Airport audio balance itunes 7.0.2

having problems with itunes only playing on the right channel of my remote stereo through airport. Stereo works fine otherwise and have tried two different audio cables on different stereos with the same reults. Itunes plays on left and right channels on the computer speakers. Tried rebooting the remote station with no luck
imac Mac OS X (10.4.8)

I'm having the same problem.

Similar Messages

No audio from iTunes 11 on windows 7

I get no audio on playback from newest releases of iTunes 11.1.5.5 on my Windows-7 laptop. This is whether I am trying to listen to groovera.com channels on the internet option, or direct playback of a CD inserted. In all cases iTunes appears to be playing, yet no sound comes out of the speakers or headphones. All other programs (Spotify, Pandora, etc) use the speakers ok. I have uninstalled iTunes and freshly downloaded it several times. This situation has persisted through several releases over the last few months; I do not remember with which release the problem first started. I have no idea why. I have looked at Windows Firewall settings, etc. I have a feeling the answer lies in either iTunes settings or possibly permissions within Windows, but have no clue what to look at. Help?

Hello Ozboz1,
It sounds lke you are not hearing audio in iTunes when playing a CD or listening to internet radio. I recommend first checking out this info from the article named:
iTunes 11 for Windows: If you have trouble playing music or other audio
http://support.apple.com/kb/PH12335
If the progress bar at the top of the iTunes window is moving, but you don’t hear anything
If you’re using your computer’s built-in speakers: Make sure the volume control at the top of the iTunes window isn’t turned down, and that your computer’s output volume isn’t turned down (in the “Sound and Audio Devices Properties” control panel).
If you’re using powered speakers connected to your computer: Make sure the powered speakers are properly plugged in to your computer’s audio port, plugged into a power source, and turned on. Also make sure their volume isn’t turned down.
If you’re using remote speakers and the iTunes volume control is dimmed: Make sure Computer is selected in the AirPlay pop-up menu at the top of the iTunes window. Then choose iTunes > Preferences, click Devices, and make sure “Allow iTunes audio control from remote speakers” is not selected.
If you’re trying to listen to music through remote speakers using AirPort Express: Make sure the remote speakers are selected in the AirPlay pop-up menu at the top of the iTunes window. If you only want to use the volume control on the speakers, choose iTunes > Preferences, click Devices, and select “Allow iTunes audio control from remote speakers.” Make sure the volume control on the speakers isn’t turned down.
If the issue persists, try the troubleshooting in the following article to help isolate it further:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/ts3430
If the issue still is not resolved I would next use the following article to help investigate conflicts with Windows:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Thank you for using Apple Support Communities.
Regards,
Sterling

Streaming audio into itunes?

Quick question...
Is it possible to stream audio into itunes using the headphone jack on my ibook for the purpose of playing other audio sources (not mp3s/CDs) wirelessly to airport express?
Or, is there any third-party software that has the capability of streaming audio-in through the headphone jack and then out to airport extreme?
Any help would be much appreciated!

rengic, Welcome to the discussion area!
That is not possible. The headphone jack on your iBook is audio OUT only.
To get audio into your iBook, you will need to use a USB audio input device like the iMic.

When I upload audio from itunes into my imovie project, it does not show all of the track?

Hi, I have opened a new project in imovie - I have uploaded 200 photos into the project to make a Comic Book movie!
this project is 7 mins and 8 seconds long - the exact length of the audio track that I want to play during the movie!
I have selected the music by clicking the musical note button in imovie, which open up my itunes library and displays the track I want to use that is 7 mins and 8 seconds long.
When I click and drag my MP3 audio from itunes into my imovie project, i only plays the first 5 mins & 33 seconds; leaving my project in silence for the final 1 min & 3 seconds????
I have not added markers, there are no fade ins or fade outs - only the first 5 min & 33 seconds or a 7 min & 8 seconds MP3 Audio track???
I have spent 10 hours trying to rectify this problem.......
can anyone help me with this problem
Peace, Love & Happiness
Jayondrums

Sounds like your talking about iMovie for Mac?
This is the iOS version, repost here:
iMovie

Audio balance greatly different in Encore CS3 after encoding 5.1 master track in Premiere Pro CS3

Hello! I'm wondering if anyone can offer some advice for my DVD audio problem.
I have a Premiere Pro CS3 project with a 5.1 master track that appears to behave correctly judging by the meters when I play it in PP. It also sounds reasonable (in a mixed-down fashion, I guess) on my PC system's speakers (L,R,LFE), and all rebalancing and panning seems to work well. However, once I export the master track to Encore using PP's SurCode Dolby Digital codec, the resulting audio mix is totally off. Here's what I get: both front channels play mainly out of the right front and center speakers, and the rear channels play mainly out of the left front speaker. I've tried all different settings, but I can't seem to change this. Well I've read that Encore just sends the audio mix straight through (the DVD trancode status is "Don't transcode"), but when I build the DVD and play it on both of my 5.1 surround systems, the results are just as bad as what my desktop PC speakers were hinting at. [Actually all DVDs that Encore builds are UNSUPPORTED on one of my set-top DVD players and they're both Panasonic! So first, I first have to copy the DVD using Nero and then the copy is accepted by all. That seems to have no bearing on my audio dilemma but I thought I'd mention it. I would love to know what Nero is doing right that Encore is doing wrong!)
Anyway, here's some background: I began to notice this problem with the audio balancing whenever a .wav music source is imported into PP as a stereo source. [A side issue here - I don't seem to be able to explain - or control - how one .wav file gets imported as stereo while another is imported as 5.1!] Anyway, as one would expect, since my master track is 5.1, the stereo track is automatically set up with a rebalancing tray with the puck set in the middle. The meters show that the source is stereo and the sound has been rebalanced across the master track. If I drag the puck around, the master meters behave accordingly. Then I import my video (.avi video clip) and that sound is imported as a stereo track. For that track, I drag the puck to the rear. Again, the master meters respond correctly. So far so good. But when I export to Encore, the resulting audio mix so completely wrong it can't even be explained as a 5.1-to-stereo downmix situation. The sounds that were supposed to come out of the rear channels are in front left and center (and deafening), overpowering the music that is only coming out of front right. And the rear speakers are silent unless I turn on Pro-Logic on my amplifier, which just confuses the issue. I didn't bother to check LFE as things were bad enough.
Where I DO NOT have the problem is when the audio file is imported as a 5.1 source (although it is just a stereo CD track ripped using Sony CD Architect). In that case, there is no rebalancing tray and the track meter shows only the L and R channels active, as expected. Ditto for the master track. Now if I go ahead and send the music to a stereo submix track and let that rebalance to the master, I see all channels active. But that results in the problem above after exporting to Adobe Media Encoder using SurCode and then importing the audio into Encore. If I don't remix to 5.1, the audio on the DVD is OK. But I would like to have the music come out of all speakers when there isn't a video soundtrack as there are many still pictures in the presentation.
So the question is, if I can rebalance and pan channels in PP CS3, why are the results coming out all wrong in Encore using SurCode? And how can I hear my project on DVD the same way I mixed in PP?
Any help would be greatly appreciated!
Doug Herbst
Holmdel NJ

Problem solved everyone!!!
Rebecca of Adobe support helped me identify the root cause: project was originally set up as standard (2-channel) and although it had evolved to a 5.1 project over time, it could never grow up to be anything other than a standard audio project. After you set up the new project, the setting that controls your audio is buried in the project somewhere. Changing your project settings to set up new 5.1 audio tracks for new timelines does NOT make the project 5.1! The real audio identity attribute set at birth is not alterable OR EVEN VISIBLE (even as a grayed-out project setting) although PP will allow you to set up and mix 5.1 audio tracks at will. So you may think you're working on a 5.1 project now, but you're only fooling yourself and PP goes right along with it. Even the .ac3 files you create via export are 5.1! But dare to build your DVD in Encore and all of your timelines are transcoded back to 2.0 instantly. Resistance is futile.
A new feature in PP CS4 will allow you to view, and even CHANGE, your project's audio identify from standard to 5.1. How sweet!
Well, I've devised a way to dig out myself out of this deep hole in CS3 and it worked, but I can't promise that it will work for everyone. (This assumes you own the Dolby Digital 5.1 codec from Minnetonka.)
1. Create a new Premiere Pro project as 5.1 audio from the get-go.
2. Import your suspected 2.0 project into this new 5.1 project and click each sequence to flesh out the timeline.
3. Re-export all audio as elemental streams using Adobe Media Encoder. Make sure you export the audio component of each timeline as Dolby Digital 5.1 and exactly - and I mean EXACTLY - the same way. To deviate the audio settings for each timeline is to ask for trouble, so I recommend setting up an audio pre-set that you can just click when you need it.
4. Create a new Encore project and import all original video assets and your new replaced and, hopefully, 5.1 audio assets into it.
5. In Encore, create a separate timeline for each pair of assets (.m2v and .ac3 for example). DO NOT ATTEMPT TO PLACE MULTIPLE PAIRS OF ASSETS ON THE SAME TIMELINE! For some unexplained reason, the build process will transcode the audio back to 2.0, and if you continue pack new 5.1 audio assets on the same timeline, you will get an error message "an input contract violation has occurred" because you now have 2.0 and 5.1 assets on the same timeline, even though you really don't know that and didn't ask for that to happen anyway. (Thanks to Bill Hunt who mentioned his habit of keeping the asset pairs on separate timelines in another thread - that suggestion was absolutely essential to the solution here.)
6. In Encore, check to make sure that all of your original video sychs up correctly with the new, true 5.1 audio. Link the end actions of each timeline with the next timeline to play in the correct sequence. Check your project for orphan timelines and other errors. Then, before you start building menus and start getting fancy, build a DVD and make sure it plays as 5.1 on your system.
Tip #1: while you're re-exporting and replacing the audio files, don't have Encore running. I've seen it gracefully and automatically re-import the replaced file once the export is done, but I have also seen it choke with the terribly descriptive "Encore has encountered a problem" message upon discovered the asset is not available while it is being replaced. Encore then continues to mark the asset as offline.
Tip #2: when re-exporting and replacing files, always select audio and video separately. For some reason, Encore will allow you to replace an .ac3 file when you perform an elemental audio export, but when you try to combine video and audio and both files exist, Encore will prompt you to replace the video, but immediately abort with an error that it cannot replace the .ac3 file, thus forcing you to delete the .ac3 component manually before trying again.
Doug

Can't import audio into itunes 11.2.1

I can no longer import personal audio to itunes 11.2.1. It does nothing when I try. I need the audio so I can import into an imovie I am creating. Any help with this latest version of itunes?

How did you get it solved? I can't see the answer.

After i Dowloaded a huge document of audio my itunes craches everytime i launch Itunes. Any tips?

After i Dowloaded a huge document of audio my itunes craches everytime i launch Itunes.
Need help Plz

After i Dowloaded a huge document of audio my itunes craches everytime i launch Itunes.
Need help Plz

No audio in iTunes

"Suddenly" (isn't it always?) I have no audio in iTunes (10.6.1).
Audio in other apps is fine. May be something obvious, but I'm stumped. Any ideas?

I had the same problem. I was able to get sound again by going to "sounds and audio devices" in control panel. I found a "mute" box that was checked. How it got checked is a mystery, but others have reported losing audio when updating to most recent iTunes, so I can only assume it did something wacky during the install.

No Audio in iTunes after 10.1.1 Upgrade

After upgrading to iTunes 10.1.1, I have no Audio in iTunes for Music/Podcasts.
Audio works fine in iTunes for movies/tv shows but not music/podcasts. I validated the audio works in all other programs, Quicktime, etc.
Tried reinstalling several times, same behavior - Any thoughts?
Running Mac OS X 10.6.5

If it play video but not audio, normally is an audio codec trouble. Movies may using other codecs than your musics. Strang this happening when upgrading... You may try play the music with QuickTime, if still got no audio, than is the codec.

I am not able to download mp4 files (video and audio) to iTunes since I updated to iTunes 11. Thanks for your help.

I am not able to download mp4 files (video and audio) to iTunes since I updated to iTunes 11. Thanks for your help.

Thank you for clarifying. Your question is in your browser, not in iTunes. Each download link is different, and it has nothing to do with the File menu. You can save media files by secondary-clicking on the link to the media file and selecting Save File to "[your downloads folder".

Distorted audio in iTunes and other apps after 10.8.4 ?

Hi
Listen. After i installed the latest 10.8.4 i have distorted audio in iTunes and other music applications.
I have tested this on 3 mac's all with the same result. distorted audio when playing loud
Anyone else got this new problem after installing 10.8.4 ?
I already filled in a bug report to Apple at https://bugreport.apple.com
We need to get this fixed NOW... Please write your situation if you discovered the same bug.
Thanks.
Have fun.
Erik

Ask on the Microsoft forums, as it's their software you're having problems with:
http://answers.microsoft.com/en-us/mac

Audio Balance issue in Windows XP Pro SP3 using Boot Camp

Hi,
It seems that my Windows audio isn't balanced after launching with Boot Camp. The right speaker is fine, but the left speaker sounds soft and faint. I discovered this when playing with the audio balance in volume control. I'm not facing the same issue in Max OS X.
I have already downloaded the latest Realtek audio drivers and still no luck. Has anyone encountered this, and know of a solution? I use both OSes extensively and playing music is a must..
Thanks!

First you said: "I spend 15 minutes changing the product key, calling up 1-888-571-2048 and entering the long string
of numbers, then entering the conformation code and then it is finally activated."
Then you said: "guess that was a big fat lie."
These are in direct opposition. You were able to activate your install. They never said that they would keep the serves running, just that you would be able to activate, and you have.
Please do not read this sentence. Please ignore the previous sentence.
A big fat +1, sir!

Loss of audio in iTunes

I started having problems with my computer's ability to playback audio in iTunes or anything related to Quicktime as soon as I installed Quicktime 7.4 and iTunes 7.6.
Current symptoms:
Scratchy or glitchy audio
No sound at all in Quicktime player
Intermittant play in iTunes (songs sometimes stall at 0:00, file format does not seem to matter nor does particular song)
Sound will drop out entirely. Then, if I plug in some headphones, the sound will return. Upon unplugging the headphones, the sound will come from the speakers but eventually become scratchy and disappear once more.
Now that I've written all that out, I'm wondering if it's even a software issue. Soundcard maybe?

I had the same issues and someone posted this in my topic
"I would try rotating through different USB ports first. If that fails, try an Open Firmware reset - that'll clear all the info for the USB and FireWire ports.
To reset Open Firmware, reboot and press and hold the Command-Option-O-F keys until the Open Firmware screen appears. At the command line prompt, type in the following exactly, pressing Return after each line:
reset-nvram
reset-all
reboot"
I switched the usb port around and it seemed to work for me. well at least for the last 15 minutes. hopefully this works for you

Wired AirPort Express not showing in AirPort Utility or iTunes

So I was using my two AirPort Express's to wirelessly play iTunes throughout the house. Recently I wired the house with Cat6 and decided to wire in the AXs for more reliability. My AXs are 1st gen and are running 7.6.1. The problem is, when I turned the wireless off on them, they no longer show up in AirPort Utility or iTunes. I can get them to show in utility by selecting "Configure Other" then manually entering their IP address and password, but that's the only way and they never show in iTunes and disappear from Utility once I "Update". They are wired to a Gigabit switch which is wired to a Netgear router.
Some additional Info:
Green light is on and solid
I can ping them and connect manually
"Connect using ethernet" is set
Connection sharing "Off (Bridge Mode)" is set
I also want to extend my wireless range with them, so I've mirrored my wireless settings and used "Create a wireless network" (tried without doing this as well without luck)
Enable AirPlay is checked
Netgear WNDR3700v2 Router Firmware version 1.0.0.36
Keebox SGE08 Gigabit Ethernet Switch
Windows 7 Home Premium SP1 x64
Any idea why I can't see or use them in iTunes and AirPort Utility?
Thanks!
-Jake

I wish that I could help you. I'm having a similar problem, but wireless.
A couple months ago, my two Airport Expresses and my Apple TV disappeared from iTunes AirPlay. When I ran the Airport Utility, the Airports and Apple TV could not be located. Interestingly, the Airports displayed a green light and all iDevices (iPod Touches and iPads) could connect to the Airports via AirPlay. Like wise, Airport Utility on the iDevices located the Airports. So I connected an Airport to the router via a Ethernet cable. Once connected via wire and after a hard reset (with an orange light displayed) the Airport Utility found the wire-connected Airport. I ran the utility to set up the Airport and a green light came on. Then the wire-connected Airport was visible on iTunes AirPlay. So I unplugged the Airplay and returned it to the stereo. The green light came on, but now neither iTunes not the computer based Airport Utility could find it, even though the iDevices could. I repeated this process expecting a different outcome enough times to be certified insane.
So as I sit my computer based (Windows Vista) Airport Utility and computer based iTunes (the new version) cannot locate the Airport Expresses even though the iDevices readily see them. And their green lights display a connection to the network.
I even tried a forced connection by pasting the Airport's IP address (obtained using Airport Utility on iPad) into the manual configuration of the Airport Utility on the computer. Oddly, once the IP address was entered, the computer based Airport Utility could see the specs of the Airport Express. But when I tried to save or conclude the Computer based Airport Utility configuration, I got an error.
Another odd thing is that the Remote App on my iDevices no longer works either. I can no longer connect to my iTunes library. The remote simply can't find my Library at all. (I confirmed that Home Sharing is on). But I noted that in iTunes is indicated that four devices work connected or linked to the Library. So I had iTunes "forget" the devices "connected" for Remote and tried to reconnect. I got the number could on the iDevise but the devise never appeared in iTunes Devises for selection.
So whatever problem is preventing iTunes from locating my Airport, is also blocking my iDevises from connecting to iTunes. Meanwhile, my iDevises can sync with iTunes (while wired - I never tried a wireless sync) and can connect via AirPlay to all Airports.
I've researched this for months and found nothing to work. I'm frustrated to the point of doing something drastic like dumping iTunes and finding some other player to manage my music and stream to my stereos. I'd rather not but the vast majority of my Library can't be played over my stereo.

I've imported a giant cd collection for my work in wav format for the best quality audio using iTunes version 11.1.1. I need to transfer this library to our Music workstation using iTunes 11.0.1. That workstation version of iTunes can't be upgraded for

I've imported a giant cd collection for my boss in wav format for the best quality audio using iTunes version 11.1.1. I need to transfer this library to our Music workstation using iTunes 11.0.1. That workstation version of iTunes can't be upgraded for compatability reasons with other software using iTunes. When I try to transfer the library I lose all of the CD metadata and end up with only track names. Is there a way to transfer everything along with the metadata?

Not easily. WAV format does not store tag information in the file. Realize both AIFF (equivalent to WAV) and Apple Lossless (full quality but smaller files) do, so WAV was unfortunately the worst format to chose.
If you have to go with what you have you will have to explore exporting the library as .xml, moving it and the files to the other computer, then rebuilding a lower version library with the two sets. I am not sure if you can do it with the library.xml file that already exists or if it too differs according to version. You may end up having to export the files as a playlist. You will, of course, lose artwork too, though you can try fetching it from the iTunes Store later.
Some of what you need to do is outlined in these articles though you have the added limitation that you are not building a library of the same version. (It really is a piity you choose WAV, otherwise you could have simply added the ripped files and most of the data would have traveled with them.)
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451

Airport audio balance itunes 7.0.2

Similar Messages

Maybe you are looking for