AIR 1.1 vs AIR 1.5 problem with z

Hi,
This is my problem, I am developing a software with AIR, until now I was publishing it with AIR 1.1 and since I upgraded Flash CS4 to version 10.0.2 I can only publish with 1.5 and here is where my problems started.
I have a class that inherits from MovieClip where I had created a z property (with its function get and function set), apparently now this property is used by MovieClip and it is in conflict with my code.
I tried using override but it says that it is illigal. so I changed the name of the functions to depth but when I run the program it still says that my class is illegaly overriding the function when there is no more metion to z anymore.
Does anybody know why this is?
Is there any solution?
If not how can I publish with AIR 1.1?
Thanks

In the project I had various components that used the same library of classes and even though I had erased all the references to z some of the components that I used in the main project had been compiled before doing the changes so in their compiled versions there were still references to z. After recompiling all the components again the problem disappeared.

Similar Messages

TRYING TO SET UP I PAD TO HP AIR PRINTER HAD PROBLEMS WITH ,TALKTALK ROUTER, ASKED AT PC WORLD ADVISED TO BY AIRPORT EXPRESS BUT STILL NO LUCK WILL NOT COMPLETE SET UP. THOUGHT THIS WOULD REPLACE THE ROUTER, I THINK I MAY HAVE BEEN WRONGLY ADVISED

Having problems with air printer to i pad, problem seems to lie with talktalk router, hp solutions managed to get i mac to air printer working but not i pad, adivsed to buy another router as talktalk is not compatiable with bonjour. Went to PC world apple department advised to by airport express. tried setting it up using but will not finalise. i was led to believe this would replace the talktalk router? i feel i have been sold the wrong thing. Any suggestions

This happened to me when I was setting up the wireless router for a friend. The issue is with the Westall modem. You need to go in and setup the "bridge" option on the westell modem. The link below gives directions or you can call bellsouth dsl support (this is how I learned about it).
http://help.bellsouth.net/bellsouth/asp/contentview.asp?isbrowse=true&sprt_cid=3f993409%2Ddff7%2D422...
Good luck
Solution:
Method 1 - Hard Reset
Restore the modem to default settings by pressing the Reset button on the back of the modem and holding it for 3 seconds. (Bridged mode is the default setting for the Westell).
After the modem regains sync, it is in Bridged mode. Do not attempt to surf into the modem as surfing into the modem will enable the Easy Login page and convert the modem from bridged mode to a PPP mode.
Method 2 – Bridged Mode
Access the Westell interface using http://192.168.1.254 or http://launchmodem.
Click on the Broadband DSL Line button.
Click on the Protocols button
Select the radio button to the left of Option 2 (Bridge)
Click the save button. Once the modem has restarted it is in bridge mode.
ALL STEPS COMPLETE

Air + Ipad + RemoteObject problem with session cookies

I am making Air version for IPad of a Flex application.
My flex application needs session from an secured enterprise proxy, without that session none remoteObject requests can pass the proxy and reach blazeDS.
My solution for flex works fine: calling an enterprise servlet at application´s startup to obtain a cookie session. I use a POST call to the servlet using URLRequest (sending the user and password parameters), the servlet responds with a message with a session cookie, and from that point, without me having to code anything more, my flex application get that cookie with the session that automatically is loaded in my browser cookie stack, and that transparently is used from all my subsequents remoteObjects calls in the flex application.
In my Adobe Air Ipad version, this just does not work, the session or is not storaged or is not attached with subsequent remoteObjects requests.
- I´m forcing request.manageCookies = true
- I´m working with the IOS simulator (Is there any difference for cookies with a real Ipad device?)
- I´m using Flex 4.6.0, Air 3.5, IOS 6, Ipad 3, BlazeDS 4.0, Java 6 BackEnd.
.. What´s the problem/difference with Air+Ipad from the flex version?

Hi BalusC ,
Thanks for your detailed response. I have a question about this comment you noted..
"Terrible. Just keep the bean request scoped. "
I changed the bean to request and now have this issue.
            <rich:dataGrid id="membersInZipcode" value="#{membersInZipcode.arrayListOfSearch4Member}"
                        var="membersInZipcode" columns="5" elements="20">
            <f:facet name="footer">
                <rich:datascroller></rich:datascroller>
            </f:facet>
        </rich:dataGrid>
        </h:form> I am using a request bean to hold the search parms that loads the bean. This works great.
The problem is when I use the rich:datascroller for the next page.
It goes back to the bean and the request scope bean is empty. This holds the search values.
How do I put this back into the request after each process??
Question 2..
"Those settings only applies on the current request, i.e. the JSP file itself. Images are obtained by separate and independent requests. You need to set the headers on those requests as well. You can use a filter for this."
I have never set a filter ...how do I do it? Do you have a link for an example of this filter setup?
Thanks Again
Phil

Air Sharing app problems with updating

There appears to be an unresolved problem in updating the Air Sharing app.:
http://www.avatron.com/support/read.php?12,2886
Avatron says this is an iPhone software issue:
"I'm afraid sometimes the only way to get around these update lock-ups is to completely restore your phone as a New Phone. You can sync to get your apps back, and if you use MobileMe (.Mac) to sync your contacts, calendar, etc., you'll get that all back too. But there's just something pretty badly broken in the App Store updater. We're all hoping Apple will fix it in the next version of iPhone OS.
Dave Howell
Avatron Software, Inc. "
This company had a problem in the past with updating its software, is this an iPhone issue or is it an Avatron issue? It seems odd that if Apple vets these applications and updates, this issue should have been identified and corrected. Now, I have paid for an application I cannot use (either the old version or the updated one).

I had no problem updating. I see others were able to move all their files off the iPhone (in Air Sharing) and then do the update. Others had to take the added step of deleting the application and then re-install.
I would not say this is an Air Sharing only issue. The idea of having to restore a phone to new to get some pesky installs or apps to work has been talked about many times. I have never had to go that route, but many people had to as a last resort.
It could be an Avatron issue, but historically, their app is not the only one that has required such extreme measures. Update 2.1 fixed most app store issues, but some people still report them.

Windows Vista and WiFi networking problem with MackBook Air

Hi, everyone!
Thanks in advance for the following help.
For some specific programms I need Windows Vista to be set up on my MacBook Air.
The problem with Broadcom WiFi adapter.
While moving large files over home network it hangs and looses the wifi network. It works OK while surfing the internet or doing other low traffic job. But when it comes to 2 MB/sec transfer it doesn't work. I tried two different routers, no positive result. PC works propely on any file sizes. After booting the Leopard the problem goes away. So it is onle Windows Vista problem.
May be drivers? I tried 4.170.25.19 Windows Vista drivers from Broadcom - it didn't help. But I am not goog in driver settings in Control Panel, so may be the solution is there.
Any ideas how to solve it?
Thanks for help in advance.
Andrey.

Hello Nescom. Welcome to the Apple Discussions!
I'm afraid I really don't have an answer for you but I can offer my experiences with large files transfer with Vista. My current home network is a combination of Windows PC, Windows Servers, and Macs. Large file transfers between most of them have relatively the same performance, except when transferring large files from the Vista PC to any other OS. It is demonstrably slower. Interestingly, transfers between Vista machines does not appear to be a problem. I understand that this is a known problem by Microsoft and was supposed to be fixed with Vista SP1.
So the problem might not be your network, but Vista itself. I'm curious if you have this problem when transferring large files to another Vista device?

New Mid 2013 Macbook Air has Battery Problems

I'm having problems with my new Mid 2013 Macbook Air. I read it's to do with the i7 processor or using Chrome. Below are the details from etresoft scan. Any help on how to find and shut down unecessary items/processes much appreciated?
Hardware Information:
          MacBook Air (13-inch, Mid 2013)
          MacBook Air - model: MacBookAir6,2
          1 1.7 GHz Intel Core i7 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 5000 - VRAM: 1024 MB
Startup Items:
          HP USB EWS Gateway - Path: /Library/StartupItems/HP USB EWS Gateway
          HWNetMgr - Path: /Library/StartupItems/HWNetMgr
          HWPortDetect - Path: /Library/StartupItems/HWPortDetect
System Software:
          OS X 10.8.4 (12E3200) - Uptime: 0 days 1:45:46
Disk Information:
          APPLE SSD SD0256F disk0 : (251 GB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 250.14 GB (95.74 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Internal Memory Card Reader
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
          [loaded] com.paragon.NTFS.trial.plist
          [loaded] com.paragon.NTFS.upd.plist
Launch Daemons:
          [loaded] cn.com.zte.PPPMonitor.plist
          [loaded] com.adobe.fpsaud.plist
          [not loaded] com.adobe.SwitchBoard.plist
          [loaded] com.google.keystone.daemon.plist
          [loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.CS5ServiceManager.plist
          [loaded] com.google.keystone.agent.plist
User Launch Agents:
          [loaded] com.divx.agent.postinstall.plist
          [failed] com.facebook.videochat.plist
          [loaded] com.spotify.webhelper.plist
          [not loaded] Internet Everywhere
User Login Items:
          Google Chrome
          VMCStatusMenu
3rd Party Preference Panes:
          DivX
          Flash Player
          Paragon NTFS for Mac ® OS X
          Perian
Internet Plug-ins:
          DivXBrowserPlugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          googletalkbrowserplugin.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          o1dbrowserplugin.plugin
          OVSHelper.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          Dashlane.plugin
          Picasa.plugin
Bad Fonts:
          None
Top Processes by CPU:
               2%          EtreCheck
               2%          WindowServer
               1%          Google Chrome
               0%          pbs
               0%          Microsoft Word
               0%          fontd
               0%          quicklookd
               0%          Microsoft Excel
               0%          Finder
               0%          coreservicesd
Top Processes by Memory:
          328 MB             mds
          262 MB             Google Chrome
          164 MB             Finder
          131 MB             Microsoft Word
          106 MB             WindowServer
          98 MB              Microsoft Excel
          90 MB              Dashlane
          66 MB              Calendar
          66 MB              Google Chrome Helper
          66 MB              DashlaneAgent
Virtual Memory Statistics
          2.69 GB            Free RAM
          3.45 GB            Active RAM
          1.01 GB            Inactive RAM
          858 MB             Wired RAM
          2.38 GB            Page-ins
          0 B                Page-outs

I did need to install the software so thanks for that but the battery life is still reporting only about 6 hours for a brand new mid 2013 macbook air 13 inch.

Problem with MacMail on MacBook Air - mail with 32MB attachment appearing in "recovered messages" folder every 12 seconds

Problem with MacMail on MacBook Air
3 days ago I failed to send a mail with a large (32MB) attachment - and it is no longer in my outbox, draft mails or sent file.
BUT a copy of this same mail now appears every about 15 seconds in my "recovered messages" folder
I noticed when I received a system error saying I had a disk almost full issue - there were over 580 copies of the mail with 32MB attachment in the "recovered messages file"
I deleted them all, and deleted the Trash
BUT the message still keeps re-appearing every 15 seconds or so. So I keep deleting them.
Since then I have not been able to receive mail (altho' I am able to send) and Mail is VERY slow
I am running MAC OS X 10.6.8
I am running Mail version 4.6 (1085)

Also here's the log before it happened. As you can see there is no activity from 9:48 to 10:00 am when the sound occurred.
23/02/2014 9:48:12.792 am ntpd[52]: FREQ state ignoring -0.145411 s
23/02/2014 9:48:15.258 am WindowServer[96]: _CGXHWCaptureWindowList: No capable active display found.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000280
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319378: AirPort_Brcm43xx::powerChange: System Sleep
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319390: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
23/02/2014 10:00:04.000 am bootlog[0]: BOOT_TIME 1393167604 0
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".

Problem with SharedObject in AIR 3.5 IOS

Hi,
I've been compiling my ios app with AIR 3.4 since it has been released and a week ago I downloaded AIR 3.5 and uploaded my app compiled with AIR 3.5. But I realized there has been a problem with sharedobject in AIR 3.5.
I used var sharedObject:SharedObject = SharedObject.getLocal("myScores"); this code to save the game score and every time I uploaded my app it worked out. It has never lose the game score.
But with AIR 3.5 all game scores are gone. I didn't change any code about sharedobject. What's going on here? Now my customers will be upset to losing their information and even money they purchased through in-app purchase.
The thing is AIR 3.4 was fine but AIR 3.5 seems to be the problem.
Please HELP ME!!

We also replied in the bug report.
It is a really serious problem.
We experienced it also in AIR 3.7.
It is only happening on iOS. Android works fine.
It happens with these both methods:
var mySharedObject:SharedObject = SharedObject.getLocal("deutscheWitze");
FlexGlobals.topLevelApplication.persistenceManager.setProperty("soundCheck", "yes");
Only some users experience the problem.
We think it has something to do with the compilation or installation of the app.
Best
omi

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supp

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

I get error (-15006) when I try to connect air play true Apple TV. No problem with my old PC.mit with my Mac i get that error.

Hi, I get error (-15006) when I try to connect air play true Apple TV. No problem with my old PC. with my Mac i get that error.
It is true the Ithunes I get the problem.
What can I do to fix this.
I also have problem some times to conect to my Ipad to Apple tv. Some time I have to restart my Ipad to get conection to Apple t. whay is that ?
can some one help me ?

Hi whitwick,
If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L

Problem with installation of Adobe Air 2.6

Hi,
I've got a problem with installation of Adobe Air 2.6 under Mageia 2 Linux. The installation stops with an error. Here's the install.log:
[Adobe AIR Application Installer:8550][ERR] Application Installer end with exit code 7
[setup:11894][INFO] Runtime Installer begin with version 2.6.0.19170 on Linux x86
[setup:11894][INFO] Commandline is:
[setup:11894][INFO] No installed runtime detected
[setup:11894][INFO] Relaunching with elevation
[setup:11894][INFO] Launching subprocess with commandline /tmp/air.HmUPbw/setup -ei
[setup:11894][ERR] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="/tmp/air.HmUPbw/build/opt/Adobe AIR/Versions/1.0/Resources/rpmbuilder error : symbol not found: parseSpec, /usr/lib/librpmbuild.so: undefined symbol: parseSpec error : + umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ exit 0;+ umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' /tmp/air.HmUPbw/build '!=' / ']';+ rm -rf /tmp/air.HmUPbw/build;++ dirname /tmp/air.HmUPbw/build;+ mkdir -p /tmp/air.HmUPbw;+ mkdir /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ true;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe;błąd: Nie odnaleziono pliku: /tmp/air.
HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml" errorID=1]
[setup:11894][ERR] Runtime Installer end with exit code 7
How can I solve this problem? Thanks in advance for help.

I'm not certain that Mageia 2 Linux is supported. This Release Notes page and this Install Help page don't mention Mageia, just
Fedora Core 12, Ubuntu 9.10, OpenSUSE 11.2.
Roy

I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

As I wrote Apple will diagnose an Apple product even if it is out of warranty for free. That should be your first step to find out if the problem is the battery or something else.
Once you have Apple telling you a 7 month old battery is defective (if that turns out to be the case) then it becomes a game of horse trading. You'll need to speak to the tech and when he tells you there is nothing he can do you will need to speak to the tech manager and when she says most likely there is nothing they can do you go to the store manager, etc. It is unlikely (though possible) that they will give in easily you need to be firm, polite and let on that you're willing to accept a partial reimbursement.
So again the first step is to find out what is wrong.
good luck

Problems with iomega External Hard Drive on MacBook Air

Hi community!
I'm experiencing some problems with my MacBook Air and an external hard drive and I'm wondering if anybody would be able to help me out.
I own a MacBook Air running Mac OS X 10.7.3. When I connect my iomega 500GB external hard drive, the Finder is able to pick it up, but when I click on the drive name, it spins forever without the Finder responding for a long time (it basically crashes the Finder with a spinning ball staying forever). The light on the external hard drive flashes intermittently when I first plug it in, but after that stays constantly lit. So I guess the disk has power, but something else is wrong with it.
It was working fine earlier today but I accidentally pulled the cable out while the disk was working. I'm hoping this hasn't permanently damaged my drive.
Any help on what I could do to fix this issue would be greatly appreciated. Thanks!
SV

You might try launching Disk Utility, and then select the drive in question to run a "Verify disk" on the drive. This may indicate any errors in the file system of the drive that might be preventing the successful reading of the disk.
If the disk is empty, you may want to re-partition and reformat, so as to start with a "clean slate".

Hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

Try reinstalling Combo Update.
http://support.apple.com/kb/DL1676
Best.

AIR 1.1 vs AIR 1.5 problem with z

Similar Messages

Maybe you are looking for