Airport Extreme setup for a dummy - Hey could somebody take me through the setup as Im a crazy apple fan but not a geek.

I was very excited when I purchased an Airport extreme on the 2nd feb 2012. Tried it out and ended up screwing my existing wifi router as well. Had to reset my Huawei Home Gateway again and for the time being rest the Airport extreme back into its box. Appreciate if someone could take me step by step in connecting the extreme again!

1.What if I dont want to use Airport Extreme Base station as a Bridge - can I connect it directly to the cable from the jack on the wall ? thats from where I get the internet connection.
If the jack on the wall is directly connected back to your Huwaei gateway, then you will want to leave the AEBSn in bridge mode so that the Huwaei will provide both NAT & DHCP services for network clients connected to either router. However, you could reconfigure the AEBSn back to a router and, in this case, you will create a new subnet to the Huwaei's network. Network clients on each network subnet will not be able to "see" each other, but all will still be able to access the Internet.
2. Currently the cable from the Jack goes through a splitter , which is also a modem , and two cables emerge one for the telephone and the other for the internet , which is connected to the Huwaei Home Gateway aand bridged to the Airport Extreme.
3. Can I remove all these and connect the Airport extreme directly to the jack?
I know you would be thinking that instead asking just try it out, but then again ....
Is your Internet service, ADSL, DSL, or cable? Regardless, the AEBSn does not have a built-in modem and one will still be required between the jack and the AEBSn.
4. Cable: I realised that during Bridging I had to use a CAT.5 cable, if I used the standard cables( those thin ones that come as a standard from the internet provider)  Airport extreme doesnt recognise the connection.
CAT-5 is a type of Ethernet cable. The AEBSn must be connected to an Internet modem or another router upstream of it using Ethernet.

Similar Messages

  • I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device

    I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device. If so would I have to format it with two partitions , one for time machine and the other for network storage. Aprreciate any advice

    If you have the hard drive connected to the AirPort Extreme....it is a network storage device.
    One issue that you may want to think about is that Apple does not support Time Machine backups to a hard drive at the USB port at the AirPort Extreme.
    In spite of this, some users who try this are able to make it work. Others have some limited success and some have no success.
    It's not supported....so there will be no help from Apple in the event of problems.
    If you decide to proceed with this, make sure that the partition for Time Machine backups is formatted in Mac OS Extended (Journaled) as other formats will not work with Time Machine.
    Having a secondary backup plan would also be something that you might want to consider.

  • I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired.  Is this possible and how to I get them to work together?

    I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired.  Is this possible and how to I get them to work together?
    How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
    Frank

    Thanks for the info, this really helps.
    Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
    It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
    Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on  AirPort Extreme.
    The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
    AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
    Enter a device name that you want to use for the Extreme and click Next
    Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
    You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

  • Purhasing an Airport Extreme especially for controlling WiFi in my house.

    I am thinking about purhasing an Airport Extreme especially for controlling WiFi in my house. To protect/limit internet use of my childeren.  Not just a single guest account but perphaps 2 or 3 with different time settings is this possible?  To my opinion it would be ideal to control it via the airport because there is no need for software and via an administration account I should be able to modify the settings

    Do you perhaps know of any good parenting tool / app that I can install on the Ipad mini of my childeren.
    As LaPastenague says, Apple expects you to set restrictions like this on the device itself. You will select a passcode when you establish the settings that you want. Only you will be able to change the settings that you have selected.....unless you provide the passcode to someone else.
    On the iPad....
    Tap Settings
    Tap General
    Tap Restrictions
    See Allow, Allowed Content, Privacy, etc.
    For more information about this, you need to post in the iPad support area. The link is here:
    Using iPad
    As far as allowed times, again as LaPastenague notes, Timed Access will allow you to do this for any device that connects using wireless.
    For example, you could limit the use of the iPad to the hours of 3 PM to 8 PM Weekdays and 8 AM to 11 PM on Weekends.
    Another device could be programmed to use the same "rules", or you could establish different "rules".
    At the same time, you could specify "Unlimited" access for your own personal computer, etc.

  • Download Airport Extreme Software for Windows?

    I am trying to find the windows software that comes on the CD for an Airport Extreme. (Attempting to help my Mom get her existing Airport Extreme w/ USB drive hooked up to her new windows laptop - the 802.11 connection is fine)
    Where the bloody **** is this software!? I've wasted hours on this support site looking for the basic install software. I've found the 5 year old airport admin software and lots of firmware updates. But I just want whatever comes on the CD so my mom will get the system tray icon that allows her to map the USB drive from the airport (the ability to manage the airport wouldn't hurt either).
    If you know where it is, please post a link. If apple only releases it on CD (which would be ridiculous) please put up a page that says so on your support site.

    Hello treyguinn. Welcome to the Apple Discussions!
    Here you go: AirPort Utility Setup 5.3.2 for Windows

  • Airport Express or Airport Extreme Base for home wireless

    I've read some of the comparisons between the Airport Express and Airport Extreme Base station to make an informed choice before purchasing. The Airport Express probably will suffice for my needs, plus having AirTunes is a bonus. Mobility is not such a concern (most hotels now offer wireless in any case, making the Express less appealing than when it first came out).
    But my only concern with Airport Exress is durability and quality. Some postings on the Apple site note that these can go bad after a year or so. I realize that only those having problems are posting but wondered if there might be some issues with the Express that would make the Extreme Base station a better decision, especially since it's only $30 more now.
    Thanks in advance.

    Actually it really boils down to your needs.
    Either one will work and work well, but if air tunes, and portability is important Express is the way to go. The Extreme is a very good choice as well.
    I suggest you look over both of these links and decide the features you need.
    http://www.apple.com/airportexpress/
    http://www.apple.com/airportextreme/
    Good Luck
    Don

  • I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

    I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
    They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
    Thanks!

    It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

  • I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an antennae?

    I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an additional antennae?   If so, which one because my research is confusing me about what is supposed to work with this computer.

    Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

  • Where can I buy an airport extreme card for my g5 in canada?/

    I just got a power mac g5 i have the antenna but no "airport extreme card" where can i get one ? are they hard to install?

    Try here:
    http://www.ehmac.ca/classifieds/
    Or, there is always eBay Canada, which has numerous offerings for the Airport Extreme card:
    eBay Search
    Hong Kong seems to have some of the best buys, with shipping for as little as $2.
    US sellers abound, with numerous European sellers as well.
    There's a Canadian seller who thinks that his cards are worth more than when new.......

  • Where can i buy an airport extreme card for my powerbook

    Where can I buy an airPort extreme caed for my powerbook? are they even available, if not how can I go wireless ?

    eBay is a good source, though as ever, buy wisely and make sure you get the right card for your specific model.
    Alternatively there are wireless cards available that go in the card slot. Again eBay is full of them but be sure they're OSX compatible -  its a good idea to put this phrase in your search terms.
    I can vouch that this one works as I'm using it now:
    http://cgi.ebay.co.uk/SAGEM-PCMCIA-AIRPORT-54MBPS-WIRELESS-WIFI-CARD-MAC-OS-X-/4 00124141388?pt=UK_Computing_Apple_Mac_Accessories&hash=item5d2941df4c#ht_3229wt_ 886
    It just plugged straight in and was recognised as an Airport Card. This is from the UK site but I'm sure you can find the same thing wherever you live, or at that price just have it shipped.

  • Airport Extreme card for Powerbook G4 12"

    I want to get an Airport Extreme card for my 12" Powerbook, however, am a little confused as to which one will work with it. I am currently running a 867Mhz PowerPC system. I have seen two part numbers for the Airport Extreme card, A1026 and A1027. I was hoping that someone might be able to clarify the correct one I need, thanks.

    behappysomeday, Welcome to the discussion area!
    Those cards are both the same thing. Either one will work.

  • Which Airport Extreme Card for 1.25Ghz 17"

    I am trying to purchase an Airport Extreme card for my 1.25Ghz iMac G4 17", but I seem to be finding a lot of iBook and other random Extreme cards, so I am lost which one is compatible with mine.
    I found this one that also is combined with a Bluetooth card. I would love if this is the right one or if it will even work because i hate having to use the corded mighty mouse with it.
    http://cgi.ebay.com/APPLE-AIRPORT-EXTREME-IMAC-G4-G5-A1126-BLUETOOTH-CARDW0QQitemZ330350308839QQcmdZViewItemQQptZPCC_Drives_Storage_Internal?hash=item4ce a69ade7&_trksid=p3286.c0.m14#ht_1375wt1167
    Any info would really help me out. Thanks!

    This is the profile page for your iMac at EveryMac.com
    http://www.everymac.com/systems/apple/imac/stats/imac1.25_17fp.html
    That linked product looks like this one, which is described more accurately below, and is not for an iMac G4
    http://www.megamacs.com/item/Apple-AirPort-Extreme-and-Bluetooth-Combo-Card,-Par t--A1126/view,4073062/criteria,airport%20extreme/
    This is the correct AirPort Extreme card for your iMac G4 model
    http://www.megamacs.com/item/Airport-Extreme-Card/view,3471750/criteria,airport% 20extreme/
    It does not include Bluetooth. The best way to add Bluetooth, if that is important, is with a USB Bluetooth adapter. This is the one that Apple officially approves for use with Macs that do not have built-in Bluetooth.
    http://www.amazon.com/D-Link-DBT-120-Wireless-Bluetooth-Adapter/dp/B00006B7DB
    Since that G4 iMac has USB 2.0, you may want to consider a USB wireless adapter as well, instead of the AirPort Extreme card. Here is one, sold by OWC (a Mac-oriented vendor).
    http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/
    It (probably) costs less, and it uses the faster 802.11.n standard (compared to 802.11g used by the AirPort Extreme card). You will have to install driver software, but that is provided with this adapter and it supports Panther (10.3.9) or later. And you don't have to open up the iMac to install it. If you get a different brand, make sure Mac OS X drivers are available for that product.
    The advantage of the AirPort Extreme card is that (once installed internally) nothing appears connected on the outside, and no additional driver is needed.

  • Airport Extreme Cards for Powerbook Ti

    So, why noy make an internal airport extreme card for the Ti Powerbooks? It's not like theyre that old of a model. and if other companys can make em for external use why cant Apple do this?
    Hopefully someone at Apple reads this. Ive been an avid supporter of Apple comps and its not like customers such as myself wouldnt actually buy these if they were to release them. Think about it....every titanium power book user would prolly run out and re-buy the already installed cards all over again. Makes sense to me.
    WM

    It may make sense to you, Wil, but not many people nowadays are investing in hardware enhancements for their three-and-four-year-old Tibooks. And with other manufacturers producing cards that can be installed in a Tibook and moved on to the next laptop without ever opening up the Tibook, and offering (in many cases) far better wireless range than the built-in Airport antenna can offer, Apple would face tough competition for the few customers who might be interested in such a product.

  • Frequent restart of AIRPORT EXTREME necessary for USB printing

    My AIRPORT EXTREME needs to be restarted about once every week through the AIRPORT UTILITY software in order to get the connected USB printer (Brother HL-1450) working.
    The AIRPORT is powered 24h a day and connects to the internet flawlessly but the printer dissappears from the "bonjour" printer list frequently.
    Anyone having an idea?
    (latest AIRPORT software V5.7 installed)
    powerbook   Mac OS X (10.4.7)  

    Hello jlford30. Welcome to the Apple Discussions!
    You may already have everything set up properly...
    Unfortunately, not all USB printers are compatible with AirPort base stations.
    Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
    - 802.11g AirPort Extreme Base Station (AEBS)
    - 802.11n AirPort Extreme Base Station (AEBSn)
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also, you may find the following Apple article helpful.

  • AirPort Extreme Drivers for Windows XP???

    This may be a very silly question, but I've got a new Mac Pro that will be arriving in two days and I couldn't help but wonder, "How will the AirPort Extreme WiFi card be able to connect to the Internet when I'm running Windows XP from a separate hard drive using Boot Camp?
    The Internet connection in my apartment is wireless only (coming from a router upstairs in my landlord's part of the house). Are there any AirPort Extreme drivers for Windows XP? If so, I have not been able to find anything online.
    Any suggestions on how to do this?
    Thanks,
    ~Greg

    Thanks for the info Stefan,
    However, I don't think that the Macintosh driver CD will do me any good in this case because I am not planning on running the 32 bit version of Windows XP. I will be installing XP64 tomorrow once my CD arrives in the mail.
    I've heard of quite a few people who are currently running XP64 on their Mac Pro's, but I'm also pretty sure that the driver CD created by Boot Camp will only work in Windows XP 32-bit.
    If ANYONE knows of a work around for installing macintosh drivers for my super drive and airport extreme, PLEASE let me know, because I will most certainly need to be able to use my wireless card and keyboard (especially for the CD tray)
    Thanks,
    Greg

Maybe you are looking for

  • Problem in forms 6i

    here is the code i am using to call a report from forms. the reports works fine in cleint server mode but fails in web enviornment. the errorr i am getting in web enviornment i have given below. can somebody help me to find out where the problem is l

  • How to buy an Ipad outside united states

    I have a friend who lives in the United Arab Emirates and they want to know if they will be able to use their credit card to purchase an Ipad and if they can send it to someone in the United States. Message was edited by: kygirl05

  • Cash Flow Report FSI2 with Periods

    I have developed the cash flow report by copying the standard form and report in report painter FSI4 and FSI2. Everything is working and the numbers are matching. But the selection screen and dynamic selection in standard report has just the year as

  • FDM AppPool could not be accessed

    Hi, I downloaded FDM onto my single server environment. I installed the FDM server and then begun configuring the entities. When i got to configuring the web server component, this error message popped up. "AppPool "HyperionFDMAppPool" could not be a

  • TS3147 PDFs are painfully slow to print.  All other programs print quickly to my HP LaerJet 1320. Any help?

    How can I correct a problem with PDF printing?  I have an HP LaserJet 1320 and an IMAC running OSX 10.8.2