Alets for sender adapter

Is it possible to handle the sender adapter errors/exceptions thru alerts?
Regards,
Naresh

Hello Naresh,
Alerts can be defined for different categories like AE, IE etc.
Go thru the following links as each gives u some specific information and use which ever is necessary:
Configuring "Alert Configuration" in XI 3.0 -- will provide how to configure the elements
The specified item was not found. -- will provide Step by Step process. In this blog , u can select the option AE, IE according to ur requirement in the category mentioned.
Cheers!
Karicharla

Similar Messages

HTTP GET for sender adapter possible ?

I have to get XML-messages from third party webservice. I should use HTTP GET to get the data but is this possible in XI ? I mean like RFC->XI->HTTP(GET) and I would process the response from HTTP GET call.

Hi Jari,
For getting response from web service, you should use SOAP adapter.
Anyways,if it for web application, you can use HTTP get in XI for synchronous communication.
Have a look at these blogs for details -
1. /people/amol.joshi2/blog/2006/06/28/must-fire-a-http-get-from-xi---try-this
2. /people/william.li/blog/2007/09/07/posting-and-testing-using-xipi-http-adapter
Regards,
Sunil Chandra

File Content Conversion for Multi Hierarchical Structure for Sender Adapter

Hi Gurus,
My text file is coming as
Header,filed1,field2(Occurrence=1)
Content,field3,field4(Occurrence =1-Unbounded)
Detail,field4,field5(Occurrence = 1-unbounded)
Trailer,fieldN(Occurrence=1)
My requirement is to write a file content conversion, so that, in the resultant XML Structure the Detail will come under Content.
I have defined the Record Set Structure as
Header,1,Content,*,Detail,*,Trailer,1
But after FCC, the Detailed record is coming in the same level as the Content Record. But the business requires that, the Detailed Record should come under Content Record, so that they can correlate.
Could any one advise?
Regards,
SS
Edited by: Subhendu Sahu on Jun 17, 2011 4:43 PM

Hi,
Please use the below parameters -
○       NameA.keyFieldValue
Specify the value of the key field for the structure.
This entry is mandatory if the key field name is set. Otherwise, the entry is ignored.
NameA.keyFieldInStructure
■       If the key field of the substructure is to be added to the XML document, enter add. This is the default.
■       If the key field is to be ignored, enter ignore.
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/6713ec3f914ddee10000000a1553f7/frameset.htm
cheers,
Sunil

System date in file name for Sender Configuration

Hi all,
I need to retrieve some files every day from my source directory, using the system date as a mask for the filename. Is it possible to do any kind of dynamic configuration for Sender Adapter? I only need to read the files with the current system date every day.
Thanks in advance.

Hi,
>
only need to read the files with the current system date every day.
Sorry failed to see this.
Not currently possible without workarounds in XI.
1. Use a Staging folder where the senduing system will put the files. Write a shell script which will move only the current date files to the folder on which XI is polling. Here , you can use wild card characters.
2. Module option , not sure how it will work. You will be doing an I?O inside the module code and this is not recommended. Also, what will be the trigger for your interface if you are planning to use a module to read the files on the basis of System Date.
Regards
Bhavesh

Need help to Configure FTPS connection for File Sender Adapter

Hi,
I want to Configure, FTPS connection (Secured Connection) for File Sender Adapter. Could anyone please guide me, what Information I require to configure. I just want to know what Information should I request the team inorder the configure FTPS so that it can be deployed properly.
I have checked with [SAP Help Link|http://help.sap.com/saphelp_nw04/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm] and while configuring the communication channel found that I need Keystore and the X.509 Certificate and Private Key. which needs to be deployed on the J2EE server by using the Visual Administrator.
Is there anything else, I need to configure.
Any help would be appreciated in this regard.
Thanks & Regards,
Varun.K

The basic things are Certificate/Keys which you already know. Usually it is enough for running a sceanrio.
However, if you have additional requirements, like FTPS for "Connection Security" for encryption, then you may need additional details like commands. Rest all settings are same as FTP.
Regards,
Prateek

UDF to get the filename for File Sender Adapter

Hi,
I had an requirement to get the the Filename and map to the target payload.
I had configured the File Sender Adapter settings in the ID
This is the following UDF i got from SDN.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
But when iam using this UDF iam getting an error
RuntimeException in Message-Mapping transformation: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._MM_ORDER_CRS_OB_SAP_PROXY_IB_ method Filename$[com.sap.aii.mappingtool.tf3.rt.Context@54e154e1]
Please help me in correcting the error.
Thanks
Srinivas

Hi Jayson,
actually, in the interface mapping, it doesn't give exception.
The DynamicConfiguration is a constant retrieved from the container object, so it will never be returned as null (given that the container object was instantiated).
Just the retrieved value will be null (since it was not previously set), but no exception occurs.
In the message mapping, the container object is never instantiated, and that's the reason for the NullPointerException.
Regards,
Henrique.

Required Changes in FCC Paramenters for Sender File Adapter.

Hi
I am Doing File-File Scenario.I am using FCC in the Sender File Adapter. I have defined the structure as below.
My Source Structure
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source xmlns:ns0="http://city.net/filecopy">
 <Message>
 <Id>123</Id>
 <Head>
 <Id>123</Id>
 <Filename>test.xml</Filename>
 </Head>
 <Body>Helloworld</Body>
 </Message>
</ns0:MT_Source_FILE>
So for the above structure, I have defined the FCC Parameters as
Document Name: MT_Source (Message Type)
Document Namespace:http://city.net/filecopy(Namespace)
Recordset Name: Message (root node)
Recordset Structure: Message,1,Head,1
Recordset Sequence: Ascending
Recordsets per message:1
Keyfield Type: string
In the Table Rows I have defined
Message.fieldFixedLengths: 3,10
Message.fieldNames: Id, Body
Message.fieldSeparator: ,
Message.endSeparator: 'nl'
Head.fieldFixedLengths: 3,8
Head.fieldSeparator: ,
Head.endSeparator: 'nl'
Head.fieldNames: Id, Filename.
My Input Text file
123,Helloworld
123,text.xml
I am Getting Output as
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Source xmlns:ns="http://city.net/filecopy">
- <Message>
- <Message>
<Id>123</Id>
<Body>HelloWorld</Body>
</Message>
- <Head>
<Id>123</Id>
<Filename>test.xml</Filename>
</Head>
</Message>
</ns:MT_Source>
I should get Body field after Head Structure as in the Source Structure, So Please what changes do I need to do in the Parameters Specified above to get the desired Output.
So How should I define the FCC Paramenters For Sender File Adapter ?
Any Help Would be Appreciated.
Regards,
Varun

Hi Everyone,
I could Succeed to some extent.
I have defined the parameters as follows
Recordset Structure: Message,*,Head,1
Key Field Name: KZ
Key Field Type: integer
In the table, I defined the Parameters as
Message.fieldFixedLengths:1,3
Message.fieldNames:KZ,Id
Message.keyFieldValue:1
Message.keyFieldInStructure:ignore
Message.fieldSeparator:,
Message.endSeparator:'nl'
Head.fieldFixedLengths:1,3,8
Head.fieldNames:KZ,Id,filename
Head.keyFieldValue:2
Head.keyFieldInStructure:ignore
Head.fieldSeparator:,
Head.endSeparator:'nl'
Message.fieldFixedLengths:1,11
Message.fieldNames:KZ,Body
Message.keyFieldValue:3
Message.keyFieldInStructure:ignore
Message.fieldSeparator:,
Message.endSeparator:'nl'
My source text file
1,123
2,123,test.xml
3,Hello World
my output is
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Source xmlns:ns="http://city.net/FileCopy">
- <Message>
- <Message>
<Id>123</Id>
</Message>
- <Head>
<Id>123</Id>
<Filename>test.xml</Filename>
</Head>
</Message>
</ns:MT_Source>
I got the output almost correct except I am not getting the value in the Body
Any help would be appreciated.
Please correct me If I am wrong.
Regards,
Varun
Edited by: Varun on Sep 2, 2008 12:06 PM
Edited by: Varun on Sep 2, 2008 12:15 PM

Problem in file sender adapter for newline character

Hi All,
I'm trying to read a file of only one record with the following fields.
Name
Age
Place
Each field is seperated by a new line which is the cause of the problem.
The problem is the value 'nl' for x.fieldSeperator is not been recognised in file sender adapter.
The adapter creates a new record (new XML) for each individual field seperated by new line.
I've tried even with the corresponding hexadecimal values '0x0a' and '0x0d'.
Looking for some help.
Thanks,
Joe.

Hi Shabarish,
Thanks for your reply. But I tried that too already... It also didn't work..
File adapter is successful... But it generates seperate records for each fields that's wat the prob is..
Thanks,
Joe.

Key Field Value for File Adapter Sender Wildcard

Hello everybody, is there a way to use a wildcard for the property of NamA.keyFieldValue in the cc for a Fils Sender????, here's an example why, I need to take some Files via PI 7.0 and my key filed can change according to the file an example is that in a file can be HF28 and in another file can be HF29, the only character that is going to be constant is the H, I would really appreciate any suggestions, thanks in advance.
Regards,
Julio Cesar

Hi Julio
File sender adapter will read the file using FCC
Key Field Value entry is mandatory if the key field name is set. Otherwise, the entry can be ignored
http://help.sap.com/saphelp_nw70/helpdata/EN/34/393071e9b998438ddb8ce97cd617a1/frameset.htm
Content Conversion ( The Key Field Problem )
Thanks
Gaurav Bhargava

File selection sequence in the FTP connection for File Sender Adapter

Hi,
I have a file to Proxy scenario using FTP connection parameters.
If there are multiple files in the sender folder, XI picks up the files randomly with no processing sequence.
I want XI to pick up the files based on the date time stamp meaning the oldest file created in the folder should be processes first and rest all in sequence there after.
I know processing sequence can be set for NFS connection but not for FTP .
Please suggest if there's any way to make this work.
Thanks in advance.
Thanks and Regards,
Amit Bhagwat.
Edited by: Amit Bhagwat on Nov 4, 2009 5:17 AM

Hi
For the Transport Protocol "File Transfer Protocol (FTP)" files are always processed in ascending alphabetical order
If you want the file to be processed in sequence then you can use Quality of Service EOIO in the sender adapter.
The files are processed in the sequence they are picked up.
otherwise use BPM for File Sequencing..
Refer the following Threads
FTP Sender Adapter - Processing Sequence
Processing Sequence issue of FTP protocol
Regards
Abhijit
Edited by: Abhijit Bolakhe on Nov 4, 2009 10:32 AM

Mail sender adapter POP server not configured for URL access

Hi Experts,
I have a Mail --> PI --> R/3 scenario and I am configuring the Mail sender adapter for POP3. The issue is that the POP server is not configured to be accessed via a URL and hence the URL pop://hostname/ is causing the following error at runtime:
_1. When I use pop://Fully qualified host name/
_Error: exception caught during processing mail message; java.net.UnknownHostException
_2. When I use pop://IP address of host/
_Error: exception caught during processing mail message; java.net.SocketException: Connection timed out:could be due to invalid address
I am able to ping the POP3 server from the PI server using both the FQDN and IP address.
Can someone please help.
Thanks,
Shobhit
Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM
Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM

Hi Shobhit
Check with these notes:
804102
xi 3.0 mail adapter with pop3 user authentication problem
810238
XI 3.0 Mail Adapter for POP3 may not report some errors
also check mailserver security settings ...
Connection refused occures when XI cannot connect
in most cases so try checking it again , maybe some ports are not opend on the firewall
Thanks
Edited by: Abhishek Agrahari on Jul 14, 2009 11:44 AM

Mail Sender Adapter for Exchange 2007 IMAPS account

Hi everybody,
I have the following todo:
I configured a Mail Sender Adapter that is supposed to fetch mails from an IMAP account.
The mails contain text files with data to be processed by XI 3.0 SP 22.
The mail server is Exchange 2007 and requires IMAPS. IMAP is not enough. I read the notes
- 893590 - XI 3.0 Mail sender adapter with IMAP or POP with SSL problem
- 856599 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 Mail Adapter
and configured the sender apapter as follows:
URL: imaps://<ip address>/owa
Authentication method: Plain
User: <domain>\<user>
Password: topsecret
Poll Interval: 5
The first challenge is to setup the adapter with SSL. To do so, I added the Exchange server's
root SSL certificate in the default truststore service-ssl via the KeyStorage service.
This is necessary, as far as I know, to successfully validate the Exchange server's trusted
certifacate which is being transfered to XI during SSL handshake.
Since the communication channel in RWB is in status error with following message:
mail client job stopped completly
exception caught during processing mail message; java.io.IOException: invalid IMAP status response; not finding * STATUS, but 001I NO owa doesn't exist.
mail client job scheduled,
I do not know how to setup SSL for IMAPS. I successfully tested a PING to the Exchange server.
Are there already experiences with Exchange 2007?
What I have to do to fetch mails from an Exchange 2007 IMAPS folder/account with a Mail Sender Adapter?
Kind regards,
Andreas

Hi,
It should be imap and not imaps.
You can try imap://xxx.xxx.de:993/Inbox
Make sure that port 993 is correct. If you have doubt, then you may try 143 which is default port instead of 993 in the above url.
regards,
ganesh.

Sender adapter request response bean not working for calling a webservice

Hi All,
In PI 7.31, My scenario : SOAP sender Asynch-> PI -> HTTP Receiver Sync ->take response to call another webservice (SOAP)
I have configured request response bean and response one way bean in the sender adapter to make this work.
Attached the screenshot of the module config in the sender soap adapter. The final response from HTTP has to be used to call another webservice (not sender webservice)
This giving an error "couldn't retrieve binding values for sender to receiver etc etc ----------"
Has anyone configured response one way bean to call a webservice to submit? If so, please share the configuration details. And let me know if I am doing anything wrong
thx
mike

Hi Michael,
I think the adapter type is for the receiver channel looking at the documentation SAP Library - SAP Exchange Infrastructure
Have you checked your receiver channel doesn't belong to a party?
I havent tried this bridge with the http_aae but looks to be problematic according with Michal comment here http://scn.sap.com/community/pi-and-soa-middleware/blog/2014/01/28/generic-pi-async-sync-bridge-configuration-for-any-adapters#comment-454463
Regards.

Prerequisites for Sender and Receiver FTP adapter

Hi Experts,
I am new to PI and configuring simple file to file scenario. I need to know the prerequsites for sender and receiver FTP adapter. Scenario is System A -> XI -> System B .
What I want to know is:
1> What ports need to be opened?
2> Any service that I need to activate?
3> Do I need to install FTP server in any of the machine?
If I have missed something, please add.
Br,
Nilz

Hi,
1> What ports need to be opened?
mentioned in below link as said its 21.
2> Any service that I need to activate?
No
3> Do I need to install FTP server in any of the machine?
THere are two ways by which u can pick ur file.
1) NFS by which u can put the file on XI appplication directory and pick up ur file.
2) FTP u have to put ur file on FYP server and XI will pick up the file from there. U can use freeware FTP and install it on ur Desktop search on goolge u will get ti FTP installtion.
refer the below configuration requirement for FIle adapter.
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
ALso refer the end to end file to file scenario.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
chirag

Failed in Message Mapping for Sender SOAP Adapter

I am using a synchronous Sender SOAP adapter for sending SOAP messages using HTTP security protocol. I am trying to send SOAP messages to XI and then to RFC-R/3. And Responses back from RFC to XI and then to SOAP. I am getting an error for failed in message mapping in SXMB_MONI for converting SOAP messages to RFC. When I debug it in Message Mapping in Integration Repository, it works fine.
Any help is appreciated.
Thanks in advance!
Mrudula

Hi,
try to do a full cache refresh
regards,
Jakub

Alets for sender adapter

Similar Messages

Maybe you are looking for