Alert Raising for RunTime Parameters

Hi All,
I have a requirement where in i have a class,and this class has got some servers say server a,b,c. On each of these servers i will be having some depots say p,q,r on a s,t,u on b, and x,y,z on c. There is no condition that the values on the depots should be
unique,i.e. a depot cannot repeat on the same server but it can be present on another server also. And now these depotnames x,y,z etc are also part of another class again.
There is a powershell snapin which reads the values on each of the server i.e. x,y,z etc and runs the script and writes an entry for each of the value in event viewer. Event is written in pass and fail conditions. These events are written on the server where
these servernames are present.
Event Description in the eventviewer will be like : The script has been executed for depot X on the server A.
Apart from the the description we are appending the depot X name to the source parameter.
Now i want a monitor\rule to raise an alert based on the event logged for each of the depot on the server.
For ex if any of X,Y,Z fails on server A then an alert has to be fired. So for firing the alert the combination is ServerName and Depot Name. Since they cannot be hardcoded i have to read the data from the respective classes.
Please let me know if there is a way to do this. The requirement is bit lengthy and confusing(may be i have made it more confusing than it is) please let me know if any info is needed .
Help in this regard is much Appreciated
Regards, Mahadev Sundeep Maruvada

Hi,
Based on my understanding, you want to create a event monitor for the three servers (or for the specific class), when an event get fired, then fire an alert in SCOM.
There are lots kind of type for event monitor, I would like to suggest you go through the below link for more details:
http://technet.microsoft.com/en-us/library/ff629447.aspx
If you don't want to enable the monior for all servers in the class, we create override for the monitor, just disable this monitor for the specific server.
Regards,
Yan Li
Regards, Yan Li

Similar Messages

Configure a SSRS Data Alert once for all parameters

Hi,
while BOL mention "[...] If the report is parameterized, you might need to run the report using different parameter values to ensure the data that that you are interested in appears in the report. After the report is open, you click the
New Data Alert option on the Actions menu on the report toolbar to open Data Alert Designer [...]"
is it possible, or is there a work around, to configure a data alert that lists all parameter members?
i.e. I've a report with a parameter that is "Customer" that contains more or less 1000 names. How can I create a single data alert for each Customer? --> i.e if the customer has a payment delay greater than n days?
Thanks in advance, Davide

Hi Davide,
Per my understanding that you want to create only one Data Alert for all the parameters in the lists, right?
As you know that if the report is parameterized ,only after the report is open then you can click the New Data Alert option on the Actions menu on the report toolbar to open Data Alert Designer and create the Data alert.
So by design you need to first select the parameter to filter the report and then create the “New Data Alert” . When you choose a data feed, the data from the feed displays in a table with rows and columns in the alert data pane of Data Alert Designer which
is the filtered tables data based on this parameter, that means the current version not support to set only one Data Alert for all parameters at once through the setting of the “New Data Alert” , The parameter values you chose to run the report are saved
in the alert definition and will be used when report is rerun as a step in processing the alert definition. To use different parameter values, you must create a new alert definition.
I recommend you that submit this suggestion at
https://connect.microsoft.com/SQLServer/
If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level of service provided.
More details information about the date alert for your reference：
http://msdn.microsoft.com/en-us/windows/gg492254(v=sql.100).aspx
http://msdn.microsoft.com/en-us/library/gg492251.aspx
Thank you for your understanding.
Regards
Vicky Liu

Multiple Alerts getting raised for same Error

Hi All,
I have a Management Pack Which will will trigger an Exe. The Exe takes an input and that input is being provided as a parameter from the MP. Whenever the exe raises throws an error an event in the event viewer and also we are raising an Alert.
Now suppose say there are 3 inputs for which the Exe has to run. Now the Exe failed for Input 1 and passed for the rest 2. Since we have a exe failure we are raising an event and firing an alert. But in the SCOM alerts i see 3 alerts with the Source
Name as all the three inputs, but the error message and all other stuff are remaining the same
Am I missing out on anything here?
Any Help in this regard is much appreciated
Regards, Mahadev Sundeep Maruvada

<?xml version="1.0" encoding="utf-8"?><ManagementPack ContentReadable="true" SchemaVersion="2.0" OriginalSchemaVersion="2.0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Manifest>
<Identity>
<ID>AlertTestMP</ID>
<Version>1.0.0.36</Version>
</Identity>
<Name>AlertTestMP</Name>
<References>
<Reference Alias="Windows">
<ID>Microsoft.Windows.Library</ID>
<Version>7.5.8501.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Health">
<ID>System.Health.Library</ID>
<Version>7.0.8432.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>7.5.8501.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
</Manifest>
<TypeDefinitions>
<EntityTypes>
<ClassTypes>
<ClassType ID="SDMonitoringSyntheticTest.SDDepot" Accessibility="Public" Abstract="false" Base="Windows!Microsoft.Windows.ApplicationComponent" Hosted="true" Singleton="false" Extension="false">
<Property ID="ServerDetails" Type="string" AutoIncrement="false" Key="true" CaseSensitive="false" MaxLength="256" MinLength="0" Required="false" Scale="0" />
<Property ID="SDType" Type="string" AutoIncrement="false" Key="false" CaseSensitive="false" MaxLength="256" MinLength="0" Required="false" Scale="0" />
</ClassType>
<ClassType ID="SDMonitoringSyntheticTest.SDWatcher" Accessibility="Internal" Abstract="false" Base="Windows!Microsoft.Windows.LocalApplication" Hosted="true" Singleton="false" Extension="false">
<Property ID="SDType" Type="string" AutoIncrement="false" Key="false" CaseSensitive="false" MaxLength="256" MinLength="0" Required="false" Scale="0" />
</ClassType>
</ClassTypes>
<RelationshipTypes>
<RelationshipType ID="SDMonitoringSyntheticTest.SDWatcher_To_SDDepot_Relationship" Accessibility="Internal" Abstract="false" Base="System!System.Hosting">
<Source ID="Source" MinCardinality="0" MaxCardinality="2147483647" Type="SDMonitoringSyntheticTest.SDWatcher" />
<Target ID="Target" MinCardinality="0" MaxCardinality="2147483647" Type="SDMonitoringSyntheticTest.SDDepot" />
</RelationshipType>
</RelationshipTypes>
</EntityTypes>
</TypeDefinitions>
<Monitoring>
<Discoveries>
<Discovery ID="SourceDepot.SDMonitoringSyntheticTest.SDWatcherDiscovery" Enabled="true" Target="Windows!Microsoft.Windows.Computer" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="SDMonitoringSyntheticTest.SDWatcher">
<Property TypeID="SDMonitoringSyntheticTest.SDWatcher" PropertyID="SDType" />
</DiscoveryClass>
</DiscoveryTypes>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.FilteredRegistryDiscoveryProvider">
<ComputerName>
$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$
</ComputerName>
<RegistryAttributeDefinitions>
<RegistryAttributeDefinition>
<AttributeName>AppExists</AttributeName>
<Path>Software\SDSynthetic\SDServers</Path>
<PathType>0</PathType>
<AttributeType>0</AttributeType>
</RegistryAttributeDefinition>
<RegistryAttributeDefinition>
<AttributeName>SDType</AttributeName>
<Path>Software\SDSynthetic\SDServers\SDType</Path>
<PathType>1</PathType>
<AttributeType>1</AttributeType>
</RegistryAttributeDefinition>
</RegistryAttributeDefinitions>
<Frequency>600</Frequency>
<ClassId>$MPElement[Name="SDMonitoringSyntheticTest.SDWatcher"]$</ClassId>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Name>
<Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="SDMonitoringSyntheticTest.SDWatcher"]/SDType$</Name>
<Value>$Data/Values/SDType$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value>SD Util Depot ($Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetbiosComputerName$)</Value>
</Setting>
</Settings>
</InstanceSettings>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Values/AppExists</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">true</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</DataSource>
</Discovery>
<Discovery ID="SourceDepot.SDMonitoringSyntheticTest.SDWatcher.SDDepotDiscovery" Enabled="true" Target="SDMonitoringSyntheticTest.SDWatcher" ConfirmDelivery="false" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="SDMonitoringSyntheticTest.SDDepot">
<Property TypeID="SDMonitoringSyntheticTest.SDDepot" PropertyID="ServerDetails" />
<Property TypeID="SDMonitoringSyntheticTest.SDDepot" PropertyID="SDType" />
<Property TypeID="System!System.Entity" PropertyID="DisplayName" />
</DiscoveryClass>
</DiscoveryTypes>
<DataSource ID="PS" TypeID="Windows!Microsoft.Windows.TimedPowerShell.DiscoveryProvider">
<IntervalSeconds>600</IntervalSeconds>
<SyncTime />
<ScriptName>SDSyntheticServerDiscoverDepot.ps1</ScriptName>
<ScriptBody>
param($sourceId,$managedEntityId,$computerName,$SDType)
$api = new-object -comObject 'MOM.ScriptAPI'
$Script:LOG_ERROR = 1
$Script:LOG_WARNING = 2
$Script:LOG_INFORMATION = 4
$Script:ScriptName = "SDMonitoringSyntheticTestSDDiscovery.ps1"
function Write-ErrorInfo([string] $msg)
$api.LogScriptEvent("$ScriptName",1728,$Script:LOG_ERROR,"`r$msg")
function Write-OnlyInfo([string] $msg)
$api.LogScriptEvent("$ScriptName",1727,$Script:LOG_INFORMATION,"`r$msg")
Write-OnlyInfo "in SD servers discovery"
$discoveryData = $api.CreateDiscoveryData(0, $SourceId, $ManagedEntityId)
$SDServerList=Get-ChildItem "HKLM:\SOFTWARE\SDSynthetic\SDServers" | ForEach-Object {Get-ItemProperty $_.pspath}
Foreach ($SDServer in $SDServerList)
$Name = $SDServer.PSChildName
$DisplayName = $SDServer.PSChildName
Write-OnlyInfo $computerName
$ServerDetails =$SDServer.servername+":"+$SDServer.port
$instance = $discoveryData.CreateClassInstance("$MPElement[Name='SDMonitoringSyntheticTest.SDDepot']$")
$instance.AddProperty("$MPElement[Name='Windows!Microsoft.Windows.Computer']/PrincipalName$", $computerName)
$instance.AddProperty("$MPElement[Name='SDMonitoringSyntheticTest.SDDepot']/ServerDetails$", $ServerDetails)
$instance.AddProperty("$MPElement[Name='SDMonitoringSyntheticTest.SDDepot']/SDType$", $SDType)
$instance.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", $DisplayName)
$discoveryData.AddInstance($instance)
Write-OnlyInfo "$Name $ServerDetails"
Write-OnlyInfo $discoveryData
$discoveryData
</ScriptBody>
<Parameters>
<Parameter>
<Name>sourceID</Name>
<Value>$MPElement$</Value>
</Parameter>
<Parameter>
<Name>managedEntityID</Name>
<Value>$Target/Id$</Value>
</Parameter>
<Parameter>
<Name>computerName</Name>
<Value>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Parameter>
<Parameter>
<Name>SDType</Name>
<Value>$Target/Property[Type="SDMonitoringSyntheticTest.SDWatcher"]/SDType$</Value>
</Parameter>
</Parameters>
<TimeoutSeconds>300</TimeoutSeconds>
</DataSource>
</Discovery>
</Discoveries>
<Monitors>
<UnitMonitor ID="AlertTestMP.AlertDiscTestMonitor" Accessibility="Internal" Enabled="true" Target="SDMonitoringSyntheticTest.SDDepot" ParentMonitorID="Health!System.Health.EntityState" Remotable="true" Priority="Normal" TypeID="Windows!Microsoft.Windows.2SingleEventLog2StateMonitorType" ConfirmDelivery="false">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="AlertTestMP.AlertDiscTestMonitor.AlertMessage">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>Error</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data[Default='']/Context/EventDescription$</AlertParameter1>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="SecondEventRaised" MonitorTypeStateID="SecondEventRaised" HealthState="Success" />
<OperationalState ID="FirstEventRaised" MonitorTypeStateID="FirstEventRaised" HealthState="Error" />
</OperationalStates>
<Configuration>
<FirstComputerName>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</FirstComputerName>
<FirstLogName>Application</FirstLogName>
<FirstExpression>
<And>
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery Type="String">EventDescription</XPathQuery>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>WSAETIMEDOUT</Pattern>
</RegExExpression>
</Expression>
<Expression>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">7017</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">7015</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">7013</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</Or>
</Expression>
</And>
</FirstExpression>
<SecondComputerName>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</SecondComputerName>
<SecondLogName>Application</SecondLogName>
<SecondExpression>
<And>
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery Type="String">PublisherName</XPathQuery>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>$Target/Property[Type="SDMonitoringSyntheticTest.SDDepot"]/ServerDetails$</Pattern>
</RegExExpression>
</Expression>
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery Type="String">EventDescription</XPathQuery>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>executed Successfully</Pattern>
</RegExExpression>
</Expression>
<Expression>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">7012</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">7014</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">7016</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</Or>
</Expression>
</And>
</SecondExpression>
</Configuration>
</UnitMonitor>
</Monitors>
<Overrides>
<MonitorPropertyOverride ID="OverrideForMonitorAlertTestMPAlertDiscTestMonitorForContextSDMonitoringSyntheticTestSDWatcherf3454dfab84141b68e1f7cda55c641f5" Context="SDMonitoringSyntheticTest.SDWatcher" Enforced="false" Monitor="AlertTestMP.AlertDiscTestMonitor" Property="Enabled">
<Value>true</Value>
</MonitorPropertyOverride>
</Overrides>
</Monitoring>
<Presentation>
<StringResources>
<StringResource ID="AlertTestMP.AlertDiscTestMonitor.AlertMessage" />
</StringResources>
</Presentation>
<LanguagePacks>
<LanguagePack ID="ENU" IsDefault="true">
<DisplayStrings>
<DisplayString ElementID="AlertTestMP.AlertDiscTestMonitor">
<Name>AlertDiscTestMonitor</Name>
<Description>Description for the new unit monitor.</Description>
</DisplayString>
<DisplayString ElementID="AlertTestMP.AlertDiscTestMonitor.AlertMessage">
<Name>TestAlertMonitor</Name>
<Description>Event Description: {0}</Description>
</DisplayString>
<DisplayString ElementID="AlertTestMP.AlertDiscTestMonitor" SubElementID="FirstEventRaised">
<Name>FirstEventRaised</Name>
<Description>FirstEventRaised</Description>
</DisplayString>
<DisplayString ElementID="AlertTestMP.AlertDiscTestMonitor" SubElementID="SecondEventRaised">
<Name>SecondEventRaised</Name>
<Description>SecondEventRaised</Description>
</DisplayString>
</DisplayStrings>
</LanguagePack>
</LanguagePacks>
</ManagementPack>
Hi Yan,
Attached is the MP that iam using.
SourceDepot.SDMonitoringSyntheticTest.SDWatcher.SDDepotDiscovery is the class which actually discovers the inputs. As of now there is no probe action to trigger the exe, iam doing it manually, but still i see an alert raised for all of the inputs discovered
even if only 1 input has failed.
Regards, Mahadev Sundeep Maruvada

How to find the WebUrl alert was raised for external network

I have two weburl's requestes to monitor under SCOM2007 R2
url one: https://www.asdftest.com
url two: https://www.lkjhtest.com
"url one" is configured to access the weburl from internal network and external network(internet) as well.
"url two" is not configured to access from external network(internet). only configured for for internal network.
I have configured for scom monitoring for the above two urls using the SCOM 2007 R2 web application template. After configuration i have not received any alert from the "Url Two"
Q1). I am expecting an alert for "Url two" because it is not configured for external network access.
why i was not received any alert for that.
Q2). How to find an web Url alert is raised for internal network or external network. SCOM Tool is not asked me to specify that the weburl is is from internal/external network access.
Q3). Particularly how to find the Url alert was raised for external network
please suggest me and correct me if i am wrong.
Thanks in advance.

Hi,
Please refer to your another thread:
http://social.technet.microsoft.com/Forums/en-US/10d32ff3-d1a5-4875-b1ad-bb01a5799a33/web-url-monitoring-internalexternal-network?forum=operationsmana
Regards,
Yan Li
Regards, Yan Li

Alert monitor for long running background jobs

Hello,
I have to configure an alert moniter for long running background jobs which are running more than 20000 secs using rule based. I have created a rule based MTE and assigend MTE class CCMS_GET_MTE_BY_CLASS to virtual node but i dont find a node to specify the time.
could any one guide me how can i do this.
Thanks,
Kasi

Hi *,
I think the missing bit is where to set the maximum runtime. The runtime is set in the collection method and not the MTE class.
process: rz20 --> SAP CCMS Technical Expert Monitors --> All Contexts on local application server --> background --> long-running jobs. Click on 'Jobs over Runtime Limits' then properties, click the methods tab then double click 'CCMS_LONGRUNNING_JOB_COLLECT', in the parameters tab you can then set the maximum runtime.
If you need to monitor specific jobs, follow the process (http://help.sap.com/saphelp_nw70/helpdata/en/1d/ab3207b610e3408fff44d6b1de15e6/content.htm) to create the rule based monitor, then follow this process to set the runtime.
Hope this helps.
Regards,
Riyaan.
Edited by: Riyaan Mahri on Oct 22, 2009 5:07 PM
Edited by: Riyaan Mahri on Oct 22, 2009 5:08 PM

How to set plug-in Java Runtime parameters on JRE setup command line

Hi all:
I need to install JRE and set the Java Runtime Parameters -Xmx
by command line ..
I mean I don't want enter Control panel and set this parameter manually in Java Runtime Parameters textBox..
thanx.
Best regards
w.shiha

Documentation for controlling the installation is sadly lacking in detail. This is the best I have seen for the Windows environment:
http://java.com/en/download/help/silent_install.xml
But, there are numerous other PROPERTY variables that are not discussed. Particularly annoying is the addition of yet another JavaUpdate item with the release of 1.5.0_05. If you can get more information, please post a link to it here.

Error in identifying control file, check alert log for more info

hi ,
i have a problem when i try to login to oracle
i found this messsage
error
ora-01033 oracle initialization or shutdown in progressafter i logged on with / as sysdba
i did the following
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1248600 bytes
Variable Size 79692456 bytes
Database Buffers 205520896 bytes
Redo Buffers 7139328 bytes
ORA-00205: error in identifying control file, check alert log for more info----------------------------------------------------------------
O.S = Windows 7 Profissional
Oracal release= 10 g release 10.2.0.1.0
the last lines of the alert log file is
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 71303168
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 293601280
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, >E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 205520896
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = e:\oracle\product\10.2.0\db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 15000
pga_aggregate_target = 96468992
PMON started with pid=2, OS id=1560
PSP0 started with pid=3, OS id=208
MMAN started with pid=4, OS id=972
DBW0 started with pid=5, OS id=4092
LGWR started with pid=6, OS id=3812
CKPT started with pid=7, OS id=344
SMON started with pid=8, OS id=3492
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=3276
MMON started with pid=11, OS id=1832
MMNL started with pid=12, OS id=1636
Wed Nov 21 11:44:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Wed Nov 21 11:44:32 2012
ALTER DATABASE MOUNT
Wed Nov 21 11:44:32 2012
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified file
Wed Nov 21 11:44:32 2012
ORA-205 signalled during: ALTER DATABASE MOUNT...Please anyone has any info please share me
thank you ,
regards,
Edited by: ayadsufyan on 21-Nov-2012 01:04
Edited by: ayadsufyan on 21-Nov-2012 01:30

ayadsufyan wrote:
hi ,
i have a problem when i try to login to oracle
i found this messsage
error
ora-01033 oracle initialization or shutdown in progressafter i logged on with / as sysdba
i did the following
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1248600 bytes
Variable Size 79692456 bytes
Database Buffers 205520896 bytes
Redo Buffers 7139328 bytes
ORA-00205: error in identifying control file, check alert log for more info----------------------------------------------------------------
O.S = Windows 7 Profissional
Oracal release= 10 g release 10.2.0.1.0
the last lines of the alert log file is
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 71303168
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 293601280
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, >E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 205520896
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = e:\oracle\product\10.2.0\db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 15000
pga_aggregate_target = 96468992
PMON started with pid=2, OS id=1560
PSP0 started with pid=3, OS id=208
MMAN started with pid=4, OS id=972
DBW0 started with pid=5, OS id=4092
LGWR started with pid=6, OS id=3812
CKPT started with pid=7, OS id=344
SMON started with pid=8, OS id=3492
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=3276
MMON started with pid=11, OS id=1832
MMNL started with pid=12, OS id=1636
Wed Nov 21 11:44:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Wed Nov 21 11:44:32 2012
ALTER DATABASE MOUNT
Wed Nov 21 11:44:32 2012
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified file
Wed Nov 21 11:44:32 2012
ORA-205 signalled during: ALTER DATABASE MOUNT...Please anyone has any info please share me
thank you ,
regards,
Edited by: ayadsufyan on 21-Nov-2012 01:04
Edited by: ayadsufyan on 21-Nov-2012 01:30I'd say the error message is pretty self-evident:
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified fileWhat do you suppose "can not find the specified file" means?
And what does this have to do with database security?

Where are Java Preferences (Applet Runtime Parameters) saved on Mac OS X?

Hi.
If you want to modify the Applet Runtime parameters in Mac OS X, you need to use the "Java Preferences" application located under /Applications/Utilities.
Suppose that I open the "Java Preferences" application, I select a specific JRE version, and I set a runtime parameter of "-Xmx300m" for Applets, in order to increase the max heap size.
Now, where is this setting saved to?
Until recent past, these values used to be saved in the <UserHome>/Library/Caches/Java/deployment.properties file.
But this does not seem to be the case any longer.
Does anyone knows where are these settings currently saved in Mac OS X? I am currently running Mac OS X v10.5.8 with Java 1.6.0_20 installed.
Any help / hint would be greatly appreciated.
Thanks,
Marco.

Check this out:
http://developer.apple.com/documentation/Java/Conceptual/Java141Development/Core_APIs/chapter_6_section_3.html
Hopefully that all fits on one line. Click around that website for just about any Mac-specific info you'll ever need.

JRE 1.4.2 Java Runtime Parameters

Does anyone happen to know where/how these settings are saved on a Windows OS? I'd like to write a program to automatically set this on client machines to make deployment easier as we need to set the -Xmx for each user. I've searched the registry and all files on my machine and turned up nothing. Thanks for any help/suggestions you might have.

The settings are saved in a file named
<windows
folder>\.java\properties<version>e.g.
C:\WINDOWS\.java\properties141_02. The keyname
is javaplugin.jre.params=<runtime params>.You
can see this directly, if you change the runtime
parameters in the Java plugin configuration dialog.
What version of Windows are you running and what JRE
version..only b/c it would be helpful to know if these
settings are saved in different locations depending on
versions. On Win2K Pro & XP Pro w/ JRE 1.4.2 the
settings are in the location I specified in my last
post. Thanks!Sorry, I only checked 1.4.1
My (wrong) idea was, that it wouldn't change frome 1.4.1 to 1.4.2

How to pass runtime parameters to Oracle Query from xMII server

Please can anybody help me that how to pass runtime parameter to Orcle Query from xMII server.

It works the same way as I described in this thread [How to pass runtime parameters to MySQL Query from xMII server]. It does not matter the datasource MII will work the same for all queries, at least for passing in parameters. How to write those queries and their datatypes will be the differences.

How to pass runtime parameters to MySQL Query from xMII server

Please can anybody help in How to pass runtime parameters to Orcle Query from xMII server

The answer is the same as for your other thread. The mechanism is the same regardless of the end database. The SQL syntax will be different for each database vendor depending upon which functions you are invoking. The main areas of difference between SQL Server, Oracle, DB2, etc. deal with dates (times also) and strings, but there are others as well.
Regards,
Mike

Passing Payload data to alert container for all SAP PI erros

Hi All,
I have a alert requirement as follows.
One alert has to be raised for all PI errors including Integration Engine errors and Adapter Engine errors. The scenario is ABAP PROXY >XI->SOAP.
Payload will have n number of fields including Delivery Number and Mail ID of a business User.
Mail has to be triggered from PI to this particular user along with delivery number. Please note this alert has to be triggered for all PI errors ( Mapping, Adapter Error,Apllication Error ...etc).
Triggering alert from an UDF by calling report SALERT_CREATE does cover only integration engine errors.It should not cover any adapter engine error.
By creating a alert rule and alert category in RWB will not have Payload data in the mail and Alert will be sent to fixed receipients. Alert rule does cover all PI errors.
How should i do this>

Hey
By regular alert mechanism,this is not possible,you need to use BPM to trigger e-mail to include delivery number.
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
>>Mail has to be triggered from PI to this particular user along with delivery number
Well this can only be done via mail adapter,alert mechanisms need a specific user ID or user with specific roles.
Thanks
Aamir

Alert system for chain process

Hello,
I want to configure the alert system for when an error occurs in processing chains.
I followed the steps in the forum THROUGH ALRTCATDEF transaction, but I can not do the following, which is what I really need;
That the key responsibility for a particular user cube notifications will arrive Error loading this cube, not all the cubes.
All I've got to make is that the error messages will reach all key users regardless if you have access to that hub or not.
Sincerely,

Hi Use
Use Tbales RSSELDONE and REREQDONE and take the status an dthen raise a message using the following Program
DATA : is_doc_chng        TYPE sodocchgi1,
       it_objtxt          TYPE STANDARD TABLE OF solisti1,
       is_objtxt          TYPE solisti1,
       it_objpack         TYPE STANDARD TABLE OF sopcklsti1,
       is_objpack         TYPE sopcklsti1,
       it_objbin          TYPE STANDARD TABLE OF solisti1,
       is_objbin          TYPE solisti1,
       it_reclist         TYPE STANDARD TABLE OF somlreci1,
       is_reclist         TYPE somlreci1,
       w_lines_tx         TYPE i.
       is_doc_chng-obj_descr = 'Auto genareted Mail from BW'.
       is_objtxt-line = 'This is an automatically generated mail. Please do not reply to it.'(028).
       APPEND is_objtxt TO it_objtxt.
       is_objtxt-line = space.
       APPEND is_objtxt TO it_objtxt.
DESCRIBE TABLE it_objtxt LINES w_lines_tx.
READ     TABLE it_objtxt INTO is_objtxt INDEX w_lines_tx.
is_doc_chng-doc_size = ( w_lines_tx - 1 ) * 255 + STRLEN( is_objtxt ).
CLEAR is_objpack-transf_bin.
is_objpack-head_start = 1.
is_objpack-head_num   = 0.
is_objpack-body_start = 1.
is_objpack-body_num   = w_lines_tx.
is_objpack-doc_type   = 'RAW'.
APPEND is_objpack TO it_objpack.
is_reclist-receiver = 'SURENDRA.REDDY'@'ABC.IN'.
is_reclist-rec_type = 'U'.
APPEND is_reclist TO it_reclist.
CLEAR is_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data              = is_doc_chng
    put_in_outbox              = 'X'
    commit_work                = 'X'
TABLES
    packing_list               = it_objpack
    contents_txt               = it_objtxt
    receivers                  = it_reclist
EXCEPTIONS
    too_many_receivers         = 1
    document_not_sent          = 2
    document_type_not_exist    = 3
    operation_no_authorization = 4
    parameter_error            = 5
    x_error                    = 6
    enqueue_error              = 7
    OTHERS                     = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thaks
Reddy

How to override runtime parameters of Java programs in web browser windows?

Hi Oracle forumers,
There's a Java based program that is accessed through a web browser. The program somehow sets its own runtime parameters. However, those parameters don't always work well for running the program on every computer. Is there a way to override the runtime parameters that the program would normally set with my own parameters? I was expecting the Java Control Panel applet to be the place to set my own runtime parameters but the last time I checked that didn't work with this program.

Sangeetha Kalyani,
Use SWF de-compiler.. and get the source of your SWF.. i think this will simplyfy your JOB...!
Thanks,
Pradeep

Java Runtime parameters- setting trace/log levels and enabling by default

Hi,
I have a user reporting that a Java app that I support is unexpectedly quitting, and our developers are having trouble tracking down exactly what's causing the problem.
I'm trying to enable the maximum possible logging/tracing for this user, but I don't want to have to rely on them remembering to hit '5' on the console window to enable tracing on everything. Having read through the runtime documentation, I have added the following to my JRE runtime parameters:
-Xdebug -Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect -Djavaplugin.outputfiles.overwrite=falseHowever, I still get nothing in the log file until I manually hit '5' on the Java console, then everything I do after that gets added to the log.
Does anyone know how can I get the maximum logging/tracing enabled by default as soon as the JRE is loaded?

>>
-Xdebug -Djavaplugin.trace=true-Djavaplugin.trace.option=basic|net|security|ext|livec
onnect
-Djavaplugin.outputfiles.overwrite=false
One problem is that -Djavaplugin.trace.option=basic
OR net etc ... pick one of the options which are
separated with pipe symbols or use "all" without
quotes.
I'm having a similar problem with Java 6 - it seem
that nothing I put in the runtime parameters takes
effect. I had to edit
/home/USERNAME/.java/deployment/deployment.properties
and add deployment.trace=true.On second thought, I could be wrong about the trace options. I really don't know if you can combine options but I did see "all" somewhere.

Alert Raising for RunTime Parameters

Similar Messages

Maybe you are looking for