Alert to Error in Receiver determination mapping

Hi everyboy.
Im using a mapping to decide the receiver determination (ReceiverDetermination - http://sap.com/xi/XI/System).
I can´t configure an alert when the mapping fails.
How could I do that????
Thanks a lot

Hi Christian,
As per my understanding you are using extended receiver determination by creating an interface mapping in between your outbound interface and standard receiver interface of SAP BASIS.Do you mean to say that if source data doesnot fulfill the condition to determine any receiver.If so, then I believe in SXMB_MONI we can find the error as unable to determine receiver.Since it belongs to mapping so it will be executed in Integration engine.
create an alert category in ALRTCATDEF
Define Alert Rule in RWB -> Alert Configuration
Select the our own Alert Category
Click to Add Rule and activate the corresponding rule
Regards,
Nutan

Similar Messages

Reg: Error at Receiver determination

hi friends
i have designed a scenario for JDBC to RFC and while testing that scenario at configuration part i found the error that "receiver determination is not found" i also tested with file to file scenario and found the same error . can anyone suggest how to overcome this error and what might be the error.
with regards
sharmista

Hi Dadapure sharmishta,
Have you provided any conditions in the receiver determination? In that case make it sure that the condition is getting satisfied. Also check if all the objects are activated. Check the sxi_cache for cache related issues.
Thanks and Regards,
Sanjeev.

Error in receiver determination - Client proxy to IDOC using PI-IS

Hi,
I am using client proxy to send the order acknowledgement from SCM to R/3 , I am getting below error
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
I am using the standard SAP message interface in the sproxy.
Also I am getting error in Proxy generation "Logical port template not determined" "LPT could not be created without DT".
Thanks,
Menaga

<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
The above error occurs due to:
1) You have configured a wrong receiver service in the Receiver Determination
2) You have configured the correct receiver but the cache is not updated
So check if the receiver service exists and the cache is updated.
Also I am getting error in Proxy generation "Logical port template not determined" "LPT could not
be created without DT".
Check if you get any lead from this thread:
Failed to time to generate proxy - TRX SPROXY
Does it mean that you have no proxy generated and you are testing??....if yes then you will get the above error (NO_RECEIVER_CASE_ASYNC).
Regards,
Abhishek.

XPath Error in Receiver Determination

Hi All,
I hav an outbound message coming out of ERP (Non IDoc). I have to route the message based on the field DESTINATION in the message. The payload in the SXMB_MONI is as follows.
<?xml version="1.0" encoding="utf-8" ?>
<nr1:OLabelling_OB xmlns:nr1="http://cpe.com/cpe_ftp_wms/Labelling/OL">
<Label>
<DESTINATION>XXXX</DESTINATION>
<PRPRORD>0001005683</PRPRORD>
</Label>
</nr1:OLabelling_OB>
In the receiver determination, I hav chosen the XPath button and given the following value
/nr1:OLabelling_OB/Label/DESTINATION.
This doesn't work. i had also tried giving the namespace and the prefix as
nr1 http://cpe.com/cpe_ftp_wms/Labelling/OL. but that dint help either.
If i remove the condition, then it is working fine.
Any help in this regard?
Thnx in Advance.
Anil

I had activated and checked......it was not getting displayed.......
But i checked the xpath rules and used a work around solution for this. as per the xpath rules if i enter xpath as //DESTINATION, it picks up the DESTINATION field from anywhere in the document. and that worked.
Thnx for ur help so far...
anil

Error in Receiver Determination

Hi,
I am getting this error in the intergration engine, please help.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160).</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the receiver: Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: CL_SWF_RLS_COMPARISON=========CP, include: CL_SWF_RLS_COMPARISON=========CM002, line: 63). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: SAPMSSY1, include: , line: 0). Exception CX_SWF_EXP_EVALUATE occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM027, line: 38). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM01Z, line: 520). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SAI_SWF_RULE_ENGINE========CP, include: CL_SAI_SWF_RULE_ENGINE========CM00S, line: 42). Problem when processing the XPath expression /MBGMCR02/IDOC/E1BP2017_GM_ITEM_CREATE/[normalize-space(STGE_LOC)]</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Dear Ravi Kanth,
As for as my knowledge its shows the Exception: Operand Missing CX_SWF_RLS_OPERAND_MISSING occurred,
Plz check in your condition in detemining Receivers used proper operands.
Best Regards
Praveen

Runtime error in Receiver determination

Hi All,
While testing my configuration in ID, it shows an Runtime error message "Message is incomplete. No Sender found".
Note: I testing for a File to Idoc Scenario.
Regards,
Nithiyanandam

Hi,
 Message is incomplete. No Sender found". -- I guess you are not selected the Sender Service,Interface,Namespace and Receiver service in Header section.Before RUN the test configuration you need to check that have you choosen the proper sender and reciver in Header section.
Hope it will helps to you, Check it out the same and try to test the configuration.
Cheers
Veera

Redarding receiver determination

hi all
iam ajay,
here i faced a problem at xi server. even i created the receiver determination it alerts an error in receiver determination.i furnished my error below.
let me know the solution
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem extracting values from the message: The exception occurred (program: CL_SAI_SWF_RULE_ENGINE========CP, include CL_SAI_SWF_RULE_ENGINE========CM006, line: 93)</SAP:P1>
<SAP:P2 />

Hi Ajay,
Have you defined a rule for the receiver determination.
Please can you check on this thread. Same issue
Error evaluation condition in receiver determination
Regards
Vijaya

Error in Extended Receiver Determination

Hello Experts,
We are working on a scenario where, we are using Extended Receiver Determination.
In this reveiver determination mapping we are doing JDBC lookup and some receivers are determined on that basis.
Also, we have a default receiver in mapping.
We are using: SAP PO 7.4 SP 7
We are getting below error while testing from WSnavigator/SOAP UI, but mapping works when we test it in ESR.
Error:
<s:SystemError xmlns:s='http://sap.com/xi/WebService/xi2.0'>
 <context>XIAdapter</context>
 <code>ADAPTER.JAVA_EXCEPTION</code>
 <text><![CDATA[
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.xi.routing.RoutingException: Error while executing receiver determination mapping.
at com.sap.aii.adapter.soap.web.SOAPHandler.processSOAPtoXMB(SOAPHandler.java:773)
at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:530)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:202)
Kindly help.

hi,
you r trying to impliment Lookup for the file adapter which is not synch in nature and hance u r not getting the responce back.
please find the link which deals with how to impliment lookup for file adapter.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file%252blookup%252bin%252budf.
now once u get rhe runtime receiver u can perform enhanced receiver determination (write a simple UDF)
regards,
navneet.

Error while doing Enhanced Receiver Determination

Hi,
My scenario is Fiel->XI->File with enhaced receiver determination that is i should get the receivers dynamically at runtime.
I gave Operation mapping in Receiver determination and created all other objects.
Even if i check message mapping i am getting multiple receivers but, in SXMB_MONI i am getting the following error
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: Error when parsing receiver listLength of XML document 144</SAP:P1>
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: Error when parsing receiver listLength of XML document 144 Problem while determining receivers using interface mapping: Error when parsing receiver listLength of XML document 144 Error when parsing receiver listLength of XML document 144 System expected the element 'Receivers'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Can anyone suggest
Regards,
Sunitha

Hi,
I am getting error in Receiver Determination step only. so, unable to see the receivers.
Is there any option to check that particular message which conists of receivers in PI.
"In every receiver root node only one receiver can exist.
you have to reapeat the root node for every receiver. "
ya i changed the occurance of the message type. In message mapping i am getting multiple root nodes at target but in SXMB_MONI i got that error.
Regards,
Sunitha

Extended receiver determination and Dynamic attributes

Hello,
is it possible to access dynamic attributes within an extended receiver determination? Can I modify / set dynamic attributes of an XI message within an UDF in the extended receiver determination mapping?
In detail: In my scenario I want to use an extended rec. determination, make a lookup in a DB inside the determination in order to define the receiver, and based on the lookup result I want to add some information as dynamic attributes to the XI message, which then can be accessed in the interface determination as conditions.
Thanks,
Chris

Hi,
In my scenario I want to use an extended rec. determination, make a lookup in a DB inside the determination in order to define the receiver, and based on the lookup result I want to add some information as dynamic attributes to the XI message, which then can be accessed in the interface determination as conditions - See you can do a DB lookup in a msg mapping........but by the time you have reached msg mapping your receiver determination will be done......so your receiver is already decided............Extended recever determination is for dynamically choosing a recever based on source msg's data.........
Regards,
Rajeev Gupta

Receiver Determination Not Found

Hi all,
Currently we integrating SAP ECC with TM using PI ,we have followed the standard document given and done the configuration steps ,
"Installations and Upgrades - R" SAP Rapid Deployment solutions" SAP Transportation Planning for Shippers RDS" SAP TM DTP RDS" SAP TM DTP RDS V2.90",the reference document is from the above link.
ECC has triggered an workflow which is in format of XML ,but when we checked in SXMB_Moni,i am getting the below error.
Receiver Determination: No Receiver could be determined
2:26:30 PM
2:26:30 PM
SHDCLNT900
http://sap.com/xi/APPL/Global2
BusinessDocumentFlowTMInformationbyBusinessObjectReferenceQueryResponse_Out
CENTRAL
"Current Status"
Synchronous
BE
IENGINE
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
53EB863237550A10E10080000A1A016E
sender =>R/3 system
Receiver=>TM system .
Your help is badly needed

hi Hareesh,
please find the below screen shot of my ID objects ,we generated it using "Apply Model From ES repository".

No receiver determination found in spite of correct url

Hi everybody,
our partner tries to reach our XI on https adapter to start a synchronous process. The url is as follows:
https://[host]:[port]/sap/xi/adapter_plain?party=[PARTY]&service=[SERVICE]&interface=[INTERFACE]&namespace=[NAMESPACE]
I can see the message in the TA: sxmb_moni but there is always the error: No receiver determination found. But everything is correct. There IS a valid receiver determination set up. Are there any other parameters that have to be put into the url to get that connection online?
Regards.
Oliver.

Yes please...the reason i am asking you try this is that in the comments of the HTTP inbound handler...you see what is below....so i am asking you to put the parameters that seems to be mandatory from this...
call-syntax: XI 3
http://hostname:port/path
 ?namespace=???
 &interface=???
 &service=???
 &party=???
 &agency=???
 &scheme=???
 [&qos= EO|BE|EOIO]
 [&msgguid=???]
 [&queueid=???]
 [&trace=[1|2|3]]
Thanks,
Renjith

Multi Mapping using condition & Dynamic Receiver determination – Used XSLT Mapping

Dear Experts,
 I am struggling to identify an error on the Technical Routing. Firstly according to my scenario, I receive an XML file with multiple PO's and I have to split the file to 2 different target messages. and also according to the source payload I have to send the file to 2 different receivers. first receiver is ABAP Proxy to the back end system and the 2nd one is to a file location. I have used XSLT to split the message into 2 target message type and I have used a XSLT mapping for receiver determination. Does any one have any idea of what I am doing wrong.
Note: some time I will only be able to fill in on target message.
I have attached my XSLT message split mapping with this post, please let me know if you have further question.
Your help is more appreciated.
Advance Thanks,
Pradeep
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" version="1.0">
<xsl:variable name="vFlag"/>
<xsl:variable name="vPONUM" select="POTRACKING/Lines[1]/PONumber"/>
<xsl:template match="/">
 <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <ns1:MT_Tracking xmlns:ns1="http://www.findel-education.co.uk/axapta">
 <xsl:for-each select="POTRACKING/Lines">
 <sap:call-external class="ZCL_VNAP_OBJECTS" method="CHECK_PO_EXIST">
 <sap:callvalue param="IP_EBELN" select="string(PONumber)"/>
 <sap:callvariable name="vFlag" param="EP_BOLEAN" type="string"/>
 </sap:call-external>
 <xsl:if test="$vFlag = 0">
 <Lines>
 <DDate>
 <xsl:value-of select="DespatchDate"/>
 </DDate>
 <PONumber>
 <xsl:value-of select="PONumber"/>
 </PONumber>
 <POLine>
 <xsl:value-of select="POLine"/>
 </POLine>
 <QTY>
 <xsl:value-of select="Quantity"/>
 </QTY>
 <VendorMaterial>
 <xsl:value-of select="VendorMaterialNumber"/>
 </VendorMaterial>
 <AccountRef>
 <xsl:value-of select="AccountReference"/>
 </AccountRef>
 <ConsignNumber>
 <xsl:value-of select="ConsignmentNumber"/>
 </ConsignNumber>
 <CarrierURL>
 <xsl:value-of select="CarrierURL"/>
 </CarrierURL>
 <ConsignURL>
 <xsl:value-of select="ConsignmentURL"/>
 </ConsignURL>
 </Lines>
 </xsl:if>
 </xsl:for-each>
 </ns1:MT_Tracking>
 </ns0:Message1>
 <ns0:Message2>
 <ns2:MT_Tracking xmlns:ns2="http://www.findel-education.co.uk/ecc/ax/po/ftp">
 <xsl:for-each select="POTRACKING/Lines">
 <sap:call-external class="ZCL_VNAP_OBJECTS" method="CHECK_PO_EXIST">
 <sap:callvalue param="IP_EBELN" select="string(PONumber)"/>
 <sap:callvariable name="vFlag" param="EP_BOLEAN" type="string"/>
 </sap:call-external>
 <xsl:if test="$vFlag = 1">
 <Lines>
 <DDate>
 <xsl:value-of select="DespatchDate"/>
 </DDate>
 <PONumber>
 <xsl:value-of select="PONumber"/>
 </PONumber>
 <POLine>
 <xsl:value-of select="POLine"/>
 </POLine>
 <QTY>
 <xsl:value-of select="Quantity"/>
 </QTY>
 <VendorMaterial>
 <xsl:value-of select="VendorMaterialNumber"/>
 </VendorMaterial>
 <AccountRef>
 <xsl:value-of select="AccountReference"/>
 </AccountRef>
 <ConsignNumber>
 <xsl:value-of select="ConsignmentNumber"/>
 </ConsignNumber>
 <CarrierURL>
 <xsl:value-of select="CarrierURL"/>
 </CarrierURL>
 <ConsignURL>
 <xsl:value-of select="ConsignmentURL"/>
 </ConsignURL>
 </Lines>
 </xsl:if>
 </xsl:for-each>
 </ns2:MT_Tracking>
 </ns0:Message2>
 </ns0:Messages>
</xsl:template>
</xsl:stylesheet>

Hi Hareesh,
Please find my determination in the XSLT below, I am using enhanced receiver determination.
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" xmlns:p1="http://sap.com/xi/XI/System" xmlns:ns="urn:sap-com:document:sap:idoc:messages" version="1.0">
<xsl:variable name="vFlag"/>
<xsl:variable name="vAX" select="0"/>
<xsl:variable name="vSAP" select="0"/>
<xsl:variable name="vBoth" select="0"/>

<xsl:template match="/">
 <xsl:for-each select="POTRACKING/Lines">
 <sap:call-external class="ZCL_VNAP_OBJECTS" method="CHECK_PO_EXIST">
 <sap:callvalue param="IP_EBELN" select="string(PONumber)"/>
 <sap:callvariable name="vFlag" param="EP_BOLEAN" type="string"/>
 </sap:call-external>
 <xsl:choose>
 <xsl:when test="$vFlag = 0">
 
 <xsl:variable name="vAX" select="$vAX + 1"/>
 </xsl:when>
 <xsl:when test="$vFlag = 1">
 
 <xsl:variable name="vSAP" select="$vSAP + 1"/>
 </xsl:when>
 </xsl:choose>
 </xsl:for-each>
 <xsl:if test="$vSAP > 0">
 <xsl:if test="$vAX > 0">
 <xsl:variable name="vBoth" select="$vBoth + 1"/>
 <xsl:variable name="vSAP" select="0"/>
 <xsl:variable name="vAX" select="0"/>
 </xsl:if>
 </xsl:if>
 <xsl:if test="$vBoth > 0">
 <p1:Receivers>
 <Receiver>
 <Service>
 <xsl:text>BS_AXAPTA_TST</xsl:text>
 </Service>
 </Receiver>
 <Receiver>
 <Service>
 <xsl:text>BS_ECQCLNT300</xsl:text>
 </Service>
 </Receiver>
 </p1:Receivers>
 </xsl:if>
 <xsl:if test="$vAX > 0">
 <p1:Receivers>
 <Receiver>
 <Service>
 <xsl:text>BS_AXAPTA_TST</xsl:text>
 </Service>
 </Receiver>
 </p1:Receivers>
 </xsl:if>
 <xsl:if test="$vSAP > 0">
 <p1:Receivers>
 <Receiver>
 <Service>
 <xsl:text>BS_ECQCLNT300</xsl:text>
 </Service>
 </Receiver>
 </p1:Receivers>
 </xsl:if>
</xsl:template>
</xsl:transform>

Send Alerts(e-mail) for errors in SXMB_MONI(message mapping exceptions)

Good afternoon !
        I´m configuring SAP Netweaver PI 7.0(SP13) to use Alert Framework to send Alerts when errors occurs in the interfaces processing.
        I just achieved configure to send alerts when errors ocurrs in the Adapter Framework but, I can´t configure correctly to send alerts when errors ocurred only in SXMB_MONI(for example, message mapping exception in asyncronous interface).
        I just followed the instructions at Michal Krawczyk
weblog(/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step) and, initially, this was not sufficient to start to send alert when errors occurs only on SXMB_MONI, so, I researched and found some configurations to do in CCMS(started from here: http://help.sap.com/saphelp_nw70/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/content.htm), jobs to start events collectors, etc, and after this, I could see a mail for an message mapping exception. BUT, this message, sent from CCMS to ALM, doesn´t carry out all the message parameters, like message Id, sender(service, interface), receiver(service, interface), that is very important to help to find the message with errors to be solved.
        There is somebody here that already done the Alert configuration to send messages for errors found only in SXMB_MONI(Monitor for processed XML Messages) ?
        There is a better way to achieve this ?
        Thank you for your attention,
        Wilson Rodrigo dos Santos
        SAP Netweaver XI/PI Consultant

Hi
Go through these links and follow it.
ALERTS CONFIG AND STUFF
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) u2013 UPDATED
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Simple Steps to Get Descriptive Alerts from BPM in XI
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Triggering XI Alerts from a User Defined Function
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
/people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
Thanks
Saiyog

Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all

Hello,
I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
Iam reading a flat file and trying to write into an XML in the same FTP server
I have a 1 to 1 Mapping as follows
And my Content Conversion at Sender side Looks like this
After running the configuration Iam getting following error message
Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
My System is the SAP Netweaver Process Intgration 7.4 single Java stack
Do you have any idea how to fix this issue?
Many thanks in advance
Khadim

Hi evrybody
I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
<ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
<Recordset>
<header>
 <gesellschaft>03</gesellschaft>
 <filiale>000</filiale>
 <satzart>11</satzart>
 <datum>00000000</datum>
 <kennzeichen>1</kennzeichen>
</header>
</Recordset>
</ns:hartgeldbest_ERP_KT>
The issue is on detrmining the RECEIVER in the Main-XML
<sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
<sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
<sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/>
<sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
</sap:Sender>
<sap:Receiver>
<sap:Party agency="" scheme=""/>
<sap:Service/>
</sap:Receiver>
<sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
</sap:Main>
Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
Any idea?
Thx
Khadim

Alert to Error in Receiver determination mapping

Similar Messages

Maybe you are looking for