Airport Extreme Connected to Internet but Macbook Pro will not

I'm living in an apartment and using an Airport Extreme to supply wireless connection. The internet is paid for by the apartment complex and I have no access to the modem. Up until yesterday the internet worked fine for all devices. I did several factory resets on the Airport Extreme and now have confirmed internet access with my PS3 and smartphone connected to the wireless network. However, my macbook pro will connect to the wireless network but will not go beyond that to the web. I have renewed DHCP leases, reset network configurations and deleted plists to refresh everything but it still does not work. I have noted that when connected to the network, I have an IP address that begins with 192.168.x.x and the macbook states the router address begins the same way. The Airport Extreme displays an IP address of 172.xxx.x.x
I can manually input the routers IP address into my laptops network configuration and create an IP similar and connect to the internet through the laptop but if I want to connect to other networks I have reset that information. It simply won't work automatically. The airport extreme is setup in bridge mode. That is the only setup which would offer stable networking without any dropping or the device disappearing from the airport utility.
I'm currently out of my apartment and will call my ISP later today, but this problem has affected my roommates macbook's as well. My last attempt to connect directly into the wall ethernet jack yielded the same results without any internet connection.

Try this:
Put the Airport Extreme in Bridge Mode and plug the apartment ethernet cable into a normal ethernet port on the back of the Airport Extreme instead of the normal "Internet" ethernet port.

Similar Messages

  • Sleep light is on but MacBook pro will not power up

    Sleep light is on but MacBook pro will not power up

    Hi a,
    If the sleep light is already on when you try to start up, that means the MBP isn't shut down, so cannot start up. Hold down the power button for 5-10 seconds to shut it down, then try starting up.

  • When buying on line my macbook pro will not let me go to the payment page of the web site

    When purchasing goods over the internet my MacBook Pro will not allow me to go beyond the payment page therefore I am unable to complete my purchase. If I use a Windows operated PC in the same household I do not have this problem.
    Are there any security settings on my MacBook preventing me going any further?
    Les

    Your MBP will let you do everything. What you haven't told us is what browser, what prompt comes up when you select pay, and does this happen on every web site you buy stuff on.

  • Can't connect to internet via MacBook Pro to Airport Extreme

    I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

    Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

  • My MacBook Pro will not open any application or program that requires internet, even though I am connected to the web.

    My MacBook Pro will not open any app or program that requires Internet, even though I am connected to the web. I recently installed Norton AntiVirus and think it may have changed a setting that I couldn't find. I uninstalled Norton and it didn't help. Every time I open Safari, iTunes or any other program that tries to connect to the Internet, it crashes. Strangely enough, Skype still works, but nothing else.
    I have OSx 10.6.8.
    I have tried erasing plists, and all the standard troubleshooting, ie resetting modem, restarting computer, reloading Safari from disk.
    Any help would be greatly appreciated. Thank you in advance.

    Change your router channel.  Sometimes this is all you will have to do.
    Power cycling the router.  Read the router's user manual or contact their tech support for instructions.
    System Preferences/Internet & Network/Network
    Unlock the padlock
    Locations:  Automatic
    Highlight Airport
    Click the Assist Me button
    In the popup window click the Diagnostic button.
    System Preferences/Network- Unlock padlock.  Highlight Airport.  Network Name-select your name.  Click on the Advanced button.  Airport/Preferred Networks-delete all that is not your network.
    Place a check mark next to "Remember networks this computer has joined."  Click the OK button and lock the padlock.  Restart your computer.
    http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
    No internet connection (wireless)
    Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
    Delete all extra entries that you find.
    Place a check mark next to "Remember networks this computer has joined."
    Other resources to check into:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    Netspot
    How to diagnose and resolve Wi-Fi slow-downs
    Pv6 troubleshooting
    Mac OS X 10.6 Help:  Solving problems with connecting to the Internet
    What Affects Wireless Internet?
    Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    I uninstalled Norton and it didn't help.
    To properly uninstall Norton software follow these instructions - Locate Symantic Solutions folder inside the Applications folder at the root level of your HD, launch the Symantec Uninstaller application, select the Symantec AntiVirus Corporate, Norton AntiVirus & Norton AntiVirus Auto-Protect entries and click the Uninstall button. 
    Confirm your decision when prompted and then enter your administrator password in the space provided.
    Retart your computer & Norton should be gone for good.
    If the above does not work, download a copy of Symantec’s RemoveSymantecMacFiles removal utility.  This utility will launch Terminal & remove the Norton components.

  • My MacBook pro will not connect to the Internet through wifi yet all other devices do

    My MacBook pro will not connect to the Internet through wifi. I have several other wifi enabled devices and they are all connected to the Internet just fine... What could/would cause this?

    Disable your AirPort and enable in a second. Or check, maybe you need to type in correct digits in; Settings/Network/Advanced/Configure...

  • MacBook Pro will not connect to the internet

    Suddenly, my MacBook Pro will not connect to the Internet--even when I take the cable from the Time Capsule and plug it into the laptop...
    -Internet is good
    –WiFi is connected
    -both work with my iPad...

    You should show WiFi:
    Do you have it turned on?
    Clinton

  • My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    try this.
    get back into your router's settings and start deleting devices that are not connected to your router.
    you can also delete the ones that are connected - they'll connect again.
    on the DHCP side of it, increase the amount of users that can connect/log in to your router.
    see if that sorts it out for you.
    good luck.

  • My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees'it

    My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees' it

    Hi there tomcrud,
    You may find the information in the article below helpful.
    OS X Mavericks: Set up Bluetooth audio devices
    http://support.apple.com/kb/PH14217
    Also, make sure your iPhone is not paired to the speaker while trying to piar it to your Mac.
    -Griff W. 

  • My MacBook Pro will not powerup (even when connected to power supply).

    My MacBook Pro will not powerup (even when connected to power supply). The caps lock key is the only light on.

    Hi PatB11902,
    Thank you for visiting Apple Support Communities.
    If your MacBook Pro does not seem to power on, but the caps lock key will light up when you press the caps lock key, you are likely seeing a video issue.
    There are several steps that can help troubleshoot this behavior, found at this link:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Start with these steps:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Start up in Safe Mode.
    If your Mac does not start up normally after these steps, here are some additional tips that can help:
    Troubleshooting: My computer won't turn on - Apple Support
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Sincerely,
    Jeremy

  • My macbook pro will not connect automatically to wifi after restarting or asleep

    My Macbook Pro will not automatically connect to wi fi after restarting or sleeping. Any ideas?

    Few have this problem. But there is no single sure solution for this.
    Until a solution is found, manually connecting to wifi after sleep is the way.
    Best.

  • Have Macbook Pro & 4th gen iPod Touch. Downloaded & installed iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says "iTunes" Data too new to be used with this version of iTunes.

    Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1.  I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??

    Is your computer still authorized in the Store menu in iTunes?
    iTunes Store: About authorization and deauthorization
    When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
    Did you try to deselect Wi-Fi syncing and enable it again after that?
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    Did you already transfer your purchases and manually started a backup?

  • The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?

    I have recently switched from a PC to a MacBook Pro.
    I have a large number of documents and photographs on a multiterrabite external drive, backed up on a second multiterrabite external drive.
    Both external drives are formatted for MacIntosh. This has been verified by agents at an Apple store and also at Best Buy in two different cities.
    This is the problem:
    The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
    Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
    I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
    Thanks!
    Roderick Guerry
    [email protected]

    Roderick Guerry wrote:
    The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
    No, this is a philosophical difference between Apple and Microsoft. Apple believes that it's dangerous to cut a file in case the user never pastes it; in that case the file is lost. Microsoft seems to not have this problem (if I remember Windows correctly) because they don't delete the originating file if it's cut but never pasted.
    Even though Macs have a lot of keyboard shortcuts, philosophically Macs have traditionally been mouse-first. This applies to file copy operations. In your case, what a Mac user would do is open the source window, open the destination window (on your second drive), and then Command-drag the selected files from the source to destination window. This is because a normal drag would leave the originals behind, while adding the Command modifier key tells OS X that this is a Move, not a Copy, so don't leave the originals behind.
    (In addition there are different rules for drag-copying within the same volume or between different volumes. If you drag between two folders on the same volume, the files are moved. If you drag between different volumes, the files are copied unless you hold down Command to delete the copies on the source volume.)
    Roderick Guerry wrote:
    Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
    Two problems in this case. First, batch file renaming is not built into OS X unless you build something with Automator. However, there are many utilities that can do batch file renaming which you can find at macupdate.com or on the App Store. Since I work with media I often batch rename using one of the media managers I have lying around like Media Pro or Adobe Bridge (comes with Photoshop).
    iPhoto is a database front end designed to shield the file system from the consumer and let them concentrate on creativity and sharing. As such it is often a poor choice for managing files directly. When you "transferred the photographs" chances are you moved the originals, not the ones iPhoto edited which are stored in a hidden folder.
    Roderick Guerry wrote:
    I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
    There will not be a way to do it exactly like Windows. As described above, there are ways to do it "the Mac way." If it is possible to remove judgment on which way is "better" you might find the Mac way to be acceptable, but of course sometimes we simply prefer what we're used to.

  • MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

    Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

    Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
    Run the Startup Manager to select Startup disk:  http://support.apple.com/kb/HT1310
    If those did not work your disk may be sick or dying.  The top priority at this point is to make a backup copy of your data.
    Check the health of the disk.  Boot in Recovery Mode (Boot, Command-R).  Run Disk Utility.  Click on the upper left disk icon.  Does the S.M.A.R.T. status say “Verified”?  If not the disk/SSD is unhealthy and needs to be replaced.  Even if it does not show “Verified” you can still attempt a backup. 
    Click on the icon indented below, usually called “Macintosh HD” and Verify Disk.  If it finishes with a green “OK” message then all is well with the disk.  If it shows errors in red then you have found a problem to address once the system is backed up.  Do not attempt software repairs until you have secured the data.
    If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable.  A trip to an Apple store for confirmation would be in order.
    If you have an external disk drive you can use as a backup drive then do so.  If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one.  Any 1 TB external drive will do.
    Assuming it is still breathing you can try to recover the data without booting from the sick disk. 
    Reformat the external disk.  (This will erase all data on the external disk.)
    Boot in Recovery Mode.  Start Disk Utility.  Plug in the new disk.  Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
    Partition Layout > Single Partition
    Name: Emergency Recovery 1 (or whatever name you wish to use)
    Format: Mac OS Extended (journaled)
    Options… > GUID Partition Table > OK
    Apply
    Select the Restore tab.
    Drag the old system volume (Macintosh HD) to Source.
    Drag the new disk volume (Emergency Recovery 1) to Destination.
    Click on Restore.
    It may take a long time for the backup.
    If that will not complete post back for other emergency data recovery methods, including those from a brody.
    If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk.  If it does not finish with a green OK message try to repair it once or twice more.  If it repairs with a green OK message, will it boot normally?  If not, boot from the Recovery Partition and reinstall OS X.
    If it is still not healthy, post back for further instructions.

  • My Macbook Pro will not play a Disney DVD (Howl's Moving Castle). It says supported disc not available but it plays on my cousin's Macbook Pro.

    Basically my macbook pro will not play this one DVD. It is a dvd that is fresh out of the package that I order from amazon and it is the second dvd that I have tried. Amazon sent me a new dvd when there were problems but both are not working but my laptop will play all other dvds, including the bonus dvd that came with the dvd i am trying to watch. I tried playing the dvd in my cousin's macbook pro and it worked. I already repaired discs permissions and restarted my computer but i cannot get this dvd to play for the life of me. When I put it in the disc drive the laptop buzzes for a few seconds then spits it out. When I open dvd player before hand and hit play it gives the message "supported disc is not available"

    The laptop is about 2 years old, and I watch a lot of movies on it. I would think I had set the region but I could be wrong. I'm in North America wouldn't that be the preset? Also, how would you go about changing or double checking that. Also if a movie was from a collaboration of disney and studio ghibli (japanese studio) would that mean I have to change the region just for that one movie? It would be weird if it were that way because I have another movie by disney and studio ghibli, and it plays, for that matter so does the bonus feature disc that came with this movie....

Maybe you are looking for

  • How can i get a list with all devices that have the same icloud account for iMessage, FaceTime, Reminders, etc...

    Hi, I want to know which devices (iMac, MacBook, iPod, iPhone, iPad & PC) are using my iCloud account, specifically because of iMessage going to devices that im not aware of. A list of those devices would be great. I do have a list of the ones with f

  • Data upload for records management

    Hi experts, We're facing a problem while creating an RFC-enabled function to upload documents to the 'digital personnel file', which is the HR extension on records management. The goal is to transfer a document to SAP via RFC and upload it then from

  • A doubt regarding the usage of Reflection

    There are several classes A, B, C, D,.... in a package. A, B, C & D are generic names given to the java files inside the package. They actually indicate files selected by the user during run-time. A a = new A(); B b = a.getB(); C c = b.getC(); D d =

  • Disable the 'CHANGE' button in CRMD_ORDER

    Hi Experts, I have a requirement, where I need to disable the change button in CRMD_ORDER transaction for only few orders... am not sure about the disabling the change button, so I tried to disable the fields for input. I tried to use the function mo

  • Required information regarding Advanced Pricing.

    Hi All, I have a requirement like there is a price list with currency USD. If the Sales Order is entered in CAD currency the price for the item in the price list need to be converted into CAD currency. I am maintaining only one Price List in Currency