Alert Configuration Email Recepients
hi all ;
We wre trying to send alert message through email to multiple rcepients.It works fine for one recepient but how to go about sending it to multiple recepients.
in fixed recepients i have already added multiple recepients ids for whom email id is there in SU01.
in setting configuration SMTP forwarding as XML how to give 2 email addresses(seperated by ,or
Mudit,
<i>in fixed recepients i have already added multiple recepients ids for whom email id is there in SU01.
in setting configuration SMTP forwarding as XML how to give 2 email addresses(seperated by ,or </i>
The option <b>SMTP forwarding as XML is used when you want to send the Alert EMAIL in XML format.</b> The email ID you mention in SU01 does not matter in this case. All you have to do this , give the EMAIL id in SMTP FORWARDING AS XML.Have not tried for multiple email id's but try using a semi colon it should work.
If you want the <b>EMAIL ALert to be sent as a TEXT mail,</b> then in <b>ALRTCATDEF--> CONFIGURATION --> Let INTERNAL PROCESSING </b> be selected.
Next, <b>in SU01 , assign EMAIL id to your Recipients.</b>
Log on to the <b>Alert Inbox of the User , PERSONALIZATION --> TIME INDEPENDENT DELIVERY --> EMAIL.</b>
This will send the ALert as TEXT EMAIL for every recipient of the Alert. I have tried this and can assue you it works.
Regards,
Bhavesh
Similar Messages
-
Configure Email Alerts in SCOM
Hi
I have configured Email notifications, Subscribers and Subscriptions using SCOM console. Now I just want to receive only those alerts on email-id which keeps open for atleast 24hrs.
E.g.-
Alert- A Domain Controller has failed the AD Op Master Response test Resolution state: New
Frequency- If open for Over 24 hours, then alert should be generated.
Any help would be really appreciated.
Thanks in advance.
Abhinav | MCTS-Server VirtualizationYou can configure delay in channel wizard, step (Channels) add the command channel we created in step 1 and specify the desired delay (1440 minutes in this case). As shown below:
Click “Next”, in the summary step make sure “Enable this notification subscription” is checked and click “Finish”.
You should now have an subscription ready for new SCOM alerts.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical -
How to configure email Alerts in OEM Cloud 12c for Database Servers up/down
Hi everybody,
How to configure email Alerts in OEM Cloud 12c for Database Servers up/down status?
Regards,
Miguel VegaHi Miguel Vega,
Information regarding the notifications:
==============================
Configuring notification rules in 12c is different from earlier releases.
The concept and function of notification rules has been replaced with a two-tier system consisting of Incident Rules and Incident Rule Sets :
1. Incident Rules: Operate at the lowest level granularity (on discrete events) and performs the same role as notification rules from earlier releases.
By using incident rules, you can automate the response to incoming incidents and their updates.
A rule contains a set of automated actions to be taken on specific events, incidents or problems.
The actions taken are for example : sending e-mails, creating incidents, updating incidents, and creating tickets.
2. Incident Rule Set: A rule set is a collection of rules that applies to a common set of objects, for example, targets, jobs, and templates.
To help you to achieve the Notification Rules configuration, refer those notes :
How To Configure Notification Rules in 12C Enterprise Manager Cloud Control ? Doc ID 1368036.1
EM12c How to Add and Configure Email Addresses to EM Administrators and Update the Notification Schedule ?Doc ID 1368262.1
EM12c How to Subscribe or Unsubscribe for Email Notification for an Incident Rule Set ?Doc ID 1389460.1
EM 12c How to Configure Notifications for Job Executions ? Doc ID 1386816.1
Best Regards,
Venkat -
Regarding Email Alerts configuration
Hi Experts,
I have done the normal alerts configuration, its working fine. Then how to configure the Email Alerts, here I have to use the distributed email list not a single mail address, so how to do the configuration.
After normal alerts configuration we click on fixed receipients and gave user id and in the SU01 transaction we have to give the mail id for the mentioned user id, is it same for the distributed mail (one mail list, internally this list contains many mail IDs) also or any other method is there?
Thnaks & Regards
RameshHi Rajesh,
Yes I have configured the mail server details. I am able to receive the normal mails also, but my question is how to configure the distributed mail?
Regards
Ramesh -
Configuring email alerts in Ops Center
Hi all,
I have been struggling quite a while to get email alerts working from Ops Center with no success in 11g nor 12c. In the Ops Center GUI, Administration -> EC -> Local Users -> configured user to receive all alerts and emails. I have also configured email relay host correctly(checked a million times).
Sending emails from the host through the email relay works fine, so I'm baffled.
#mailx -s " Test from Ops Center" "my.email@work" < text-file
Do I need to configure something else in Ops Center or what am I missing here?The email alerts from Ops Center are working for me, I performed...
1.) You must be able to send email from the command line on the Enterprise Controller to the intended email address, ie;
# mailx -v [email protected]
Subject: Email test from Enterprise Controller
EOT
<control-d>
That test must be successful, and the email received!
2.) Setup the Notification Profile in the BUI...
Administration > Enterprise Controller > Users
Highlight the root user, select Configure Notification Profile (the wrench icon)
Notifications via >> Subscribe to All Notifications
User Interface > "Problem updates and all Severities"
Email: > "Problem updates and all Severities"
Pager: None
Notifications Delivery Details
Email: [email protected]
Pager Address: <blank>
Mail Host: localhost
Port: <blank>
Mail User: root
Mail Password: <enter the password for root on the EC>
Connection Security: STARTTLS
Select: Update Notification Profile
3.) Go to Assets > Operating System (second level down) of some Asset
In the center pane select the "Monitoring" tab
Under "Threshold Monitoring Rules" highlight "Memory Usage Percentage"
Edit Alert Monitoring Rule Parameters (the pencil)
Monitor for alert limits continuously
Toggle: Generate Alert after 1 Minute
Change Critical MemoryUsage.usedMemoryPercentage > 2%
Change Warning MemoryUsage.usedMemoryPercentage > 1%
Apply
Wait one minute, you should receive an email that resembles the following:
Notification is generated by (90037): myserver
ORACLE Enterprise Manager 11g Ops Center Reported Problem
GlobalZone: myserver
Problem ID: 425Detection Date: 02/24/2011 05:23:36 GMTSeverity:CriticalState:UnassignedOwner:-Assigned Date: -Problem Description:Memory Usage Percentage has reached 59.4122 on myserverOps Center Server: myserverProblem Link: Click on to be redirected to the reported problem
https://myserverx:9443/emoc/?objectName=com.xxx.hss.domain%3Aname%3DNORM-myserver-XVM_SATELLITE%2Ctype%3DOperatingSystem&treeId=asset-tree&handler=alarms&alarmId=425Suggested Actions NumberSynopsisAssociated Operational Plan-None -
Configure Email through OEM when there is a error in alert log file
Hi,
I am using 10.2.0.4 on O/S RHEL5.0
I want to configure email facility through OEM so that whenever there is a error in alert log file i should receive an email.
Thanks and Regards
Amithhttp://www.dba-oracle.com/oracle10g_tuning/t_oem_tuning.htm
Please read above link.
Regards
Girish Sharma -
Configure email alerts on SMD7.0
I have attended the trainng "Guided Procedure for SMD". It mentioned confguring email alerts on SMD
but did not give any detail.
I have looked into SM7.1 document which gives details about email alerts configuration.
However we have no SM7.1 yet.
Could some experts help gives some blogs or links for SM7.0 here?
Thanks!Hello,
The e-mail alerts can be configured using BC-CCM-MON infra-structure (RZ20) and the SV-SMG-MON-BPM to monitor business processes. The BC-CCM-MON supports Java monitoring, but not all of it.
Alternatively, you can purchase the full version of Wily EM and configure e-mail alerts on it.
Best regards,
Guilherme -
Need to configure email alerts for app/web server shutdown
Hi,
I need to configure email alert notification, so that whenever application server or webserver is shutdown/restarted, an email is sent to the group/userid.
I am aware that in Peoplesoft, there is no parameter or functionality which sends an email notification whenever application server & web server restart & shutdown. This is where I need help.
Did anyone setup the email alert notification in any of your environments? If so, please let me know how did you do the setup?
Thanks,
SakkyPlease find the below sample batch program.
this helps to start the appserver automatically and if the status fails this will send email automatically.
This is the another way of findting the status of the app server.
In the below program, by finding the "Done" value on the output screen we can decide if the server is running or not.
Hope you understand this, Kindly let me know if you need further information.
===============================
@echo off
REM Set a temporary variable
SET CONNECT
REM Check the status of the Application server
psadmin -c sstatus -d PSEPM | FIND "Done" > NUL
REM If the server is down boot the server
ERRORLEVEL 1 SET CONNECT= psadmin -c boot -d PSEPM
%CONNECT%
REM Check the server again for status
psadmin -c sstatus -d PSEPM | FIND "Done" > NUL
IF ERRORLEVEL 1 goto sendmail
goto end
REM Sending mail to Administrator
:sendmail
REM setting the path for email command
SET CONNECT= cd D:\PT849\bin\client\winx86
%CONNECT%
REM Below command will send mail to the Administrator
SET CONNECT= psemail -server < server ip> -from [email protected] -to [email protected] -subject "Server Down" -body "Hi, Server is down at this time, unable to boot."
%CONNECT%
:end
==============================
Edited by: Soundappan on Feb 19, 2011 10:39 AM
Edited by: Soundappan on Feb 19, 2011 10:40 AM -
Alerts to email when Bex Broadcaster Failed
Hi Experts,
Currently we are broadcasting Business KPI reports to the users from SAP BI at a scheduled time.
These broadcast settings are based on webtemplate. Some times the broadcast setting which is scheduled will fail due to the most frequest errors like " Error while generating HTML" etc.
The issue is only temporary basis, next time the same error will not come and the issue is not reproducable.So is there a way we can configure the alerts to emails when the bex broadcast setting is failed.
Transaction to see logs of broadcast settings is RSRD_LOG.
Thanks & best regards,
Sudhakar.k3 possible solutions that come to mind:
1. Write custom ABAP program that checks RSR_PREC_SETT table and sends email when report failed entry is made, and schedule program to run periodically
2. Create process chain that kick off Broadcaster report and would also notify if report has failed.
3. You can also schedule RSR_PREC_SETTINGS_RESTART with Current date variant to run periodically and this job will restart any failed broadcaster reports from that day (stored in table RSR_PREC_SETT)
Check out this article for additional information:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30e3d697-4ca0-2c10-4b81-c474b1490064?quicklink=index&overridelayout=true
Hope it helps. Thank you. -
Alert Configuration in PI 7.1
Hi,
I have done Alert Configuration as per Michal's blog 2328.
Though I am getting notified in RWB alert inbox,email is not getting triggered.
Thanks in advance,
Geethahi,
if you want to receive mails from alerts you need to configure sapconnect
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
this is not shown in my blog but needs to be done if you want mails, sms etc.
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ -
How to trigger a mail through ALERT CONFIGURATION??
Hi Folks,
I want to know how to trigger a mail through Alert Configuration?
I've read Help.SAP.com, but i am not clear where exactly the sender Email address to be given for sending a mail??
Pls reply..
Thanks in advance..
cheers
ram.Hi,
You need to maintain the email address in SU01 for the particular user Id. Also you need to configure transaction SCOT for this.
Regards,
Jai Shankar -
PI Alert Configuration doesn't send message
Hi,
I have a proceess and i want to do some alert configuration. I created two alert categories and i set fixedrecipients to my user. one of them is for Adapter errors and the other is for mapping errors. After that I created two alert rule from Runtime workbench.I set Adapter engine | Adapter Type RFC and for the other rule I set Integration Engine | Error Category
-> Application Error Code -> MAPPING.*. I get some error with RFC Adapter and ı get email about it . but when i get MAPPING error I didn't receive any message in my inbox then i changed Integration Engine | Error Category
-> * Error Code -> * it didn't work either.
How can i fix this ?So noone has ever seen this problem?
-
Alerts when emails are not going in Solman
Hi All,
Can we generate email and sms when email is going out and not recieved back in solman system.
Alerting when email not working to solman or from solman, email and sms should be sent to a particular person.
red alert when email Is not going out of SOLMAN
red alert when email are not received bask into SOLMAN
do we need to define any autoreaction method for it?
Regards
Tripti> I am saying some time all mail goes ok and some time mails doesnot go at all.
> we have external - internet means it goes to our outlook as well as our gmail also.
> SMTP IS alredy configured.
Your mailserver is sometimes requesting authentication and sometimes not. The reason for that can't be found in the SAP system but in the mailserver since that is requesting the authentication.
"Webmail" is the application on top but that is not the system sending and receiving the mail.
The SAP system is out of scope here. I'd check the mail server logs why it is requesting authentication sometimes and sometimes not.
Markus -
Alerts configuration- getting the actual contents of the payload
Hi
We are on XI 3.0 SP18 - My understanding so far - on alert category definitions has been that - we can create container variables - pull in - system variables as a part of the contents of the alert message -
Now , if I want to grab the contents of the original payload - which triggered the alert - is it possible to configure to grab this - as a part of the alert category definition - how do we do this ? Has anybody done this before - Correct pointers , suggested solutions will be rewarded rightaway.
( Having the original payload which triggered the alert as a part of the alert message -is extremely useful - since we have a requirement to make a webservice call from the XI box when alerts are delivered- apart from receiving alerts in emails. These webservice calls need to have the critical object key ( eg customer/material ) for which the alerts have been raised and to do this we need the original payloadHi Karthik,
Assumedly Michal Blog can help you:
<a href="/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated with variables from the messages payload (XI)</a>
Regards,
Udo -
Dear All,
Anybody give me the configuration details for "Auto Alert by Email" When backup job completed.
Regards,
SenthilDear Senthil,
In order to achieve this you have to do the following configuarations
SMTP Configuaration to triger the mail - TCode SCOT
CCMS Configuaration also see the SNote - 176492 - Automatic Email if an Alert Occurs
Goto TCode RZ21
-->Click Display Overview
--> Select the Monitoring properties 'CCMS_OnAler_Email'
--> Change Mode
-->Goto Parameter Tab and enter the followong
Parameter Name Parameter Value
SENDER ABC_USER(SAP User ID should exist in 000 Client)
RECIPIENT [email protected]
RECEIPIENT-TYPEID U
--> Goto Release Tab and select Auto Reaction Method
Goto RZ20
-->Expand CCMS Monitor Template
-->Click Node Database
-->Goto Properties
-->Goto Change Mode
-->Give MethodName - Auto Reaction 'CCMS_OnAler_Email'
-->Activate the Maintenance Function.
Cheers
Rayees Palot
Maybe you are looking for
-
I cannot figure out how to change the photo size on my iPhone 5s. The first time I took a pic it asked if I wanted smalll, medium or large and listed the pixels. I chose small but am now finding that is too small. Can anyone help me set it to med
-
Oim 9.1.0.1 to active directory using ssl
Hi, I am working on OIM 9.1.0.1 and AD IS on WIN2K3 R2. I successfully installed CA certificate in AD Server as given in AD Connector Document 9.1.0.1 given below. Configuring SSL for Microsoft Active Directory To configure SSL communication between
-
Best practice for select access to users
Not sure if this is the correct forum to post, if not then let me know where should I post. From my understanding this is the best forum to ask this questions. Are you aware of any "Best Practice Document" to grant select accesses to users on databas
-
Iphone 4 from Korea Country Locked?
Is it possible that my iphone 4 from korea is country locked?? I can use KT and SK Telecom micro simcard.. but it can't accept micro sim from my country? how can i solve this problem? Please help me.
-
Getting -- You have encountered an unexpected error. Please contact the Sys
Hi Hussein, I am continuing the same Post. I am also facing the same issue. We are using R12.1.3 and 11.1.0.7 database on linux OLE 5.5. For me all objects became invalid and from alert log I am getting ORA-600 Errro. mentioned below. SQL> select cou