         ... 9 more
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Error while performing Pre config module for plugin oracle.sysman.emas:12.1.0.2.0:20120427
    Error is: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    Aborting config for the plugin and all other dependent plugins.
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    oracle.sysman.core.common.extensibility.pluginca.PluginCAException: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.performCustomConfig(PluginCAHelper.java:702)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.preDeployCustomConfig(PluginCAHelper.java:567)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep.preDeploy(PreConfigModuleStep.java:165)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep.run(PreConfigModuleStep.java:87)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleExecutor.run(PreConfigModuleExecutor.java:46)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.preqreqCheck(PluginCA.java:790)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.configure(PluginCA.java:326)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.initPluginCA(PluginCADriver.java:1798)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.beginConfig(PluginCADriver.java:978)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.main(PluginCADriver.java:1997)
    Caused by: oracle.sysman.emInternalSDK.core.extensibility.pluginca.PluginCustomConfigException: Patches for the following bugs need to be applied before attempting plugin deployment: [13242773]
         at oracle.sysman.as.pluginpreconfig.AsPluginCustomConfig.doPreDeployConfig(AsPluginCustomConfig.java:113)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.performCustomConfig(PluginCAHelper.java:692)
         ... 9 more
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Error while performing Pre config module for plugin oracle.sysman.db:12.1.0.2.0:20120427
    Error is: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    Aborting config for the plugin and all other dependent plugins.
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    oracle.sysman.core.common.extensibility.pluginca.PluginCAException: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.performCustomConfig(PluginCAHelper.java:702)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.preDeployCustomConfig(PluginCAHelper.java:567)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep.preDeploy(PreConfigModuleStep.java:165)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep.run(PreConfigModuleStep.java:87)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleExecutor.run(PreConfigModuleExecutor.java:46)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.preqreqCheck(PluginCA.java:790)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.configure(PluginCA.java:326)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.initPluginCA(PluginCADriver.java:1798)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.beginConfig(PluginCADriver.java:978)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.main(PluginCADriver.java:1997)
    Caused by: oracle.sysman.emInternalSDK.core.extensibility.pluginca.PluginCustomConfigException: Patches for the following bugs need to be applied before attempting plugin deployment: [13242773]
         at oracle.sysman.db.patch.DbPluginCustomConfig.doPreDeployConfig(DbPluginCustomConfig.java:105)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.performCustomConfig(PluginCAHelper.java:692)
         ... 9 more
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Pre config module failed for some plugins.
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Error are:
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Error while performing Pre config module for plugin oracle.sysman.mos:12.1.0.2.0:0
    Error is: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    Aborting config for the plugin and all other dependent plugins.
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Error while performing Pre config module for plugin oracle.sysman.emas:12.1.0.2.0:20120427
    Error is: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    Aborting config for the plugin and all other dependent plugins.
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Error while performing Pre config module for plugin oracle.sysman.db:12.1.0.2.0:20120427
    Error is: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    Aborting config for the plugin and all other dependent plugins.
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Check Pre config module log for more details.
    2012-05-14 17:22:33,720 [main] ERROR pluginca.PluginCADriver - Prereq Check unsuccessful.
    2012-05-14 17:22:33,720 [main] ERROR pluginca.PluginCADriver - PREREQ_CHECK_UNSUCCESSFUL
    oracle.sysman.core.common.extensibility.pluginca.PluginCAException: PREREQ_CHECK_UNSUCCESSFUL
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.preqreqCheck(PluginCA.java:827)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.configure(PluginCA.java:326)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.initPluginCA(PluginCADriver.java:1798)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.beginConfig(PluginCADriver.java:978)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.main(PluginCADriver.java:1997)
    2012-05-14 17:22:33.720 [ PluginCAUtil - Emergency log ]
    oracle.sysman.core.common.extensibility.pluginca.PluginCAException: PREREQ_CHECK_UNSUCCESSFUL
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.preqreqCheck(PluginCA.java:827)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.configure(PluginCA.java:326)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.initPluginCA(PluginCADriver.java:1798)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.beginConfig(PluginCADriver.java:978)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.main(PluginCADriver.java:1997)
    2012-05-14 17:22:33,720 [main] DEBUG pluginca.PluginCADriver - 2012-05-14 17:22:33.720
    the configplugin_prereq_check_DATE.trc as below:
    2012-05-14 17:22:32,894 [main] INFO pluginca.PluginCADriver - =============PRE CUSTOM CONFIURATION STARTS ============
    2012-05-14 17:22:33,689 [main] ERROR pluginca.PluginCADriver - Error while performing Pre config module for plugin oracle.sysman.mos:12.1.0.2.0:0
    Error is: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    Aborting config for the plugin and all other dependent plugins.
    2012-05-14 17:22:33,689 [main] ERROR pluginca.PluginCADriver - ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    oracle.sysman.core.common.extensibility.pluginca.PluginCAException: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.performCustomConfig(PluginCAHelper.java:702)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.preDeployCustomConfig(PluginCAHelper.java:567)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep.preDeploy(PreConfigModuleStep.java:165)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep.run(PreConfigModuleStep.java:87)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleExecutor.run(PreConfigModuleExecutor.java:46)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.preqreqCheck(PluginCA.java:790)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.configure(PluginCA.java:326)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.initPluginCA(PluginCADriver.java:1798)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.beginConfig(PluginCADriver.java:978)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.main(PluginCADriver.java:1997)
    Caused by: oracle.sysman.emInternalSDK.core.extensibility.pluginca.PluginCustomConfigException: Patches for the following bugs need to be applied before attempting plugin deployment: [13242773]
         at oracle.sysman.config.MosPluginCustomConfig.doPreDeployConfig(MosPluginCustomConfig.java:106)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.performCustomConfig(PluginCAHelper.java:692)
         ... 9 more
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Error while performing Pre config module for plugin oracle.sysman.emas:12.1.0.2.0:20120427
    Error is: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    Aborting config for the plugin and all other dependent plugins.
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    oracle.sysman.core.common.extensibility.pluginca.PluginCAException: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.performCustomConfig(PluginCAHelper.java:702)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.preDeployCustomConfig(PluginCAHelper.java:567)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep.preDeploy(PreConfigModuleStep.java:165)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep.run(PreConfigModuleStep.java:87)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleExecutor.run(PreConfigModuleExecutor.java:46)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.preqreqCheck(PluginCA.java:790)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.configure(PluginCA.java:326)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.initPluginCA(PluginCADriver.java:1798)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.beginConfig(PluginCADriver.java:978)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.main(PluginCADriver.java:1997)
    Caused by: oracle.sysman.emInternalSDK.core.extensibility.pluginca.PluginCustomConfigException: Patches for the following bugs need to be applied before attempting plugin deployment: [13242773]
         at oracle.sysman.as.pluginpreconfig.AsPluginCustomConfig.doPreDeployConfig(AsPluginCustomConfig.java:113)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.performCustomConfig(PluginCAHelper.java:692)
         ... 9 more
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Error while performing Pre config module for plugin oracle.sysman.db:12.1.0.2.0:20120427
    Error is: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    Aborting config for the plugin and all other dependent plugins.
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    oracle.sysman.core.common.extensibility.pluginca.PluginCAException: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.performCustomConfig(PluginCAHelper.java:702)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.preDeployCustomConfig(PluginCAHelper.java:567)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep.preDeploy(PreConfigModuleStep.java:165)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep.run(PreConfigModuleStep.java:87)
         at oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleExecutor.run(PreConfigModuleExecutor.java:46)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.preqreqCheck(PluginCA.java:790)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.configure(PluginCA.java:326)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.initPluginCA(PluginCADriver.java:1798)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.beginConfig(PluginCADriver.java:978)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.main(PluginCADriver.java:1997)
    Caused by: oracle.sysman.emInternalSDK.core.extensibility.pluginca.PluginCustomConfigException: Patches for the following bugs need to be applied before attempting plugin deployment: [13242773]
         at oracle.sysman.db.patch.DbPluginCustomConfig.doPreDeployConfig(DbPluginCustomConfig.java:105)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCAHelper.performCustomConfig(PluginCAHelper.java:692)
         ... 9 more
    2012-05-14 17:22:33,705 [main] INFO pluginca.PluginCADriver - =============PRE CUSTOM CONFIURATION ENDS ============
    2012-05-14 17:22:33,705 [main] INFO pluginca.PluginCADriver - Back from pre custom config
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Pre config module failed for some plugins.
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Error are:
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Error while performing Pre config module for plugin oracle.sysman.mos:12.1.0.2.0:0
    Error is: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    Aborting config for the plugin and all other dependent plugins.
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Error while performing Pre config module for plugin oracle.sysman.emas:12.1.0.2.0:20120427
    Error is: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    Aborting config for the plugin and all other dependent plugins.
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Error while performing Pre config module for plugin oracle.sysman.db:12.1.0.2.0:20120427
    Error is: ERROR_IN_CUSTOM_CONFIG( Exception while performing custom config )
    Aborting config for the plugin and all other dependent plugins.
    2012-05-14 17:22:33,705 [main] ERROR pluginca.PluginCADriver - Check Pre config module log for more details.
    2012-05-14 17:22:33,720 [main] DEBUG pluginca.PluginCADriver - oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleStep - start - 2012-05-14 17:22:33.720
    2012-05-14 17:22:33,720 [main] DEBUG pluginca.PluginCADriver - oracle.sysman.core.common.extensibility.pluginca.PreConfigModuleExecutor - end - 2012-05-14 17:22:33.720
    2012-05-14 17:22:33,720 [main] ERROR pluginca.PluginCADriver - Prereq Check unsuccessful.
    2012-05-14 17:22:33,720 [main] ERROR pluginca.PluginCADriver - PREREQ_CHECK_UNSUCCESSFUL
    oracle.sysman.core.common.extensibility.pluginca.PluginCAException: PREREQ_CHECK_UNSUCCESSFUL
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.preqreqCheck(PluginCA.java:827)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCA.configure(PluginCA.java:326)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.initPluginCA(PluginCADriver.java:1798)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.beginConfig(PluginCADriver.java:978)
         at oracle.sysman.core.common.extensibility.pluginca.PluginCADriver.main(PluginCADriver.java:1997)
    2012-05-14 17:22:33,720 [main] DEBUG util.PluginCAUtil - Connection: null Step ID: -1
    2012-05-14 17:22:33,720 [main] DEBUG util.PluginCAUtil - Not updating job step
    Anyone has experience for this problems? and someone install this version success?
    I am appreciate for your help.

    Hi Colin
    Since we were debugged this issue offline and we found the root cause of the problem. I am updating this thread with more detail for the benefit of others :
    We looked in your environment and log files for more details and we found below error ( updating it so that we can know the complete picture)
    ÐÅÏ¢: Applying opatch for the oneoffs 13242773,13707704 ...
    ÐÅÏ¢: D:\oracle\oem\oms/OPatch/opatch.bat napply -silent -local -oh D:\oracle\oem\oms -phBaseFile D:\oracle\oem\oms/patch.txt
    ÐÅÏ¢: ERROR STREAM: java.lang.NoClassDefFoundError: DB
    ÐÅÏ¢: ERROR STREAM: Caused by: java.lang.ClassNotFoundException: DB
    ÐÅÏ¢: ERROR STREAM: at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    ÐÅÏ¢: ERROR STREAM: at java.security.AccessController.doPrivileged(Native Method)
    ÐÅÏ¢: ERROR STREAM: at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    ÐÅÏ¢: ERROR STREAM: at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    ÐÅÏ¢: ERROR STREAM: at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
    ÐÅÏ¢: ERROR STREAM: at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
    ÐÅÏ¢: ERROR STREAM: Could not find the main class: DB. Program will exit.
    It fails to apply the one of the patches , as Opatch get the CLASSPATH environment variable that has spaces.
    The workaround for this to unset the CLASSPATH environment variable and then begin the installation process. Its doced in the release note and install guide.

  • Prerequisite checks fails for the oracle 11g r2 in win7 Ultimate 64-bit

    Hi all, I am trying to install Oracle 11 g Release 2 in Windows 7 Ultimate 64-bit and the prerequisite checks are failed.
    The checks Physical Memory, Available Physical Memory, Swap size, Free Space: .../temp; and all the other checks also failed.
    My laptop configurations are
    Processor : Intel Core i-3 CPU
    RAM: 4GB
    O.S: Win 7 Ultimate Service Pack 1
    Do I have to Ignore the checks go head with the installation. Plz let me know.

    938825 wrote:
    Hi all, I am trying to install Oracle 11 g Release 2 in Windows 7 Ultimate 64-bit and the prerequisite checks are failed.
    The checks Physical Memory, Available Physical Memory, Swap size, Free Space: .../temp; and all the other checks also failed.
    My laptop configurations are
    Processor : Intel Core i-3 CPU
    RAM: 4GB
    O.S: Win 7 Ultimate Service Pack 1
    Do I have to Ignore the checks go head with the installation. Plz let me know.follow Installation Guide
    http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=

  • SCCM 2012 R2 Prerequisite Check

    Hello
    I'm stuck with the installation of SCCM 2012 R2. I get stuck at the Prerequisite Check with the following errors:
    1. SQL Server service running account
    2. Required SQL Server Collation
    3. SQL Server sysadmin rights
    SQL 2012 SP1 is installed on the same Windows Server 2012 R2 server that I am trying to install the SCCM 2012 R2 on. I did not use the default instance name during the SQL 2012 SP1 setup and created a name myself. I have also applied SQL Server 2012 SP1
    x64 CU9 before I proceeded with the SCCM 2012 R2 setup. I have put in credentials for a service account (Domain Admin) for the five SQL Services (SQL Server Analysis Services, SQL Server, SQL Server Reporting Services, SQL Server Agent, SQL Server Browser).
    Is it okay if I use the same service account for all 5 services? I have also turned off firewall and disabled the Windows Firewall Service. Why am I getting error number 1?.
    I chose "SQL_Latin1_General_CP1_CI_AS" as server collation during SQL 2012 SP1 setup. If I go to Microsoft SQL Server Management Studio and go to Server Properties, I can see Server Collation is "SQL_Latin1_General_CP1_CI_AS". Why am
    I getting error number 2?
    I have made the Service Account used for SQL Services, the account used to install SCCM 2012 R2 and also a local group on the same server which has the local computer account to "sysadmin" under Server Roles on Microsoft SQL Server Management Studio.
    Why am I getting error number 3?
    Can anyone help me out here please?

    Hi,
    if you setup a named instance, have to configure SQL Server to listen on an static TCP port. (instead dynamic TCP port)
    In SQL Server Configuration Manager, expand SQL Server Network Configuration, and then click Protocols for <instance_name>.
    Expand Protocols for <instance_name>, and then click TCP/IP.
    Right-click TCP/IP,
    and then click Properties
    In the IP Addresses tab, under IPAll, set TCP Port (1433).

  • Prerequisites check error for English language pack

    Hi All,
    We are installing Diagnostics Agent on Windows Server 2008 R2 Enterprise.
    While installing in prerequisites checker we are getting error about language pack.
    The error log from sapinst_dev is as follows:
    TRACE      2011-11-22 12:29:46.571
    tPRCResults.insertRow(), inserting
    We have already installed SAP Solution Manager 7.1 on that server. But now It is showing error.
    In Region And Language of OS it is showing English (United States)
    Please help us to solve this issue.
    Thanks & Regards,
    Ishan

    Hi,
    As per your question:
    message:Make sure that the English language pack is installed on your operating system so that your support requests can be handled quickly.
    I am sure your English Language Pack is already Installed in your Server,So you have to IGNORE the message and move forward
    with your Diagnostic Agent Installation.
    Thanks & Regards
    Ajitabh

Maybe you are looking for

  • Acrobat 7 Pro Windows Scanning Issues for Non-Admins

    Hello, We have several users that are having scanning issues. WE recently removed administrator rights from our end users and now for some reason Acrobat 7 Professional doesn't show any scanners in the list when they try to create a PDF from the scan

  • Vendor Invoice amount allowing any higher value

    Hi 1. While I do a vendor invoice for a PO, the document balance field (DIFFERENZ) is showing in Green light even before I input the amount in the Amount field.(WRBTR) 2. And also, if the total invoice amount is USD 1000.00, the amount field is allow

  • Notification Agent

    The notification agent is loaded in the ServerManager. The NotificationAgent status is active and the priority is set to '5'. When I am testing this agent, I do not get an e-mail from the editor of a document. What can be the problem ?

  • How to dynamically display value in column header

    Hi, I have a requirement where in the user selects a particular value from a drop down list, and the same has to be displayed in the column header. For example, there are A,B,C,D types of quantities in a drop down list. Once the user selects these va

  • Pleasant surprise with CSP UR points!

    I logged in to check out my UR points balance and noticed my earnings on next statement was MUCH higher than anticipated. Since I'm still working on my intro spend I looked to find out if I had earned some other type of bonus or something. Turns out