Airplay and home sharing does not work with my 2nd gen apple tv

though my 2nd gen apple tv with version 7 and my iphone 4s with ios 8.0.2 are connected to the same wifi network, airplay and home sharing doesnt show up in my itunes nor in my phone! what should i do?

Hello there, Ashwin.
The following Knowledge Base articles offers up some great steps for troubleshooting issues with both AirPlay and Home Sharing, respectively:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
http://support.apple.com/kb/ts4215
and
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • Home sharing does not work with apple tv

    Can anyone help me.  I used to be able to stream all content from my home master computer to my Apply TV.  Now it suddenly does not work.
    Apple TV itself works just fine.  I can also airplay using it with out IPADs.
    I have uninstalled and reinstalled Itunes.  Reset the modem/router.  Reset Appletv.  Tried with Norton disabled.  etc.
    Nothing seems to work. 
    I keep getting the 'Turn on your home sharing in Itunes' message.   But it is on.
    Help is appreciated.

    Welcome to the Apple Community.
    Sometimes just disabling Norton isn't enough, you may need to hunt down every last file it has written to your computer then re-install iTunes. I understand Norton can be quite a nasty little intrusion.
    I know very little about PC's or security software as I have neither, but the following article might help you.
    Troubleshooting Security Software

  • Home sharing does not work with iTunes 12

    I have been using home sharing with iTunes a lot, mainly to stream TV shows from my Mac Pro (2008) to my Apple TV (3rd Gen). But after installing Yosemite and iTunes 12 it doesn't work any longer. My Apple TV finds the iTunes Library, but can't connect with it. At the same time home sharing worked just fine with my iPhone 5 and iPad 2 (iOS 8.0.2). After installing iOS 8.1 home sharing with my iOS devices doesn't work, too – same problem as with Apple TV: iTunes library is found but devices can't connect with it.
    I already tried to solve the problem with the suggestions on Apples troubleshooting page:  Fehlerbehebungsmaßnahmen für die Privatfreigabe
    My setup:
    Mac Pro (2008) with OS X 10.10 (14A389), iTunes 12.0.1.26, connected via Ethernet and WiFi
    Router: Fritz!Box Fon WLAN 7270
    iPhone 5 with iOS 8.1
    iPad 2 with 8.1
    Apple TV (3rd Gen), newest software update, connected via Ethernet
    Any ideas, what the reason for that problem could be and how to solve it?
    Thanks a lot in advance.
    BTW: Sorry for my English. I am not a native speaker.
    Greetings from Germany

    I had the same problem after updating to iTunes 12 and using my iPhone 6.
    I have solved it by doing these simple steps:
    1. Turn off Home Sharing in iTunes. Close it.
    2. In your iOS 8 device, Turn on Home Sharing: Settings/Music/Home Sharing
    3. Open back iTunes
    It looks like in one of the updates, possibly iOS 8.1, had signed off Home Sharing completely.

  • My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

    My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

    My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

  • Home Sharing does not work. It's time for Apple to act.

    My specific question: Does anyone from Apple read these discussions *and* use the information to fix iTunes?
    My issue (and I've given up on this): Home Sharing does not work and it needs to be fixed. I use a Windows 7 based PC and can successfully access my iTunes library from my iPad, meaning all network requirements are met. However many artists and albums do not appear. I know this is not about the tagging/data for the albums.
    I found recommendations in these forums regarding the iTunes database (.itl), that this is a sign that the database is corrupted, and how to re-create it from the xml version. I used this technique and it did fix the problem - all albums and artists appeared. But within a day or so, they disappear again, meaning the .itl file is corrupted again and has to be re-created again. Also - if the .itl file is corrupted, then why does everything appear fine in iTunes? Somewhere, somehow the data are good enough to make iTunes work properly.
    Bottom line: If you can't get the basics right, then Home Sharing does not work. Some very helpful forum commenters said it could have something to do with the anti-virus software, but that is just passing the buck.  I should not have to know how to do all this. I should be able to turn on Home Sharing and enjoy the music from my iPads, iPhone, etc. Imagine you have to know how fuel injection works and be able to fix it every two days just to use your car - you should be able to turn the key and drive.
    There are more problems - I won't even get into how the album won't display properly on the iPad and other annoyances.
    Apple? Are you listening? Home Sharing does not work. It is the opposite of the image projected of easy-to-use, people-friendly products.
    I suggest you either make it work or turn off the feature.
    Joe

    If your database is constantly becoming corrupt, you have a problem on your computer, it is nothing to do with homesharing. The corrupt database does not affect iTunes because that uses another file. It's not passing the buck, by considering whether anti-virus software might be causing this, this is the sort of stuff anti-virus software does (although I'm not saying that's what it is in your case-I don't know at this stage), you can't hold Apple accountable for badly written software that you have put on your computer yourself.
    If you can't correctly identify what is causing your problem, you are never going to fix it.

  • Updated itunes now home sharing does not work

    i updated my itunes from 10.2 to the new 10.3 but now my home sharing does not work. the apple tv can not see the computer..my apple tv has the latest updated software as well. any help would be appreciated.. this seems to be an on going thing with apple lately where updated software causes more hea

    Troubleshooting Home Sharing
    Troubleshooting Home Sharing with Apple TV (2nd generation)

  • ITunes 9 Home Sharing does not work on Windows 7 x64

    iTunes 9 Home Sharing does not work on Windows 7 x64.
    Getting the following error message:
    Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
    This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
    I've just upgraded my iPhone to OS 3.1 using it this morning.
    Please advise.
    Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
    Ivan Farkas
    <edited by host>

    I am using Windows 7 x64.
    I am running iTunes 9.0.2.25
    I am running Mcafee.
    I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
    YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
    I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
    I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
    P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
    Message was edited by: turcott

  • My Home Sharing does not work any more after latest iTunes update

    After iTunes update to 11.1.3 my Home Sharing does not work any more!
    It worked just fine for several years...
    I tryed to do everything I could find on Apple support... NOTHING works.
    Most of Apple so called updates turn out real crap...
    I am wondering whats happening to Apple?...

    Hello igor_rena,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Best of luck,
    Mario

  • How can you start up your ipod if holding the hold and home button does not work?

    how can you start up your ipod if holding the hold and home button does not work?

    Remi,
    How long did you hold these buttons for? Did you try more than once?  Have you tried letting it charge for a bit and trying again?
    If nothing else, see this article for more troubleshooting assistance.
    http://support.apple.com/kb/TS2771
    B-rock

  • Home sharing does not work after update to snow leopard 10.6.4 and iTunes 9

    I am using home sharing since about a year without any problems. After updating to snow leopard 10.6.4 and iTunes 9.2 it suddenly does not work anymore.
    On my iMac and my Mac Book Pro I get error code 3259 and it tells me to check my firewall and to enable Port 3689.
    I did not change anything in the firewall settings, itunes on both allows data traffic in both directions. I also do not find any option to activate a port ( also wondering why this is suddenly now necessary)
    I deactivated home sharing on both machines and enabled it again. It still does not work.
    On both machines iTunes displays the the library on the left side but like said it is not accessable
    With Finder I can access the other computer from both machines without any problem.
    Any help to solve this would be very much appreciated

    first of all, if you are behind a router firewall, and have your network secured (WPA2 and a long, non-dictionary password made up of letters and numbers), you don't need the software firewall on your Mac(s).
    @ least turned if off for troubleshooting purposes.
    turn home sharing off on both computers, and make sure
    (a) both Macs have access to the internet
    (b) iTunes on both machines is authorized for the same iTunes account.
    turn home sharing back on on both Macs.
    does it work ?
    JGG

  • Home Sharing will not work with my Windows 8 64bit with new itunes.  All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App.  They all did before.  Only thing that has changed is new PC/itunes.  Any Ideas?

    Installed a new Windows PC on my home network.  PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit.  My itunes works, but I can not get Home Sharing to function now.  None of my Apple TV's can see my computer library and prompt me to turn it on.  All of my iphones, pods, pad, can not use the "Remote" app.  When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code.  I have reloaded iTunes, reset my router, updated all devices.  You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to.  Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before.  However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV.  Growing fustrated.  Any ideas, would be helpful.

    Cunning1_
    You are a legend!!  I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!!  I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!!  Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
    Whatever - one step and now I can enjoy my music through my house again!
    Thank you, Thank you, Thank you 

  • Home sharing does not work as standard windows user

    I have two computers in my home network - Windows 7 Professional Desktop and a Windows 7 Professional Laptop.
    Both running latest itunes 11 software.
    Win7 Desktop has two accounts: Administrator and JB (a standard user)
    Win7 Laptop has two accounts: Administrator and JB (a standard user)
    Home Sharing is enabled on both using the same apple ID.
    I can log in on the desktop as JB/standard user and see my apple TV.
    I can log in on my laptop as JB/standard user and do NOT see my apple TV ( the airplay icon is just missing).
    Additionally - I do not see "shared" libraries on either machine.
    On the laptop, if i open itunes by "run as administartor" I am then able to see the other "shared library" and ALSO see the apple tv Airplay icon.
    Not able to figure out why I cant see home sharing or the apple tv Airplay icon unless I run as an administrator on the laptop.

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • Emagic mt4 and intel iMac does not work with 10.4.5

    Hi there,
    after updating my iMac on 10.4.5 my MT4 does not work any longer. It is still shown in the system profiler! But that`s it! After I`ve installed the latest driver (emagic v1.7), it was not shown in the audio/midi preferences. On my G4 with 10.3.9 it is still working properly. I have tried to use it with Garage Band 3, while I am waiting for Logic Pro 7.2 . It worked in the begining, but now the USB connection on the MT4 does not light up, but the midi devices. My question is: Do I need a driver using Logic Pro 7.2 with an Intel iMac? Includes the update the driver for Emagic MT4?
    thanks a lot for any reply, experiences and clues
    jay markus
    iMac Intel core 20''   Mac OS X (10.4.5)  

    Hi Glyn,
    I will try to get some driver information of apple. Emagic is apple now, so who else could that know?! I use an m-audio fw audio-interface. For that m-audio got a driver and it works by now. Fortunately! I will tell you if apple got a clue.
    Thanks for reply ( So I am not the only one in universe with that problem!)
    Best regards
    Jay
    iMac Intel core 20''   Mac OS X (10.4.5)  

  • Windows 8 home sharing does not work anymore

    look iv'e tried it all .. every suggestion in the book , ethernet settings i have windows 8 and now home sharing no longer works,
    i'm so frustrated now, please don't ask me to repeat anything you've heard ar tried before i've tried ir
    clean up .net
    turn off ipv6
    reinstall itunes
    i've always had apple products and i really feel i'm at the end now. as soon as you upgrade something apple .. it hurts you, why o why do they do this??? my mind just boggles,
    "lets make it crapper!!!" thats what they say at upgrade meetings,
    no music throughout my house now, so annoyed,
    i'm moving to nexus tablets phones and chromecast, i really have had it wasting my time fixing apple's crap that worked fine till i "upgraded"
    sorry for rant just at the end of my tether

    Home Sharing works once after I start iTunes on the Mac.
    Next time I want to watch a film, it justs hangs and says it cannot connect to my iTunes library.
    I have the same issue on 5 ATVs round the house (some wired some wireless), I have tried fixed and DHCP IP addressing, I have moved the Mac to be on the same switch as one of the ATVs and  the problem is still there.
    I have tried a different Mac running Mountain Lion and the same thing happens.
    At the moment in order to watch a film I have to use Remote Desktop to log onto the Mac and stop and start iTunes then the ATV sees the library. Watch film. Move to other room, fire up ATV no library, use Remote Desktop, rinse and repeat....frustrating isn't the word.

Maybe you are looking for

  • Problem with update a table

    Hi, --I need to update a table with only  year 2010  data, it looks like this: update abc_tab set dept_cd = replace(dept_cd, 'HRE','HW') where dept_cd in (select dept_cd from edu_tab e, edu_lkp l where l.dept_rnd_cd =e.dept_rnd_cd and l.fy_cd ='2010'

  • Email Attachments on the E61

    I have a problem opening attachments on my E61. It doesnt open ANY attachments e.g. pdf. jpeg. etc. I use the blackberry connect/Instant-Email. Can anyone help me with this??? Please!!!

  • Ipod Video will not restore

    My ipod says "connect to your computer. use itunes to restore." So I plug it into the computer and itunes says it needs to restore, so I click restore, everything seems to go fine, and it says the ipod needs to restart, it does, has a lil progress ba

  • SQL Deployment / SQL repair fails

    Hi All, I installed my SQL server Express setup 2008 r2. The installation failed but i am still able to use SQL. Then i upgraded the Express to Data center edition I wanted to install SQL 2008 r2 sp1 when i install it says cannot upgrade please repai

  • Iview for Webdynpro ABAP application with TimedTrigger

    Hello, I created an IView  for a WebDynpro  ABAP  application. This application uses a UI element TimedTrigger. Without portal integration this TimedTrigger works fine. Inside an IView  this TimedTrigger element does not work anymore. Did anyone have