AIR for Apple iOS Support in Flash Builder is not installed.

I've written an application in Flash Builder and I'm now attempting to get it running on an iPad.
I am running on a Mac (OSX 10.6.7)
I have FB 4.5 installed and downloaded the separate 4.5.1 update file successfully updated FB to 4.5.1.
I have downloaded and installed AIR 2.7.
I have downloaded and installed the AIR sdk.
I have an iOS developer account and have created my developer certificatn p12 file, created an Apple Id for my application and a provisioning profile.
I created a new "ActionScript Mobile Project" for my application and enabled the Apple iOS platform.
I have entered my certificate and provisioning information into FB.
I created a "Debug Configuration" for my project.
When I run my debug configuration, I am prompted for my Certificate Password (which I enter).
I then receive a pop-up message with the following error:
"AIR for Apple iOS Support in Flash Builder is not installed. To enable packaging support for Apple iOS follow these instructions."
The link for the instructions links to the following knowledge base article:
http://kb2.adobe.com/cps/899/cpsid_89938.html
I have Flash Builder as a part of the CS5.5 Web Premium (on DVD), which does not appear to have a "AIR for Apple iOS Support" option during the FB installation.
So I followed the manual installation steps provided (although copying the described folders to my sdks/4.5.1 folder (rather than the sdks/4.5 folder).
However, doing the above did not resolve the issue. I still get the same error message as before.
Has anyone else encountered this issue, or have any suggestions on how to resolve it?
Thanks in advance.

In case anyone else runs into this issue:
This problem was solved in this other thread in the Adobe AIR Installation Issues forums:
http://forums.adobe.com/thread/867868?tstart=0
Craig.

Similar Messages

  • Update Failed: AIR for Apple iOS support

    While Updating my Flash Builder 4.5 to 4.5.1, and 2 other updates, one being the AIR for Apple iOS support.
    When I try installing the update for the iOS support, I get the message: Update is not applicable. Error Code: U44M1P28

    Trying to figure out another solution, I uninstalled Flash Builder 4.5 Premium, to install a new full version of 4.5.1 from Adobe's website.
    While Installing, I get the following message which showed me exactly where my problem is... I have a prereleased version of AIR for Apple iOS Support.
    The Question is... How do I uninstall the prerelease version of AIR for Apple iOS Support? I uninstalled FB4.5, and I removed the remaining folder after installation that was in Flash Builder 4.5 that was in Utilities. though, I still get the message above...
    Any idea on how to Uninstall a Prerelease version of AIR for Apple iOS Support?! No where to be found online.

  • Flash Builder 4.5 support for Apple iOS

    Hi All,
    Its really good to hear that FB 4.5 has come with support for Apple iOS. Out of my curiosity I tried downloading the latest FB 4.5 trial version and create a sample mobile app , but to my surprise 'Apple Platform' was not listed under 'New Flex Mobile Project' wizard and appears only under 'Actionscript Project', Can anybody there help me in craeting a flex mobile project for iOS?
    Thanks.

    Dear Flexer,
    At this time, you can only create an AS project for iOs.
    I heard, that whis realease of Flash Builder 4.5 you can create mxml
    project for all plateform.
    Best regards
    Isabelle LOYER
    InterSystemes
    20 rue de Montubois
    95840 Bethemont la Foret
    Tel : 33 +1 34 69 22 66
    Fax : 33 +1 34 69 26 28
    email : [email protected]
    www.intersystemes.fr
    www.intersystemes.net
    Le 20/06/11 10:29, Arun Ganesh a écrit :
    me to waiting for the response
    >

  • Flex iPad Application : Run code before application enters background  Application Type: Flex Mobile Application Target Platform: iPad AIR Version: 4.0 Development Environment: Flash builder 4.6  I want to run some code just before iphone application goes

    Application Type: Flex Mobile Application
    Target Platform: iPad
    AIR Version: 4.0
    Development Environment: Flash builder 4.6
    I want to run some code just before iphone application goes into background. I need function similar to didEnterBackground
    of native xcode app
    (https://developer.apple.com/library/ios/documentation/UIKit/Reference/UIApplicationDelegat e_Protocol/Reference/Reference.h
    tml#//apple_ref/occ/intfm/UIApplicationDelegate/applicationDidEnterBackground:)
    I tried using devactivated function of flash.display.STAGE.
    I used following addEventListener:
    STAGE = this.parent.stage;
    STAGE.addEventListener(Event.DEACTIVATE, onAppDeactivated);
    It worked for me but only when device is connected to development environment in debug mode. When I create my release build
    it is not working.
    So how can I make sure that my code runs before application goes into background.

    Even I am facing almost same issue
    Problem installing Adhoc version to iPhone and iPad - Development Environment Is - Adobe Flash CS6

  • Starting iOS development with Flash Builder 4.6

    Hi guys,
    I want to start iOS development with Flash Builder 4.6. I have iPad 2 with iOS 6 installed (latest version available).
    I was following this tutorial step by step: http://help.adobe.com/en_US/flex/mobileapps/WS064a3073e805330f6c6abf312e7545f65e-8000.html #WSe4e4b720da9dedb5-27e02e9a12ee20e4a60-7fff
    As a part of it I also did this:
    Convert a developer certificate into a P12 file - http://help.adobe.com/en_US/as3/iphone/WS144092a96ffef7cc-371badff126abc17b1f-7fff.html
    Installed AIR SDK version 3.4.0.2540 as for 4.5 (I have 4.6) - http://helpx.adobe.com/flash-builder/kb/error-run-debug-deploy-ios.html
    I try Now I am getting the follwoing errors:
    Error occurred while packaging the application:
    SDK is missing file /Applications/Adobe Flash Builder 4.6/sdks/4.6.0/lib/aot/lib/AIRInterpreter
    Error occurred while packaging the application:
    SDK is missing file /Applications/Adobe Flash Builder 4.6/sdks/4.6.0/lib/aot/bin/ld64/i686-apple-darwin9-ld64
    Required files are missing indeed. But where can I find them if AIR SDK doesn't have them? What should I do now?

    All the files in lib/aot/ are part of the AIR sdk.
    You'll have to overlay the AIR sdk on top of the Flex SDK (which comes with FlashBuilder).
    On windows, simply copy-paste the AIR folder on the Flex SDK folder. (merge the two folders)
    On mac, use a command line and ditto the AIR sdk folder on Flex SDK folder.

  • Flash builder 4.7 iOS Debug Binary (IDB) component  is not installed.

    I get the error below consistantly. Is the IDB supposed to be part of the flex 4.6 sdk or part of an air sdk? (I've not seen it in either)
    Some components required to launch the application were not found. Please reinstall the AIR SDK and try again.
    The iOS Debug Binary (IDB) component  is not installed.

    Hi ,
    Flex SDK 4.6 has AIR 3.1 which doesn't have the support of IDB. So, if you wanted to use USB debugging for iOS, please create an ActionScript Mobile Project which has AIR 3.4 that supports IDB, else download the AIR SDK 3.4 and overlay it on Flex 4.6 SDk.
    AIR SDK download link: http://www.adobe.com/devnet/air/air-sdk-download.html
    Overlay help document link : http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk. html
    Hope this helps.
    Thanks,
    Hari

  • After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But wont work anywhere now

    After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But won't work anywhere now.  I tried re-setting but has not worked.  Any ideas would be appreciated.

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • Does adobe reader for android/ios support digital signature?

    does adobe reader for android/ios support digital signature?

    when to support digital signature in adobe reader for android/ios?

  • Adobe AIR for Playbook - Cookies supported?

    Adobe AIR for Playbook - Cookies supported?
    Following a discussion on - http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/Cookies-supported/m-p/6 36455
    Has anyone here or at Adobe seen this thread to consider if it is an AIR issue?
    Sorry if this is the wrong forum to post in.
    TIA
    -SR

    Hi SR,
    I wanted to let you know that while we typically don't handle Playbook issues on this forum (the RIM forum you linked to is the correct place for these discussions) I have forwarded this question along to the team to see if anyone has encountered this.  I'll post more info when I hear back.
    Thanks,
    Chris

  • Does anyone have the #  for apple customer support?

    does anyone have the # for apple customer support?

    1 800 MY APPLE
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • Flex mobile 4.6 app works inside flash builder but not in android emulator

    Originally posted on stackoverflow: http://stackoverflow.com/questions/8663892/flex-mobile-4-6-app-works-inside-flash-builder- but-not-in-android-emulator
    I have a basic flex mobile 4.6 app and it works fully fine in the flash builder built-in emulator using an android device profile like aria...
    It also launches fine in the android emulator but one particular view shows blank (and this view works fine in flash builder).
    Before I get in to many details of the view are there any categorical gotchas that can be causing this?
    I can't seem to get the trace statements from the app to show in 'adb logcat'. It seems I need to compile a debug version of the apk but I don't know how to do this. I use the 'Export Release Build' from the Project menu in flash builder and it doesn't seem to have an option for debug=true.
    The problematic/blank view basically uses the stagewebview and iotashan's oauth library to call linkedin rest apis... A different (and working) view can make restful web service calls in the emulator fine, so it doesn't seem to be an internet permission.
    The source code contained in the problematic/blank view is almost identical to the tutorial found at:http://www.riagora.com/2011/01/air-and-linkedin/
    The differences are: a) The root tag is a View b) I use StageWebView instead of HtmlContainer c) I use my own linkedin key and tokens.
    I would appreciate it if someone can provide me with some pointers on how to troubleshoot this situation. Perhaps someone can tell me how to debug the app while running in the emulator (I think I need the correct adt command arguments for this which matches the 'Export Release Build' menu but adds the debug param?)
    Thanks for your help in advance.
    Comment Added:
    I suspect that this has to do with connections to https:// api.linkedin.com and https:// www.linkedin.com. The only reason I can think of that the same code is not having issues inside of Flex Builder but indeed having issues in the Android emulator is something to do with certificates. Any ideas?

    Thanks er453r,
    I have created a project that clearly reproduces the bug.  Here are the steps:
    1) Create a UrlLoader and point it to https://www.google.com (HTTPS is important because http works but HTTPS does not)
    2) Load it
    3) Run in Flash Builder 4.6/Air 3.1 and then run in Android emulator.  The former works with an http status 200.  The latter gives you an ioerror 2032.  I am assuming what works in Flash Builder is supposed to work in the Android Emulator and what what works in the emulator is supposed to work in a physical device (plus or minus boundary conditions).
    I see a certificate exception in adb logcat but not sure if it's related...
    Here is the self contained View code which works with a TabbedViewNavigatorApplication:
    <?xml version="1.0" encoding="utf-8"?>
    <s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                        xmlns:s="library://ns.adobe.com/flex/spark"
                        xmlns:mx="library://ns.adobe.com/flex/mx"
                        xmlns:ns1="*"
                        xmlns:local="*"
                        creationComplete="windowedapplication1_creationCompleteHandler(event) "
                        actionBarVisible="true" tabBarVisible="true">
              <fx:Script>
                        <![CDATA[
                                  import mx.events.FlexEvent;
                                  protected var requestTokenUrl:String = "https://www.google.com";
                                  protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void
                                            var loader:URLLoader = new URLLoader();
                                            loader.addEventListener(ErrorEvent.ERROR, onError);
                                            loader.addEventListener(AsyncErrorEvent.ASYNC_ERROR, onAsyncError);
                                            loader.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
                                            loader.addEventListener(HTTPStatusEvent.HTTP_RESPONSE_STATUS, httpResponseStatusHandler);
                                            loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
                                            var urlRequest:URLRequest = new URLRequest(requestTokenUrl);
                                            loader.load(urlRequest);
                                  protected function requestTokenHandler(event:Event):void
                                  protected function httpResponse(event:HTTPStatusEvent):void
                                            label.text += event.status;
                                            // TODO Auto-generated method stub
                                  private function completeHandler(event:Event):void {
                                            label.text += event.toString();
                                            trace("completeHandler data: " + event.currentTarget.data);
                                  private function openHandler(event:Event):void {
                                            label.text +=  event.toString();
                                            trace("openHandler: " + event);
                                  private function onError(event:ErrorEvent):void {
                                            label.text +=  event.toString();
                                            trace("onError: " + event.type);
                                  private function onAsyncError(event:AsyncErrorEvent):void {
                                            label.text += event.toString();
                                            trace("onAsyncError: " + event);
                                  private function onNetStatus(event:NetStatusEvent):void {
                                            label.text += event.toString();
                                            trace("onNetStatus: " + event);
                                  private function progressHandler(event:ProgressEvent):void {
                                            label.text += event.toString();
                                            trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal);
                                  private function securityErrorHandler(event:SecurityErrorEvent):void {
                                            label.text +=  event.toString();
                                            trace("securityErrorHandler: " + event);
                                  private function httpStatusHandler(event:HTTPStatusEvent):void {
                                            label.text += event.toString();
                                            //label.text += event.responseHeaders.toString();
                                            trace("httpStatusHandler: " + event);
                                  private function httpResponseStatusHandler(event:HTTPStatusEvent):void {
                                            label.text +=  event.toString();
                                            trace("httpStatusHandler: " + event);
                                  private function ioErrorHandler(event:IOErrorEvent):void {
                                            label.text +=  event.toString();
                                            label.text += event.text;
                                            trace("ioErrorHandler: " + event);
                        ]]>
              </fx:Script>
              <fx:Declarations>
                        <!-- Place non-visual elements (e.g., services, value objects) here -->
              </fx:Declarations>
              <s:Label id="label" y="185" width="100%" color="#0A0909" horizontalCenter="0" text=""/>
    </s:View>

  • Apple application support version 1.4.1 is installed error

    I keep getting this error when I attempt to open itunes after upgrading to the latest version. 10.1.1
    Apple application support version 1.4.1 is installed, itunes requires apple application support version 1.3.2 or later
    Does anyone know what to do about it?
    I have already uninstall the entire program and all its components 3 times. Still, same error after re-installing.

    Bang goes another theory. Okay, let's try putting your AAS 1.4.1 back. (Fingers crossed, iTunes will notice it properly this time.)
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Question on CCloud Flash Builder 4.6 install

    Hello,
    I curretly have Flash Builder 4.6 installed on my computer - it was originally installed as FB4.5 when I installed MC CS 5.5  -- but the 4.6 version was made available as a separate installation from MC.5 when it became available last November -- so I now have FB 4.6 as a stand-alone install.
    My question is this -- do I need to uninstall my stand-alone installation of FB4.6 in order to install MC6 via my CCloud subscription (when it becomes available on May 11) -- or will the FB 4.6 install in CS6 install without errors (in a different location?). The reason I would like to do this is that FB can sometimes be buggy and I have the current install working well. I would like to install the new FB 4.6 and make sure i works and compiles well before uninstalling  last December's stand-alone verson of FB 4.6.
    Thanks 

    Thanks David,
    Just two questions
    1. Is the FB 4.6 version in CC the same as the FB 4.6 I installed in December, or is it a newer release (eg 4.6.2 etc)? If the CC version is the latest would want that
    2. If I did keep my current FB4.6 -- would the CC "know" that it should receive the latest updates. I keep reading where CC apps are always up-to-date with latest releases and builds -- so if I have an "old" FB4.6 -- would the CC updater give it the same updates as if I had installed it directly from CC?
    Thank you

  • I cannot buy anything on my iphone 5(v.6.0.2) and it say itune version not support this purchase. or itune not install correctly.do i need to update IOS version?

    can anyone tell me why?it just say : Your Purchase Could not be completed
    Purchase Failed : Your Itunes version does not support this purchase, it was not installed correctly. or you're not sign into a itunes account.
    why?
    or i need to update latest IOS?

    Try to do a reset, if it doesn't work try remove recently added apps this may solve your problem ( like google app because it has happened with me)
    Take a look at apps using your location service in privacy, it can cause battery draining.

  • AirPort Utility 5.6 for Mac OS X Lion The installer will not install because it states the OS is not supported. I have the latest

    AirPort Utility 5.6 for Mac OS X Lion The installer will not install because it states the OS is not supported. I have the latest

    Part of your message was not included. Can you re-post with details again please?

Maybe you are looking for