AirPlay doesn't work when streaming from BBC iplayer unless I use mirroring

I usually watch iplayer and 4OD by streaming it from my iPad or iPhone onto my tv with AirPlay on apple tv but now all of a sudden I've been getting a connection error and the stream fails. It does still work when I use mirroring (which doesn't make sense to me) but mirroring won't fill the screen the way AirPlay does and it also makes my phone run hot since it can't blank the screen.
Any ideas what's going on?

Try restarting the Apple TV, it works fine for me so it's not the iPlayer.

Similar Messages

"Fullscreen" parameter doesn't work when streaming from .qtl metafile.

The Mac QT player functions properly with the following code, but the Windows QT player zooms in on the video instead of sizing it properly to fill the screen. Here's an example of my .qtl file:
<?xml version="1.0"?>
<?quicktime type="application/x-quicktime-media-link"?>
<embed src="rtsp://myquicktimeserver.com/foldername/movie.mov" autoplay="true" fullscreen="full" quitwhendone="true" />
I've seen the issue on multiple Windows PCs, so I'm sure its not localized to one installation. Any clues?
Thanks!
Windows XP Pro

well, it seems that i solved this problem by putting
frame.show()
before
frame.setFulleScreenMode()
and it now works... but why????

Video doesn't work when calling from Jabber to DX650

Hi,
I just added a DX650 to our CUCM 9.1.2. When I call from either Jabber to the DX650 or Lync to DX650, the video doesn't work and the call is audio only. The message i'm seeing on Jabber is something like "the other endpoint is not accepting video." Sorry i don't remember the exact message. Has anyone seen this issue before? Thanks!

Lync is not standards based and has proprietary codecs for video. You will need a Expressway with the MS Interop key to get video both ways.
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-2/Cisco-VCS-Microsoft-Lync-Deployment-Guide-X8-2.pdf

Ipod nano 1st gen doesn´t work when disconnected from itunes

I can´t do anything, it doesn´t even turn on, only work when connected to itunes, the moment i unplug it from the computer it stops working, please help!

For anyone else having this problem, I found this solution to work. Try this first:
a) Get Windows to restart the drivers:
    - disconnect your USB device and close ITunes
    - connect your USB device
    - if ITunes loads, close it.
b) File explorer:
Open File explorer and browse to
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
In that folder there should be a set of files named "usbaapl64...."
right click on the one ending in "INF"
Select Install. It's very quick.
remove the USB device
c) Restart the computer.
When you login again, load ITunes before you attach your USB device.
d)If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job. Hope it helps.
<Link Edited by Host>

Flex app doesn't work when moved from original location

I'm trying to make an image gallery in flex. It works when I run it in Flex Builder perfectly fine. The html and swf files from the bin-debug folder work perfectly fine when opened in any browser also, but ONLY when those files and all related files are opened from the default location that the application was built in. When I export a build to a different folder, the swf loads but none of the information from the xml file displays. I tried setting all of the paths of the reference files (namely the xml) in the flex app to the exact absolute location on the server, and it still didn't work when I uploaded it to the server.
I've tried several approaches starting from scratch and they have all come up with the same issue. I'm working with an educational license for Flex Builder, I'm not sure if they jip you on those and ruin the compiled swf.
Please help! I'm losing my mind over this.I think it has to do with something else besides the code since it works fine when I hit "Run", but if anyone thinks it will help to post the code let me know.

when you build an application using one of the wizards (like coldfusion flex application wizard) it hard codes
paths to cold fusion CFC's, and sometimes gets it wrong.
If your application references cfc's (or other remote objects) then it may be necessary to adjust the flex code
when moving the code into a different base folder.
For example in my own application, the url is http://localhost/crm_dev_flex and the built application gets put into
c:\inetpub\wwwroot\crm_dev_flex\bin-debug
References in the code to components found in c:\inetpub\wwwroot\crm_dev_flex\bin-debug\components\cfgenerated
(in the flex code these looks like crm_dev_flex.bin-debug.components.cfgenerated.<mycomponent> )
These need to change when you move the code to somewhere else.
Also, if you are using wizard generated cfc's then these also contain similar references that need to be changed.
IHTH.
Cheers

WebUtil doesn't work when called from WHEN-NEW-FORM-INSTANCE trigger

I need WEBUTIL_CLIENTINFO functions to know some information from the client, like IP, JavaVersion, Hostname, OS user, etc. This functions I call through WHEN-NEW-FORM-INSTANCE TRIGGER and this doesn't nor work. I obtain the next message and error:
oracle/forms/webutil/clientinfo/GetClientInfo.class not found. WEBUTIL_CLIENTINFO.GET_IP_ADDRESS.
But when I call this WebUtil functions through WHEN-WINDOW-ACTIVATED trigger or through a button it works. Why?. I need call WebUtils in the WHEN-NEW-FORM-INSTANCE trigger!
Any help will be of great value.

Basically make a timer...
Do you have the wu_test_106.fmb file that comes with the webutil install?
If you look in the wnfi trigger you will see this...
declare
     fake_timer TIMER;
begin
     -- Purpose of the fake timer is the we cannot call webutil in this trigger since the
     -- beans have not yet been instantiated. If we put the code in a when-timer-expired-trigger
     -- it means that this timer will not start running until Forms has focus (and so the webutil
     -- beans will be instantiated and so call canbe made.
     fake_timer:= CREATE_TIMER('webutil',100,NO_REPEAT);
     --create_blob_table;
     null;
end;And in the form level when-timer-expired you will see this...
     :global.user_home := webutil_clientinfo.get_system_property('user.home');
     :OLE.FILENAME := :global.user_home||'\temp.doc';
     SET_ITEM_PROPERTY('builtins.text_io_item',PROMPT_TEXT,'Write to '||:global.user_home||'\helloworld.txt');
     SET_ITEM_PROPERTY('files.userdothome',PROMPT_TEXT,:global.user_home);

Keyboard & mouse doesn't work when restarting from battery dying.

When my battery dies, I go to put it back on the charger. Once it is done loading the main log on screen, neither the keyboard or mouse won't work for a good minute or so. Once the screen turns black, then comes back, it works. Any ideas? Thanks!

Try plug an usb keyboard and a usb mouse. If the problem persists, you may reset the SMC and nvidia/PRAM memory.
If that doesn't do it, run the Apple Hardware Test .
Cheers,

ISight doesn't work when chatting from south america?

I have a MacBook and was able to successfully iChat with my home G5 (10.4.7) desktop no problem. Now I'm working in Uruguay and everytime I try to iChat with my home computer it tells me that the communication is not possible. Does this have to do with the DSL service I have in Uruguay? I'm quite upset cause I actually got the iBook in order to iChat with my family when I'm overseas...
FYI: ALL FIREWALLS from both computers are off...

It could be the DSL service, or it could be the DSL modem or your router.
I would try video connections from an Internet cafe or from another Internet connection.

Download indicator doesn't work when downloading from Itunes

Using my Mac OS mountain lion and Firefox ver 31.3 ESR when I download Itunes from https://www.apple.com/ca/confirm/itunes/thankyou.html It appears to go to Apples network 10.x.x.x but does not download and the download indicator shows no visible downloads proceeding.

I placed Firefox 31.3 for the Mac in Safe mode and the same thing occurred. Going to download Itunes from https://www.apple.com/ca/itunes/download/
it goes through the steps for file placement but does not show in the downloads of Firefox and does not appear to download.

Subreport doesn't work when upgrading from Crystal 7 to Crystal 2008

I am using a subreport, whose input parameter is input to the Stored procedure.
This used to work fine in Crystal 7. But now we upgraded to crystal 2008.
The same code throws an exception. can any one please help?
Here is the piece of code of stored proc
ALTER PROCEDURE SUMMARYACTIVITY(@HcpID varchar(8)) AS
BEGIN
SELECT @HcpID, RX_PROD_ID, RX_PROD_DESCR, DATE_REP_TERR, NOTE, SAMP_VOUCHER, DISP_ORDER FROM #SUMACT ORDER BY DISP_ORDER DESC, RX_PROD_DESCR ASC
END
even as simple as select @hcpID is throwing exception.
I have another stored proc.
ALTER PROCEDURE PRODSUMMARY (@HCP_ID VARCHAR(8)) AS
BEGIN
CREATE TABLE #PDSUM
          HCP_ID               CHAR(8) NOT NULL,
          RX_PRODID          CHAR(4) NOT NULL,
INSERT INTO #PDSUM (HCP_ID, RX_PRODID,...)
SELECT
                    @HCP_ID, V.PROD_ID,.....from vw_pcp v
SELECT      HCP_ID, RX_PRODID, ..... from #pdsum
END
This works in crystal 7 and 2008.
Edited by: Lavanya on Jul 31, 2008 3:22 PM

Hi
Just a few points.
1. Are you opening the existing report (Created in CR 7) in Crystal 2008?
2. If yes,I would suggest you to create a new report based on the same stored procedure.Create a new DSN for the database that you are using and the create a report based on that DSN and pointing to the mentioned Stored Procedure.
Regards
Sourashree

Quit LabVIEW function doesn't work when called from Actor Framework

This is related to a known bug. Details can be found in a discussion we had with LV R&D here: https://decibel.ni.com/content/docs/DOC-28012
I need a functional workaround to this bug because my application's top-level panel is an Actor Core.vi override. Can the AEs please help, as suggested by Aristos_Queue (LV R&D member) in the link above?

Hi David,
Were you able to try the workaround AristosQueue gave you? Below is the workaround he suggested.
Not sure, but I think that it will work just fine if you start a VI running using the Run VI method and have it invoke the Quit LabVIEW node. Not the Call By Reference node, but just wire a Static VI Reference to the Run VI method with FALSE wired to the terminal for whether to wait for it to finish. That subVI will then be running as a top-level VI on its own... and the only thing on its diagram would be the Quit LabVIEW node. I think that will work. Haven't tried it, but based on the description in the CAR, I think it will work.
Carl W.
Applications Engineering
National Instruments

Animations doesn't work when publishing from PPTX (Powerpoint 2007)

I have Presenter 7.0.2 (build 7464), running over PowerPoint
2007, and all the animations based on activators are not
controllable after publishded.
What I need is the same behave of published flash contents
as the powerpoint presentation permits:
- For example, one action button, uppon click on it,
activates some animations effects on others object elements.
Does the Adobe support (Platinum plans), or any of you that
hoppefully had already fix an way to avoid this, can help on this ?
Thanks in advance!

Hi,
Today I have found the 7.0.5 Update, build 7588, for Presenter 7, so I started to think that my long issue concerning the animations problem could be over with this update ... but it did not! :-(
After the update installation, the same presentation gives me the same wrong behavior.
It seams that the animations triggered by activators used on PowerPoint 2007 presentations continue without any support.
Is that right ?

[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

When selecting a menu item I used to click the left mouse button and hold it down, move the pointer to the desired menu item and release the mouse button. Everything works fine in the mine menu, but there's a problem when adding new adjustment layer from the layer panel: when I release the button nothing happens, I have to press the button again. In previous PS version it worked fine. How can I fix this?

I don't think that is user fixable, meaning you'll have to wait till adobe fixes it with an update.
Photoshop cc 2014
windows does not work
mac does work
Did you already post over here:
[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer

It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer.
Whenever i press "transfer purchased items from ipod", itunes sync's for about 3 seconds, but I still can't install updates on the ipod without itues warning me about purchased items on the ipod, that aren't in the itunes library. I've tried folowing the steps in itunes help, but I can only find a step guide for when you know the specific item that needs transferring, and I donøt know that specific item.

This Apple Tech Note explains the process:
http://support.apple.com/kb/ht1848
It will transfer all purchased items that the computer you are transferring to is authorised to play: you don't have to select the items.

I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones. It works when calling any other brand of cell phone. Network carrier assures me problem is not on there side. Any assistance will be appreciated.

I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones. It works when calling any other brand of cell phone. Network carrier assures me problem is not on there side. Any assistance will be appreciated.

I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones. It works when calling any other brand of cell phone. Network carrier assures me problem is not on there side. Any assistance will be appreciated.

AirPlay doesn't work when streaming from BBC iplayer unless I use mirroring

Similar Messages

Maybe you are looking for