AIA Installation Screen shots

Hi All,
Can any one can tell what is the procedure for installaing AIA and wokring on it.
Also please guide can any where there are some samplles available to hav an walkthrough of this enitire concept.
Exepcting a reply from any body.
Regards,
Chakri

You can goto -- http://www.oracle.com/technetwork/middleware/foundation-pack/documentation/index.html#fp25
All the versions of AIA are available here.

Similar Messages

Sap installation screen shots on UNIX platform

hi friends,
can any one send or guide me in getting me the SAP INSTALLATION screen shots on UNIX platform..
pls mail to [email protected]
regards,
satish.

"Unix" is a generic term for operating systems based on the initial AT & T operating system. There are many flavors of it - on some of them you can install a SAP system, on others not.
There is (for SAP)
AIX
HP-UX (on PA-RISC and IA64)
Solaris (on SPARC and x86_64)
Linux (on x86, x86_64, IA64, Power)
Each one of those has its specialties and special configuration. So without knowing to what "Unix" you are referring, your question can't be answered that easily.
On top of that, using screenshots to install software is a pretty bad idea. I may work for the one who did those but it may not for you if you have a different hardware configuration, more or less memory, different filesystem layout etc. In that case, you will cry for help the first time you see an error message - and since you don't know what the system was trying to do, you can't find a solution for it.
Therefore it's MUCH better to use the (very good) installation guides, they will tell you what you need to do, they will explain everything much more in detail than a "screenshot document" could tell you.
Use the given link to get your guide and try - and if you have problems, ask your questions in the appropriate forum - I'm sure there are people willing to help (including me).
Markus

SAP INSTALLATION SCREEN SHOTS

hi,
can i get the screen shots and software requirements for SAP ECC6.0 Installation.

Hi Nandini,
you do not find screen shots for installation.The required software you can get from sap or you can download the same from servise marketplace.
https://websmp203.sap-ag.de/swdc
Downloads -> SAP Installations & Upgrades->My Company's Application Components->SAP ERP->SAP ERP 6.0->Installation and Upgrade
download below components
Installation master for your 0/s and db
Installation exports
Kernel (unicode or non-unicode)
Regards
Ashok

Screen shots

Hi ,
We are trying to implement EP 7.0 based on NW 2004 s . Does anybody have a document with some screen shots ( step by step ) out their own experience .
I really appreciate this help
Thanks
J

Hi ,
Thanks for your reply . We are planning to install EP 7.0 on WAS 6.0 for NW04s SR1( this is basically for ESS 1.0 , MSS 1.0 , BP for learning solution 1.0 based on mySAPERP 2005 ( ECC 6.0 ) backend . We also wanted to have some BI java capabilities .Since the NW04s os based on Usage types , I am confused to go with what kind of usage types we wanted ( Because I saw one SDN thread saying that they have end up in installing two portals - one for the BI and another one for eg :the scenario ' Running an Enterprise Portal '.
We are planning for both central instance + Dialog instance . So any installation screen shots for installing the central instance and dialog instance will help .
You can also send it to <b>[email protected]</b>
Thanks
J

Installation guide with screen shots for OAS Installation

Hi,
I want to know if there is an Oracle Application Server Installation Guide 10g Release 2 (10.1.2) for Solaris Operating System (SPARC) that contains the screen shots of the installation procedure.
Thanks in advance.
Regards,
Sindhiya V.

Hi,
You can download this document from oracle web site. They have linux installation guide as well as windows guide. That will be enough for you to undarstand the installation steps.
Alex

I uninstalled and reinstalled but at the end of installation there were erros. See attached screen shot. I now cannot open the application. error code 10810 comes up when I try to open.

I could not update photoshop CS6 and Jeff from forum advised unistalling and reinstalling (Tk93580659). Mac OSX. In real trouble, as suggested I uninstalled and reinstalled but at the end of installation there were errors. See attached screen shot. Now I cannot open the application. Error code 10810 comes up when I try to open (see 2nd screenshot). Please help. I have now lost photoshop altogether whereas previous at least I still could use it but could not update. Thank you for any help to instal successfully. Dr Koh

Still looking for a solution to specific installation errors (see screeshot) referring to "Language Pack installation failure":
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS6 International English Language Pack_AdobePhotoshop13-en_GB: Install failed
Unfortunately previous advice of using CCS cleaner tool, and suggestions from links for 1) "exit code 6 and 7" and 2) "Troubleshoot instal logs" did not work at all. So I am desparate to fix this because I have spent a lot of money purchasing Photoshop CS6 but have no functioning program. Surely Adobe can help solve this problem with installing, or else it means a lot of money spent on Photoshop CS6 for nothing. I am appealing directly to Adobe to help because I have come to the end of my options. I thank the forum for their suggestions but so far the solution for this specific "Language Pack installation failure" problem is missing. Thank you.
Dr Koh

After installing Flash Player on a Mac with Mavericks, I get a long text error message about "Installation error". Can send screen shot if helpful.

Error message titled "Internal Server Error". Unable to download screen shot, which is a small file, but .tiff.
Any recommendations on the basis of this very minimal info?
RPB

Hello,
Yes a screenshot will be helpful. The format needs to be either JPG or PNG to upload to the forums. You can use the Preview app (How to post a screenshot in the forum) to take the screenshot and save it in JPG or PNG.
Maria

Hi friends SAP R/3 4.7 EE(ABAP) INSTALLLATION SCREEN SHOTS

can you send sap r/3 4.7 (ABAP) installation step by step screen shots
this is my mail id [email protected]
Advance thanks.....
Thanks & Regards,
Vijay.D

hi Ahamad,
thanks for ur reply..
if u dont mind can u upload save file or put file website ...give that url i can download material...
Thanks & Regards,
Vijay.D

Screen shots of sap pm

some one said there are many screen shots of sap pm and end user manual screen shots on net and SDN
if it is true, and any one know any link then help me also.

Hi,
Please follow below link. This may help you.
SAP Installation Screenshots
Thanks,
Priyanka

Snowleopard Screen Shot - permission to save denied

I have encountered a bug in Snowleopard on two machines that give the error message: 'You don't have permission to save files in the location where screen shots are stored.' when I try to make a screen shot.
It turns out that the user/library/preferences fold does not have the apple.com.screenshot.plist file. There are two new installations of the OS by the way, so at least two copies of the OS installer are not creating this file.
Can anyone post the necessary contents of this file so people who are in my position (quite a few I would imagine) can manually create the necessary file?

Kappy wrote:
DU does not repair any permissions in the Home folder.
Good point Kappy makes above.
However if you just upgraded to SL from 10.4.11 as your info shows, always good to repair permission after any upgrade.
If neccesarry maybe easiest to use Apple's *"Reset Home Folder Permissions"* routine that is available on the OS X installation DVD.
Boot to the DVD and select your language, and then choose "Reset Password" from the "Utilities" menu.
In this utility, you can *reset the permissions on your home directory* to be as they are on a default OS X installation.

Lean ware house management screen shots

Hi sd gurus,
now my client is having requirement of lean ware house mgmt ,can any one send me screen shots for configuration process
to my mail id [email protected]

Hi Srini,
Please find the complete notes on Lean Ware House Management System below:
A09 Lean Warehouse Management: Configuration Guide
Purpose
The purpose of this document is to describe the general configuration steps required to manually set up the configuration within the system landscape that has already been installed using the corresponding installation or configuration guides for installation.
The Configuration Guide describes how to set up the configuration of a Building Block manually, without the support of automated configuration tools.
Preparation
1.1     Prerequisites
The following building blocks form the basis for all mySAP All-in-One Automotive, High Tech and Industrial Machinery and Components solutions. You only have to install these building blocks once.
Building Blocks     Comment
Baseline Building Blocks (Layer 0)
J00 - Essential Information
J02 - Organizational Structure
J03 - Financial Accounting
J08 - Controlling
J05 - Materials Management
J04 - Sales and Distribution
Baseline Building Blocks (Layer 1)
J06 - Production Planning and Controlling
J07 Quality Management
J18 - Product Cost Controlling
J19 Batch Management
J20 - Cost Object Controlling Make-to-Order
J21 - Cost Object Controlling Make-to-Stock
J17 - Profitability Analysis
J14 - Human Capital Management
J09 - Travel Management
Industry generic Building Blocks
E04 - Supplement Settings
E05 - Master Data HT / IM&C
Configuration
1.2     Lean WM Basic Settings
1.2.1     Defining Control Parameters and Number Ranges for the Warehouse Number Defining Control Parameters for the Warehouse Number
Use
A warehouse number is an organizational unit in Logistics, which organizes the company from the perspective of Warehouse Management.
In the Warehouse Management System, you can define a variety of control parameters at warehouse number level.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define control parameters and number ranges for the warehouse number Define control parameters and number ranges for warehouse no.(double click)
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field.
Table V_T3002
Field name     Value     R/O/C     Description
Whse number     L01     R
Warehouse no. description     Lean WM BP01     R
Weight unit     KG     R
Volume unit
Default UoM     K     R
Time unit/performance data
Lean WM active     X     R
Link to subsystem active
Performance data
Transfer order     01     R
Group number     01     R
1.2.2     Defining Storage Type
Use
A warehouse number is subdivided into a variety of storage types. A storage type is defined by its physical or organizational features (for example, high rack storage area, bulk storage, and goods receipt areas).
A storage type has a short description rather than an address.
Before you can implement Lean WM, you must configure the following settings:
1.     Assign a (newly defined) storage location to a warehouse number.(This step is defined by step 3.12 Control Plant / Storage Location / Warehouse Number Assignment
2.     You should set up at least three storage types:
     a storage type (that will be used as a source storage type) with one or several fixed storage bins
     a goods issue area (as destination storage type) for deliveries
     an interim storage area for differences
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Storage type
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T3012
Data record 1:
Field name     Value     Sub-screen
Whse number     L01
Warehouse no. description     Lean WM BP01
Storage type     001
Storage type name     Fixed bin storage
Stock plcmt requires confirmation          for putaway control
Unit of measure type srch
Stock rmvl requires confirmation          for picking control
Unit of measure type srch
Data record 2:
Field name     Value     Sub-screen
Whse number     L01
Warehouse no. description     Lean WM BP01
Storage type     916
Storage type name     Shipping area deliveries
Stock plcmt requires confirmation          for putaway control
Unit of measure type srch
Stock rmvl requires confirmation          for picking control
Unit of measure type srch
Data record 3:
Field name     Value     Sub-screen
Whse number     L01
Warehouse no. description     Lean WM BP01
Storage type     999
Storage type name     Differences
Stock plcmt requires confirmation          for putaway control
Unit of measure type srch
Stock rmvl requires confirmation          for picking control
Unit of measure type srch
Data record 4:
Field name     Value     Sub-screen
Whse number     L01
Warehouse no. description     Lean WM BP01
Storage type     902
Storage type name     IN-ZONE
Stock plcmt requires confirmation          for putaway control
Unit of measure type srch
Stock rmvl requires confirmation          for picking control
Unit of measure type srch
1.2.3     Defining Doors
Use
In a WM-managed warehouse, you can define dock doors (also known as doors or gates). A door is a location where the goods either arrive in the warehouse or leave it.
You can assign different functions to a dock door, for example:
Goods receipt
Goods issue
Other transactions such as cross-docking and flow-through
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM Define Doors
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T30B
Field name     Value     R/O/C     Description
Whse no.     L01     R     Warehouse number
Door     A01     R     Door for warehouse number
Text for door     Door A01     R     Text for door
Staging area
Matl stag. area txt
GI indic.     X     R     Goods issue indicator
GR ind     X     R     Goods receipt indicator
CD ind               Cross-docking indicator
FT ind               Flow-through indicator
1.2.4     Defining Material Staging Areas
Use
A staging area is an interim storage area for goods that have been received from goods receipt and afterwards need to be transferred into the warehouse.
It is also an interim storage area for goods that were picked in a warehouse and are to be loaded for goods issue through loading ramps or doors.
You can assign different functions to a staging area:
     Goods issue
     Goods receipt
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Material Staging Area
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T30C
Field name     Value     R/O/C     Description
Whse no.     L01     R
Staging area     A01-01     R
Matl stag. area txt     Zone 1     R
Door     A01     R     Door for warehouse number
Text for door     Door A01     R
GI ind     X     R     Goods issue indicator
GR ind     X     R     Goods receipt indicator
CD ind               Cross-docking indicator
FT ind               Flow-through indicator
HU ind               Handling unit indicator
1.2.5     Defining Picking Area
Use
A picking area is an object within a storage type that groups together storage bins for purposes of stock removal.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM Define Picking Area
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T30A2
Data record 1:
Field name     Value     R/O/C     Description
WhN     L01     R     Warehouse number
STy (storage type)      001     R
PAr (Picking area)     001     R
Picking area name     Picking area 1     R
Data record 2:
Field name     Value     R/O/C     Description
WhN     L01     R     Warehouse number
STy (storage type)      001     R
PAr (Picking area)     002     R
Picking area name     Picking area 2     R
1.2.6     Defining Transfer Type
Use
In Lean WM, the transfer type "A" (stock removal) is required for movement type control.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Transfer Type
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T333A2
Field name     Value     R/O/C     Description
WhN     L01     R     Warehouse number
Transfer type     A     R
Text f. shipment type     Pick     R
1.2.7     Defining Movement Types
Use
The SAP R/3 System uses movement type to process movements in Inventory Management (for example, goods receipt for a purchase order or goods issue to a cost center). When the system recognizes a movement as being relevant for Warehouse Management, it assigns this movement to a WM movement type by means of a table.
The movement type for the Warehouse Management System provides the information required for stock removals or picking:
     Interim storage bin
     Fixed bin coordinate
     Control indicator for processing, confirming, and printing transfer orders
     Confirmation info
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Movement Type
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T3332
Data record 1:
Field name     Value     R/O/C     Description
Warehouse number     L01     R
Warehouse no. description     Lean WM     R
Movement type     255     R
Movement type description     Goods Issue general     R
Src     001     R
Src Stor. Bin
Dest     916     R
Dest Stor. Bin
Transfer type     A     R
Text for transfer type TRATX     Pick     R
TO creation screen     2     R
Scr. TO confirmation     2     R
Manual TO creation not allowed
Transfer priority
Print code
TO item can be confirmed immed.
Propose confirmation
Data record 2:
Field name     Value     R/O/C     Description
Warehouse number     L01     R
Warehouse no. description     Lean WM     R
Movement type     601     R
Movement type description     Picking by delivery note     R
Src     001     R
Src Stor. bin
Dest     916     R
Dest Stor. bin
Transfer type     A     R
Text for transfer type TRATX     Pick     R
TO creation screen     2     R
Scr. TO confirmation     2     R
Manual TO creation not allowed     X     R
Transfer priority
Print code     02     R
TO item can be confirmed immed.     X     R
Propose confirmation
1.2.8     Defining Difference Indicator
Use
Using the difference indicator, you can classify your differences. This indicator is used in Lean WM for evaluation purposes only.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Difference Indicator
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T3362
Field name     Value     R/O/C     Description
WhN     L01     R     Warehouse number
DiffInd (difference indicator)     X     R
Description of difference indicator     Stock difference     R
Stor.ty.differences     999     R
Diff.bin
TO     X     R
Source bin
1.2.9     Control Plant / Storage Location / Warehouse Number Assignment
1.2.9.1     Assigning Warehouse No. to Plant-Storage Locations
Use
By doing so, system can recognize which storage locations in Materials Management are controlled by the Warehouse Management system (LE-WM); you must assign the plants and the storage location to the warehouse number.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMGEnterprise Structure Assignment  Logistic Execution  Assign warehouse No. To plant/storage Location
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T320
Field name     Value     R/O/C     Description
Plant     BP01     R
SLoc     0005     R
WhN     L01     R
1.2.9.2     Control Plant / Storage Location / Warehouse Number Assignment
Use
You can control for each combination of plant, storage location, and warehouse number whether Lean WM or standard management of bin inventory is to be selected.
If you are using Lean WM, you can also specify a picking storage type that is used for creating transfer orders.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Control Plant / Storage Location / Warehouse Number Assignment
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T3202
Field name     Value     R/O/C     Description
Plnt     BP01     R
Stor. loc.     0005     R
WhNo (Whse number)     L01     R
Degree of activation Warehouse Mgmt     1     R
Stor.type for picking in Lean WM     001     R
1.2.10
1.2.11     Assigning Picking Location
Use
Assign the picking locations to the combinations of shipping point and storage condition for every plant.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Determine Picking Location  Assign Picking Location
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_TVKOL
Field name     Value     Description
ShPt     BP01     Plant
Plnt     BP01     Shipping point/receiving pt
SC     K1     Storage conditions
SLoc     0005     Storage location
1.3     Print Control for Warehouse
Use
Print control defines the following:
     Which slips are to be printed for the movements (that is, for the transfer orders) within the Warehouse Management System
     How these slips are to be printed (that is, which forms are to be used, how many copies are to be printed)
     On which printer a slip is to be printed automatically
And print control manages the print operations of the warehouse. This flexibility involves a certain degree of complexity with regard to the parameterization.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Print control
Transaction Code     OMLV
2.     Choose the following button and check the contents
(Here only the contents of the warehouse no. L01 are listed):
2.1     Spool code
Data Record 1
Field name     Value     R/O/C     Description
WhN     L01          R     Warehouse number
Spool     01     R     Spool request name
Copies     1          R     Number of copies
Title     LVS1     R     Spool control data
Print_immed.     X     R     Print immediately
Delete_after_print     X     R     Release after output
NewSplReq__               New spool request
Data Record 2
Field name     Value     R/O/C     Description
WhN     L01          R     Warehouse number
Spool     02     R     Spool request name
Copies     1          R     Number of copies
Title     LVS2     R     Spool control data
Print_immed.               Print immediately
Delete_after_print     X     R     Release after output
NewSplReq__               New spool request
2.2 sort profile/collective process
Field name     Rec1     Rec2     Rec3     Rec4     Rec5     Rec6     Rec7     Rec8     Rec9
WhNo_(Whse_number)     L01     L01     L01     L01     L01     L01     L01     L01     L01
Sort_profile     1     2     3     4     5     6     7     8     9
1st_sort_criterion     SPOOI     SPOOI     SPOOI     SPOOI     SPOOI     SPOOI     SPOOI     SPOOI     SPOOI
Sort_descending_order (1st_sort_criter.)
Control_break_1st_sort_criterion
2nd_sort_criterion     LDESI     LDESI     LDESI     LDESI     LDESI     LDESI     LDESI     LDESI     LDESI
Sortdescending_order (2nd_sort_crit.)
Control_break_2nd_sort_criterion                                             X
3rd_sort_criterion     REFNR     REFNR     REFNR     REFNR     FORMI     FORMI     FORMI     FORMI     REFNR
Sortdescending_order (3rd_sort_crit.)
Control_break_3rd_sort_criterion     X     X     X     X
4th_sort_criterion     FORMI     FORMI     FORMI     FORMI     LGNUM     LGNUM     LGNUM     LGNUM     FORMI
Sortdescending_order (4th_sort_crit.)
Control_break_4th_sort_criterion                         X     X     X     X
5th_sort_criterion     LGNUM     LGNUM     LGNUM     LGNUM     VLTYP     VLTYP     VLTYP     VLTYP     LGNUM
Sortdescending_order (5th_sort_crit.)
Control_break_5th_sort_criterion
6th_sort_criterion     VLTYP     NLTYP     VLTYP     TANUM     VLPLA     NLPLA     WERKS     TAPOS     NLTYP
Sortdescending_order (6th_sort_crit.)
Control_break_6th_sort_criterion          X     X     X                         X
7th_sort_criterion     VLPLA     NLPLA     WERKS     TAPOS
     TANUM     TANUM     LGORT          KOBER
Sortdescending_order_ (7th_sort_crit.)
Control_break_7th_sort_criterion                         X
8th_sort_criterion     TANUM     TANUM     LGORT          TAPOS     TAPOS     MATNR          VLPLA
Sortdescending_order (8th_sort_crit.)
Control_break_8th_sort_criterion
9th_sort_criterion     TAPOS     TAPOS     MATNR                    CHARG          TANUM
Sortdescending_order (9th_sort_crit.)
Control_break_9th_sort_criterion
10th_sort_criterion               CHARG                    BESTQ
          TAPOS
Sortdescending_order_ (10th_sort_crit.)
Control_break_10th_sort_criterion
11th_sort_criterion               BESTQ                    SOBKZ
Sortdescending_order_ (11th_sort_crit.)
Control_break_11th_sort_criterion
12th_sort_criterion               SOBKZ                    LSONR
Sortdescending_order_ (12th_sort_crit.)
Control_break_12th_sort_criterion
13th_sort_criterion               LSONR                    VLTYP
Sortdescending_order_ (13th_sort_crit.)
Control_break_13th_sort_criterion
14th_sort_criterion               VLTYP
Sortdescending_order_ (14th_sort_crit.)
Control_break_14th_sort_criterion
15th_sort_criterion
Sortdescending_order_ (15th_sort_crit.)
Control_break_15th_sort_criterion
2.3 print code
Field name     Rec1     Rec2     Rec3     Rec4     Rec5     Rec6     Rec7
WNo___(Warehouse_number)     L01     L01     L01     L01     L01     L01     L01
PrCd__(Print_code)     01     02     03     11     12     21     22
Print_code_description
Find_shipping_data____
Determine_production_data_
Form_     LVSTAEINZEL     LVSTALISTE     LVSTOSOLO     LVSTAEINZEL     LVSTALISTE     LVSKOMMIL1
     LVSKOMMIL2
PTm_(Time_of_printing)________
Sort_profile     1     1          1     4     1     1
Combined_print          x               x     x     x
Spool_data     02     02     01     02     02     02     02
Label_form               LVSLABELS
Label_spool_code               01
Quantity_of_labels_(Indicator)               2
2.4 assign printer to storage type (LP01 to 001 only)
Field name     Rec1     Rec2     Rec3
WhNo_(Whse_number)     L01     L01     L01
STy__(storage_type)     001     916     999
Storage_type_description     Fixed bin storage     Shipping area deliveries     Differences
Printer
2.5 assign print code to movement type
Field name     Rec1     Rec2     Rec3
WhNo_(Whse_number)     L01     L01     L01
MvT__(WM_movement_type)     101     255     601
Movement_type_description     Goods receipt for pur.or.
          Picking by delivery note
PrCd__(Print_code)     01          02
2.6 assign print report to warehouse No.
Field name     Rec1
WhNo_(Whse_number)     L01
Warehouse_number_descrip.     Lean WM Plant BP01
Print_report     RLVSDR40
2.7 print control multi-processing
Field name     Rec1
WhN     L01
Ref.ty.     L
Status     2
Print_prog.     RLKOMM40
PrCd     21
Printer     LP01
1.4     Manual Activity
1.4.1     Maintaining Number Range Intervals for Transfer Order
Use
Maintain number range intervals for transfer order
Procedure
In this step, you define that, the Number range for Transfer order as 01 and Group number as 01, now you should tell the system how the number range would like for 01 as transfer order and 01 for the group number, for both number range, you may define you own number range, the following information just for reference:
Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define control parameters and number ranges for the warehouse number  Maintain number range intervals for transfer orders (double click)
Transaction Code     LN02
Check if the internal number range 01 (0000000001-1000000000) has been defined
Once you have defined your number ranges, it is extremely difficult to change them afterwards when the objects concerned are filled with data.
Bear in mind that you will be entering data on a long-term basis. Create your number range intervals accordingly.
1.4.2     Maintaining Number Range Intervals for Reference Numbers
Use
Reference number range has the following meanings:
This number identifies a number range to be used for the assignment of sequential numbers for WM reference numbers. Reference numbers are used to create or print a group of transfer orders at one time.
A sequential number generated by the system for the purpose of multiple processing of transfer requirements and delivery notes.
The reference number can also be used to print the resulting transfer orders at a later time.
Procedure
In this step, you define that, the Number range for Transfer order as 01 and Group number as 01, now you should tell the system how the number range would like for 01 as transfer order and 01 for the group number, for both number range, you may define you own number range, the following information just for reference:
Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM Define control parameters and number ranges for the warehouse number  Maintain number range intervals for Reference Numbers( double click)
Transaction Code     LN06
Check if the internal number range 01 (5000000000 - 5999999999) has been defined
Once you have defined your number ranges, it is extremely difficult to change them afterwards when the objects concerned are filled with data.
Bear in mind that you will be entering data on a long-term basis. Create your number range intervals accordingly.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

After downloading an app, how to get back to last screen shot of app store...

Hi,
After selecting to install an ap, after lot of scanning of pages, the ap download screen is displayed. After the installation, when I select to go back to the categories option , it goes back to the first page of categories... After which I have to painfully go thru all the pages I have already seen.. Any way I can go to the last screen shot of categories instead?
Please advice.

Unfortunately that is the way that it currently 'works' - you could try leaving feedback (you won't be the first to do so for this) : http://www.apple.com/feedback/ipad.html

I have Adobe X1 ver 11.0.7 installed on my iMac, when I download a .pdf and try to print it the printer preview is blank, only way is to take screen shots, is this me or an Adobe issue?

On my iMac OS-X 10.9.3 I am able to view a downloaded .pdf in my browser , if however I want to print out the .pdf via the File tab and Print in Safari, the message comes up that Adobe either does not support this format, or it s corrupted as an attachment to an email. I have tried saving it to my desktop by exporting it as a .pdf, or saving it to the desktop. In both cases when I try to open it, I get the same message.
Found that the only way I can save the data is to take a screen shot to my desktop and then I can print it out, but cripes what a pain!
Any suggestions would be welcome, is this me or an Adobe issue?

If you are printing to physical printer from Safari : Use Reader print button from Reader toolbar
If you want to save a PDF from Safari to your local : Use Reader Save button from the Reader toolbar.
PS: if you have PDF in read mode the hover the mouse at the bottom of the page and the floating Reader toolbar will appear.
Please let me know if this solves your issue.

Screen shots are not getting saved in the desktop

Hi,
Unable to capture some screen shots. I am getting the sound of camera-clicks, but not finding them in the desktop. Searched in the finder to locate, whether these are gettiing saved in any other locations, but didn't find. Followed some of the instructions in discussion forum, unsuccessfully.
Kindly help.

Hi..
Try this thread > https://discussions.apple.com/thread/1755293?tstart=0

How to take a screen shot automatically and from a remote location

Hi,
I have a Desktop, a Video Analyzer with Windows XP, and a Laptop, also running Windows XP. What I would like to do is take a screen shot from the Video Analyzer while running the LabVIEW VI from my laptop.
I have found this, which gives me insight into the complexity of a print screen call, but this is really only if LabVIEW were running on the system from which my screen shot is desired. For this post, that is not the case.
If you have a solution or even just a vague idea or comment, please do not hesitate to post. I appreciate any and all feedback on this topic.
Thank you for your time.
Jake Brinkmann
Electrical Engineering Intern

Thank you for your response. I would like to aviod using outside software in this. I'm sure that TightVNC is great, and it would probably work. I would, however, just like to do this using labview and labview only. Maybe it isn't possible but I really would like to do it entirely in labview. If anyone has any suggestions, I would love to hear them even if they, too, have outside software involved.
Thanks again Joseph

AIA Installation Screen shots

Similar Messages

Maybe you are looking for